Home
2008 All Forks Owners Manual
Contents
1. BICYCLES IF YOUR FORK IS GOING TO BE USED ON PUBLIC ROADS AT ANY TIME IF YOU HAVE QUESTIONS REGARDING C PS C REFLECTORS PLEASE CONTACT YOUR DEALER IS CRITICAL THAT YOU SELECT AND USE THE SUSPENSION FORK THAT IS APPROPRIATE FOR YOUR ANTICIPATED RIDING STYLE THAT YOU USE THE FORK PROPERLY AND FOLLOW THE WARNINGS CONTAINED IN THE OWNER S MANUAL REGARDLESS OF THE RIDING STYLE FAILURE TO PROPERLY MATCH THE FORK TO YOUR FRAME OR RIDING STYLE COULD CAUSE THE FORK TO FAIL RESULTING IN A LOSS OF BICYCLE CONTROL AND POSSIBLY SERIOUS INJURY OR DEATH TO THE RIDER IN ADDITION AN IMPROPER COMBINATION OF FRAME AND FORK FOR THE INTENDED CATEGORY WILL VOID THE FORK S WARRANTY VISIT OUR WEBSITE WWW HBSUSPENSION COM IU FOR MORE DETAILED INFORMATION AND GUIDANCE ON FORK SELECTION FOR YOUR RIDING STYLE YOU SHOULD ONLY ATTACH GENERATORS RACKS AND DISC BRAKES TO THE DESIGNATED MOUNTING POINTS PROVIDED ON THE FORKS NEVER MAKE ANY MODIFICATION TO YOUR FORK TO ATTACH ANY EQUIPMENT THERE IS A HEIGHTENED LEVEL OF VOLUNTARY RISK ASSOCIATED WITH FREERIDING DIRT JUMPING AND DOWNHILLING LARGER STUNTS JUMPS MEAN MORE POTENTIAL FOR EQUIPMENT ISSUES OR PROBLEMS AND THE LIKELIHOOD OF SERIOUS INJURY 15 GREATLY INCREASED LEARN HOW TO PROPERLY RIDE AROUND OBSTACLES ON THE TRAIL OR ROAD HITTING OBSTACLES SUCH AS CURBS ROCKS TREES ROOTS HOLES OR SIMILAR OBSTACLES STRAIGHT ON PUTS FORCES ON YOUR FORK IT WAS NOT DESIGNED TO ABSORB LANDING IMP
2. 2008 OWNERS MANUAL MAINTENANCE Your fork requires periodic maintenance cleaning and inspection This is because moisture and contamination may build up inside the fork depending on the severity of riding conditions To maintain top performance it is recommended that the fork be periodically disassembled cleaned dried and relubricated You can download service and tuning instructions on the web at www HBsuspension com SUGGESTED SERVICE INTERVALS FOR ALL MANITOU SUSPENSION FORKS NORMAL CONDITIONS Short Sporadic Rides Long Frequent Rides Disassemble fork per Service Manual Disassemble fork per Service Manual Clean out casting and replace Semi Clean out casting and replace Semi Bath oil every 6 months Service Bath oil every 4 months Service damping systems by changing the damping systems by changing the damper oil every year Grease spring damper oil every year Grease spring stack as needed On air fork models stack as needed On air fork models check the oil level sitting on top of the check the oil level sitting on top of the air piston every 2 months per directions air piston every 6 weeks per directions found on www HBsuspension com found on www HBsuspension com SEVERE CONDITIONS Short Sporadic Rides Long Frequent Rides Disassemble fork per Service Manual Disassemble fork per Service Manual Clean out casting and replace Semi Clean out casting and replace Semi Bath oil every 4 months Service Bath oil every 3 mo
3. 60 NIXON 145 mm 167 mm DUAL CROWN CLAMPS 11 3 12 4 Nm 100 110 in Ib NIXON 160 mm 189 mm HEX AXLE BOLTS 3 4 4 5 Nm 30 40 GOLD LABEL JUMP 80 mm 110 mm REMOTE HANDLEBAR CLAMP 0 45 0 68 Nm 4 GOLD LABEL JUMP 100 mm 130 mm REMOTE LEVER CABLE CLAMP SCREW 0 34 0 56 Nm 3 5 TRAVIS single crown 150 mm 162 mm TRAVIS single crown 180 mm 192 mm TRAVIS single crown 203 mm 215 mm TRAVIS dual crown 203 mm 246 mm SPV PRESSURE Pressurize the red Schrader valve to the following percentage of your body weight Pounds and PSI 50 70 of your body weight between minimum 40 and maximum 175 psi for shocks 30 40 of your body weight between minimum 40 and maximum 175 psi for forks with SPV or SPV Evolve 35 50 of your body weight between minimum 40 and maximum 175 psi for forks featuring Snap Valve SPV Kg and Bar 7 5 10 5 of your body weight between minimum 2 75 and maximum 12 bar for shocks 4 5 6 5 of your body weight between minimum 2 75 and maximum 12 bar for forks with SPV or SPV Evolve 5 25 7 5 of your body weight between minimum 2 75 and maximum 12 bar for forks featuring Snap Valve SPV 8 manitou 2008 OWNERS MANUAL WORLDWIDE LIMITED WARRANTY HB Suspension producer manufacturer warrants to the original retail purchaser you that the HB Suspension product for which they received this warranty is free from defects in material and w
4. FULL FACE HELMET FULL FINGER GLOVES AND BODY ARMOR HAVE YOUR BICYCLE INSPECTED BY A QUALIFIED MECHANIC BEFORE EVERY EVENT AND BE SURE IT IS IN PERFECT WORKING CONDITION ROUTINE AND THOROUGH MAINTENANCE IS EVEN MORE CRITICAL THAN WITH A BIKE NOT USED FOR DOWNHILLING OR FREESTYLE RIDING CONSULT WITH EXPERT RIDERS AND RACE OFFICIALS ON CONDITIONS AND EQUIPMENT ADVISABLE AT THE SITE WHERE YOU PLAN TO RIDE DOWNHILL OR FREESTYLE SUSPENSION AND DISK BRAKES MAY INCREASE THE HANDLING CAPABILITIES AND COMFORT OF YOUR BICYCLE AND MAY ALLOW YOU TO RIDE FASTER BUT DO NOT CONFUSE THE ENHANCED CAPABILITIES OF A SUSPENSION BIKE WITH DISK BRAKES WITH YOUR OWN CAPABILITIES INCREASING YOUR SKILL WILL TAKE TIME AND PRACTICE PROCEED CAREFULLY UNTIL YOU ARE SURE YOU ARE COMPETENT TO HANDLE THE FULL CAPABILITIES OF YOUR BIKE WHILE THE RUGGED APPEARANCE OF MOUNTAIN BIKES AND THESE DISK BRAKES MIGHT SUGGEST THEY ARE INDESTRUCTIBLE THEY ARE NOT CERTAINLY THEY ARE TOUGH AND STURDY DOWNHILL OR FREESTYLE RIDING OR RACING PLACES EXTREME STRESS ON BICYCLES AND THEIR COMPONENTS LIKE IT DOES RIDERS REPEATED USE OF A FORK IN DOWNHILL RIDING MAY RESULT IN SUDDEN OR PREMATURE FAILURE OF A BICYCLE OR COMPONENT RESULTING IN SEVERE INJURIES IF YOU PARTICIPATE IN THESE TYPES OF EVENTS THE LIFETIME OF THE PRODUCT MAY BE SIGNIFICANTLY SHORTENED DEPENDING UPON THE LEVEL AND AMOUNT OF RACING THE NORMAL WEAR OF A COMPONENT MAY DIFFER GREATLY BETWEEN COMPETITIV
5. REMOVING AND REPLACING THE STEERER TUBE WILL RESULT IN AN UNSAFE CONDITION AND SHOULD NEVER BE DONE A YSI INSTALLATION INSTRUCTIONS Ensure that the proper steerer tube has been delivered on your fork first The steerer tube may need to be cut to length to fit your bicycle head tube If you are not familiar with this procedure or do not have the proper tools to cut the steerer tube it is recommended that you seek a dealer with a qualified bicycle mechanic to perform the installation When cutting a steering column of a fork make sure to measure twice before cutting forks cut too short during installation are NOT covered by the warranty BREAK IN Your new fork is designed to break in during your first few rides about 20 hours total riding time Prior to break in you may notice your fork feels tight and slightly notchy Following the break in period your fork will feel much smoother and will react to bumps much better than when you first put it on your bike After 20 hours you may want to recheck adjustments where applicable to fine tune the fork completely WHENEVER YOU INSTALL ANY NEW COMPONENT ON YOUR BIKE MAKE SURE YOU THOROUGHLY TRY IT OUT CLOSE TO HOME WITH YOUR HELMET WHERE THERE ARE NO OBSTACLES TRAFFIC OR OVERLY CHALLENGING TERRAIN MAKE SURE EVERYTHING IS WORKING PROPERLY BEFORE GOING OFF ON A RIDE OR TO A RACE 4 manitou 2008 OWNERS MANUAL FORK INSTALLATION SINGLE CROWN FORKS 1 Remove the old fo
6. TRAVEL MEASUREMENT MINIMUM BRAKE ARCH MAXIMUM FORK MODEL OIL LEVEL CLEARANCE TIRE WIDTH R7 110 125 FORK MODEL See Figure A See Figure B R7 MRD 130 140 mm R7 MRD R7 125 60 mm MINUTE 100 110 mm MINUTE SPV 80 90 mm d MRO MINUTE 9 5 63 mm MIN TE 29 MINUTE MRD 130 140 mm NIXON 17 0 mm 65 mm GOLD LABEL DJ 110 115 mm GOLD LABEL 14 2 mm 65 mm NIXON See Service Manual on Web TRAVIS 11 4 70 mm TRAVIS See Service Manual on Web TABLE 5 DUAL CROWN SIZING TABLE 3 SAG MEASUREMENT FORK TRAVEL SAG 80 mm 12 16 100 mm 15 20 mm 120 mm 18 30 130 26 33 mm 140 mm 27 36 mm 145 mm 29 37 mm 150 mm 30 45 mm 160 mm 32 47 mm 170 mm 34 50 mm 180 mm 36 54 203 mm 40 60 mm NOTE Measurements taken on outside of the stanchion leg CUP TO CUP MEASUREMENT DUAL CROWN SIZE MODEL TRAVEL MEASUREMENT SE R7 MRD 87 30 mm 9 mm 130 169 mm Small flat upper crown 87 MRD 87 100 mm T10 mm 150 185 mm Large drop upper crown R7 80 mm 103 mm 2 from the bottom of the lower headset R7 100 mm 123 mm MINUTE 100 mm 124 mm MINUTE 120 mm 144 mm MINUTE 29 80 mm 104 mm MINUTE 29 100 mm 124 tam ITEM TORQUE SPECIFICATIONS Nm in Ibs MINUTE 29 120 mm 144 mm TRAVIS INTEGRATED STEM 5 7 6 8 Nm 50
7. this warranty controls over all translations and HB Suspension is not responsible for any errors in translation of this warranty or any product instructions This warranty is not intended to confer any additional legal jurisdictional or warranty rights to you other than those set forth herein or required by law If any portion of this warranty is held to be invalid or unenforceable for any reason such finding will not invalidate any other provision For products purchased in countries other than the United States please contact HB Suspension s authorized distributor or retailer in that respective country Warranty Service To obtain service under this warranty you must bring or send your HB Suspension product together with this warranty the retail seller s original receipt or other satisfactory proof of the date of purchase to the retailer where you purchased the item or another authorized HB Suspension retailer or authorized HB Suspension distributor Any postage insurance or other shipping costs incurred in sending your HB Suspension product for service is your responsibility HB Suspension will not be responsible for products lost or damaged in shipping For products purchased in countries other than the United States please contact HB Suspension s authorized distributor or retailer in the country where the product was purchased They can be found on our website at www HBsuspension com Warranty Exclusions Retailers and s
8. E AND NON COMPETITIVE USES WHICH IS WHY PROFESSIONAL LEVEL RIDERS OFTEN USE NEW BIKES AND COMPONENTS EACH SEASON AS WELL AS HAVE THEIR BIKES SERVICED BY PROFESSIONAL MECHANICS A 2117 REDUCED FORK LIFE THE LIFE OF THIS FORK WILL BE REDUCED IF 1 YOU USE IT MORE THAN THE AVERAGE USER 2 YOU ARE HEAVIER THAN THE AVERAGE RIDER 3 THE TERRAIN YOU RIDE ON IS ROUGHER THAN AVERAGE 4 YOU TEND TO BE HARDER ON COMPONENTS THAN THE AVERAGE RIDER 5 IT IS INSTALLED OR MAINTAINED IMPROPERLY 6 IT MUST ENDURE MORE ADVERSE ENVIRON MENTAL CONDITIONS THAN THE AVERAGE FORK 1 SWEAT CORROSIVE MUD SALTY BEACH AIR ETC AND OR 7 YOU DAMAGE IT IN A CRASH JUMP OR THROUGH OTHER ABUSE THE MORE FACTORS YOU MEET THE MORE ITS LIFE WILL BE REDUCED HOWEVER IT IS IMPOSSIBLE TO SAY HOW MUCH A PRESS Fit crowns THE STEERER TUBE ON BOTH SINGLE AND DOUBLE CROWN FORKS AND STANCHIONS INNER LEGS ON SINGLE CROWN FORKS ARE PRESS FIT AT THE FACTORY AND SHOULD NEVER BE REMOVED FROM THE CROWN PRESSING THEM OUT WILL PERMANENTLY DAMAGE THE CROWN BEYOND REPAIR AND RENDER IT UNSAFE FOR ANY CONTINUED USE NEVER ATTEMPT TO THREAD A THREADLESS STEERER TUBE CUTTING THREADS WILL WEAKEN THE STEERER TUBE AND CAUSE AN UNSAFE CONDITION OBTAIN THE CORRECT CROWN STEERER FROM YOUR DEALER OR CONTACT HB SUSPENSION CUSTOMER SERVICE AT 888 686 3472 REPLACEMENT OF THE ENTIRE CROWN STEERER ASSEMBLY MUST BE DONE TO INCREASE STEERER TUBE LENGTHS OR CHANGE DIAMETERS
9. ITY OF INJURY OR POSSIBLE DEATH PRIOR TO EVERY RIDE YOU SHOULD CLOSELY EXAMINE YOUR SUSPENSION FORK AFTER CLEANING IN BRIGHT SUNLIGHT TO ENSURE THAT NO DAMAGE HAS OCCURRED DURING THE COURSE OF RIDING TRANSPORTING OR AFTER A FALL PAY PARTICULAR ATTENTION TO THE CROWN INNER LEGS OUTER LEGS DROPOUTS BRAKE ARCH AREAS AND STRESS POINTS SUCH AS WELDS SEAMS HOLES AND POINTS OF CONTACT WITH OTHER PARTS ETC DO NOT RIDE YOUR BICYCLE IF THE FORK SHOWS ANY SIGNS OF BENDING LEAKING CRACKING CREAKING SQUEAKING CLUNKING OR ANY OTHER UNFAMILIAR NOISES OR IF IT IS MISSING ANY OF THE ORIGINALLY SUPPLIED COMPONENTS CONTACT YOUR DEALER OR HB SUSPENSION CUSTOMER SERVICE AT 888 686 3472 IF YOU HAVE ANY QUESTIONS CONCERNING THE FUNCTION INTEGRITY OR CONDITION OF YOUR FORK ANY MODIFICATIONS NOT AUTHORIZED IN THIS MANUAL SHOULD BE CONSIDERED UNSAFE IF YOU ARE A MODERATE OR AGGRESSIVE OFF ROAD RIDER OR RIDE AT LEAST THREE TIMES A WEEK OVER ROUGH TERRAIN HB SUSPENSION RECOMMENDS RETURNING YOUR SUSPENSION FORK TO HB SUSPENSION EVERY 2 YEARS FOR A THOROUGH INSPECTION TAKE YOUR FORK TO A MANITOU AUTHORIZED DEALER WHO CAN ARRANGE FOR SHIPMENT TO HB SUSPENSION PHONE 888 686 3472 A 118 REFLECTORS MANITOU FORKS ARE DESIGNED FOR OFF ROAD USE AND AS SUCH THEY DO NOT COME WITH PROPER REFLECTORS FOR ON ROAD USE HAVE YOUR DEALER OR MECHANIC INSTALL PROPER REFLECTORS TO MEET THE CONSUMER PRODUCT SAFETY COMMISSION S 5 REQUIREMENTS FOR
10. NOTE Snap Valve SPV forks will have a much higher platform for a given pressure setting since it is a cross country marathon specific damper For the Snap Valve SPV system we recommend starting with 70 psi 4 8 bar in both the main spring and the Snap Valve damper leg Ideal setup with this system will have roughly equal pressures in both the main spring and the Snap Valve damper sides DO NOT RUN SPV PRESSURE BELOW 30 PSI 2 04 BAR PRESSURES BELOW 30 PSI 2 04 BAR WILL RESULT IN A LACK OF BOTH COMPRESSION AND REBOUND DAMPING AS WELL AS KNOCKING SENSATION IN THE FORK MAXIMUM SPV PRESSURE IS 150 PSI 10 2 BAR 4 Adjust SPV volume SPV Evolve forks only With a 16 mm socket wrench or the SPV 16 mm volume adjust socket part 85 3007 you can adjust the air volume in your SPV Evolve suspension The volume adjust hex is colored red and is located on top of the right leg Turning the volume adjuster inwards will create a more progressive damping effect and make the suspension firmer from mid stroke to bottom out Turning the volume adjuster outwards will make the suspension more linear in compression damping and have a softer finish REBOUND DAMPING ADJUSTMENT Rebound adjusters on Manitou forks are located on the bottom of the right fork leg Turning the knob clockwise as you are looking at the fork from the bottom increases rebound damping while turning the knob counterclockwise decreases rebound damping 6 manitou
11. P N 042134 25 ad lt D 6 lt SS EK HBSUSPENSION SYSTEMS LLC ENGLISH TABLES WARRANTY 9 DEUTSCH TABELLEN GARANTIE ESPA OL TABLAS GARANT A FRAN AIS TABLEAUX GARANTIE ITALIANO GARANZIA NEDERLANDS 40 GARANTIE PORTUGUES 47 GARANTIA manitou 2008 OWNERS MANUAL e ENGLISH MANITOU SUSPENSION FORKS CONGRATULATIONS ON CHOOSING THE LATEST IN SUSPENSION TECHNOLOGY AVAILABLE A 2008 MANITOU FORK This fork is fully assembled and ready to be installed onto your bicycle It comes equipped with either a 1 1 8 inch or a 1 5 inch steerer tube and may also be available in disc brake only or Hex Lock Thru Axle versions A handlebar mounted reflector must be used for on road use which is not included with your fork This manual is designed as a comprehensive guide for all 2008 Manitou fork models including TRAVIS GOLD LABEL JUMP SERIES NIXON MINUTE MRD MINUTE 29 MINUTE R7 MRD and R7 All figures and tables are located at the back of this manual This manual can also be downloaded from the www HBsuspension com website A GENERAL CONSUMER SAFETY INFORMATION BICYCLING IS A HAZARDOUS ACTIVITY THAT REQUIRES THAT THE RIDER STAY IN CONTROL OF HIS OR HER BICYCLE AT ALL TIMES ANY FALL FROM YOUR BICYCLE CAN RESULT IN SERIOUS INJURY OR EVEN DEATH READING THIS MANUAL ENTIRELY AND PROPERLY MAINTAINING YOUR BICYCLE AND SUSPENSION FORK WILL REDUCE THE POSSIBIL
12. RK ALL SUSPENSION FORKS REQUIRE REGULAR MAINTENANCE AND REPAIR THE HARDER YOU RIDE THE MORE OFTEN YOU MUST INSPECT AND MAINTAIN YOUR FORKS IF YOUR FORKS START MAKING ANY STRANGE NOISES CLUNKS CREAKS CLICKS OR FEEL LOOSE OR DIFFERENT IN ANY WAY THEY SHOULD NOT CONTINUE BEING USED BUT IMMEDIATELY HAVE A CERTIFIED MANITOU SERVICE CENTER INSPECT AND REPAIR THE FORKS BEFORE YOU RIDE AGAIN INSPECT YOUR FORKS REGULARLY TO SEE THAT THEY ARE NOT BENT DEFORMED CRACKED CHIPPED NO MATTER HOW SLIGHT THEY SHOULD NOT CONTINUE TO BE USED BUT ALSO IMMEDIATELY HAVE A CERTIFIED MANITOU SERVICE CENTER INSPECT AND REPAIR THE FORKS BEFORE BEING USED AGAIN IDENTIFY YOUR RIDING STYLE It is critical that you select and use the suspension fork that is appropriate for your anticipated riding style that you use the fork properly and follow all warnings contained in this owner s manual regardless of the riding style See below for different riding categories Visit our website at www HBsuspension com iu for more detailed information and guidance on fork selection for your riding style Trekking TK Trekking is similar to XC riding but not as aggressive as XC It involves slower riding typically on paved and smooth roads and no riding obstacles such as rocks roots or depressions Cross Country XC Also called marathon riding Involves riding along hilly trails where some bumps and smaller obstacles such as rocks roots or depressio
13. ROPERLY AFTER A JUMP OR DROP ALSO PUTS FORCES ON YOUR FORK IT WAS NOT DESIGNED TO ABSORB YOU SHOULD ONLY PERFORM JUMPS OR DROPS WHEN A TRANSITION OR DOWN RAMP IS AVAILABLE TO HELP YOUR BICYCLE AND FORK ABSORB THE IMPACT FORCES GENERATED DURING THE LANDING AND BOTH WHEELS SHOULD SMOOTHLY MAKE CONTACT WITH THE TRANSITION OR DOWN RAMP AT THE SAME TIME ANY OTHER TYPE OF LANDING IS DANGEROUS AS IT COULD OVERLOAD THE FRAME OR FORK AND RESULT IN A COMPONENT PART FAILURE AND AN ACCIDENT OR COULD CAUSE YOU TO LOOSE CONTROL OF THE BICYCLE EVEN WITHOUT A COMPONENT PART FAILURE THE STEEPNESS AND LENGTH OF THE TRANSITION OR DOWN RAMP DEPENDS ON THE HEIGHT FROM WHICH YOU JUMP OR DROP EVERY SITUATION IS DIFFERENT FOR EVERY RIDER CONSULT WITH AN EXPERIENCED RIDER BEFORE ATTEMPTING ANY JUMP OR DROP FAILURE TO PROPERLY RIDE AROUND OBSTACLES ON THE TRAIL OR FAILURE TO PROPERLY LAND AFTER A JUMP OR DROP COULD CAUSE YOUR FORKS TO FAIL RESULTING IN A LOSS OF BICYCLE CONTROL AND POSSIBLY SERIOUS INJURY OR DEATH TO THE RIDER RIDE ONLY IN AREAS SPECIFICALLY DESIGNATED FOR YOUR RIDING STYLE DO NOT MISUSE OR ABUSE YOUR FORKS LEARN HOW TO RIDE AND ALWAYS RIDE WITHIN YOUR ABILITIES OUT OF CONTROL RIDING PUTS THE EQUIVALENT OF YEARS OF HARD USE ON YOUR FORKS AFTER ONLY A FEW RIDES SOMETIMES THE DAMAGE IS NOT OBVIOUS TO THE USER BUT COULD HAVE FAILED INTERNAL COMPONENTS OR DAMAGED THE LOAD CARRYING ABILITIES OF THE MATERIALS USED IN THE CONSTRUCTION OF THE FO
14. e hex axle simply slip the axle into the dropout small axle hex side first into the large dropout hex Thread in the set bolt into the small hex side and snug slightly Push the fork up and down a few times to center the axle and hub and then tighten all pinch bolts to recommendations found in Table 6 14 Install the brake cable per manufacturer s instructions see WARNING below BRAKE CABLE INSTALLATION A VU FAILURE TO PROPERLY ROUTE AND SECURELY ATTACH THE FRONT BRAKE CABLE TO THE FORK CAN CAUSE SERIOUS INJURY OR DEATH Included with your fork is a small black disc brake cable guide part no 066455 that can be attached to the fork to aid in routing the cables to disc brake calipers Forks with integrated cable guides will instead come with a standard zip tie The best method we ve found is to attach the cable so that it runs down the outside of the left fork leg Make sure the brake line is not crimped and does not touch the tire as the fork moves through its range of travel WHEN INSTALLING THE WHEEL WITH A PROPERLY INFLATED TIRE CHECK TO MAKE SURE THE FORK ACHIEVES MINIMUM TIRE CLEARANCE FAILURE TO CONFORM TO RECOMMENDED TIRE CLEARANCE SPECIFICATIONS MAY CAUSE THE TIRE TO STOP SUDDENLY DURING USE CAUSING PERSONAL INJURY OR DEATH Measure minimum tire clearance from any point on the profile of the tire upward to the bottom of the brake arch see Figure A Compare to Table 1 for minimum brake arch clearance All figures a
15. ellers of HB Suspension products are not authorized to modify this warranty in any way It is your responsibility to regularly examine the product to determine the need for normal service or replacement This warranty does not cover the following Products that have been modified neglected or poorly maintained used for commercial purposes misused or abused or involved in accidents Damage occurring during shipment of the products such claims must be presented directly to the shipper e Products whose serial number has been altered defaced or removed Damage to products resulting from improper assembly or repair the use or installation of parts or accessories not compatible with the original intended use of the product or the failure to follow the product warnings and usage instructions Damage or deterioration to the surface finish paint aesthetics or appearance of the product The labor required to remove and or re fit and re adjust the item covered by this warranty Normal wear to the product Any products for which the consumer does not follow the warranty procedures outlined above For the current version of this warranty please visit our website at www HBsuspension com manitou 9 2008 OWNER S MANUAL HB Suspension LLC 5800 W Donges Bay Rd Mequon WI 53092 1 888 MTN DISC 1 888 686 3472 Fax 262 512 4219 Email hayestech hayesbrake com www hbsuspension com Copyright HB Su
16. equipped with the Twin Piston Chamber TPC damping system a simple turn of the knob located on top of the right leg is all that is needed to increase compression damping Turning the knob clockwise as you are looking from a rider s position increases the amount of compression damping making the fork stroke downward with more resistance while turning the knob counterclockwise decreases compression damping for a more active feel COMPRESSION DAMPING ADJUSTMENTS FLUID FLOW DAMPING FFD Forks equipped with the FFD damper do not have external compression damping adjustments PLATFORM ADJUSTMENT SNAP VALVE SPV and SPV EVOLVE With Snap Valve SPV Stable Platform Valve damping and SPV Evolve damping systems your suspension s compression damping characteristics platform and position sensitivity can be set with an SPV pump Manitou part 85 4163 For proper function of your SPV damping system follow this procedure 1 Start by removing the red SPV air cap located on the top of the right fork leg as you are looking at the fork from the rider s position Using a dedicated SPV pump Manitou Part 85 4163 inflate the fork to the pressure recommended in Table 7 2 Check sag per procedure above 3 Adjust SPV pressure More pressure will create more compression damping hold the bike up more and pedal better Less pressure will create less compression damping allow more sag and be more responsive and supple
17. er s instructions 6 Insert the steerer tube into the head tube of the frame 7 Install the upper bearings stem spacers upper triple clamp and stem or integrated upper handlebar stem clamp 8 Install the stem cap and bolt Tighten the bolt to headset manufacturer s specifications 9 Install the handlebars and torque the stem pinch screws or stem clamping system to stem manufacturer s specifications Triple clamp steerer tube and handlebar bolts integrated crown stem models only should be tightened to recommendations found in Table 6 10 Install the brakes and adjust per the brake manufacturer s instructions 11 Adjust stanchion legs in the upper and lower crowns The top of the lower clamp must not be more than 15mm from the step down point in the upper stanchion tube leg 12 For forks with standard dropouts non through axle adjust the front wheel quick release to clear the 0 275 7 mm thick secondary catch dropout The quick release must be tightened to manufacturer s specifications after it is properly seated into the dropout counter bores Ensure that there is adequate thread engagement 4 or more threads with the release adjusted to lock Refer to your bicycle owners manual on the proper use and adjustment of the quick release lever NOTE 2008 forks with standard dropouts are equipped with a secondary catch dropout to retain the wheel in the fork in the event the quick release comes loose 13 To install th
18. f the left leg and using a dedicated shock pump Manitou part 85 4162 inflate the fork with the desired pressure Be aware that sometimes air systems lose a small amount of pressure when the pump is removed so you may want to check exactly how much your pump loses by reinstalling it after you have set and checked the pressure When setting sag on forks featuring IT Infinite Travel technology see ADJUSTING MAIN SPRING AIR PRESSURE below 6 If adjusting the preload or air pressure does not provide the proper sag you may require a new ride kit Please see recommended ride kits below mantou 5 2008 OWNER S MANUAL ADJUSTING MAIN SPRING AIR PRESSURE Remove the air cap located on either the top MARS Air or bottom IT Air Spring Noble Air of the left fork leg and using a dedicated air pump Manitou Part 85 4162 inflate the fork with the desired pressure Be aware that sometimes air systems lose a small amount of pressure when the pump is removed so you may want to check exactly how much your pump loses by reinstalling it after you have set and checked pressure Forks with Infinite Travel IT adjustment have their main air spring adjuster at the bottom of the left fork leg When pressurizing the main spring with IT you will need to turn your fork bike upside down to keep from getting oil inside your air pump pump to the desired setting and with the pump still installed depress the handlebar mounted travel adjus
19. justment Follow brake manufacturer s instructions CHECKING OIL LEVEL AA HIT SETTING THE PROPER OIL LEVEL IN YOUR DAMPED SUSPENSION FORK IS CRITICAL THE DAMPING IS LOCATED IN THE RIGHT LEG OF YOUR FORK NOT ENOUGH OIL WILL ALLOW FOAMING AND REDUCE THE PERFORMANCE TOO MUCH OIL WILL RESTRICT TRAVEL AND MAY CAUSE DAMAGE TO THE SYSTEM AND CREATE AN UNSAFE RIDING CONDITION FINISH READING THIS ENTIRE SECTION PRIOR TO ALTERING THE OIL LEVEL To check the oil level remove the compression assembly located in the right leg as you are looking at the fork from the rider s position Leave the spring stack in place to keep the fork fully extended Use a tape measure or dip stick to measure from the top of the fork crown down to where the oil sits Figure C See Table 4 for the correct oil level for your fork model NOTE Use SAE 5WT suspension fork oil from high quality manufacturers such as Motorex or Maxima If you have any questions regarding your 2008 Manitou suspension fork in the USA contact the HB Suspension Customer Service Department at 888 686 3472 or for information outside of the USA contact your authorized Manitou dealer or distributor You can also log on to www HBsuspension com and download this manual or see detailed instructions on how to service your suspension fork mantou 7 2008 OWNER S MANUAL TABLE 1 WHEEL CLEARANCE TABLE 4 OIL LEVEL HEIGHT TABLE 2
20. nd make the suspension firmer from mid stroke to bottom out COMPRESSION DAMPING ADJUSTMENT ABSOLUTE DAMPING and RCT REMOTE For forks equipped with Absolute damping a simple turn of the knob located on top of the right leg is all that is needed to add platform to the system Turning the knob clockwise as you are looking from a rider s position increases platform incrementally from an open position to what is essentially a closed position for increased efficiency while turning the knob counterclockwise decreases the amount of platform Forks equipped with the Absolute damper can be upgraded to the RCT remote system RCT Remote Control Trigger is an on or off system designed to be mounted on the handlebar for easier activation Note the retrofitable RCT lever makes it impossible to utilize Absolute s intermediate platform settings COMPRESSION DAMPING ADJUSTMENT TPC For forks equipped with TPC a simple turn of the knob located on top of the right leg is all that is needed to add compression damping Turning the knob clockwise as you are looking from a rider s position increases compression damping while turning the knob counterclockwise decreases compression damping Some forks featuring TPC may not have external compression adjustments Please consult the service manual located at www HBsuspension com for further instructions on how to adjust these forks COMPRESSION DAMPING ADJUSTMENTS TPC For forks
21. nd tables are located at the back of this manual Measure the tire at maximum width see Figure B Compare with Table 1 for maximum tire width INITIAL SET UP MEASURING TRAVEL the total amount of up and down movement To determine how much travel your fork has simply measure the distance from the top of the seal on the lowers or the bottom of the fork boot to the bottom of the crown See Table 2 to determine travel MEASURING SAG the amount your suspension compresses due to the weight of your body when in a natural riding position To measure sag you ll need a tape measure a pencil a piece of paper and a helper 1 Measure the distance from the front axle s centerline to the bottom of the crown when no one is sitting on the bike and write down this measurement Remember the exact locations of the two points because you ll need to use them later 2 Have the rider sit on the bike and measure the distance between the same two points as in step one It is important to be in the normal riding position weight centered with your feet on the pedals 3 Subtract the second measurement from the first The resulting measurement is the static sag see Table 3 4 On coil forks with preload adjusters turning the knob clockwise increases spring preload and decreases sag while turning the knob counterclockwise decreases spring preload and increases sag 5 On air forks remove the Schrader air cap located on the top or on the bottom o
22. ns may be encountered XC RIDING DOES NOT INCLUDE LARGE JUMPS OR DROPS riding off rocks fallen trees or ledges from any height XC forks must only be used with tires specifically designed for cross country riding XC forks can be used with disc rim or linear pull brakes All Mountain AM Riding with more emphasis on aggressive XC riding with larger obstacles and rough terrain AM RIDING DOES NOT INCLUDE LARGE JUMPS OR DROPS riding off rocks fallen trees or ledges from any height These forks should be used only with disc brakes as well as frames wheels and other components specifically designed for this riding style Freeride FR This riding style is for skilled riders and involves aggressive slopes very rough terrain large obstacles and moderate jumps Freeride forks should be used only with disc brakes as well as frames wheels and other components specifically designed for freeriding Dirt Jumping DJ Also called Urban Riding this type of riding is only for the most skilled riders and involves jumping from one mound of dirt to another and landing smoothly on a downside transition It also includes riding or jumping over and around man made or other concrete structures These forks should be used only with frames wheels and other components specifically designed for this riding style manitou 3 2008 OWNER S MANUAL Downhill DH This discipline is only for professional or highly skilled riders It includes u
23. nths Service damping systems by changing the damping systems by changing the damper oil every year Grease spring damper oil every year Grease spring stack as needed On air fork models stack as needed On air fork models check the oil level sitting on top of the check the oil level sitting on top of the air piston every 6 weeks per directions air piston every 4 weeks per directions found on www HBsuspension com found on www HBsuspension com ATED BEFORE EVERY RIDE YOU SHOULD Ensure that the quick release skewers are properly adjusted and tight Refer to your bicycle owners manual on the proper use and adjustment of the quick release lever and for other pre ride checks NOTE 2008 forks with standard dropouts are equipped with a secondary catch dropout to retain the wheel in the fork in the event the quick release comes loose 2 Ensure that all bolts are tightened to the appropriate torque recommendations by the parts respective manufacturer 3 Wipe the inner legs and clean the fork Check the entire fork for any obvious damage 4 Check the headset for proper adjustment To check for a loose front headset apply the front brake with both wheels on level pavement and push the bike forwards and backwards rapidly to see if you hear the headset rattling If it is then it is too loose Follow headset manufacturer s instructions to tighten 5 Ensure that the front brake cable is properly routed and check brake ad
24. orkmanship for ONE year two years in European Union countries from the date of original retail purchase This warranty is not transferable to a subsequent purchaser HB Suspension s sole obligation under this warranty is to repair or replace the product at HB Suspension s option HB Suspension must be notified in writing of any claim under this warranty within 60 days of any claimed lack of conformity of the product Warranty Limitations The duration of any implied warranty or condition of merchantability fitness for a particular purpose or otherwise on this product shall be limited to the duration of the express warranty set forth above In no event shall HB Suspension be liable for any loss inconvenience or damage whether direct incidental consequential or otherwise resulting from breach of any express or implied warranty or condition of merchantability fitness for a particular purpose or otherwise with respect to this product except as set forth herein Some states or countries do not allow imitation on how long an implied warranty lasts and some do not allow exclusions or limitations of incidental or consequential damages so the above imitations or exclusions may not apply to you This warranty gives you specific rights and you may also have other rights which may vary from location to ocation This warranty will be interpreted pursuant to the laws of the United States The original English language version meaning of
25. r bores Ensure that there is adequate thread engagement 4 or more threads with the release adjusted to lock Refer to your bicycle owners manual on the proper use and adjustment of the quick release lever Note 2008 forks with standard dropouts are equipped with a secondary catch dropout to retain the wheel in the fork in the event the quick release comes loose 13 To install the hex axle simply slip the axle into the dropout small axle hex side first into the large dropout hex Thread in the set bolt into the small hex side and snug slightly Push the fork up and down a few times to center the axle and hub and then tighten all pinch bolts to recommendations found in Table 6 14 Install the brake cable per manufacturer s instructions see WARNING below FORK INSTALLATION DUAL CROWN FORKS 1 Remove the old fork from your bicycle 2 Measure and cut the steerer tube to fit your bicycle head tube see CAUTION above You can use your old fork as a guide for cutting the steerer tube length To determine which upper triple clamp your frame will need see Table 5 3 Remove the headset crown race from the old fork and press onto the fork steerer until the race is seated snugly against the top of the crown per the headset manufacturer s instructions 4 Clean and grease the headset bearings and races per the headset manufacturer s instructions 5 Install the lower bearings if applicable on fork crown race per the headset manufactur
26. r to alter the spring rate from a medium to a firm setting Just turn the knob located at the top of the left leg from a rider s perspective clockwise for a firmer rate and counterclockwise for a lighter rate COMPRESSION DAMPING ADJUSTMENT AIR BACKED INTRINSIC TRAVIS For forks equipped with the long travel specific Intrinsic damper a simple turn of the knob located on top of the right leg is all that is needed to add compression damping Turning the knob clockwise as you are looking from a rider s position increases compression damping while turning the knob counterclockwise decreases compression damping 2008 Intrinsic damped forks have an air backed independent floating piston IFP The charge pressure of the air can be altered via a recessed valve to change the overall damping characteristics of the fork and increase decrease bottom out resistance This service should be performed by an Authorized Manitou Service Center COMPRESSION DAMPING ADJUSTMENT INTRINSIC DAMPING NIXON Forks equipped with the Intrinsic damping system are designed to be extremely supple in the initial 50 of their travel while still maintaining the bottomless feeling inherent with a traditional SPV damped fork Turning the red knob at the top of the right fork leg counterclockwise delays Intrinsic s anti bottoming properties until the fork is deeper in the stroke Turning the red knob clockwise will create a more progressive damping effect a
27. rk from your bicycle 2 Measure and cut the steerer tube to fit your bicycle head tube see CAUTION above You can use your old fork as a guide for cutting the steerer tube length 3 Remove the headset crown race from the old fork and press onto the fork steerer until the race is seated snugly against the top of the crown per the headset manufacturer s instructions 4 Clean and grease the headset bearings and races per the headset manufacturer s instructions 5 Install the lower bearings if applicable on fork crown race per the headset manufacturer s instructions 6 Insert the steerer tube into the head tube of the frame 7 Install the upper bearings stem spacers and stem 8 Install the stem cap and bolt Tighten the bolt to headset manufacturer s specifications 9 Install the handlebars and torque the stem pinch screws or stem clamping system to stem manufacturer s specifications 10 Install the brakes and adjust per the brake manufacturer s instructions 11 For forks equipped with IT or RCT remote lockout levers install the lever in an easily accessible position and torque to values indicated in Table 6 at the back of this manual 12 For forks with standard dropouts non through axle adjust the front wheel quick release to clear the 0 275 7 mm thick secondary catch dropout The quick release must be tightened to quick release manufacturer s specifications after it is properly seated into the dropout counte
28. se on relatively high jumps or drops and negotiating larger obstacles such as boulders fallen trees or holes These forks should be used only with disc brakes as well as frames wheels and other components specifically designed for this riding style INTENDED USES Visit our website at www HBsuspension com iu for more detailed information and guidance on fork selection for your riding style KOCH Trekking Forks for smooth pavement riding TK Intermediate terrain expeditions and competition use Cross Country All Mountain Riding based with more emphasis on aggressive XC riding with larger obstacles Freeride Forks for the roughest descents jumps and drops Dirt Jumping Suspension for big air manmade stunts and dual slalom courses Downhill Forks for aggressive riding and pro downhill racing GOLD LABEL JUMP SERIES MINUTE 29 MINUTE NIXON vunn ag Please see the website at www HBsuspension com for additional information DOWNHILL FREESTYLE OR COMPETITIVE RIDING TO RIDE DOWNHILL AT HIGH SPEED OR IN COMPETITION IS TO VOLUNTARILY ASSUME A VERY HIGH RISK AND DOWNHILL OR FREESTYLE RIDING CAN LEAD TO SERIOUS ACCIDENTS SPEEDS DOWNHILLING CAN REACH SPEEDS SEEN ON MOTORCYCLES WITH SIMILAR HAZARDS AND RISKS WEAR APPROPRIATE SAFETY GEAR INCLUDING A
29. spension Inc April 2007
30. ter This will equalize the two chambers in the fork leg and cause the pressure reading on your pump to drop Repeat the procedure until the pressure reading on the shock pump with the handlebar mounted travel adjuster depressed reaches the desired pressure Maximum main spring air pressure is 300 psi 20 4 bar Consult the website for further instructions if necessary When pressurizing the main spring with the Noble Air system you will also need to turn your fork bike upside down to keep from getting oil inside your air pump and pump to the desired setting Maximum main spring air pressure is 175 psi 12 bar Consult the website for further instructions if necessary INFINITE TRAVEL IT TRAVEL ADJUSTMENT Forks with IT adjustment can be set to anywhere in their travel range by depressing the bar mounted travel adjust lever compressing the fork to the desired travel then releasing the bar mounted lever These forks can be set anywhere within their travel range while maintaining a constant spring rate Changing travel while riding IT forks requires the rider to be proficient with the IT system as lengthening travel will require you to un weight the front end of the bike For sag and air pressure adjustments please see above recommendations STAGE 2 SPRING RATE ADJUSTMENT SYSTEM The Stage 2 spring rate adjustment system is featured on 2008 MINUTE COMP forks only Much more than just a preload the Stage 2 adjuster allows the ride
Download Pdf Manuals
Related Search
Related Contents
Descargar manual técnico "取扱説明書" Guide du lombricompostage En savoir plus RF Coaxial Power Standards Models 1510A and 2510A ピンチメーター SPR-642 CCpilot XM2 - Technical Manual チェーンリングの取り外し - Pioneer cyclesports modele gds50 Copyright © All rights reserved.
Failed to retrieve file