Installation Instructions
Contents
1. COATED BLACK Step 3 With all components mounted loosely adjust the system for overall aesthetics and clearance of frame amp bodywork MAGNAFLOW TAIL PIPE recommends at least 1 2 of clearance between ASSY the exhaust system and any body panels to prevent heat related body damage or fire Step 4 Once a final position has been chosen for the new system evenly tighten all fasteners from front to rear The supplied band clamps must be VERY tight to properly align the pipes and prevent leaks Approximately 65ft Ibs U bolt clamps should be tightened to approximately 30 35ft Ibs Inspect all fasteners after 25 50 miles of operation and retighten if necessary COATED BLACK Magnaflow Performance Exhaust recommends professional installation on all their products Magnaflow Performance Exhaust 22961 Arroyo Vista Rancho Santa Margarita CA 92688 02 08 12 Main 1 800 990 0905 Technical Support 1 800 959 9226 ext 45002. MAG LO INSTALLATION INSTRUCTIONS 17008 Mufflers Converters Systems and Tips PRODUCTS BLACK SERIES 2011 Ford F Series 6 7L Diesel Warning When working on under or around any vehicle exercise caution Please allow the 3X 4 00 vehicle s exhaust system to cool before removal CLAMPS as exhaust system temperatures may cause INLET PIPE severe burns If working without a lift always consult vehicle manual for correct lifting specifications Always wear safety glasses and ensure a safe work area Serious injury or death could occur if safety measures are not followed Step 1 First un bolt the OEM exhaust from the P EXTENSION PIPE catalytic converter at the 3 bolt flange You can now disengage the welded hangers from the rubber insulators and remove the exhaust system from the vehicle Do not damage the OEM rubber insulators as they will be reused to m mount the new system You may also cut the tailpipe behind the muffler to aid in removal of the system Step 2 Install the flanged inlet pipe to the catalytic converter outlet Crew Cab and Long Bed CC LB models require the 19 Extension Pipe shorter vehicles will now use the Muffler MUFFLER ASSY Assembly and appropriate clamps Leave all clamps loose for final adjustment of the complete system Install the Tail Pipe Assembly in a similar fashion using the supplied 4 00 clamps and by fitting the welded hangers into the rubber insulators
Download Pdf Manuals
Related Search