BATTERY CHARGER - Aldebaran Community
Contents
1. 3 We 3 tr g NN2. 3 1 URL www aldebaran com documentation URL www aldebaran com customer_care SoftBank Group 1 F 0
3. 3 0 m 1 2 kg 10 C 40 C y
4. JL ALDE410000A05 Pe D
5. LITHIUM ION BATTERY CHARGER ALDE410000A05 USER MANUAL SoftBank Group LEGEND A Switch B Power Connector C Fan D Battery Charger Connector E Air vent F Battery Charger G LED H Power Cable I Power Connector CAUTION e To prevent electric shock do not remove the cover Refer to qualified service personnel for servicing e Connect the battery charger to the Socket before connecting to the Robot Read this User Manual carefully before using the Battery Charger his product is covered by a warranty his battery charger is not intended for use by persons including children with reduced hysical sensory or mental capabilities or lack of experience and knowledge unless they ave been given supervision or instruction concerning use of the appliance by a person responsible for their safety his Battery Charger should be kept away from children under 14 he Battery Charger can only charge 29 2VDC Li ion batteries Ensure you use this Battery Charger to fully charge the Robot battery at least once every 3 months You can find this documentation at www aldebaran com documentation Also you can access Aldebaran Robotics Customer Support at www aldebaran com customer_care 1 Fully insert the Power Connector I into the Battery Charger F 2 Insert the Plug into the Socket and turn ON the Switch A The LED G sh
6. obstructed to avoid overheating Do not put the Battery Charger near heat sources e When using the Battery Charger ensure it can dissipate its own heat so do not put it ina confined area such as inside a carrying case e Protect the Battery Charger from water Do not pour liquid on the case e Verify that the available supply voltage is adequate for the Battery Charger e For safety and electromagnetic compatibility the Battery Charger must only be used with an earthed Socket Do not bypass earthing e Do not use the power cable or the Battery Charger cable if they are damaged e If there is smoke sparks or a smell coming from the Battery Charger unplug it immediately from the Supply Socket and contact Aldebaran Dealer or Service Department When using a power extension cable or a multiple socket adapter make sure it is grounded and has sufficient current rating You may use either one or the other to extend from the wall Socket but no more than one extension device at a time e Unplug using the plug rather than pulling on the cable itself a ALDEBARAN 4 SoftBank Group
7. 2 A G L 3 D OoSeOO gt FY B G BLES Sea i C G O D yi 3 6 ore 4 A H ean mm ALDEBARAN CHER BRO E Fry C 4 SoftBank Group F 6 AC 90 264 V DC 29 2 0 2 V 8 0 3 A om a X HEX BE 182 x 100x50mm
8. ould turn solid green 3 Insert and twist the Battery Charger Connector D into the Robot The LED G should flash yellow to indicate it is charging When the battery is fully charged e The LED G will turn solid green e The Fan C may stop after a period of time 4 When the battery is fully charged you may turn OFF the switch A and or you may disconnect the Power Cable H For further information please refer to the Robot documentation IMPORTANT NOTE Make sure the Air vent E and the Fan C are not obstructed and are free from dust GENERAL TECHNICAL SPECIFICATION CHARGER LED e Input Voltage Range 90 264 V AC e GREEN Output Voltage 29 2 0 2 V DC Standby mode e Output Current 8 0 3 A Battery Charger is not connected e Casing Dimension LxWxH 182 x 100 x 50 mm to the Robot e DC Cable Length 3 0 m Battery of the Robot is fully e Weight 1 2 kg charged e Charging Temperature 10 C 40 C e YELLOW flashing Material Finishing Aluminum The battery is charging e RED Error Follow the following precautions to avoid damage to persons and to the Battery Charger and its environment e Read the installation instructions contained in this Manual carefully and store it in a proper place Only use cables provided Preferably put the Battery Charger on a flat and level surface and ensure there is easy access to cables and plugs e Ensure all ventilation ports are not
Download Pdf Manuals
Related Search