User`s Manual - Providence
Contents
1. Povidence SONIC DRIVE SDR 5 USER S MANUAL Thank you very much for purchasing the PROVIDENCE SONIC DRIVE Providence products are born from the process of solving various problems and satisfying the desires of our many users The Providence technology is fused with the needs of our actual users to develop unique and practical products Before each product is com pleted stringent testing is repeatedly carried out with an eye toward pursuing products that guarantee high relia bility but with the emphasis on musical sound quality To provide years of trouble free use read this User s Manual thoroughly before using the SONIC DRIVE Features The Providence Sonic Drive is a responsive overdrive effect that gives the guitarist extraordinary expressive capability in a wide range of playing situations from rhythm to lead Even with distortion applied excellent definition and balance are achieved from the first through sixth strings At lower gain settings it s possible to pound out powerful chords with fast attack and a wild edge that stands out clearly from a wall of sound Turn up the gain for a smoother lead sound that responds intimately to picking nuances In a normal True Bypass circuit in bypass mode the audio signal passes through two switch contacts But in the SONIC DRIVE in bypass mode the audio passes through a single contact thanks to a single contact true bypass circuit The result is much higher sound quality and reliability t2. han that provided by previously existing products The FAT switch provides low range control Turning ON the FAT switch increases the low range gain resulting in a fatter sound Due to the adoption of the new double contact grounding circuit D C G Circuit by inserting a monaural plug into the output jack the shield sleeve of the plug provides two points of contact to the pedal s ground circuit By increasing the area of the point of contact it becomes more difficult for a loose connection to occur and provides the additional advantage of improved sound quality The LED in the SONIC DRIVE doesn t just indicate the ON OFF status of the effect it also functions as a battery voltage moni tor If the battery voltage drops to less than about 7V the LED starts to go out In this case the pedal effect is still output but the battery should be replaced to ensure sufficient operation MRecommended Settings HWild Drive Sound BIHEAVY Drive Sound E Main Specifications LEVEL 5 o clock MAX LEVEL 2 o clock Controls LEVEL TONE DRIVE FAT Switch TONE 1 o clock TONE 1 o clock ks Standard 1 4 inch phone jacks Input Output eae DHIE E O CIoek Jacks Sta phone j put Output FAT Switch OFF FAT Switch ON DC9V Input jack AC adaptor jack Power 9V battery 1 AC adaptor LEVEL DRIVE LEVEL DRIVE Power consumption DC9V approx 8mA with effect turned ON Size 115 D x 72 W x 50 H mm TONE TONE Weight Approx 250g withou
3. i Chuo Tsurumi ku Yokohama shi JAPAN 230 0051 TEL 81 45 510 4060 FAX 81 45 510 4061 E mail overseas1 pacifix ltd com URL www providence Itd com Rev 1 0
4. t battery installed FAT FAT E Battery Replacement om e Remove the 4 screws from the back cover to replace the battery Use a 9V 6F22 MN1604 type replacement battery When changing the battery do not pull strongly on the battery cable This could result in disconnection or malfunctioning of the device Caution When connected to an amp and speaker with the power turned on do not insert or remove plugs in the input or output jacks Doing so may cause sufficient noise to damage the speaker lf the pedal should fail to work or if it works abnormally please contact the place of purchase or Pacifix Ltd f the pedal is not used for an extended period of time please remove the battery to prevent leakage which could damage the pedal A battery should be inserted into the pedal even when using an AC adaptor By doing so if the AC adaptor plug should be inadvertently disconnected power will continue to be supplied by the battery to provide uninterrupted performance An AC adap tor with a regulator circuit is recommended the battery voltage becomes too low the pedal effect may become weak the output level may drop or no sound may come out of the pedal In that case please replace the battery with a new one E Troubleshooting LED doesn t light Replace the battery with a new one X Designs and specifications are subject to change without notice PACIFIX LTD PPD1002 01 SOUND PRODUCT amp SYSTEM DESIGN 3 21 7 Tsurum
Download Pdf Manuals
Related Search