Philips HTS8141 User Guide Manual Pdf
Contents
1. 7 s 9 AUDIO SYNC 1 Press and hold AUDIO SYNC until AUDIO SYNC XXX is displayed e XXX denotes the delay time 2 Within five seconds press VOL to set the delay time for audio output Note e Ifthe volume control is not used within 5 seconds it resumes normal volume control function e The default setting for PBC is on To change the default setting see chapter Adjust settings Preference Setup gt PBC for details 26 EN Downloaded From TheatreS ystem Manual com Manuals Quick skip play to a specific time 1 During playback press GJ INFO The disc status menu is displayed 2 Select the current elapsed playing time in the menu then press OK e TT Time title time e CH Time chapter time e Disc Time disc time e Track Time track time 3 Press the number buttons to change the time where you want to skip to then press OK Downloaded From TheatreS ystem Manual com Manuals Play DivX video DivX video is a digital media format that retains high quality despite a high rate of compression This unit is DivX Certified that allows you to enjoy DivX video 1 Insert a disc or USB that contains the DivX videos 2 Press DISC MENU or USB A contents menu is displayed W Select a title to play then press AI 4 Use the remote control to con2. e Some DVDs have ratings printed on them but are not recorded with ratings This function has no effect on such DVDs Tips e To set or change your password go to Preference Setup gt Password EN 43 English Adjust settings PBC For VCDs SVCDs recorded with PBC playback control you can access the disc contents through an interactive menu e Qn an index menu is displayed when you load a disc for play e Off skip the menu and start play from the first title MP3 JPEG Nav Turn off or on MP3 WMA folder display when you play a media that contains MP3 WMA files e With Menu display the folders of MP3 WMA files e Without Menu display all the files Password Follow the instructions on the TV to set or change the password for locked discs and play restricted DVDs Change Password Old Passwora New Password Confirm PWD OK 1 Press the number buttons to enter 0000 or your last set 4 digit password at Old Password field 2 Enter the new password at New Password field 3 Enter the new password again at Confirm PWD field 4 Press OK to exit the menu Note e If you forget your 4 digit password enter 0000 before you set a new password 44 EN Downloaded From TheatreSystem Manual com Manuals DivX Subtitle Select a character set that support
3. Preference Setup 3 Select an option then press OK Preference Setup Audio vi Subtitle KQ Disc Menu Parental LJ PBC MP3 JPEG Nav gg Password DivX Subtitle v e See the explanations of the above options in the following pages 4 Select a setting then press OK e To return to the previous menu press gt BACK To exit the menu press EJ OPTIONS Downloaded From TheatreS ystem Manual com Manuals Audio Select the default audio language for DVDs Subtitle Select the default subtitle language for DVDs Disc Menu Select the menu language for DVDs e Ifthe language you have set is not available on the disc the disc uses its own default language e For some DVDs the subtitle audio language can only be changed from the disc menu e To select the languages that are not listed in the menu select Others Then check the Language Code list at the back of this user manual and enter the respective 4 digit language code Parental Restrict access to DVDs that are unsuitable for your children These types of DVDs must be recorded with ratings 1 To start press OK 2 Select a rating level in the menu then press OK 3 Press the number buttons to enter your 4 digit password e Rated DVDs above the level you set in Parental require a password to be played e The ratings are country dependent To allow all discs to play select 8
4. General Setup EasyLink Auto Wake up TV Disc Lock System Standby d Display Dim Ll 40 00 System Audio Control OSD Language Audio Input Mapping Screen Saver Sleep Timer Standby Mode DivX R VOD Code e Auto Wake up TV and System Standby functions are turned on by default in the factory 5 Select System Audio Control gt On then press OK 6 Select Audio Input Mapping then press OK 7 Select OK in the menu then press OK to start scanning of devices Once complete audio input mapping menu Is displayed Select a play source On the main unit Audio Input Mapping AUX1 Input Yo AUXz2 Input d AUX3 Input Digital Input TV Other non HDMI 1 Press SOURCE repeatedly to select DISC gt USB gt DOCK gt RADIO FM gt RADIO AM MW gt OPTICAL INPUT gt DIGITAL INPUT gt AUX1 INPUT gt AUX2 INPUT gt AUX3 INPUT gt MP3 LINK gt DISC 8 Select the audio input of this unit that is P used to connect to other HDMI device e g AUX1 Input AUX2 Input then press gt l On the remote control 9 Select the correct connected device then press OK e Repeat steps 8 9 to map other Cus T rano AE roa voc connected devices i T 10 To exit the menu press EJ OPTIONS O e Press DISC MENU to switch to DISC mode e Press USB to switch to USB mode e Press RADIO to switch t
5. Select the source you wish to control by pressing the DISC MENU USB RADIO or AUDIO SOURCE or iPod DOCK button 2 Then select the desired function for example M Pl Navigate through the menu 1 Point the remote control directly at the remote sensor on this unit and select the desired function 2 Use the following buttons on the remote control to navigate through the on screen menus Button Action AV Move up or down lt gt Move left or right a Confirm a selection Enter numbers B Hi Find the correct viewing channel Note e Before you start remove the door stop tag on top of the disc compartment door Press C to turn on the DVD Home Theatre unit Press DISC MENU to switch to disc mode U N Turn on the TV and switch it to the correct video in channel e You may go to the lowest channel on your TV then press the Channel Down button on your TVs remote control until you see the Video In channel e You may press 2 button repeatedly on your TVs remote control e Usually this channel is between the lowest and highest channels and may be called FRONT A V IN VIDEO etc Tips e See TVs user manual on how to select the correct input on your TV Downloaded From TheatreS ystem Manual com Manuals Start Ambisound setup When you tum on this unit for the first time follow the instructions on the TV to
6. e Disconnect this Home Theater System from the power outlet for a few minutes then connect again e Ensure that the interconnect cable from the subwoofer is connected to the Home Theater System Downloaded From TheatreS ystem Manual com Manuals It takes a long time for the Home Theater System to power up e This green product has low standby power consumption which requires longer time to power up For shorter power up time 1 Press OPTIONS 2 Press then select Standby Mode in the menu 3 Select Normal Picture No picture e See TVs manual for correct video input channel selection Change the TV channel until you see the DVD screen e Press DISC MENU e If you have changed the TV type setting switch back to default mode 1 Press 4 to open the disc compartment 2 Press lt 3 Press SUBTITLE e If you have changed the progressive scan setting switch back to default mode 1 Press 4 to open the disc compartment 2 Press 3 Press SUBTITLE No picture on HDMI connection e Check if the HDMI cable is faulty Replace anew HDMI cable e If this happens when you change the HDMI video resolution press HDMI repeatedly until the picture appears EN 4 7 English Troubleshooting Sound Distorted sound or echo e Ensure that the TV volume is set to the minimum level if audio is output through the home theater No sound e Ensure that the audio cables are
7. 2m 32 47in Low lt 0 8m 32in Back Change Select 20 EN ownloaded From TheatreS ystem Manual com Manuals 8 Select the height of which the DVD Home Theatre unit SoundBar is placed then press PB gt Listening Position menu is displayed Listening Position Select the distance between your listening position and the SoundBar system Near gt 2m 78in E Default 2 3m 78 118in Far lt 3m 118in Back Change Select 9 Select the distance between the listening position and the speakers then press P 10 The speaker setting is complete press to exit This DVD Home Theatre unit is now ready for use EJ ae e To change the menu display language see chapter Adjusting settings General setup gt OSD Language for details e If you connect this unit to a HDMI CEC compliant TV using a HDMI cable it switches automatically to the menu display language as per your TV setting Turn on Progressive Scan If you connect this unit to TV with the component video connection see chapter Connect video cables Option 2 Connect to component video jack for details you can turn on the progressive scan output if your TV supports progressive scan 1 Tum on the TV to the correct viewing channel for this unit Press DISC MENU Press GE OPTIONS RW NY Press W to select LJ Video Setup in the menu then press Video Setup TV
8. DVD Home Theatre unit Caution e Risk of personal injury and damage to the unit 1 Ensure all the required cables are connected to this unit 2 Remove the screws and detach the DVD Home Theatre stand then close the rear cover 3 Attach the supplied knobs to the rear of this unit Downloaded From TheatreS ystem Manual com Manuals 4 Position the supplied bracket on the wall drill the screw holes and insert the rubber wall plugs not supplied into the holes Tips e To mount this DVD Home Theatre unit below your TV leave at least 10cm 4 inches of space between the TV and the bracket 5 Secure the bracket onto the wall with the screws not supplied 6 Hook the DVD Home Theatre unit firmly onto the mounted bracket Slide the knobs through the key holes and lock into position EN 17 English Connect 4 Get started Prepare the remote control 1 Push to open the battery compartment cover 2 Insert two batteries type RO3 or AAA Match the indications inside the battery compartment 3 Close the cover e Do not mix batteries old and new or carbon and alkaline etc e Remove batteries if they are exhausted or if the remote control is not to be used for a long time e Batteries contain chemical substances they should be disposed off properly 18 EN Downloaded From TheatreS ystem Manual com Manuals Control a play source 1
9. Type TV Display Picture Settings Advanced Picture Closed Caption 5 Select Progressive gt On then press OK A waming message is displayed 6 To proceed select OK in the menu and press OK The progressive setup is complete e Ifa blank distorted screen is displayed wait for 15 seconds for the auto recover e If no picture displayed turn off the progressive scan mode as follows 1 Press amp to open the disc compartment 2 Press P 3 Press SUBTITLE Downloaded From TheatreS ystem Manual com Manuals N To exit the menu press OPTIONS 8 You can now tum on the progressive scan mode on your TV see the TV user manual e There are some progressive scan TVs that are not fully compatible with this unit resulting in an unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode In such case turn off the progressive scan feature on this unit and your TV EN 21 English Get started Activate EasyLink control This feature is only applicable if this unit is connected to HDMI CEC compliant TV device It enables all the linked devices response or react to certain commands simultaneously with one touch control 1 Turn on the HDMI CEC operations on your TV and other connected devices See TVs devices manual for details 2 You can now enjoy the EasyLink controls One touch play Auto Wake up TV When you press PLAY button
10. enter the 4 digit password before it can be played e Screen saver displays automatically if the disc play is stopped for about 15 minutes To wake up from screen saver press DISC MENU e This unit automatically switches to standby mode if you do not press any buttons within 30 minutes after a disc has stopped playing 24 EN Downloaded From TheatreS ystem Manual com Manuals Play video Change video play Kiste 1 Play a title e For video disc playback always resumes from the point where it was last stopped To start playback from the beginning press ME while the message is displayed Control a title 1 Play a title 2 Use the remote control to control the title Button 2 Av Action Pause resume play Stop play Jump to the next title chapter Return to the beginning of the current title chapter or jump to the previous title chapter Search backward forward e To change search speed press this button repeatedly Slow motion reverse forward play e To change play speed press this button repeatedly e For VCD only forward play is possible Downloaded From TheatreSystem Manual com Manuals 2 Use the remote control to change the video play Button AUDIO SYNC SUBTITLE PROGRAM Action Change audio language e Only applicable to discs with multiple audio language or channel Change subtitle language e Only applicable to discs wi
11. system for providing 5 1 channels of discrete digital audio in consumer electronics products and software content It is not developed by Dolby Digital Downloaded From TheatreS ystem Manual com Manuals H HDCP High bandwidth Digital Content Protection This is a specification that provides a secure transmission of digital contents between different devices to prevent unauthorised copyright HDMI High Definition Multimedia Interface HDMI is a high speed digital interface that can transmit uncompressed high definition video and digital multichannel audio It delivers high quality picture and sound quality completely free from noise HDMI is fully backward compatible with DVI As required by the HDMI standard connecting to HDMI or DVI products without HDCP High bandwidth Digital Content Protection will result in no Video or Audio output J JPEG A very common digital still picture format A still picture data compression system proposed by the Joint Photographic Expert Group which features small decrease in image quality in spite of its high compression ratio Files are recognised by their file extension Jpg or jpeg EN 49 English Glossary M MP3 A file format with a sound data compression system MP3 is the abbreviation of Motion Picture Experts Group 1 or MPEG 1 Audio Layer 3 With the MP3 format one CD R or CD RW can contain about 10 times more data than a regular CD MPEG Mot
12. the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards CLASS 1 LASER PRODUCT EN 5 English Important 2 Your product Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome The all in one SoundBar DVD Home Theatre is designed to complement your home perfectly Enjoy the SoundBar DVD Home Theatre with state of the art Ambisound surround sound and picture quality without the clutter of multiple speakers Features highlight Video upscaling to 1080p You can now watch the DVDs in the highest picture quality available for your HDTV This DVD Home Theatre offers full high definition video playback up to 1080p resolution for an amazing viewing experience A highly detailed picture and increased sharpness delivers a more true to life picture EasyLink EasyLink uses the HDMI CEC Consumer Electronics Control industry standard protocol to share functionality with all HDMI CEC compliant devices over HDMI It enables the connected devices to control each other with a single remote control Note e Philips does not guarantee 100 interoperability with all HDMI CEC devices 6 EN Downloaded From TheatreS ystem Manual com Manuals Ambisound Philips Ambisound technology reproduces multi cha
13. this unit will wake up from standby mode and start disc play if a video disc is found in the disc compartment and it will also turn on your TV and switch to the correct viewing channel One touch power off System Standby When you press and hold 9 STANDBY button for at least three seconds it will turn off this unit and all the linked devices to standby This unit also responses to standby command from other HDMI CEC devices One touch audio input switching System Audio Control This unit is able to render the audio signals from the active source It switches automatically to the corresponding audio input and output the sound from its speaker system e Before you can enjoy this function you have to map the audio inputs to the connected devices e You can use any HDMI CEC TV device remote control to adjust the volume 22 EN Downloaded From TheatreS ystem Manual com Manuals Note e To enable one touch play function a video disc must be placed in the disc compartment before operation e Philips does not guarantee 100 interoperability with all HDMI CEC compliant devices Map the audio inputs to the connected devices Note e Before you start ensure that an audio connection has been made between this unit and your TV devices A Press DISC MENU Press EJ OPTIONS gt General Setup menu is displayed N 3 4 Select EasyLink then press Press gt
14. up to a maximum of 40 radio stations e lf auto installation is not activated or less than 5 radio stations are stored AUTO INSTALL will be displayed again the next time you turn on to radio mode EN 33 English Play Listen to radio 1 Press RADIO repeatedly to select FM or AM MW band 2 Use the remote control to control the radio Button Action Q Select a preset radio station 4a gt gt Tune the radio frequency backward forward Toggle between FM stereo AUDIO SYNC and FM mono mode Press and hold this button to delete the preset station from the preset list e The preset number for other radio stations remain unchanged Reinstall all the radio stations 1 Press RADIO repeatedly to select FM or AM MW band 2 Press and hold PROGRAM until STARTING INSTALL is displayed gt All previously stored radio stations will be replaced Note e lIfno stereo signal is detected or less than 5 stations are detected during radio installation CHECK ANTENNA is displayed 34 EN Downloaded From TheatreS ystem Manual com Manuals Search and store radio stations individually 1 Press RADIO repeatedly to select FM or AM MW band 2 Press lt lt DP gt The radio frequency indication starts to change until a radio station is detected 3 Repeat step 2 until you tune to the radio station you wish to store e To finetune the r
15. 100 normal brightness e 70 medium brightness e 40 dimmest display OSD Language Select the default on screen menu language Screen Saver Turn off or on the screen saver mode It helps to protect the TV screen from being damage due to over exposure to a static image for too long e On set the screen saver to appear after 15 minutes of inactivity for example in pause or stop mode e Off disable screen saver mode Sleep Timer Switch to standby automatically after the preset time e Off disable sleep mode 15 30 45 60 mins select the count down time before it switches to standby Standby Mode Set the standby mode e Normal normal standby power consumption Requires shorter time to power up e Low Power low standby power consumption However It requires longer time to power up DivX R VOD Code Display the DivX registration code Tips Enter this unit s DivX registration code when you rent or purchase video from www divx com vod The DivX videos rented or purchased through the DivX VOD Video On Demand service can be played only on the device to which it is registered Ambisound Setup English Adjust settings Audio setup Change the Ambisound setup 1 Options Descriptions ie E OPTIONS Setup Select this if you want to General Setup menu is displayed Guide go throug
16. 22 mm e Weight 12 7 kg Main unit Dimensions WxHxD 1028 x 167 x 155 mm e Weight 8 9 kg e Centre speaker e Speaker impedance 4 ohm e Speaker drivers 2 x 2 5 woofer 2 x 1 Soft dome tweeter e Frequency response 200 Hz 20 kHz e Left Right surround speakers e Speaker impedance 6 ohm e Speaker drivers 4 x 2 5 full range woofer e Frequency response 200 Hz 20 kHz Wall Mount Bracket Dimensions WxHxD 681 7 x 99 x 35 mm e Weight 1 5 kg Laser specification e Type Semiconductor laser GaAlAs CD Wave length 645 660 nm DVD 770 800 nm CD e Output power 6 mW DVD 7 mW VCD CD e Beam divergence 60 degrees 10 Troubleshooting Warning e Risk of electric shock Never remove the casing of the Home Theater System To keep the warranty valid never try to repair the system yourself If you encounter problems when using the Home Theater System check the following points before requesting service If the problem remains unsolved register your Home Theater System and get support at www philips com welcome If you contact Philips you will be asked for the model and serial number of your Home Theater System The model number and serial number are on the back or bottom of your Home Theater System Write the numbers here Model No Serial No Main unit The buttons on this Home Theater System do not work
17. Register your product and get support at www philips com welcome HTS8141 EN User manual ZH CN FAP at ZH TW AFM MS MY Manual pengguna PHILIPS Downloaded From TheatreSystem Manual com Manuals Contents 1 Important Safety and important notice Trademark notice 2 Your product Features highlight Product overview 3 Connect Place the unit Connect video cables Connect subwoofer Connect radio antenna Connect audio cables other devices Mount the DVD Home Theatre unit 4 Get started Prepare the remote control Find the correct viewing channel Start Ambisound setup Turn on Progressive Scan Activate EasyLink control Select a play source 5 Play ay from disc ay video ay music ay photo ay from USB device ay from portable media player ay from iPod uU U U U UUU U ay from radio Downloaded From TheatreSystem Manual com Manuals 10 10 11 13 14 14 17 18 18 19 19 21 22 23 24 24 25 28 29 30 31 31 33 Adjust sound Control the volume Adjust Bass Treble Select Ambisound Select a preset sound effect Adjust settings General setup Audio setup Video setup Preference Setup Additional information Update software Care Specifications 10 Troubleshooting 11 Glossary EN 35 35 35 35 36 37 37 39 40 45 45 45 45 46 47 49 English Contents 1 Important Safety and important notice yN Warning e
18. Risk of overheating Never install the Home Theater System in a confined space Always leave a space of at least 4 inches around the Home Theater System for ventilation Ensure curtains or other objects never cover the ventilation slots on the Home Theater System e Never place the Home Theater System remote control or batteries near naked flames or other heat sources including direct sunlight e Only use this Home Theater System indoors Keep this Home Theater System away from water moisture and liquid filled objects e Never place this Home Theater System on other electrical equipment Keep away from this Home Theater System during lightning storms e Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable e Visible and invisible laser radiation when open Avoid exposure to beam Recycle notice BO This electronic equipment contains a large number of materials that can be recycled or reused if disassembled by a specialised company If you are disposing of an old machine please take it to a recycling centre Please observe the local regulations regarding disposal of packaging materials exhausted batteries and old equipment 4 EN Downloaded From TheatreS ystem Manual com Manuals Copyright notice Be responsible Respect copyrights The making of unauthorised copies of copy protected material including computer prog
19. Zoom in out e Play will pause while in zoom mode Stop play EN 29 English Play Play musical slideshow Play MP3 WMA music files and JPEG photo files simultaneously to create musical slideshow The MP3 WMA and JPEG files must be stored on the same disc or USB device 1 Play MP3 WMA music 2 Navigate to the photo folder album and press Pll to start slideshow play Slideshow begins and continues till the end of the photo folder or album Audio continues to play till the end of the disc e To return to the menu press gt BACK W To stop slideshow play press Hl 4 To stop music play press ll again 30 EN Downloaded From TheatreS ystem Manual com Manuals Play from USB device This unit can only play view MP3 WMA WMV DivX Ultra or JPEG files that are stored on such devices 1 Connect a USB flash drive or USB memory card reader to the gt e USB socket on this unit 2 Press USB A contents menu is displayed 3 Selecta file to play then press PAI For more information see chapters Play music Play photo Play video for details 4 To stop play press Il or remove the USB device ae e Ifthe device does not fit into the USB socket connect it through a USB extension cable e Ifamultiple USB card reader is used only one of the connected USB drive contents can be accessed e Ifa USB HDD is used ensure that an auxiliary powe
20. adio frequency press AV 4 Press PROGRAM e If no action is carried out within 20 seconds after the above step it exits the preset mode 5 Press I Pl or the number buttons to select a preset number to store 6 Press PROGRAM to confirm Change tuning grid In some countries the frequency step between adjacent channels in FM band is 50 kHz or 100 kHz AM MW band is 9 KHz or 10 kHz Note e This feature only applicable for certain region e Change tuning grid erases all preset radio stations Press RADIO repeatedly to select FM or AM MW band Press W Press and hold Bll until GRID 9 or GRID 10 is displayed e GRID 9 for FM 50 kHz or AM 9 kHz and GRID 10 for FM 100 kHz or AM 10 kHz UW N 6 Adjust sound Control the volume 1 Press VOL to increase or decrease the volume level e To mute the volume press 8K To restore the volume press K again or press the volume button Adjust Bass Treble ae f Te J R l BASS PHILIPS HOME THEATER SYSTEM Press BASS TREBLE 2 Press VOL repeatedly to set the level for low BASS or high TREBLE tone Note e fthe volume control is not used within 10 seconds it resumes normal volume control function Downloaded From TheatreS ystem Manual com Manuals Select A
21. ailable 5 During playback you can use the remote in Extended Control control to control the music play mode EJ ae e While in iPod mode the battery of your iPod will be charged e In extended play mode control of iPod play is only possible through the contents displayed on your TV using this DVD Home Theatre s remote control 32 EN Downloaded From TheatreS ystem Manual com Manuals Play from radio Check if the FM antenna has been connected to the subwoofer If not connect the supplied FM antenna to the FM 75Q socket and fix its ends to the wall Note e For China Latin America region only if you want to receive AM MW radio band connect the AM loop antenna supplied to the AM MW sockets on this DVD Home Theatre unit ae e For better FM stereo reception connect an external FM antenna not supplied e Position the antenna as far away as possible from your TV VCR or other radiation source to prevent unwanted interference Downloaded From TheatreS ystem Manual com Manuals First time tuning The first time when you access RADIO mode follow the instructions to install the radio stations 1 Press RADIO gt AUTO INSTALL PRESS PLAY is displayed 2 Press Pll D All detected radio stations are stored Once complete it tunes to the first preset radio station e To stop auto tuning press W e This unit can store
22. complete the Ambisound setup in order to obtain the best possible surround sound effect Note e Before you start ensure that you have made all the required connections e Complete the Ambisound setup for this unit before you insert a disc to play 1 Press DISC MENU to switch to disc mode Turn on the TV and switch it to the correct video in channel Language menu is displayed OSD Language Please choose your language English Pycckxun Le 3 Select a anguage for on screen display then press P A welcome message is displayed To skip the Ambisound setup press il to exit 4 Press to continue A message on the unit orientation is displayed EN 19 English Get started 5 Press to continue gt Room Acoustics menu is displayed Room Acoustics Please select the type of walls that surround your room Hard Concrete wood Soft Curtains open space 6 Select the condition of the room then press PB gt Room Placement menu is displayed Room Placement Select the Sound Bar system placement position in your room Middle of room Corner of room Near the right wall Near the left wall Back Change Select 7 Select the DVD Home Theatre unit SoundBar placement in the room then press PB gt Height menu is displayed Height Select the height at which your SoundBar system is placed High gt 1 2m 47in Default 0 8 1
23. connected and press the correct input source for example AUDIO SOURCE USB to select the device you want to play No sound on HDMI connection e Sound cannot transmit through HDMI connection if the connected device is non HDCP compliant or only DVI compatible Make an analog or digital audio connection e Ensure that the HDMI Audio setting is turned on No sound from TV program e Connect an audio cable from the AUDIO input on this Home Theater System to the AUDIO output on your TV Then press AUDIO SOURCE repeatedly to select the corresponding audio input source Play Audio is not synchronised with the video playback e To make adjustment 1 Press and hold AUDIO SYNC until AUDIO SYNC XXX is displayed 2 Within five seconds press VOL 48 EN Downloaded From TheatreS ystem Manual com Manuals DivX video files cannot be played e Ensure that the DivX file is encoded according to the Home Theater Profile with the DivX encoder e Ensure that the DivX video file is complete EasyLink feature does not work e Ensure that the home theater is connected to an HDMI CEC compliant TV with a HDMI CEC cable The aspect ratio of the screen is not aligned with the TV display setting e The aspect ratio is fixed on the disc DivX subtitle does not display correctly e Ensure that the subtitle file name is the same as the movie file name e Select the correct character se
24. ct iPod docking station Mount the DVD Home Theatre unit Refer to the type plate at the rear or bottom of the product for identification and supply ratings Before you make or change any connections ensure that all the devices are disconnected from the power outlet Tip Different types of connectors may be used to connect this product to your TV depending on availability and your needs A comprehensive interactive guide to help you connect your product is available at www connectivityguide philips com 10 EN Downloaded From TheatreS ystem Manual com Manuals on the wall see chapter Mount the DVD Home Theatre unit Never place this unit in an enclosed cabinet Install this unit near the AC outlet where the AC power plug can be easily reached Place this DVD Home Theatre unit near to the TV e Place it at a height that is closest to the listening ear level Position this DVD Home Theatre so that it is directly parallel to the listening area Ji cea 3 Place the subwoofer at the corner of the room or at least one metre away from the TV Note You may purchase a separate table top stand that can support both your Philips Plasma LCD TV and this DVD Home Theatre unit from the nearest Philips retailers Connect video cables This section describes how to connect this DVD Home Theatre unit to your TV so to enable viewing of disc play Select the best video c
25. e Navigate through the on screen menu e Press left or right for fast backward or forward search e RADIO press up or down to tune the radio frequency e RADIO press left or right to start auto search BACK e Return to the previous display menu Downloaded From TheatreS ystem Manual com Manuals 5 I4 Pl Previous Next e Skip to the previous or next title chapter track e RADIO select a preset radio station K Mute e Mute or restore the volume VOL e Adjust the volume level AMBISOUND e Select different surround sound output auto multi channel or stereo Numeric buttons e Enter a preset number or item to play SUBTITLE Select DVD or DivX subtitle language HDMI ANGLE e Select a video resolution setting for HDMI output e Press and hold to select a different viewing angle of a DVD movie Q2 ZOOM e Zoom in or out the picture on the TV EN 9 English Your product 3 Connect This section describes the basic connections Place the unit e Place this unit on top of a table or mount it required for this DVD Home Theatre unit before it can be used Basic connections Place the unit Connect video cables Connect subwoofer Connect radio antenna Optional connections Connect audio cables other devices e Connect audio from TV e Connect audio from cable box recorder game console e Connect portable media player e Connect USB device e Conne
26. e various setting options of this unit Symbol Options vii General Setup A Audio Setup L Video Setup mg Preference Setup Note e Underlined options are the factory default settings General setup Press OPTIONS General Setup menu is displayed 2 Press gt 3 Select an option then press OK General Setup EasyLink Disc Lock Display Dim OSD Language Screen Saver Sleep Timer Standby Mode DivX R VOD Code e See the explanations of the above options in the following pages 4 Selecta setting then press OK e To return to the previous menu press gt BACK To exit the menu press EJ OPTIONS Downloaded From TheatreS ystem Manual com Manuals EasyLink Setup This feature is only applicable if this unit is connected to HDMI CEC compliant TV device It enables all the linked devices response or react to certain commands simultaneously with one touch control Options Descriptions Auto Wake It wake ups your TV up TV automatically when you press PLAY to power up this unit and start disc play if a video disc is found in the disc compartment e To disable this feature select Off System Respond to standby Standby command from other HDMI CEC compliant TV devices e To disable this feature select Decline System Audio It enables this DVD Control Home Theatre unit to switch automatically to the audio i
27. ect e The video input socket on your TV may be labelled cable to the LOUDSPEAKERS socket on as A V IN VIDEO IN COMPOSITE or BASEBAND ieu e This type of connections provide standard picture quality 3 Connect the grey end of the interconnect cable to the TO SUBWOOFER socket on this unit EN 13 Downloaded From TheatreS ystem Manual com Manuals English Connect Connect audio cables other devices Connect radio antenna This section describes how you can route the sound from other devices to this DVD Home Theatre unit in order to enjoy sound output or audio play with multi channel surround capabilities Connect audio from TV also used for EasyLink control 1 Stand the AM MW loop antenna supplied upright to fix its claw into the slot 2 Connect the AM MW loop antenna to the AM MW socket Then place the AM MVW loop antenna on a shelf or attach it to a stand or wall TV AUDIO IN AUX1 3 Connect the FM antenna supplied to the FM75Q socket on this unit for some models this cable has been connected Extend the FM antenna and fix its ends to the wall AUDIO OUT required connections are complete and you are ready to enjoy this DVD Home Theatre unit 4 Connect the power cord when all the 1 Connect an audio cable not supplied from the TV AUDIO IN AUX1 sockets on this unit to the AUDIO OUT sockets on y
28. es not appear correctly By default this T Pres E OPTIONS setting matches the most common setting for TVs in your country e PAL for PAL system TV Video setup General Setup menu is displayed 2 Press W to select LJ Video Setup then NTSC for NTSC system TV presat e Multi for TV that is compatible 3 Select an option then press OK with both PAL and NTSC TV Display Select the screen format according to how you want the picture to appear on your va TV Type TV Display K Picture Settings Advanced Picture Closed Caption Progressive 4 3 Pan Scan PS 4 3 Letter Box LB 16 9 Wide Screen e 4 3 Pan Scan for standard TV a e See the explanations of the above full height screen display with the sides options in the following pages trimmed A Gs setting then press OK e 4 3 Letter Box for standard TV a To return to the previous menu press wide screen display with black bars on the top and bottom BAGS e 16 9 Wide Screen for wide screen To exit the menu press EJ OPTIONS TV frame ratio 16 9 Picture Settings Select a predefined set of picture colour settings or customise your personal setting e Standard original colour setting e Bright vibrant colour setting e Soft warm colour setting e Personal customise the colour setting Set the level of brightness contrast tint and co
29. gain to reboot the Press OPTIONS system g Preference Setup mi Disc Menu Care Parental K PBC MP3 JPEG Nav IE Caution LA Password e Never use solvents such as benzene thinner DivX Subtitle i i cleaners available commercially or anti static sprays g8 Version Info intended for discs Default 2 Select Preference Setup gt Version Clean discs Info then press OK Wipe the disc with a micro fibre cleaning cloth T e dawn hevro see den from the centre to the edge in a straight line movement press EJ OPTIONS to exit the menu 4 Goto www philips com support to check Clean main unit screen the latest software version available for this Wipe the screen surface with a micro fibre unit cleaning cloth 5 Ifthe latest software version is higher than the software version of this unit download it and store onto a CD R or USB flash drive EN 45 Downloaded From TheatreS ystem Manual com Manuals English Additional information 9 Specifications Note e Specification and design are subject to change without notice Playback media e DVD Video DVD R RW DVD R RW DVD R DL CD R CD RW Audio CD Video CD SVCD Picture CD MP3 CD WMA CD Divx CD USB flash drive Amplifier e Total output power Home Theatre 500VV e Frequency response 20 Hz 20 kHz 3dB Signal to noise ratio gt 65 dB CCIR e I
30. h the complete 2 Press W to select Q Audio Setup then Ambisound settings press P Room Select the type of walls 3 Select an option then press OK Acoustics that surround your room Room Select this unit placement Ambisound Setup Height Select the height at which Vo HDMI Audio this unit is placed Night Mode oe m a oto ucu ssacaq nd Listening Select the distance Position between your listening position and this unit oo Tips e See chapter Get Started Start Ambisound setup 4 Select a setting then press OK for detailed information e To return to the previous menu press SD BACK HDMI Audio To exit the menu press EJ OPTIONS When you connect this unit and TV with HDMI cable select the audio output setting for this connection e Qn the sound is output through both your TV and this speaker system If the audio format on the disc is not supported it will be downmixed to two channel sound linear PCM e Off disable audio output from your TV The sound ts only output through this speaker system Night Mode Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume without disturbing others e On for quiet viewing at night DVDs only e Off enjoy surround sound with a full dynamic range EN 39 Downloaded From TheatreS ystem Manual com Manuals TV Type Change this setting only if the video do
31. he slideshow begins automatically gt For a JPEG disc the photo menu is displayed 3 Select the folder album you want to play e To preview the photos in the folder album press G INFO gt i lt Pi e Togo to previous or next screen display press 4 Pl e To select a photo press the cursor buttons e To display the selected photo only press OK 4 Press I to start slideshow play e To return to the menu press gt BACK Downloaded From TheatreS ystem Manual com Manuals It may require longer time to display the disc contents on the TV due to the large number of songs photos compiled onto one disc If the JPEG photo is not recorded with an exif type file the actual thumbnail picture will not be shown on the display It will be replaced with a blue mountain thumbnail picture This unit can only display digital camera pictures according to the JPEG EXIF format typically used by almost all digital cameras It cannot display Motion JPEG and pictures in formats other than JPEG or sound clips associated with pictures Folders files exceed the supported file limit of this unit will not be displayed or played Control photo play 1 2 Play photo slideshow Use the remote control to control the photo Button Action lt lt q Ply Skip to the previous photo Skip to the next photo Rotate the photo clockwise Rotate the photo anti clockwise TEN
32. i channel or stereo 4 Pll Play Pause e Start or pause disc play e RADIO start auto radio installation only available for first time setup Volume control e Adjust the volume level E Stop e Stop disc play e RADIO erase the current preset radio station SOURCE e Select a play media DISC USB DOCK RADIO FM OPTICAL INPUT DIGITAL INPUT AUX SCART AUX1 INPUT AUX2 INPUT AUX3 INPUT or MP3 LINK amp Open Close e Open or close the disc compartment 9 Disc compartment The following connectors are located at the left side panel MP3 LINK socket e To connect portable audio player AD gt USB socket e To connect USB flash drive USB memory reader or digital camera EN 7 English Your product oo Remote control OO a e Turn on this unit or turn off to standby mode e Press and hold to turn off this unit and all the HDMI CEC compliant TV devices for EasyLink control only 2 OPEN CLOSE amp e Open or close the disc compartment OPEN CLOSE i i vse Rano gouace iPoa Dock i i QG Source buttons e DISC MENU switch to DISC mode While in disc mode access or exit disc menu e USB switch to USB mode e RADIO switch to FM band ad e AUDIO SOURCE Select an audio input source OPTIONS e jPod DOCK switch to the iPod in the dock ATTE INFO e Display the current status or disc Q informatio
33. ion Picture Experts Group A collection of compression systems for digital audio and video P PBC Playback Control A system where you navigate through a Video CD Super VCD with on screen menus that are recorded onto the disc You can enjoy interactive playback and search PCM Pulse Code Modulation A digital audio encoding system Progressive scan The progressive scan displays twice the number of frames per second than in an ordinary TV system It offers higher picture resolution and quality 50 EN Downloaded From TheatreS ystem Manual com Manuals W WMA Windows Media Audio Refers to an audio compression technology developed by Microsoft Corporation WMA data can be encoded with Windows Media player version 9 or Windows Media player for Windows XP Files are recognised by their file extension wma WMV Windows Media Video Refers to a video compression technology developed by Microsoft Corporation WMV content can be encoded by using Windows Media Encoder 9 series Files are recognised by their file extension wmv
34. lour saturation in the menu then press OK 40 EN Downloaded From TheatreS ystem Manual com Manuals Advanced Picture e Wide Screen Format define the This is an advanced setting to optimise the wide screen format for disc play video output This option is only applicable Options Descriptions for video connection through HDMI or Component Video with Progressive Scan output Superwide Centre position of the screen is stretched less than the side This setting is only applicable e DCDi Turn on or off Directional es if the video resolution is Correlation Deinterlacing feature It fills the missing lines to optimise video set to 720p or 1080i p content It is especially effective during 4 3 Pillar No stretching of the slow motion play Box picture Black bars are displayed on both sides Note of the screen e DCDi setting is only available for progressive scan Of Picture will be displayed _ output according to the format of the disc Gamma Adjust the colour of an image element pixel to produce a Note English Adjust settings perfect and clear picture e This setting is only available if you have set the TV e Chroma Delay Adjust the advance Display setting to 16 9 Wide Screen delay of chroma signals to produce a perfect and clear picture e HDMI Video select a video e True Life Increase the contrast resolution that is compa
35. mbisound G i AMBISOUND ETS O ae CTT TI Press AMBISOUND repeatedly to select a best Ambisound output that most suits the video or music you play Options Descriptions AUTO The surround output will be selected based on the audio stream of the played content MULTI Multi channel surround sound CHANNEL STEREO Stereo sound EN 35 English Adjust sound Select a preset sound effect 1 amasouno PHILIPS T SOUND MODE Press SOUND MODE repeatedly to select a sound effect that most suits the video or music you play Video Descriptions Music ACTION Enhanced low and high ROCK range for great sounding movie effects and atmosphere Great for action movies and rock pop music DRAMA Clear mid and high range JAZZ Recreates the atmosphere of a live club with the artist just in front of you Good for Jazz music and watching dramas CONCERT Flat and pure sound mode CLASSIC Ideal for listening to classical music and watching live concert DVDs GAMING Slightly enhanced low range PARTY and strong mid range ideal for party music and video gaming SPORTS Moderate mid range and surround effects for clear vocals and the atmosphere of a live sports venue NEWS Enhanced mid range for clear vocals speech 36 EN Downloaded From TheatreS ystem Manual com Manuals 7 Adjust settings This section describes th
36. n mesom faen e Display photo files in 12 thumbnails ai view OPTIONS OO amp Q r a e Access or exit Options menu this menu provides various setting options Pll Play Pause d e Start or pause disc play E O Aane e RADIO start auto radio installation ANGLE PROGRAM Qi HDMI ZOOM REPEAT STUND 3 I I D E Stop e Stop disc play PHILIPS e RADIO erase the current preset radio HOME THEATER SYSTEM station YS S only available for first time setup 8 EN Downloaded From TheatreSystem Manual com Manuals TREBLE BASS e Switch to treble or bass mode Then press VOL to set its level setting 9 AUDIO SYNC e Select an audio language channel e Press and hold to access audio sync setting Then press VOL to set the audio delay time e RADIO toggle between FM stereo and mono mode SOUND MODE e Select a predefined sound effect Q REPEAT PROGRAM e Select various repeat or shuffle modes turns off repeat or shuffle mode e RADIO press this button to start manual radio preset e RADIO press and hold this button to start automatic radio preset OK e Confirm an entry or selection 3 Cursor buttons AV lt 1 gt
37. nection is needed to complete this connection e To route the audio from your TV to this DVD Home Theatre unit connect an audio cable from the audio input on this unit to the audio output on your TV e This type of connections provide best picture quality 12 EN Downloaded From TheatreSystem Manual com Manuals Option 2 Connect to component video socket COMPONENT VIDEO OUT PriCr Pb Cb 1 Connect the component video cables not supplied from the Y Ps Pr sockets on this unit to the component video input sockets on your TV e Ifa progressive scan TV is used you may turn on the progressive scan mode see chapter Turn on Progressive Scan for details Tips e The component video input socket on your TV may be labelled as Y Pb Cb Pr Cr or YUV e This type of connections provide good picture quality Option 3 Connect to Video CVBS Connect subwoofer socket VIDEO OUT i i 2 1 LOUDSPEAKERS _ VIDEO IN ey 3 1 Connect a composite video cable is supplied from the VIDEO OUT socket on this unit to the video input socket on ee 1 Unwind the subwoofer s interconnect cable at TO MAIN UNIT Tips 2 Connect the white end of the interconn
38. nnel surround sound with fewer speakers to give an embracing surround experience without the hassle of setting up a full range of speaker systems USB direct and MP3 link Simply plug your USB device into the USB socket to play your MP3 WMA JPEG DivX files or plug your portable media player to the MP3 LINK socket to enjoy the music play in superb sound quality Sync the audio output with the video play This DVD Home Theatre provides you the feature of delaying the audio output if the video signals that go directly to the TV is slower than the audio streams Region codes DVD movies are usually not released at the same time in all regions of the world thus all DVD players are programmed to a specific region code DVD region code Countries Asia Pacific Taiwan Korea Australia New Zealand Product overview Main unit Note e Control buttons on this DVD Home Theatre unit SoundBar are operated through touch screen display The control displays will be dimly lit after one seconds of inactivity Tips e To change the brightness of the touch screen display see chapter Adjust settings General Setup gt Display Dim Downloaded From TheatreS ystem Manual com Manuals e Turn on this unit or turn off to standby mode e Press and hold to turn on this unit from a low power standby mode Display panel AMBISOUND e Select different surround sound output auto mult
39. nput of the active device e To enable this feature select On Then proceed to Audio Input Mapping to scan and map all the connected devices EN 37 English Adjust settings Audio Input Mapping Map the audio input to the connected TV devices correctly to enable automatic switching of input source 1 Press OK to start scanning of devices 2 Select the audio input to map e g AUX1 Input AUX2 Input then press P 3 Select the correct device that connected to this audio input then press OK Your TV and other connected devices must be compliant with HDMI CEC You must turn on the HDMI CEC operations on your TV devices before you can enjoy the EasyLink controls See your TVs devices manual for details Philips does not guarantee 100 interoperability with all HDMI CEC compliant devices Disc Lock Set play restriction for a specific discs Before you start place the disc in the disc compartment maximum 40 discs can be locked e Lock restrict access to the current disc The next time you want to play this disc or unlock it you need to enter the password e Unlock all discs can be played Tips e To set or change your password go to Preference Setup gt Password 38 EN Downloaded From TheatreS ystem Manual com Manuals Display Dim Change the brightness level of the display panel to suit the lighting in your room e
40. nput sensitivity e AUX 1 500 mV e MP3 LINK 250 mV Disc e Laser Type Semiconductor e Disc diameter 12cm 8cm e Video decording MPEG1 MPEG2 Divx DivX Ultra WMV9 e Video DAC 12 bits 148 MHz e Signal system PAL NTSC e Video S N 56 dB e Audio DAC 24 bits 192 kHz e Frequency response 4 Hz 20 kHz 44 1 kHz 4 Hz 22 kHz 48 kHz 4 Hz 44 kHz 96 kHz e POMP IEC 60958 e Dolby Digital DTS IEC60958 IEC61937 Radio e Tuning range FM 87 5 108 MHz 50 100 kHz AM MW 531 1602 kHz 9 kHz AM MW 530 1700 kHz 10 kHz e 26 dB quieting sensitivity FM 20 dBf AM 4uV m e F rejection ratio FM 60 dB AM 45 dB Signal to noise ratio FM 60 dB AM 40 dB e Harmonic distortion FM 3 AM 5 e Frequency response FM 180 Hz 10 kHz 6dB e Stereo separation FM 26 dB 1 kHz e Stereo Threshold FM 23 5 dB 46 EN Downloaded From TheatreS ystem Manual com Manuals USB e Compatibility Hi Speed USB 2 0 e Class support UMS USB Mass Storage Class iPod docking station Dimensions WxHxD 34 5 x 104 mm e Weight 163 5 g Power Subwoofer e Power supply 110 127V 220 240V 50 60 Hz e Power consumption 120 W Standby power consumption Normal lt 3 5 W e Low standby lt 0 3 W System Bass Reflex System Impedance 4 ohm e Speaker drivers 165 mm 6 1 2 woofer e Frequency response 35 Hz 200 Hz Dimensions WxHxD 322 x 425 x 3
41. o FM band e Press AUDIO SOURCE to select an audio input source e Press iPod DOCK switch to the iPod mode Display Device connected to AUX1 INPUT TV AUDIO IN sockets AUX2 INPUT AUDIO IN AUX2 sockets AUX3 INPUT AUDIO IN AUX3 sockets OPTICAL INPUT OPTICAL IN socket DIGITAL INPUT COAXIAL DIGITAL IN socket MP3 LINK MP3 LINK socket EN 23 Downloaded From TheatreS ystem Manual com Manuals English Get started 5 Play Play a disc Caution Never place any objects other than discs into the disc compartment Play from disc Never touch the disc optical lens inside the disc compartment Note 1 Press amp to open the disc compartment DVDs and DVD players are designed with regional Insert a disc with its label facing up restrictions Ensure that the DVD video you play is 7 for the same region zone as your player indicated For double sided disc load the side to on its rear play faces up e This unit can support playback of the following file a formats MP3 WMA PEG DivX WMV 9 3 Press amp to close the disc compartment e About WMV 9 this unit only supports Main Profile and start disc play low level and Simple Profile Advanced Profile and To view disc play turn on the TV to DRM protected video files are not supported the correct viewing channel for this DVD Home Theatre unit 4 To stop disc play press W EJ r e Ifthe password entry menu is displayed you have to
42. onnection that your TV can support e Option 1 Connect to HDMI socket for a HDMI DVI or HDCP compliant TV e Option 2 Connect to component video socket for a standard TV or Progressive Scan TV e Option 3 Connect to Video CVBS socket for a standard TV Note e You must connect this unit directly to a TV Downloaded From TheatreS ystem Manual com Manuals Before you connect 1 Pull up the catch to remove the rear cover 2 Connect the cables to the corresponding sockets and direct the cables to the CABLE OUT point oe fe 3 Once complete close the rear cover Note e All the cables must be placed properly inside the rear panel in order for the rear cover to close EN 11 English Connect Option 1 Connect to HDMI socket 1 Connect a HDMI cable supplied from the HDMI OUT on this unit to the HDMI IN socket on your TV Note e The HDMI connector is only compatible with HDMI compliant TVs and DVI TVs ae e To optimise the video output see chapter Adjust settings gt Video Setup gt Advanced Picture for details e This unit is HDMI CEC compatible It enables connected TV device to control each other over HDMI see chapter Activate EasyLink control for details e Use a HDMI DVI adaptor in case your TV has only a DVI connection An extra audio con
43. our TV Note Note e Before connect to power outlet ensure that the voltage selector at the rear of this unit is set to the local power line voltage e To listen to the audio output from this connection press AUDIO SOURCE repeatedly until AUX1 INPUT is displayed on the display panel 14 EN Downloaded From TheatreS ystem Manual com Manuals Connect audio from cable box recorder game console You can choose to connect to analogue or digital socket depending on the device capabilities Connect to analogue sockets AUDIO IN 1 Connect an audio cable not supplied from the AUDIO IN AUX2 or AUX3 sockets on the subwoofer to the AUDIO OUT sockets on the device Note e To listen to the audio output from this connection press AUDIO SOURCE repeatedly until AUX2 INPUT or AUX3 INPUT is displayed on the display panel Downloaded From TheatreS ystem Manual com Manuals Connect to digital optical socket COAXIAL DIGITAL IN COAXIAL DIGITAL OUT 1 Connect a coaxial cable not supplied from the DIGITAL IN COAXIAL socket on the subwoofer to the COAXIAL DIGITAL OUT socket on the device Note e To listen to the audio output from this connection press AUDIO SOURCE repeatedly until DIGITAL INPUT is displayed on the display panel or 1 Connect an optical cable not supplied from the OPTICAL IN socket on the sub
44. ported iPod range Prepare the docking station If your iPod cannot be fit into the docking station adjust the support as below adjustable support knob 1 Turn the knob at the bottom of the docking station anti clockwise to loosen the adjustable support 2 Adjust the support until it can fit your iPod 3 Tum the knob clockwise to tighten it EN 31 English Play Control iPod music Button Action Change the volume level Select a predefined sound ait effect NN Select an Ambisound effect G Go to the previous next track lt lt gt gt Search backward forward Cn Pause resume play 1 Connect the docking station to the DOCK socket on this unit Res Switch to Extended Control 2 Dock your iPod to the docking station and mode to enable control of turn it on your iPod play through the contents displayed on TV 3 Press IPod DOCK Control buttons on iPod e It may require longer time to have no function in this authenticate the compatibility of certain mode iPod range e Press this button again to return to simple play 4 Start play on your iPod mode E view es ea ane ao ee Tessie huha video cable from t ocking statan to repeat shuffle play made or your TV and tum on TV ON setting in fim oF reseab mode yon tree e This option is only av
45. r cord connected to the USB HDD for proper operations e Digital cameras that use PTP protocol or require additional programme installation when connected to a PC are not supported Play from portable media player Simply connect your portable media player e g MP3 player to this unit to enjoy superb sound quality from your music collections 1 Connect a 3 5mm stereo audio cable supplied from the MP3 LINK socket on this unit to the headphone socket on your portable media player 2 Press AUDIO SOURCE repeatedly until MP3 LINK is displayed 3 Start play on your portable media player e See chapter Adjust Sound to enhance the audio output 4 Tosto lay press STOP button on your PP portable media player Note Control playback is only possible on your portable media player Stop play on the portable media player before you switch to other play media source Downloaded From TheatreS ystem Manual com Manuals Play from iPod Simply connect your iPod to the Philips universal docking station to enjoy your iPod play through this DVD Home Theatre unit List of supported iPod range iPod mini iPod nano 1st gen iPod classic iPod nano 2nd gen iPod mini 2nd gen iPod nano 3rd gen iPod with colour display iPod 5th gen iPod 6th gen classic iPod nano 4th gen iPod Touch 1st gen iPod Touch 2nd gen Note e Refer to Philips website for latest updates on sup
46. rams files broadcasts and sound record ings may be an infringement of copyrights and constitute a criminal offence This equipment should not be used for such purposes Macrovision copyright This product incorporates copyright protec tion technology that is protected by method claims of certain U S patents and other intel lectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorised by Macrovision Corporation and Is intended for home and other limited view ing uses only unless otherwise authorised by Macrovision Corporation Reverse engineering or disassembly is prohibited About Progressive Scan Consumers should note that not all high defi nition television sets are fully compatible with this product and may cause artefacts to be displayed on the picture In case of 525 or 625 progressive scan picture problems it is recom mended that the user switch the connection to the standard definition output If there are questions regarding our TV set compatibility with this model 525p and 625p DVD player please contact our customer service centre Trademark notice Xl DOLBY DIGITAL PRO LOGIC II Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories sg ox ULTRA Divx DivX Ultra Certified and associated logos are trademarks of Divx Inc and are u
47. s the DivX subtitle Standard English Chinese Simplified Chinese Korean Korean Note e Ensure that the subtitle file has the exact same file name as the movie file If for example the filename of the movie is Movie avi then you will need to name the text file Movie sub or Movie srt Version Info Display the software version of this unit Tips e This information is required when you want to find out if a newest software version is available at the Philips website that you may download and install on this unit Default Reset all the settings of this unit to factory default except for Disc Lock Password and Parental settings remain unchanged 8 Ad d iti onal 6 Insert the CD R or USB flash drive to this unit info rmation 7 Press DISC MENU or USB then follow the instruction on the TV to confirm update operation Note Do not remove the CD R or USB when software Update software updating is in progress Pe Philips provides software updates to ensure that this unit is compatible with the newest formats 00 Once software update is complete this unit turns off to standby automatically To check the updates compare the current software version of this unit with the latest l i a Note software version available at the Philips website We recommend that you disconnect the power cord 1 for a few seconds and connect a
48. sed under license Official DivX Ultra Certified product Plays all versions of DivX video including DivX 6 with enhanced playback of Divx media files and the DivX Media Format Plays DivX video with menus subtitles and audio tracks S dts Digital Surround Manufactured under license under U S Patent H s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS Inc 1996 2008 DTS Inc All Rights Reserved Plays My Windows A m Media Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries Downloaded From TheatreSystem Manual com Manuals HDMI and HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC A one USB The USB IF Logos are trademarks of Universal Serial Bus Implementers Forum inc D NERGY STAR ENERGY STAR and the ENERGY STAR mark are registered U S marks byFAROUDJA DCD is a trademark of Faroudja a division of Genesis Microchip Inc iPod iPod is a trademark of Apple Inc registered in the U S and other countries Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by
49. shuffle play mode or turn off repeat mode e Repeat options vary depending on the disc type 28 EN Downloaded From TheatreS ystem Manual com Manuals Play MP3 WMA music MP3 WMA is a type of highly compressed audio file files with mp3 or wma extensions 1 Insert a disc or USB that contains the MP3 WMA music 2 Press DISC MENU or USB A contents menu is displayed W Select a folder then press OK 4 Select a track to play then press PAI e To return to the main menu press A until Previous folder is selected then press OK e For CDs recorded in multiple sessions only the first session is played e This unit does not support MP3PRO audio format e If any special characters are present in the MP3 track name ID3 or album name it might not be displayed correctly on the screen because these characters are not supported e Some WMA is protected by Digital Rights Management DRM it cannot be played on this unit e Folders files exceed the supported file limit of this unit will not be displayed or played Tips e To display the data disc contents without folders see chapter Adjust settings Preference Setup gt MP3 JPEG Nav for details Play photo Play photos as slideshow This unit can play JPEG photos files with jpeg or Jpg extensions 1 Insert a disc or USB that contains the JPEG photos 2 Press DISC MENU or USB gt For a Kodak disc t
50. t 1 Press E OPTIONS 2 Press W to select Preference Setup then press P 3 Press then select DivX Subtitle in the menu 4 Select the character set that supports the subtitle The contents of the USB flash drive cannot be read e The USB flash drive format is not compatible with this Home Theater System e Drive is formatted with different file system which is not supported by this unit e g NTFS e Maximum size of memory supported is 160GB The video movies photos video clips etc contents of the iPod does not display in Extended Control mode e Video browsing is not supported in Extended Control mode you can only browse the video contents on the iPod itself 11 Glossary A Aspect ratio Aspect ratio refers to the length to height ratio of TV screens The ratio of a standard TV is 4 3 while the ratio of a high definition or wide TV is 16 9 The letter box allows you to enjoy a picture with a wider perspective on a standard 4 3 screen D DivXx The DivX codec is a patent pending MPEG 4 based video compression technology developed by DivX Inc It can shrink the file size of digital video and still maintain the high visual quality Dolby Digital A surround sound system developed by Dolby Laboratones that contains up to six channels of digital audio front left and right surround left and right centre and subwoofer DTS Digital Theatre Systems A surround sound
51. th multiple subtitle language Toggle through various repeat shuffle play mode or turn off repeat mode e Repeat options vary depending on the disc type e For VCDs repeat play is only possible when the PBC mode is turned off Zoom in out e To pan through the zoomed image press the cursor buttons Display current play status e You can change the video play options here without interrupting disc play Press and hold to view DVD play from different camera angles e Only applicable to DVDs that contain sequences recorded from different camera angles EN 25 English Play Access DVD menu DISC 1 Press DISC MENU to access disc main menu 2 Selecta play option then press OK n some menus press number buttons to input your selection e To return to the title menu during playback press BACK Access VCD menu The PBC Playback Control for VCD is turned on by default in the factory When you load in a VCD the contents menu is displayed 1 Press AV to select a play option then press OK to start play e If PBC is off tt skips the menu and starts play from the first title e During playback you can press gt BACK to return to the menu if the PBC mode is on Tips Sync audio output with video play If the video play is slower than the audio output sound does not match with the pictures you can delay the audio output to match the video
52. tible with your and colour intensity to produce a more TV display capability dynamic picture Options Descriptions Note Auto It detects and selects the best supported video e To adjust the above settings select an option and resolution automatically press OK Then press cursor left or right to change TO a T E TEAT E the value level setting and press OK to confirm 480p 576p Select a video resolution 720p 1080i that best supported by 1080p your TV See your TVs manual for details Note e Ifthe setting is not compatible with your TV a blank screen appears Press HDMI repeatedly until the picture appears EN 41 Downloaded From TheatreSystem Manual com Manuals Closed Caption Turn on or off display captions On show the sound effects in subtitle Only applicable to disc with Closed Caption information included and your TV supports this feature e Off disable closed caption Progressive If your TV can support progressive signals you can activate the progressive scan mode of this unit On turn on progressive scan mode e Off disable progressive scan mode Tips e See chapter Get Started Turn on Progressive Scan for detailed information 42 EN Downloaded From TheatreS ystem Manual com Manuals Preference Setup Press OPTIONS General Setup menu is displayed 2 Press W to select 8 then press PB
53. trol the title Button Action Change subtitle language SUBTITLE Smag Change audio language track AUDIO SYNC Stop play e For DivX Ultra video press this button again to display the contents menu INFO Display DivX Ultra video information Note e Only those DivX videos that were rented or purchased using the DivX registration code of this unit can be played see chapter Adjust settings gt General Setup gt DivX R VOD Code for details Ifthe subtitle does not appear correctly change the subtitle language see chapter Adjust settings Preference Setup gt DivX Subtitle for details he subtitle can only be displayed up to an average of 45 characters e This unit can play DivX video files that are up to 4GB in size EN 27 English Play Play music Note e For some commercial audio disc playback may resume from the point where it was last stopped To start playback from first track press I Control a track 1 Play a track 2 Use the remote control to control the track Button Action Pause resume play Stop play C Jump to the next track amp Return to the beginning of the current track or jump to the previous track GI L Direct enter the track number c lt lt gt gt Search backward forward e To change search speed press this button repeatedly PROGRAM Toggle through various repeat
54. woofer to the OPTICAL OUT socket on the device Note e To listen to the audio output from this connection press AUDIO SOURCE repeatedly until OPTICAL INPUT is displayed on the display panel EN 15 English Connect Connect portable media player MP3 LINK MP3 L 1 Connect a 3 5mm stereo audio cable supplied from the MP3 LINK socket on this unit to the phone socket on your portable media player such as MP3 player Note e To listen to the audio output from this connection press AUDIO SOURCE repeatedly until MP3 LINK is displayed on the display panel Connect USB device 1 Connect the USB device to 3 USB socket on this unit e This DVD Home Theatre unit can only play view MP3 WMA WMV DivX Ultra or JPEG files that are stored on such devices e To listen to the audio output from this connection press USB 16 EN Downloaded From TheatreS ystem Manual com Manuals Connect iPod docking station 1 Connect the iPod docking station to DOCK socket on this unit 2 To view videos photos from iPod connect the composite video cable from this docking station to your TV and switch to the corresponding channel on your TV Note e To listen to the audio output from this connection press iPod DOCK Mount the
Download Pdf Manuals
Related Search