NORDO 12 - Bax
Contents
1. eS SEEN ud Sa ere oe br ei SI DEE TTS 279 Firma LT ON HT Sansa gt i There is a on mute off switch provided on the body of the microphone When you turn the switch to the ON position the microphone should show activity and the green LED should light up When you put the switch in the center position the MUTE function will become active This means that the microphone is still active and connected to the receiver but it will mute all sound Remote control The included remote control activates the built in MP3 SD player with FM tuner You have control over Play Pause Stop Next Previous Volume up Volume Down EQ Repeat mode USB SD source Mute On Off and numerical buttons to access a certain track directly Using the built in USB SD player with FM tuner Use the USB SD player to play music from any USB or SD card source The unit supports WAV and MP3 source files When a USB or SD source is plugged in the player will automatically switch to that source and start playing With the included remote or with the buttons underneath the display you have full control The FM tuner can be used to listen to radio stations Use the buttons to scan for available frequencies or search for a specific frequency Volume EQ Echo and Mic The volume knob of the unit is used to change the master volume of the unit Turn it clockwise and the volume will increase Turn it counter clockwise and the volume will decrease2. DEVINE NORDO 12 User manual V1 1 Introduction Thank you for purchasing this Devine battery powered loudspeaker Before you unpack all the received items carefully read this manual to become familiar with the functions of the system Also check the contents of the box to make sure all necessary parts are included If the loudspeaker fails to operate properly or if you have any problems while using the system turn off the power and contact your selling point for more information and help Box contents 1x battery powered loudspeaker 1x IR remote with internal battery 2x 9V battery 2x wireless microphone 1x user manual 1x power cable Warning To avoid electric shocks do not open the system There are no user serviceable parts inside Before you connect the unit to a power supply check if the voltage matches with the power requirements of the system In case the system will not be used for a longer period of time remove the batteries from the handheld microphones For optimal performance of the system do not place any heat sources on the surface of this product do not place the system on top of a heat source such as a microwave or fireplace Keep the unit and microphones away from intense sunshine humidity dust and liquids Make sure the speaker is positioned ona stable horizontal platform during use such as a solid floor or a loudspeaker stand To avoid interference keep the unit and microphones
3. The built in equalizer is used to change the sound characteristics of the speaker The Treble knob is used to increase or decrease high tones The Bass knob is used to increase or decrease low tones This way you can adjust the sound for different venues If you use the speaker for presentation or speech purposes you can boost the high frequencies If you want to play music that contains lots of low frequencies you can turn up the bass indicator Please pay attention to the audio reproduction of the speaker If you hear any crackling or distorted sounds the speaker is performing beyond its maximum capacity Turn the volume down to avoid possible permanent damage Warranty is void when any defects are found caused by improper use Use the Echo knob to add some echo to the microphone signals This function is mostly used for karaoke and speech purposes Feel free to experiment with the amount of echo The Mic knob is used to increase or decrease the microphone level of all connected microphones Mic instrument and line connections It is possible to plug in extra audio devices such as MP3 player wired microphones or even semi acoustic or electric guitars MIC1 Guitar input This input has a 6 35 mm jackplug connector and is suitable for most wired microphones and instruments MIC2 input This input has a 6 35 mm jackplug connector and is suitable for most wired microphones Line in This input is used for additional line audio s
4. DEPARTMENTS ei N FUSE FIA u 1 USB SD player display 11 Line in stereo RCA cinch 2 USB SD player control buttons 12 Mix Out stereo RCA cinch 3 USB slot 13 wireless microphone volume control 4 SD card slot 14 Wireless microphone on off 5 Master volume 15 Retractable antenna 6 Master EQ with bass and treble control 16 DC 12V output for low power devices 7 Echo control for microphone signals 17 Charge Power LEDs 8 Microphone volume 18 On off switch 9 MlC1 instrument input 6 35mm jack 19 110V 220V switch DO NOT CHANGE 10 MIC2 input 6 35mm jack 20 IEC power connector Preparing the system Inserting batteries This system uses a 9V battery for the handheld microphones Each handheld microphone uses one 9V battery Always use good quality batteries as the battery life may vary This may result in a working time between 8 and 20 hours Use the included batteries only for testing purposes as their lifespan may vary Devine recommends the use of Duracell Pro batteries or any comparable quality for optimal performance results Insert the 9V battery by unscrewing the bottom of the microphone Pay attention to the placement of the connection terminals there is only one way to insert the batteries properly Screw the bottom cap back on and make sure it is turned tightly Do not apply too much force as this might cause damage to the housing a Wake ut y TSS
5. away from devices like large power supplies power transformators radarstations and computers do not place objects on top of the system Keep the unit and handheld microphones away from any sort of liquid moist or fluids to avoid short circuits Features battery powered active loudspeaker built in MP3 player FM radio tuner with USB and SD card support included remote 2 wireless microphones included built in wireless microphone receiver VHF frequency 199 6 MHz 197 15 MHz retractable antennas built in trolley system with retractable handle and two wheels on the bottom 12 inch woofer 1 inch tweeter 30W amplifier module Product overview The rear of the unit contains lots of connections and settings for your convenience This way you are able to connect additional equipment plus you have optimal control over volumes and the equalizer Please pay attention to the schedule below as it contains valuable information for optimal performance SD MMC MP3 LINE a E gt SCAN u ie gt gt REPEAT gt i MP3 WMA 4 Lag G G QHs D prayer VOLUME BASS TREBLE ECHO MIC VOLUME aD OLA ei MIC2 0 oO N ANYA A ME Rg No T W 7 y LINE IN MIX C VHF WIRELESS oo HE i N da RFA 3 veer N vo power ANT A ANT B A hy PN 459 y DC I2V ACI2V FUSE FGA DEVINE 5 Devine Nordo 12 Pu cR THERE ARE NO SPARE PARTS INSIDE THIS SPEAKER IF NECESSARY SEND IT TO LOCAL SERVICE
6. ensions and weight Size 340 x 310 x 575 mm Net weight 14 5 kg Gross weight 16 5 kg Accessories 2x wireless microphone 2x 9V test battery IR remote Power cord IEC Schuko
7. ources such as PA mixers MP3 players tablets smartphones or laptops and is equipped with stereo cinch RCA connectors Adapter cables to other stereo connectors XLR 6 35 mm jack and 3 5 mm mini jack are available at your local Devine dealer Mix Out This output is suitable to link this unit with multiple NORDO 12 units for compact PA venues The mixed output of all signals will be transferred to another unit Wireless microphone section This section is all about the wireless microphones The green and yellow LED show if there is a connection between the receiver and the transmitter The volume of each microphone is adjustable for optimal performance The wireless microphone section has an on off switch to save energy while operating with the internal battery Antenna section These retractable antennas are used for the wireless microphones They are retractable for your convenience and they can be positioned freely For the best reception Devine recommends to place the antennas in a 90 degree angle V shape positioned as high as possible for optimal reception and signal quality DC 12V These connection terminals are suitable for cables with bare wire This makes it possible to connect any low power 12V DC devices to your NORDO 12 such as small LED devices small cooling fans decoration lasers cigarette plug gadgets etc WARNING Do not connect a car battery car audio amplifiers or high powered devices as this might blow the inte
8. rnal fuse WARNING Do not connect a passive loudspeaker to this terminal output as this will blow up the speaker Devine is not responsible for any damage to this speaker or any connected devices caused by improper use Technical specifications Battery powered loudspeaker Built in rechargeable battery Can be used with a 230V power source Up to 8 hours of use with a full battery 12 inch woofer with 1 5 inch voice coil Tweeter with integrated horn Built in power amplifier 30 Watt Nominal system impedance 4 Ohms Trolley system with integrated wheels and retractable comfort handle 35 mm speaker stand adapter MP3 player Supports USB and SD Remote control included Display with control buttons Microphones 2x wireless microphone VHF frequency 199 6 MHz 197 15 MHz On off mute switch Works on 9V battery included Microphone holders on both sides of the speaker Microphone volume adjustable Optional microphone echo variable in output 2x 6 35mm jack input instrument mic and mic Line in stereo RCA mix out stereo RCA Controls mic volume VOL A VOL B Main mic volume Echo intensity Master volume VHF mic on off switch Power on off switch Indicators Charge LED indicator green Power LED indicator red RF A LED indicator green RF B LED indicator yellow VHF Power LED indicator red Power supply 110 230V AC 50 60 Hz 12V DC power outlet for small devices with wire terminals Dim
Download Pdf Manuals
Related Search