Protein skimmer user manual
Contents
1. Bubble magus gt aA WWW BUBBLE MAGUS COM Protein skimmer user manual Product s name External type protein skimmer NAC 5E Valid aquarium 300 500 L Pump model ATMAN PH2000 Thank you for using BUBBLE MAGUS products please read User manual carefully before use Contain A suit of collection cup a suit of skimmer body a suit of drain water system one ATMAN PH2000 with needle wheel water pump one air intake tube one air intake kit amp user manual Installation 1 Install pump to body and screw down 2 Put collection cup on the neck of skimmer body also connect air intake tube and muffler as well 3 Hang the skimmer on the side or back of your tank and tighten the nylon screw until the skimmer is secured to the side of the tank Use first time 1 Rotary water outlet adjusted tube resorted to fully open outlet 2 Letaquarium water into body till water level equal with inlet outlet pipe 3 Close air valve and turn on pump The aquarium water will into body slowly and then open air valve and turning the water output adjusted tube to suitable position when water level in body closes to the neck red circle of skimmer The skimmer will work normal Normal use The skimmer start up and then stop pump work there are some water on the body and pipes The skimmer will be work immediately when you restart to pump and needn t operate as used first time But if body and pipe are empty as without water we still ha2. ubble magus com Bubble magus NAC WWW BUBBLE MAGUS COM Muffler Collection cup Water outlet adjusted tube fae Drain outlet Air valve j F ie C Skimmer body b Air intake tube AY aS GO Nylon screw ee a Hanged frame Q a n Water inlet ae Water outlet OH Sponge NACSE Installation sketch map Product will be improved continuously please understand the technical change isn t noticed Inquire product information please visit our web site www bubble magus com
3. ve to operate as used first time Notice 1 Please must open air valve after pump work otherwise the water will overflow out 2 Please make sure full water in the water pump before start it else it will be difficult to start up 3 If installation is correct it should appear much bubble quickly when pump start up If no bubble or pump makes a noise or strenuous shake please stop and restart up If it can t solve the problem please contact dealer or our technology person 4 Strictly prohibit pump operate without water 5 Every product tested before leaving factory so some water blob maybe leave on it It s not used vestige and wouldn t affect use 6 Just start to use a few days its result maybe is no very good this is a normal phenomenon After a few days it can be normal working if washing completely skimmer inside this time will be reduced 7 Please adjust bubble level according to aquaria s pollute Don t adjust water level too high avoid water quality fluctuate cause much water effused 8 Please wash collection cup at the fixed date if sludge heaped inside the collection neck it will affect used result Suggest cleaning skimmer body and pump every one or two month don t use chemical to clean protein skimmer 9 The bracket position should be 5 8cm from water surface Product will be improved continuously please understand the technical change isn t noticed Inquire product information please visit our web site www b
Download Pdf Manuals
Related Search