mp700z_3_en.vp:CorelVentura 7.0
Contents
1. info coeft it2. When applying for the repair always mention the serial number and the model of the equipment PACKING CONTENTS Carefully check the contents of the packaging and the completeness of the components If any of the parts listed hereunder is missing please contact your Dealer immediately MP700 Zoom complet unit This user manual 2 quick lock release omega brackets 1 connector XLR 3 pin male 1 connector XLR 3 pin female 1 connector POWER 1 safety chain equipped with two snaps PROTECT NATURE DO NOT DISPOSE OF THE PACKAGING IN THE ENVIRONMENT CAREFULLY KEEP THE BOX AND THE COMPONENTS OF THE PACKAGING FOR ANY DISPLACEMENT OR RE SHIPMENT OF THE EQUIPMENT Do not leave the packaging elements polystyrene nylon metal parts etc unattended they might be dangerous for children http www coef net info coef it Pag 3 1 0 DIMENSIONS amp POSITIONING zT SS Sass a Assembly to growed Montaggie a borra k a ah a i SRR RRR 2 0 TECHNICAL NOTES MP700 Zoom with Magnetic Ballast Code 02E005 MP700 Zoom with Electronic Ballast Code 02E006 e Lamp MSR 700 SA 700W 54 000 lumen e 16 bit movement resolution PAN 540 TILT 270 e PAN and TILT automatic repositioning e 9 rotating gobos all interchangeable and indexable on 540 e Zoom linear motorized from 11 to 24 zoom possibility manteining a costant focus e Focus motorized e 33 colors white bi colors e Linear dimmer from 0 to 1
3. A to the proper terminal of the transformer which supplies the electronic card assembled inside the base of the projector We recommend to update the serigraphy table with the new value ah TLis 3 3 PROJECTOR INSTALLATION To fix the MP 700 Zoom is necessary when the installation has to be on a raised from the ground support to block the quick lock release brackets of the unit by means of a screw provided with nut and locknut measuring not less than M10X50 to insert in the central pre arranged hole on the fixing bracket In addiction to the provided quick lock release omega brackets in order to guarantee a necessary security and in respect of the actual safety rules concerning the projectors installation it is compulsory to install a safety chain equipped with two snaps provided with the projector to connect the MP 700 Zoom s body to the fixing structure ATTENTION the safety chain equipped with two snaps which can be hooked to the two pivots placed under the base of the MP700 Zoom see part A must be properly installed and fixed to the supporting structure in a way that an incidental givin in of the main bracket would leed to the shortest possible fall of the projector After such an inter vention the safety chain must be replaced with another original part ATTENTION COEF is not responsible for installations not correctly made or made without respecting the above indications those installations are conside
4. 00 Electronic dimmer of lamp from 100 to 50 only electronic ballast version e Shutter motorized e Iris motorized e Adjustable strobe e Rainbow effect adjustable in speed e Black light filter e Optical system with multilenses system e Linear frost e Rotating 3 faces prism adjustable in speed for both directions e Multifunction display e Remote reset via DMX e Remote On Off lamp via DMX e Software upgrade via DMX with UNI PROG 8 Accessory e Automatic fault survey e Automatic ventilation adjustment with internal temperature survey Internal power factor correction e DMX 512 standard e Lamp lighted sensor e Over temperature protection e Absorbed power 230V ca 50Hz 4 1A e Weight 37 5 Kg with electronic Ballast 28 5 Kg Pag 4 http www coer it info coef it 3 0 INSTALLATION The constructor is not be considered responsible in case of e Improper use fo the unit or use by not trained staff e Use in contrast with the directions on work safety e Wrong installation e Defective power supply e Serious lacks in the necessary maintenance e Unauthorized modifications and interventions e Use of spare parts that are not original or not specific for the unit e Total or partial inobservance of instructions e Unusual events 3 1 LAMP MOUNTING OR REPLACING A WARNING read carefully e The unit mounts high pressure lamp e The unit is realized to use only MSR700 lamp absolutely don t use other types
5. DE1 MODE2 10 11 Pag 10 7 0 CHANNELS AND DIGITAL VALUES SHUTTER STROBE DIMMER 0 5 SHUTTER closed 151 156 6 100 DIMMER from channel 14 value 157 162 101 110 DIMMERO gt 100 Automatic 6 sec 163 168 111 120 DIMMER 100 gt 0 Automatic 6 sec 169 174 121 126 DIMMERO gt 100 slow Faster shutdown 1475 180 127 132 DIMMER 0 gt 100 middle Faster shutdown 181 186 133 138 DIMMER 0 gt 100 fast Faster shutdown 187 192 139 144 DIMMER 100 gt 0 slow Faster open 193 250 145 150 DIMMER 100 gt 0 middle Faster open 251 255 COLOR MODE 1 0 5 Neutral 116 125 6 15 Yellow 126 135 16 25 Blue 136 145 26 35 Magenta 146 155 36 45 Green light 156 165 46 55 Orange 166 175 56 65 Cyano 176 185 66 75 Pink 186 195 76 85 Red 196 200 86 95 Blu light 201 205 96 105 Green 206 230 106 115 Wood 231 255 COLOR MODE 2 0 5 Neutral 51 55 6 10 Yellow 56 60 11 15 Blue 61 180 16 20 Magenta 181 185 21 25 Green light 186 190 26 30 Orange 191 195 31 35 Cyano 196 200 36 40 Pink 201 215 41 45 Red 216 235 46 50 Blu light 236 255 GOBOS 111 120 0 10 Neutral 121 130 1 1 20 GOBO 1 chann 4 controls rotation 131 140 21 30 GOBO 2 chann 4 controls rotation 141 150 31 40 GOBO 3 chann 4 controls rotation 151 160 41 50 GOBO 4 chann 4 controls rotation 161 170 51 60 GOBO 5 chann 4 controls rotation 171 180 61 70 GOBO 6 chann 4 controls rotation 181 190 71 80 GOBO 7 chann 4 contro
6. Realized by PC CAD amp VIDEO MP 700 ZOOM Code 02E006 Electronic Ballast Code 02E005 Magnetic Ballast e OPERATING INSTRUCTIONS Printed in November 2001 Lighting Declaration of CE conformity We Manufacturer COEF srl Via Albinatico 80 82 51019 Ponte Buggianese Pistoia ITALY Declare that the product MP7OO ZOOM is in conformity with 89 336 EEC EMC directive and with the actual required safety standars in accordance with LVD 73 23 EEC Ponte Buggianese 10 October 2001 ATTENTION carefully read the directions of this manual Exclusively follow the safety rules in force and do not carry out assembly and or maintenance operations without taking all precautions as indicated in the different sections or without the necessary specialization This manual must always accompany the equipment therefore it must be available and readable at any moment if necessary Also in case of sale rent change of place and or ownership these documents shall be enclosed with the relative equipment ADVICES FOR A CORRECT INSTALLATION This equipment is destined to an exclusively Professional use 1 Make sure that all the fastening parts of the spotlight are in good condition Regulate the proportions of the fastening acces sories screws bushes nuts supports etc in order to be slightly over dimensioned as compared to the actual requirements 2 Carefully check the contents of the packaging and the completeness of the comp
7. he Table of Section 6 0 in the following page By each pressure Button MENU E permits to go backwards by one level G and H DOWN and UP buttons select functions and sub functions Button F ENTER enters the function and confirms a control By pressing Button MENU E and buttons UP and DOWN H and G you can select the menu you have to mo dify Once the wished menu is reached press Button F ENTER to confirm your selection and enter the function Press G or H to enter the sub functions if available Always confirm your selection with ENTER Press MENU to go out of the function and press again to go back to the starting level Example We installed our projector on the ceiling and for this reason we want the visualization of the display to be correct Press MENU Press H UP 11 times up to MISC Press ENTER the Display will show RSET Press H UP twice up to DSPL Press ENTER the Display will show ONOF Press H UP once up to STRV Press ENTER the Display will show STND this is the actual configuration state Press H UP once up to R E V the blinking point indicate the available configuration Press ENTER The Display visualization as been rotated to 180 Press MENU 4 times to return to starting MENU The indication of the display will automatically come back after 120 sec and inform on the set starting channel DMX If we are now in a sub function this automatic device will not a
8. heating of the equipment In the figures you can see those components that can easily accumulate dust and grease Clean them using a soft cloth and common glass cleaners 10 1 EXTRAORDINARY MAINTENANCE WARNING switch off the projector before operatinc To make an extraordinary maintenance it is necessary the presence of a generic or qualified mechanical operator according to the type of the needed intervention In order to make its use easier we advise you to completely draw out the mechanic unit of the zoom and focus movements as follows disconnect the two motors connectors B and C and the fan connector D remove the 4 screws part A and carefully extract the whole mechanic unit Clean ca refully the indicated parts Once the frame with the Zoom Focus mechanic unit has been removed it is possible to clean the parts which are usually difficult to reach Reassemble the Zoom Focus unit carefully being sure in particular that the blade with prism and frost is positioned between the two lenses of the Zoom Focus unit Remember then to connect again the 2 motors and the fan to their connectors http www coef net info coef it Pag 13 You must particularly take care of the sensors which are really fundamental in the unit working The sensors are absolutely necessary when a general reset of the projector is needed If this function is not cor rectly executed it will totally compromise the regular work
9. ing of the projector at least for the group referred to the sensor itself MCLEAN PULIRE The sensors of the encoders concerning the PAN and TILT movements are located in the base and in the arm of the MP700 Zoom respectively The pictures clearly show how you can reach these components and where you can correctly operate for their maintenance Another place where grease and dust settle is inside the lamp box Carry out the following operations in order to clean unscrew but not completely the 4 screws on the side of the fin unit located on top of the bulb draw out the full fin unit clean the antiheat filter and the parabola of the bulb assemble the fin unit again by inserting first the part next to the lamp board and then the 4 screws in their seat tighten carefully Pag 14 http www coef it info coef it 10 2 ELETTRONIC MAINTENANCE WARNING switch off the projector before operatinc This section is dedicated in detail to the electronic connections between the card and the mecha AN nical components assembled in the projector These informations will be absolutely necessary when the mechanical unit has to be removed from the projector for maintenance and or repair The connections are made using handy connectors and are detailed in figure where you can find indications about the connection between a specific connector and a specific component of the mechanical unit This includes the motors and the sensors of the vari
10. ion GOBO6 chann 4 controls position GOBO7 chann 4 controls position GOBO 8 chann 4 controls position GOBO9 chann 4 controls position GOBOS Random fast GOBOS Random slow CW Rotation adjustment CWW Rotation adjustment info coeft it CH 12 13 14 15 EFFECTS Frost Prism 0 5 6 20 21 40 41 60 61 80 81 170 171 255 IRIS 0 5 6 130 131 150 321 250 251 255 DIMMER 0 5 6 250 251 255 Neutral Automatic FROST from 0 to 100 velocity adjustment Automatic FROST from 100 to 0 velocity adjustment Frost Prism 3 faceted CW PRISM rotation with velocity adjustment CWW PRISM rotation with velocity adjustment Open Neutral IRIS with manual regolation 100 0 IRIS closed IRIS 0 100 IRIS 100 0 IRIS 0 100 0 slow IRIS 0 100 0 middle IRIS 0 100 0 fast IRIS 0 100 0 random DIMMER Closed DIMMER regolation DIMMER Open WARNING position CHANNEL 1 at a value between 6 and 100 in order to control DIMMER with this channel DIMMER Electronic only Electronic Ballast Code 02E006 0 5 6 250 251 255 Light at 50 Light from 50 to 100 Light at 100 7 1 SPECIAL ACTION When the lamp control via DMX CDMX and the reset via DMX RDMX function have been activated in the configuration menu it s possible by a combination of the channels values to control the lamp switch ON OFF or to allow the projector MASTER RESET Lamp ON via DMX CHANNEL 2
11. ion GOBOS HOME Conversion filters TEST Conversion filters FCUS ZOOM Fine regulation of the CONVERSION FILTER position HOME HOME Focus trolley TEST TEST Focus trolley HOME HOME ZOOM trolley TEST TEST ZOOM trolley HOME Prism Frost TEST Prism Frost RPRS IRIS LAMP Fine regulation of the PRISM position TEST TEST of the Prism rotation HOME HOME Iris TEST TEST Iris HOME PAN movement TEST PAN movement STND REV Switch movement direction DX SX ON OFF ON OFF the automatic repositioning of the PAN HOME TILT movement TEST TILT movement STND REV Switch movement direction UP DOWN CH1 CH14 CH15 ONOF ON OFF CH15 Electronic Ballast only ON OFF AUTO ON OFF the automatic repositioning of the TILT DMX value for the indicated channel Lamp ON Lamp OFF LAMP OFF after 1 hour of no change on DMX CDMX NO YES LAMP switching on by DMX control MASTER HOME Starting RESET YES NO MASTER HOME via DMX control Display on Display off STND REV 180 rotation of the visualization display ON OFF STND SWAP Channel control switch PAN TILT YES NO automatic value YES Electronic Dimmer ON Can 15 Electronic Ballast Show the installed software version http www coef net info coef it Pag 9 CH MO
12. lamp Just to wait for little of time Make sure that the projector is correctly configurated Replace or repair the DMX cable Check the control unit amp DMX cable Check the control unit by means of other working projectors Technical aid is required Defecting projection Projection with halo gt Re The lens is broken Dust or grease stored on the all parts of projector Dust or grease stored on the all parts of projector Check that the lens are not broken Remove dust or grease stored on lenses Carefully clean the optical group lenses and the projector components see Main tenance chapter doesn t coincide to the selcted alue Ahr PAN or TILT movement PAN or TILT movements The projector does not carry out I he automatic repositioning of the Pag 16 Defective motor Electronic board Defective motor Electronic board ENCO off in the PAN TILT confi guration menu cap 6 0 http www coet it N ie color or other effects doesn t Position sensor dirty with dust or coincide to the selected value grease Carefully clean the optical group lenses and the projector components see Main tenance Technical aid is required Carefully clean the optical group lenses and the projector components see Main tenance Technical aid is required Set ON ENCO Function of PAN TILT con figuration menu cap 6 0
13. ls rotation 191 198 81 90 GOBO 8 chann 4 controls rotation 199 205 91 100 GOBO 9 chann 4 controls rotation 206 230 101 110 GOBO 1 chann 4 controls position 231 255 ROTATION GOBOS 0 5 STOP 6 255 From 0 to 540 GOBO positioning 6 130 CW Rotation adjustment of the GOBO 131 255 CWW Rotation adjustment of the GOBO PAN MOVEMENT PAN MOVEMENT FINE ADJUSTMENT TILT MOVEMENT TILT MOVEMENT FINE ADJUSTMENT COLOR FILTER CONVERSION 0 79 Neutral 80 169 Conversion 3400 K 170 255 Conversion 5600 K FOCUS ADJUSTMENT 0 255 Linear FOCUS adjustment LINEAR ZOOM ADJUSTEMT 0 255 Linear ZOOM adjustment http www coef it DIMMER 100 gt 0 fast DIMMER 0 gt 100 gt 0 slow DIMMER 0 gt 100 gt 0 middle DIMMER 0 gt 100 gt 0 fast Strobe lamp from 1 to 6 random Strobe lamp from 1 to 6 random Strobe lamp from 1 to 6 random STROBE Speed adjustment SHUTTER open Faster open reg 0 0 0 5 sec reg 0 6 1 5 sec reg 1 6 2 5 sec White Yellow Yellow Blue Blue Magenta Green light Orange Orange Cyano Cyano Pink Red Blue light Blue light Green Random full color slow Random full color fast CW Rotation adjustment CCW Rotation adjustment Green Wood Positioning Random fast Random middle Random slow Random very slow Random very fast CW Rotation adjustment CCW Rotation adjustment GOBO2 chann 4 controls position GOBO3 chann 4 controls position GOBO4 chann 4 controls position GOBO5 chann 4 controls posit
14. of lamp The lamp must be changed if damaged or deformed by heat e Switch off the projector before operating e Wait at least 15 minutes after the projector has been switched off before operating again in order to let it cool down and avoid the lamp explosion e Wear protection gloves and glasses e Dont look directly the lamp e Read carefully the lamp builder s instructions COT Wait 30 minutes in order to avoid burns Unscrew with a cross screwdriver the first screw A for a single turn unscrew the second one completely B unscrew completely the screw A and to remove the cover that supports the lampholder Insert delicately the lamp in the projector support driving it with the round cover Pay attention the lampholder s wires must correctly reenter in the projector Block the cover screwing the screws up part A B http www coef net info coef it Pag 5 3 2 VOLTAGE ADJUSTMENT bd Ni WARNING switch off the projector before operating Attention the change of tension can be carried out on the model with Electronic Ballast only The tension value suitable for the projector is shown in a table placed in the board of the base of the MP700 Zoom A flag marks the values preset for your equipment It is possible to modify these settings according to the country where the MP700 Zoom is going to be installed only for the model with Electronic Ballast just by shifting the cable with faston device part
15. onents If any of the parts listed hereunder is missing please contact your Dealer immediately 3 Do not install the projector outside where the influence of atmospheric factors could damage the unit working rain wind intense heat etc or indoor if there is a high percentage of humidity 4 Do not clean the projector using water jets or immersion in different liquids Scrupulously follow the indications given in the chapter MAINTENANCE 5 Make the electric connections and the installation replacement of the lamp after having disconnected the power supply and after haved positioned the power switch to OFF The apparatus is classified as belonging to Class 1 type of protection against elec tric shocks Its connection to an earthed mains unit is compulsory The equipment must be protect by an adeguated magneto thermal switch You are recommended to equip the system with aptly dimensioned differential switches 6 Do not touch in any case the internal and external parts of the projector without previous authorization of the constructor and make modifications only by the intervention of qualified staff 7 Make sure that the projector is correctly fixed on the support as indicated in par 3 3 8 If the bulb explodes the particular design of the apparatus prevents the splinters from going outside the projector All the parts therefore shall be complete and perfectly assembled The lenses if visibly damaged shall be replaced by original spare part
16. ous effects wheels color gobos prisms shutter etc WARNING An improper use of this documentation made by not specifically qualified staff can damage irremediably the electronic and or mechanical components of the projector ee oP ee lt i 116 He te ae i nafy A LLL Eee SELE 1 Motor SHUTTER STROBE 15 Sensor PAN 2 Motor COLORE wheel 16 Sensor TILT 3 Motor GOBOS wheel 17 S1 Sensor COLOR wheel 4 Motor GOBOS Rotation 18 S2 Sensor GOBOS wheel 5 Motor EFFECTS wheel 19 S3 Sensor GOBOS Rotation 6 Motor ZOOM 20 ON OFF Lamp only Magnetic Ballast version 7 Motor FOCUS 21 Electronic Ballast connector 8 Motor CONVERSION FILTERS 22 LIGHT Sensor NTC Sensor 9 Motor IRIS 23 POWER Connector 10 Motor PRISM Rotation 24 Faston GROUND connection 11 Motor TILT 25 DMX IN OUT 12 Motor PAN 26 Head FAN 13 Encoder TILT 27 Base FAN 14 Encoder PAN 22 Alimentamone Power JA 2BVAC gt 5 5 4 2BVAC 5 http www coef net info coef it Pag 15 11 0 TROUBLESHOOTING PROBLEM The projector swiches on but doesn t answer to commands The lamp is not working The thermal switch is active Wrong DMX configuration Defective cables LED A is off Defective control unit LM The projector doesn t swich on The power supply is not present Check if the luminous indicator is lighted or not Replace the
17. red dangerous Pag 6 http www coef it info coef it 4 0 POWER SUPPLY CONNECTIONS WARNING In order to guarantee the utmost safety connect the apparatus only to a properly earthed mains system The projector is designed to work at the tension and frequency indicated by the electrical data la bel on the rear Before connecting the projector to the mains a qualified electrician must check its conformity The projector must be protect by an adeguated magneto thermal switch Don t power the unit with a dimmer circuit Power indicated in the the serigraphy table tollerance 5 10 Should there be different electrical characteristics or special steps to be carried out please contact COEF by telephone or e mail elettronica coef it Supply the projector by connecting it as indicated in picture PHASE F GROUND ji i MEUTAL T T 4 1 DMX 512 CONNECTIONS Connect the projector and the control unit to a wire in conformity with the EIA RS 485 standards braided bipolar shielded 120 ohm of characteristic impedance 22 24 AWG equipped with Cannon 3 Pin XRL plugs Respect the DMX 512 signal input and output according to the panel indications A terminal pin with 120 ohm resistance 1 4 Watt minimum must be inserted between the terminals 2 and 3 in the last piece of apparatus FROM CONTROL UNIT d EI Womo proietion dalla cabana OW The last projector of the OME cham z Pag 7 http www coef ne
18. s 9 Minimum distance from illuminated objects The projector must be positioned in such a way that objects struck by the light beam are located at least 2 metres from the projector objective 10 Minimum distance from inflammable materials 0 3 meters 11 MAX ambient temperature 40 C 12 MAX external surface temperature 90 C 13 Don t look directly the lamp trough the lens 14 We recommend not to look at the lamp without wearing a proper protection also ensure that the covers are assembled to the equipment 15 Inside the equipment there are high temperatures and tension current values which might be very dangerous It is necessary to disconnect the equipment from the mains before removing its protection covers and wait for 30 minutes at least before touching any part inside 16 Do not switch on the equipment if its lamp is not inserted 17 Leave sockets and air outlets free from encumbrances and clean them periodically see Maintenance section 18 Do not leave the packaging elements polystyrene nylon metal parts etc unattended they might be dangerous for children Pag 2 http www coef it info coef it This manual has been organized in order support the user the installer or the maintenance operator of the de scribed unit with those necessary informations for a correct use of the installation and working procedures of the same unit The various procedures will be just signalled by indicators when necessar
19. ssume control Pag 8 http www coef it info coef it 6 0 MENU FUNCTION amp SUB FUNCTIONS default_value factory assigned MENU FUNCTION SUB FUNCTION DESCRIPTION DMX RGOB 1 498 Magnetic 1 497 Electronic SHOW KH H DMX start channel Lamp working hours KH thousands H hours RST GO Lamp working hours reset confirm by ENTER SHOW KH H Projector working hours KH thousands H hours No error EEPROM failure Malfunction of the COLOR motor sensor Malfunction of the GOBOS motor sensor Malfunction of the GOBOS ROT motor sensor Malfunction of the PAN motor sensor Malfunction of the TILT motor sensor No ignition of the lamp beyond 3 attempts break Malfunction encoder PAN Malfunction encoder TILT Checksum Setup not valid Lamp working hours for more than 500 hours LAMP start beyond 1 attempts attempt to warmth or exausted lamp HOME SHUTTER TEST SHUTTER Fine regulation of the closing shutter Reserved HOME COLOR TEST COLOR OFF ON Color change in black out position MOD1 MOD2 Color switching or linear wheel motion P 1 P20 Fine regulation of the COLOR position P1 P20 HOME GOBOS TEST GOBOS OFF ON GOBO change in black out position HOME P1 Fine regulation of the NEUTRAL GOBO position HOME Rotation GOBOS TEST TEST Rotat
20. t info coef it 5 0 SPECIAL FUNCTIONS AND PROJECTOR ASSIGNMENT On the front panel of MP700 Zoom you ll find a section for the additional functions and for setting the projector Following the picture you can see all the offered possibili ties in detail All operations are to be carried out with the E F G H but tons respectively indicated as MENU ENTER DOWN and UP The display D will inform you about the selected functions The 3 A B and C leds will allow you to know A reception of the DMX line B lamp ON C errors indicated on the ERR table see table 6 0 On switching the projector on the display will indicate the type of projector and the version of control software which have been installed To this purpose please remember that this type of projector belongs to a new generation of projectors designed with the possibility of updating the software version through the normal DMX connection by means of a programmer deliberately created UNI PROG 8 After the indication MSTR HOME the projector carries out the RESET and gets ready to be controlled from the connected console The display will indicate 1 as default value This means that the first channel occupied by the projector will re spond to the values sent to channel 1 by the DMX line This enables us to make MP700 Zoom which we are instal ling completely independent from control or integral with any other installed projector General Rules Refer to t
21. value 0 CHANNEL 3 and CHANNEL 4 value 0 gt 255 gt 0 Lamp OFF via DMX CHANNEL 2 value 255 CHANNEL 3 and CHANNEL 4 value 0 gt 255 gt 0 MASTER RESET CHANNEL 1 value 0 CHANNEL 2 and CHANNEL 3 value 0 gt 255 gt 0 http www coef net info coef it Pag 11 8 0 LAMP ADJUSTMENT e Don t look directly the beam trough the lens e The lamp is pre regulated by the factory Only fine adjustment Don t move the screws C up to upper or lower extremities Lamp adjustment is necessary to obtain a uniform and powerful light beam Switch on the projector and set the channels without gobo and colors Adjust the three screws C until you reach the ideal condition between power and homogeneity 9 0 GOBOS REPLACEMENT Open the cover of MP700 Zoom by the 4 fast screw The gobo wheel of the MP 700 Zoom contains di chroic gobos They are interchangeable simply by remo ving the little elastic ring with a screwdriver see figure In order to replace a dichroic gobo with a steel gobo put a thick ring between the gobo and the elastic ring Insert the chosen gobo and place again the steel ring paying attention that it reaches its correct position Pag 12 http www coef it info coef it 10 0 ORDINARY MAINTENANCE Ordinary maintenance on the projectors MP 700 Zoom is necessary to maintain the perfect effi ciency of the unit and to avoid defects like the low luminosity of the light beam or the elevated over
22. y evidencing the operation dangers and the necessity of technical support Please find here below a list of symbols and relative meaning OPERATOR Not particulary qualified staff that can operate when no specific knowledge is required COEF OPERATOR Technical staff qualified and trained by the constructor for repair and extraordinary operations TY MECHANICAL OPERATORS Staff employed in the ordinary mechanical maintenance SPECIALIZED MECHANICAL OPERATOR Qualified staff employed in extraordinary authorized in stallations and repair SPECIALIZED ELECTRIC OPERATORS Qualified staff employed in extraordinary authorized instal lations and repairs f DANGER SIGNAL Generic dager signal and electric shock danger signal GENERAL WARRANTY CONDITIONS e The guarantee is valid for a period of 12 months from the date of purchase of the equipment e The parts which are proved to have manufacturing defects are also covered by the guarantee The external parts of the equipment its removable elements and lamps are excluded from the guarantee for these parts we recommend to follow the directions supplied by their manufacturers The guarantee is not valid in case of tampering or repairs carried out by non authorized personnel The replacement of the equipment during the validity of the guarantee is not provided for The transport freights from and to the manufacturer for repairs under guarantee are at Customer s charge
Download Pdf Manuals
Related Search