微型录像笔使用说明书 - Camera2000.com
Contents
1. key at the third time Illumination LED and IR LED are off Note Please turn on IR LED if you are in the lightless environment Time Video files with time watermarks the recording time can be recorded correctly when it is video recording it also can be modified we didn t adjust the time of device when it came from factory if you found it is not accurate it s easy to adjust by yourself just use the USB cable and connect the device to the computer at the same time run the CD ROM copy the file Time txt into root directory of mobile hard disk modify the time and pull out device from computer then restart the device and power off The modification of time is finished PC Camera Press the key and insert the computer USB then you can enter the PC Camera Mode Charging In the course of using if red light twinkling constantly please recharge the battery timely the machine with the standard USB2 0 interface can use computer USB port to recharge can also use DCSV charger to recharge if the red light is twinkling it means itis charging When red light stops twinkling and then keeps on red it means the recharging finished please pull out the machine from computer in time to prevent batteries being damaged FAQ Q Why it does not have any response after pressing the Q and button continuously A Because all operation needs going back to the standby mode then we can do the next step The particular op2. shortly Q button once the green light is on now it is in the mode of video recording In the video recording mode press shortly button once two seconds later the red light is on video files will be saved automatically the device automatically returns to standby mode if you want to record again just repeat the above operation Sound REC In the standby mode press button for two seconds the red light and the green light are on at the same time now it is in sound recording mode In the sound recording mode press shortly button once two senconds later the red light is on sound redording files will be saved automatically the device automatically returns to standby mode if you want to record again just repeat the above operation Taking photo In standby mode press shortly button once then the green light will twinkle once it indicates the device has finished taking photos and automatically return to the standby mode If you want to take photo again just repeat the above operation Power off In any mode press the key for two seconds all lights will turn off it indicates the device has been shut off Illumination or IR press shortly key once illumination or IR LED is on press shortly key again illumination or IR LED is off Illumination IR press shortly key at the first time Illumination LED is on press shortly key at the second time Illumination LED is off IR LED is on press shortly
3. User Manual Thank you for using our company s products please read the user manual carefully before use it When you start to use this device we believe that you have read the user manual carefully gt Attentions x Secure Startup avoid turning on the device in the very dry or humid environment to prevent damaging of the device Using qualified maintenance services only qualified maintenance personnel can repair the device Please do not dismantle the device by yourself Connected to other devices when connected to other devices please read the user manual to obtain detailed safety instructions do not connect other device that is not equipped with this device Back Up Important data of this device please do a back up any incorrect operational methods resulting in paper loss the Company shall not be responsible for Me tes a Video recording Sound recording Stop Tum 0 nA ff Taking photo OLED On ff R eset OTF card Slot M iniUSB Cam era LED Light IR LED Light Operation Instruction Note The following operations are required to operate in standby mode and ensure that the identified T Flash card was inserted to the card slot properly Power on Press the button for three seconds the red light and the green light are on at the same time untill the green light is off it indicates the device is turned on and has entered standby mode Video REC In standby mode press
4. eration is written in the manual Q Why the time watermark is not accurate enough after updating the system time A Because the battery support the working of system time Please do not exhaust the battery and charge the battery in time or keep the battery full and adjust the time before you use it Q Why I can not find the mobile hard disk after the device is connected to the computer A Please confirm your computer s operating system It can identify and install the corresponding drivers automatically in WINDOWS98SE ME 2000 X P MAS OS LINUX WINDOWS98 system need to install drivers which is recorded in the CD ROM Q Why the picture is not so clear A The device have not shake resistant function Please keep not shake your hands and the object
Download Pdf Manuals
Related Search