Cary Eclipse Pre-installation manual
Contents
1. Computer interface 7 1 Computer requirements 7 1 1 Publication date 03 01 Cary Eclipse software The minimum configuration represents the absolute minimum specifications you will require to operate the Cary Eclipse The recommended configuration is provided to allow sourcing of a new PC to be used with the instrument Minimum Recommended IBM compatible IBM compatible Intel Pentium II processor Intel Pentium II processor 32 M RAM 64 M RAM 200 MB free space on hard disk 500 MB free space on hard disk 3 5 1 44 MB floppy drive 3 5 1 44 MB floppy drive Video card supporting 800 x 600 resolution high color 16 bit mode Video card supporting 800 x 600 resolution high color 16 bit mode Super VGA screen Super VGA screen 16 x CD ROM drive 24 x CD ROM drive 16 bit sound card 16 bit sound card Windows 101 key keyboard Windows 101 key keyboard Microsoft or compatible mouse Microsoft or compatible mouse One spare PCI expansion slot One spare PCI expansion slot Continued 7 1 Cary Eclipse Pre installation manual 7 2 Microsoft Windows 98 or Microsoft Windows 98 or Windows NT including Windows NT including Service Pack 4 or later Service Pack 4 or later Microsoft Internet Explorer Microsoft Internet Explorer 4 or later is required for NT 4 or later is required for NT2. However the contents form part of a precision measuring system and all packages should be handled with care In transit sharp 6 1 Cary Eclipse Pre installation manual 6 2 jolts must be avoided and the packages should not be inverted or tilted unnecessarily Markings on the shipping cartons generally indicate which side of the package should be kept on top In house transit routes must be carefully considered Vertical horizontal and turning clearances should be calculated from the shipping carton dimensions of the spectrofluorometer refer to section 2 which is the largest unit in any system configuration Unpacking of the equipment is your responsibility and instructions are provided with the spectrofluorometer As the packages are opened the contents should be checked against the enclosed packing lists and any differences from the original order should be referred immediately to your Varian Sales Office All contents of the shipping packages should be assembled together when installation is to be carried out by Varian Service personnel Do not discard any packaging components or filler materials Warning Many of the packages are large and heavy To avoid the chance of injury to personnel or accidental damage to the equipment always use two or more people when handling the packages or lifting equipment into position NEVER attempt to lift the packages alone Publication date 03 01 Cary Eclipse Pre installation manual
3. in conformance with the temperature and humidity specifications Publication date 03 01 Cary Eclipse Pre installation manual 3 1 2 Particulate matter and fumes Sample preparation areas and materials storage facilities should be located in a separate room For optimum performance the area should have a dust free low humidity atmosphere A layer of dust on the electronic components could act as an insulating blanket and reduce heat transfer to the surrounding air Caution The Cary Eclipse is designed for operation in clean air conditions The laboratory must be free of all contaminants that could have a degrading effect on the instrument s components Dust acid and organic vapours must be expelled from the work area 3 1 3 Temperature Air conditioning is recommended The room should be temperature controlled if your analyses are particularly sensitive For optimum analytical performance it is recommended that the ambient temperature of the laboratory be between 20 25 C and be held constant to within 2 C throughout the entire working day gt Note As laboratory temperature increases system reliability decreases All electronic components generate heat while operating This heat must be dissipated to the surrounding air if the components are to operate correctly 3 1 4 Vibration Ensure that lab benches are free from vibration If possible any equipment generating vibration during operation should be installed o
4. should only be replaced by Varian authorized personnel Fuse information on the rear of the instrument is the most up to date External connections Mains inlet coupler 3 2 A 120 250 VAC 50 60 Hz IEC type Country Mains power cord Plug Australia 10 A 250 VAC Complies with AS3112 USA 10 A 125 VAC Complies with NEMA 5 15P Europe 6 A 250 VAC Complies with CEE7 sheet vii or NFC61 303 VA Publication date 03 01 Cary Eclipse Pre installation manual Publication date 03 01 Rear IEEE 488 GPIB Cary Eclipse system connection Front 25 Way D Range External accessory connection Sample Compartment 25 Way D Range Internal accessory connection 15 Way D Range Internal accessory connection 9 Way D Range Internal accessory connection Please consult your monitor and printer manuals for details of their individual cabling requirements as well as the Cary Eclipse Hardware operation manual for details of the electrical connections required for operating the optional accessories 4 3 Cary Eclipse Pre installation manual This page is intentionally left blank 4 4 Publication date 03 01 Cary Eclipse Pre installation manual Gas supplies 5 1 Nitrogen Publication date 03 01 All gas supply installations must comply with the rules and or regulations that are imposed by the local authorities responsible for the supply of compressed gas energy to the workplace Cylinders containing gas under
5. that may be deposited on the instrument optics Only use nitrogen from a supplier who fills containers from immersion pumps that are lubricated with liquid nitrogen 5 1 Cary Eclipse Pre installation manual 5 2 Note The instrument warranty will be void if damage is caused by the use of contaminated nitrogen Operating pressure for the nitrogen purging system is recommended at up to 70kPa 10 psi Use a suitable regulator and gauge assembly to ensure that the nitrogen supply is maintained at correct pressure Nitrogen supply tubing should be clean flexible plastic tubing 6 mm 1 4 inside diameter Tygon PVC or equivalent Do not use rubber tubing as this is usually treated internally with talc which will be carried into and contaminate the instrument optics The nitrogen system should include a manifold assembly with inlet from the supply and two outlets for connection to the instrument Manifold outlets should each be fitted with a stop valve and flowmeter for control of gas flow to the instrument Flow meters should be adjustable for flow rates of 0 to 30 litres per minute 0 to 64 cubic feet per hour Publication date 03 01 Cary Eclipse Pre installation manual Equipment on site 6 1 Insurance As the carrier s liability ceases when the equipment is delivered Varian recommends that the instrument owner arrange a separate insurance to cover transportation from the delivery point to the installati
6. with these units and arrange the operating environment to suit the complete system 3 1 Environmental control You are responsible for providing an acceptable operating environment Attention paid to the operating environment will ensure the continued high performance of your Cary Eclipse instrument The instrument warranty will be made void if the equipment is operated in sub standard conditions Publication date 03 01 3 1 Cary Eclipse Pre installation manual 3 2 Environmental control Temp Relative Humidity Condition Altitude m C t non condensing Non operating 0 2133 transport 0 7000 ae 2000 Non operating pees sea level 40 91 95 dielectric strength tests Operating but not necessarily 0 2000 5 31 lt 80 meeting 0 6562 31 40 lt 80 3 33 t 31 performance specifications 0 853 Operating 0 2800 10 35 within B80 performance specifications p 853 SR 10 25 2800 7000 Humidity The relative humidity of the operating environment should be between 8 and 80 with no condensation Operating a Cary Eclipse in very low humidity may result in the accumulation and discharge of static electricity that shortens the life of electronic components Operating at high humidity will produce condensation and result in short circuits Varian recommends that your laboratory be equipped with a temperature humidity monitor This will ensure that your laboratory is always
7. 1 Cary Eclipse Pre installation manual Setting up your PC 8 1 Cary Eclipse software The Cary Eclipse software requires Microsoft Windows 98 or Windows NT to be installed on your PC For instructions on installing Windows please refer to the documentation supplied with Windows The Cary Eclipse software is not supported for Windows 95 Ensure that you have your Display Desktop area set to at least 800 by 600 pixel s and that the Color palette is set to High color 16 bit For instructions please refer to the documentation supplied with Windows The Varian CSR will install the Cary Eclipse software during their visit Installation of the Windows operating system is not included as part of the standard instrument installation 8 2 Internet browser Publication date 03 01 Note For installations using Windows NT operating system it is important that Microsoft s Internet Explorer version 4 IE4 or later be installed before installing the Cary Eclipse software Installation of the browser is required to provide files required for the Cary Eclipse On line help to function If you are using Windows 98 no installation is required as the files required are installed with the operating system You can continue to use your preferred browser and shortcuts to the IE4 program can be removed from the desktop and program selection if desired IE4 can be downloaded from Microsoft s web site www microso
8. CARY Cary Eclipse Pre installation manual Installation category ll Pollution degree 2 Safety class EN 61010 1 dr E 85 101740 00 VARIAN March 2001 Cary Eclipse Pre installation manual il Varian offices Varian has offices in most countries The major offices for optical spectroscopy products are listed below Varian Australia Pty Ltd Manufacturing site 679 Springvale Road Mulgrave Victoria 3170 Australia International telephone 61 3 9560 7133 International fax 61 3 9560 7950 Varian Instruments 2700 Mitchell Drive Walnut Creek CA 94598 USA Phone 1 800 926 3000 International telephone 1 925 939 2400 International fax 1 925 945 2102 Varian Chrompack Benelux Analytical Instruments Boerhaaveplein 7 4624 VT Bergen op Zoom International telephone 31 0164 282800 International Fax 31 0164 282828 Internet The Varian Internet home page can be found at http www varianinc com Varian Australia Pty Ltd is the owner of copyright on this document and any associated software Under law the written permission of Varian Australia Pty Ltd must be obtained before either the documentation or the software is copied reproduced translated or converted to electronic or other machine readable form in whole or in part Comments about this manual should be directed to the Marketing Communications Manager Varian Australia at the address above or by E mail to webmaster osi varian com Va
9. ating system installed 8 J A quartz fluorescence cell is available J Internet Explorer 4 installed 8 Oo Operator training is required 9 oO All applicable preparations have been completed Please arrange for the installation to be completed I fully understand that charges may be levied if the installation by Varian Service personnel is delayed due to facilities not being prepared in accordance with the information contained in this manual Company name and address Signed Name Telephone Preferred installation date 1 5 Cary Eclipse Pre installation manual 1 6 Note The remainder of this manual contains the environmental requirements and technical specifications for the Cary Eclipse and should not be discarded Keep this manual for future reference Your local Varian office is Varian Office card to be attached here Publication date 03 01 Cary Eclipse Pre installation manual Publication date 03 01 gt gt Weights and dimensions Before arranging for delivery of the Cary Eclipse to your facility please make sure that all passages to the site of installation are at least 1 1 metre wide Allow additional room for manoeuvring the shipping container around corners and or through doors The following tables identify the space and weight requirements of the Cary Eclipse components The instrument is designed to sit on a workbench that is wide enough t
10. blication date 03 01 Cary Eclipse Pre installation manual IL Pre installation 1 1 Introduction The Cary Eclipse fluorescence spectrophotometer has been designed to provide a complete analysis system for fluorescence phosphorescence and chemiluminescence measurements All Cary Eclipse instruments are been tested and proven to specification before dispatch from the manufacturing plant This publication Pre installation manual part number 85 101740 00 contains general information that is relevant to the preparation of an installation site and details the facilities which must be provided to ensure that the system can be operated properly and safely Publication date 03 01 1 1 Cary Eclipse Pre installation manual Detailed operating procedures are provided in the Cary Eclipse software on line Help system and in the operation manual that is supplied with the instrument Installations of the Cary Eclipse are undertaken by Varian trained and qualified Customer Service representatives CSR s Before the CSR attends your site to perform the installation you should complete the Pre installation Checklist contained in section 1 3 Strike out any entries not appropriate to your system then send a copy of the checklist to your local Varian Sales and Service Office or local Varian agent dealing with the installation of the equipment On receipt of this document the Varian representative will contact you to arrange a conven
11. ft com or obtained from your local software retailer A windows update disk containing IE4 will be shipped with the Cary Eclipse software Cary Eclipse Pre installation manual This page is intentionally left blank 8 2 Publication date 03 01 Cary Eclipse Pre installation manual 9 Operator training During the installation procedure the Varian Customer Service Representative CSR will demonstrate the basic operating procedures The CSR however is not necessarily experienced in complex analytical routines and is not authorised to conduct extensive training To ensure that your operators benefit the most from witnessing the installation performance tests operator training should be completed before your equipment is installed It is strongly recommended that you take advantage of the special training courses that are conducted at various locations by the Varian Customer Support and Sales Organisation In some areas it may be possible to arrange for operator training to be carried out after the installation using your own instrument To investigate this possibility please contact your local Varian Sales and Service Office Typical installation by a CSR for a standard Cary Eclipse system will be completed within four hours and the system will be ready for use However this time will be extended if the system includes major accessories The installation time can be kept to a minimum by ensuring proper site prepara
12. ient time for installation 1 2 Information symbols The following symbols and messages appear on the Cary Eclipse and relevant documentation 1 2 1 Warnings and Cautions Other specific warnings and cautions appear in this manual and detail the specific hazard describe how to avoid it and specify the possible consequences of not heeding the warning or caution Warning A Warning message appears in the manual when failure to observe instructions or precautions could result in death or injury Symbols depicting the nature of the specific hazard are also placed alongside warnings Caution A Caution message is used when failure to observe instructions could result in damage to equipment Varian supplied and or associated equipment A Note is used to give advice or information Read all warnings and cautions carefully and observe them at all times 1 2 Publication date 03 01 Cary Eclipse Pre installation manual A triangular symbol indicates a warning The meanings of the symbols that may appear alongside warnings in the documentation or on the instrument are as follows gt gt gt Electrical shock Eye hazard Noxious gases gt gt gt Hot surfaces Fire hazard Sharp edge gt gt gt Corrosive liquids Moving part Heavy weight danger to feet gt gt Heavy weight Part can be danger to hands ejected The adjacent symbol may be used on warning labels attached to the i
13. n the floor rather than alongside the system on the workbench 3 1 5 Exhaust system It is your responsibility to provide an adequate exhaust system An exhaust system is not required for normal operation of the instrument but should be installed if substances giving off toxic vapours are to be analysed Publication date 03 01 3 3 Cary Eclipse Pre installation manual 3 2 Work bench The workbench must be stable and strong enough to support the total weight of equipment to be used The worktops should be large enough to permit a free circulation of air around each unit in the system Remember to provide space for the computer monitor and printer The workbench should be about 90 cm 36 in high To avoid damage through spillage of the samples being analysed the worktops should be covered with a material that is corrosion resistant and impervious to liquids Spatial setup recommendations for Cary Eclipse Varian recommends that adequate space be allowed around the system for ease of access Our recommendations are as follows Recommendations Purpose Recommended distance Allow adequate Provide clear space 110 to 200 mm space behind the for air circulation 4 to 8 in system gas electrical and communication connections 3 4 Allow adequate space in front of the system Some accessories attach to the front of the instrument These may overhang the bench if adequate space is not allowed 150 mm 6 in when usi
14. ng the extended sample compartment and thermostatted accessories Publication date 03 01 Cary Eclipse Pre installation manual Varian recommends the following system layout N N ey i x pu Q Monitor toon td I Wily H 1 II 1 1 EEIT i i y i We Eclipse D I ji 1 i Optional i PC Printer i ccys to SSSSSSSSSeses SS O OO DO Note that the gas line is only required if purging of the optical windows and sample compartment are required Optional accessories may or may not require a power connection 3 3 Gas cylinder storage Where it is planned to use portable gas storage cylinders there must be arrangements to store the cylinders vertically where they can be firmly secured to a rigid support Refer to section 5 for more information Publication date 03 01 3 5 Cary Eclipse Pre installation manual This page is intentionally left blank 3 6 Publication date 03 01 Cary Eclipse Pre installation manual 4 Electrical specifications 4 1 Mains Supply The installation of electrical power supplies must comply with the rules and or regulations imposed by local authorities responsible for the supply of electrical energy to the workplace Warning Good electrical grounding is essential to avoid potentially hazardous shock hazards 3 wire outlet with ground connection must be
15. nstrument When you see this symbol you must refer to the relevant operation or service manual for the correct procedure referred to by that warning label Information symbols The following symbols appear on the Cary Eclipse or documentation to provide you with additional information symbol indicates that the product complies with C When attached to the rear of the product this the requirements of one or more EU directives a Indicates high voltage Xenon flash lamp present Publication date 03 01 1 3 Cary Eclipse Pre installation manual Federal Communications Commission advisory The following is a USA Federal Communications Commission advisory Caution This equipment generates uses and can radiate radio frequency energy and if not installed and operated in accordance with the instruction manual may cause interference to radio communications It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules which are designed to provide reasonable protection against such interference when operated in a commercial environment Operation of this equipment in a residential area may cause interference in which case the user at his or her own expense will be required to take whatever measures may be required to correct the interference CE Compliant Products The Cary Eclipse has been designed to comply with the requirements of the Electro magnetic Com
16. o allow access to all components and sturdy enough to support their combined weight Warning Many of the packages are large and heavy To avoid the chance of injury to personnel or accidental damage to the equipment always use two or more people when handling the packages or lifting equipment into position NEVER attempt to lift the packages alone 2 1 Cary Eclipse Pre installation manual 2 2 Instrument weights and dimensions System Unit Weight Width Depth Height kg lb mm in mm in mm in Cary Eclipse 31 68 600 24 610 24 280 11 Printer typical 5 5 12 380 15 300 12 120 5 Computer 20 44 520 20 520 20 400 16 typical Shipping weights and dimensions System Unit Weight Width Depth Height kg lb mm in mm in mm in Cary Eclipse 54 119 820 32 760 30 560 22 Printer typical 7 5 17 580 23 550 22 320 17 Computer 34 75 1200 48 600 24 320 23 typical Publication date 03 01 Cary Eclipse Pre installation manual 3 Environmental conditions Suitability The instrument is only suitable for indoor use in the following categories Q Installation category II Q Pollution degree 2 O Safety Class 1 EN 61010 1 Operating specifications for the PC Monitor and Printer Plotters may differ from those required for the Cary Eclipse instrument You must check in the literature provided
17. on site The delivery point will vary according to the carrier the shipping method and in some cases the terms of sale Some carriers will deliver only to their own distribution centre while others may deliver to your off loading bay Very few carriers will deliver to the actual installation site 6 2 Inspection for transit damage Publication date 03 01 Transit damage can be obvious or concealed and in either case will be admitted by the carrier only if it is reported within the terms of the carrier s agreement For any claims against damage in transit the following general rules apply Q Before accepting delivery you must inspect the packages for signs of obvious damage The nature of any obvious damage must be noted on the carrier s waybill which then must be countersigned by a representative of the carrier Q Within the time limit stated in the terms and conditions of carriage a further inspection must be made for concealed damage If any damage is found at this stage the carrier must be notified in writing You must retain all packaging material for subsequent inspection by a representative of the carrier Q A copy of any damage report must be forwarded to the Varian Sales Office dealing with the supply of your equipment After accepting delivery take the equipment to the installation site then unpack and check the contents Varian instruments are inherently robust and the packaging is designed to prevent internal damage
18. patibility EMC Directive and the Low Voltage electrical safety Directive commonly referred to as the LVD of the European Union Varian has confirmed that each product complies with the relevant Directives by testing a prototype against the prescribed European Norm EN and standards Proof that a product complies with the directives is indicated by A the CE Marking appearing on the rear of the product O the documentation package that accompanies the product containing a copy of the Declaration of Conformity This Declaration is the legal declaration by Varian that the product complies with the directives and also shows the EN standards to which the product was tested to demonstrate compliance It is signed by Varian s Authorized Representative in the EU and by a representative from the manufacturing plant 1 4 Publication date 03 01 Cary Eclipse Pre installation manual 1 3 Pre installation checklist Publication date 03 01 Before you arrange installation by Varian Field Service please complete the checks on this page and send a copy to your local Varian office Refer to Preparation Section Done Work area prepared and meets 3 s requirements Power supplies meet requirements 4 J Gas supplies as required i 5 oO Optional Nitrogen for optics purging The Cary Eclipse and any accessories are 6 m on site and unpacked Computer meets requirements 7 1 J Windows oper
19. pressure should be firmly secured to a rigid structure and the storage area must be well ventilated Never locate gas cylinders near a source of ignition or in a position that is subject to direct heat Gas storage cylinders often incorporate a pressure relief device which will discharge the gas at a pre determined temperature usually around 52 C 125 F If gases are to be plumbed from a remote storage area to the instrument site ensure that the local outlets are fitted with shut off valves and suitable regulators that are easily accessible to the instrument operator supply The Cary Eclipse is fitted with a connection point for purging of the sample compartment windows and sample compartment Purging of the windows and sample compartment may be required when using low temperature accessories that could cause condensation to form on the windows or cells as they cool More details are provided in the Cary Eclipse on line help system Nitrogen supplies are not available from Varian but may be obtained from commercial suppliers Liquid nitrogen in conjunction with a heat exchanger is recommended because it is generally less costly than compressed nitrogen and is of better quality Where compressed nitrogen must be used the gas must be dry oil free and uncontaminated Do not use compressed nitrogen from a supplier who uses oil or water in the compression process these methods leave fine particles of oil or water suspended in the nitrogen
20. provided for the instrument Make certain that power outlets are earth grounded at the grounding pin All power supplies must be single phase AC voltage three wire system active neutral earth and should be terminated at an appropriate power outlet receptacle that is within reach of the instrument power cord assembly For safety reasons a separate power outlet receptacle should be provided for each unit in the system Do not use extension cords or outlet adaptors All Cary Eclipse instruments are supplied with a 2 metre 6 6 long power cord and three pin plug assembly that is compatible with common standards applicable in most areas Avoid using power supplies from a source that may be subject to electrical or RF interference from other services large electric motors elevators and welders for example Publication date 03 01 4 1 Cary Eclipse Pre installation manual 4 2 4 2 4 3 Note Fuses Note Note Mains voltage requirements System Unit Required Supply Voltage ao Cary Eclipse SA rene aes 180 VA OER 100 ore Ap VAC TA pe ea a Tov The table above is indicative only Refer to the literature provided with the computer printer etc for details of individual power requirements Two fuses are used in the Cary Eclipse Both are of type T3 15 AH 250V IEC 2 Sheet 5 5 x20mm for safety reasons any other internal fuse or circuit breaker is not operator accessible and
21. rian Australia is IS09001 certified 1999 Varian Australia Pty Ltd A C N 004 559 540 All rights reserved Windows 98 and Windows NT are registered trade marks of Microsoft Corporation Publication date 03 01 Cary Eclipse Pre installation manual Publication date 03 01 Contents 1 1 1 2 1 3 3 2 3 3 4 1 4 2 4 3 5 1 6 1 6 2 7 1 Pre installation i Luisiana Introduction Information symbols 1 2 1 Warnings and Cautions Pre installation checklist Weights and dimensions iirriiienienee Environmental conditions rrrrrrrereeeeeee Environmental control 3 1 1 Humidity 3 1 2 Particulate matter and fumes 3 1 3 Temperature 3 1 4 Vibration 3 1 5 Exhaust system Work bench Gas cylinder storage Electrical specifications ricer Mains Supply Fuses External connections Gas supplies enssins aniisi Nitrogen supply Equipment On Site ccsssscccsssseeessseeeesssseeeeeees Insurance Inspection for transit damage Computer interface erre Computer requirements 7 1 1 Cary Eclipse software ili Cary Eclipse Pre installation manual iv 7 2 8 1 8 2 7 1 2 IEEE 488 interface 7 1 3 Recommended printer Interconnecting cables Setting up your PC v ein Cary Eclipse software Internet browser Operator training crriiereeeee 7 2 7 2 7 2 8 1 8 1 Pu
22. systems systems Varian can supply a PC for the Cary Eclipse software in the recommended configuration with Windows 98 as part number 79 100263 00 The operating system software will be pre loaded All software disks and manuals will be supplied to the customer PCs supplied with Letter of Credit orders will be an international brand and will be the Recommended configuration or better Better PC components can be substituted for those listed above eg processor type amount of memory screen size and resolution operating system version etc IEEE 488 interface The Cary Eclipse requires an IEEE GPIB card to be fitted in the PC This card is included with your instrument The Varian CSR they will install the GPIB card in your PC If you are supplying your own PC you will need to install the card yourself The Cary Eclipse Hardware manual supplied with the instrument contains installation instructions for the IEEE GPIB card Recommended printer You can use any printer supported by your Microsoft Windows operating system Interconnecting cables The monitor printer plotter and Cary Eclipse are connected to the PC via cables that plug into the back of the PC The Cary Eclipse is connected via a shielded IEEE 488 cable provided with the instrument The keyboard is also plugged into the PC Please consult your monitor and printer manuals for details of their individual cabling requirements Publication date 03 0
23. tion and easy access to all equipment The initial software installation and preliminary operational tests will take around thirty minutes There is then a period of two hours that must be allowed for instrument warm up before the detailed instrument tests for conformance to specification can be carried out During this time the CSR will demonstrate some of the basic system operating procedures An automated software process performs operational tests that will take around thirty minutes The results from these tests can be directly compared against the same tests completed at the factory before shipment Publication date 03 01 9 1 Cary Eclipse Pre installation manual 9 2 If your system computer was purchased from Varian it will be configured formatted partitioned and loaded with its operating system The Cary Eclipse software will be installed during installation Please note that you must have a working knowledge of the computer operating system as this type of instruction is not provided by Varian The literature supplied with the Cary Eclipse provides step by step instructions for setting up the system and detailed operating instructions for the analysis procedures it does not include instructions for operation of the computer Publication date 03 01
Download Pdf Manuals
Related Search