User Manual
Contents
1. 2 e When Magnet is removed from Marked area device Starts to work e When device started to work compination LED will show the process e If everything is OK device will send predefined SMS to predefined number e Then device goes into sleep mode Usage of device on Trap 3 First White LED will start to blink FAST It shows that GSM module is started First RED LED will light This shows CPU is started e Second RED LIGHT will light This shows that device is connected to GSM Network and preparing the SMS Only 3rd RED Light will light Shows that device sended SMS and sleep mode a ee ey When not in use e Itis sufficient to remove security key from the device It is better to have battery FULL even not in use In case of problem March 2013 MFNode Mini IBM Internal Use only V1 17 Possible problems 1 1st RED Led is on but White LED is not Battery is emplty of faulty battery e Please charge the device and try the device 1st RED LED is on but WHITE LED is blinking fast and 2nd RED LED is not on sonmeye devam ediyor ve 2 Kirmizi LED yanmiyor Possible GSM Network is weak or in valid SIM card e Simplest test is to call the GSM number which is written at the bottom of the device If device is reachable GSM Network is OK 1st RED led is ON WHITE Led is blinking slowly but 2nd2. MFNodeTrap SMS User Manual www mfnode com The Team e Design and Implementation Ates Yurdakul atesh puaga com Application and User Interface Reha Yurdakul reha rehayurdakul com IT Architect IBM Tur Contents MFNode Trap SMS Device Capabilities Additional parts Important notes Usage Charging Usage of Trap When not in use In case of problem Possible problems Contact Trap SMS March 2013 MFNode Mini IBM Internal Use only Vi 4 Device e Device is designed to send SMS to predefined GSM number when magnet removed from marked area e In order to avoid in expected activities also a activation key had been included e Device also contains a charging capability for the internal battery from any USB source but special cable is required Capabilities It being activated when magnet removes from marked area on the box It does not consumes any energy as long as magnet is placed or security key not inserted The box itself is water resistive The GSM number and message can be changed by customization Additional Parts Security Key e This key had been included in order to avoid activation of the device when not reguired Unless that key inserted device will never work Additional Parts Key Magnet This device had been designed to operate when this magnet had been removed from mark
3. RED Led is OFF Possible a program error in the device e Please remove and re insert Security key 1st RED led is ON WHITE Led is blinking slowly but 2nd RED Led is ON and stay like this Possible a program error in the device e Please remove and re insert Security key also please try again in a place with better GSM Recepsion arch 2013 Contact reha rehayurdakul com atesh puaga com MFNode Mini IBM Internal Use only V1 1 9
4. ed area In fact this item is ordinary magnet Any kind of magnet can be used to replace this key which is suitable for your needs But very strong Neodium magnets SHOULD NOT be used and can damage the devices permanently Additional Parts Charger e Charge device is 2 parts Charge adapter Special Charge cable e When needed any USB source ie USB port of notebook can be used Important Notes When connection Charge Cable or Security Key be carefull to match index of both en a Please try to use the charger supplied with device Please remove the security key when device is not in use Please monitor the device when charge process in place Usage of the Device March 2013 MFNode Mini IBM Internal Use only V1 11 Charging the Device e Device can be charged as shown in photo Charge cable connected Key Magnet in place e The Red light will be on when charging is started e The Green light will be on as long as charge in place e When battery is completely charged Red light to be ON but green light wil be e Please monitor the device when charge process in place Usage of device on Trap e To use device security key should be inserted Otherwise device will not start to work even magnet key removed e When device is ready there is no Light is ON in order to preserve energy Usage of device on Trap
Download Pdf Manuals
Related Search