Home

User Manual - Marketonline

Contents

1. umm s S ud Gas Station Sen Car Dealer SS gw Gen Car Repair Gen Car Rental ZS Repair Po s Gus Car Wash ee Facility Manage My POI By highlighting My POI then pressing OK on the Manage POI main screen you can manage the POI groups and items that you have previously created Sport Bel Shops 46 Note The group Unnamed only appears if you have previously saved a POI item without creating a new POI group for it Pressing OK will open a list of POIs saved in the highlighted group This list is similar to the list of POI results in Find POI The POIs are ordered based on their distance from your current position If GPS position is not available or you have disabled Lock to Position by moving the map the POIs will be ordered by their distance from the Cursor 2 m Find FOI Aem Eva 13 Rue Has Villeurbanne 69100 Pierre 17 Bue Raosernwald Paris 15 rme Amonckssemernt Parts 75015 im When the My POI groups are displayed you have the following options Show Hide similarly to built in POls you have the possibility to show or hide all POls of the selected category on the map Groups with a tick mark are displayed all other groups are hidden New you can create a new My POI group by using this button You need to select an icon aname and the maximum zoom level at which the POI is still visible on the map provided you let the POI group be displayed at all You do not necessarily n
2. This icon is displayed when NavNGo Limousine could not plan a route with all your road type preferences respected Sometimes it is impossible to find a suitable route near the start or the destination This icon warns you that NavNGo Limousine had to recommend a route that oes not match all your preferences given at the Route Parameters settings Q The recommended route contains areas only accessible to pedestrians The recommended route contains unpaved roads 35 The recommended route contains roads that require a permit or permission to enter e E uu any other piece of relevant but not categorised information e E page displayed when more than 5 warnings apply for the recommended route 4 5 3 Fit to screen Use this button to display an overview of the whole recommended route You will jump to the map screen with a 2D North up view so that you can check where the route takes you 4 5 4 Recalculate This menu point is only available if an active route exists and GPS position is present It brings up a menu with four options Using one of these functions you can modify the current route Recalculate This function repeats the route calculation based on the same settings as used to calculate previously You may consider using it when you travel on a road parallel to that recommended by the route In this case NavNGo Limousine may not recalculate the route for some time but you can force rec
3. Note If you try to access a favourite destination that you have not yet set up NavNGo Limousine will warn you about this 64 6 Settings NavNGo Limousine provides several settings in order to let you customise the functions of the program The Settings screen can be accessed from the Manage submenu of the Menu Some of its sub screens are accessible from other parts of the program 6 1 General settings These are the basic settings of NavNGo Limousine Sound Route Advanced Safety Camera Automatic Night Colors Warn When Speeding 6 1 1 Safety Camera NavNGo Limousine can warn you when you approach known speed or red light cameras previously uploaded or copied into the device or saved manually in the software You can save cameras using the Add Cam button in the Quick menu The types and parameters of speed cameras are explained here Page 51 In this section you can enable or disable the warning for known cameras and you can also fine tune the way NavNGo Limousine warns you when you approach one of these cameras If you turn on this switch NavNGo Limousine will open a new screen to let you customise the parameters used by the camera warning ie Speed Camera Settings Audible Warning d When Approaching P Visible Warning 65 Note Detecting the location of soeed cameras may be prohibited by law in certain countries or regions Be sure to check if it is legal to turn on this warning or not before
4. the final destination 4 5 1 3 Time Left This is an estimated value that can also be displayed in one of the Route data fields on the Cockpit screen as Time to destination It shows the time needed to reach the final destination of the route based on information available for the remaining 34 segments of the route The calculation cannot take into account traffic jams and other possible delays 4 5 1 4 Estimated Arrival This is an estimated value that can also be displayed in one of the Route data fields on the Cockpit screen as ETA to destination It shows the estimated arrival time at the final destination of the route based on information available for the remaining segments of the route The calculation cannot take into account traffic jams and other possible delays 4 5 2 Warning icons The 5 squares in the centre of the screen are normally grey Some of them turn red and show a graphical symbol in case warning s are attached to the planned route Highlight any of the icons and press OK to show its description A few samples of the available icons This icon shows that you need to pay toll on the recommended route This icon shows that the route contains motorways p e IL This icon shows that toll roads are included in the recommended route D This icon shows that you need to board a ferry along the recommended O r D A his icon shows that you need to pay for the ferry
5. Estimated Time of Arrival A frequently used expression in navigation It represents the time when you will reach your destination based upon calculations using the remaining part of the route and available information of the roads used This estimation can only be used as a general reference It will not be able to take into account your future speed or the traffic delays In NavNGo Limousine this value is shown as Estimated Arrival on the Route Information screen Page 35 ETE Estimated Time Enroute Another frequently used expression in navigation It represents the time needed to reach your destination based upon calculations using the remaining part of the route and available information of the roads used This estimation can be used only as a general reference It will not be able to take into account your future speed or the traffic delays In NavNGo Limousine this value is shown as Time left on the Route Information screen Page 34 GPS Abbreviation of Global Positioning System This system is operated by the DoD the Department of Defense of the Unites States Government It consists of 24 satellites orbiting Earth and several ground stations to keep the satellites in sync To calculate your position your GPS device uses the signals received from those GPS satellites that are currently visible at your location You can use this service free of charge Lock on Road This function of NavNGo Limousine will always keep the bl
6. POL Address 28 Rue Magenta Villeurbanne 69100 If you need to modify or delete an existing POI find it in the Find POI menu and have its details shown Use the Edit button to modify its details or Delete if you wish to cancel the POI View POT Fo CS dit Small Shop 29 Rue Magenta Villeurbanne 659100 42 4 6 2 6 Add Cam You can save the Cursor as a road safety camera First select the type of the camera Ma Safety Camera Camera Type Driving Direction Camera The camera type is highlighted Press it to change the type from fixed to mobile built in section or red light camera m NE Bo Be Bb B Now move right to set the direction of the monitored traffic and finally set the speed checked by the camera If you set the speed to No limit only the proximity will be announced speed warning will be disabled for this camera Safety Camera Ho Limit If you need to modify or delete a previously saved camera move the cursor near the camera on the map and this Add Cam button in the Quick menu will turn to Edit Cam and the details of that camera will be shown on this screen Use Delete if you wish to cancel the camera x LN Safety Camera Camera Type Driving Direction Camera 4 6 3 Manage tab This menu contains options to manage different settings in the program 43 Track Logs 6 Manage POI B 4 6 3 1 Route This button opens the Route Information screen descr
7. Page 30 will always show the current direction of the map NMEA National Marine Electronics Association This is the name of a communication protocol format This association issues standards for interfacing marine electronic devices One of their standards is NMEA 0183 that defines electrical signal requirements and a data transmission protocol for time and position data This is today s standard for not only marine but also all other GPS devices NavNGo Limousine as well as most GPS devices will default to using this protocol out of the box North up A kind of map orientation having the map rotated to have North toward the top of the screen POI Points Of Interest exact map locations of important points saved in a database together with their name category and subcategories e g Service Fuel Autogas address phone and fax number and other important information Use the versatile search system in NavNGo Limousine to find the appropriate POI near you your destination or any other given location on the map Page 62 You can also have your favourite places saved as My POI in NavNGo Limousine SIRF This is the name of a popular GPS chipset manufacturer Their specific communication protocol can be processed by NavNGo Limousine SIRF based GPS devices are also capable of NMEA communication the factory setting of communication protocol in NavNGo Limousine Track up A kind of map orientation when the map is rotated to look alw
8. and an information box will appear next to the Cursor The box contains the street address of the Cursor and if there are POIs close to the Cursor their names appear under the address This button will not function during normal navigation If you need information about your current position simply press any of the direction buttons and the Cursor with the information box appears immediately As an alternative to turn this information box on and off you can use the Popup Info button in the Quick menu Page 40 Find 1 Quick Fi Popup Info F Smart Zoom Night Mode 6 32D Map Add POT Add Cam 13 Note Maximum 4 of the closest POIs can be listed in the Point Information box Press 1 2 3or 4 on the numeric keypad to open the data of the respective POI in the list If more than 4 POIs are near only 3 POIs will be listed and the 4th in the list will be the label More Press 4 to open the list of all POls and road safety cameras near the Cursor 3 1 6 Mark sticking a drawing pin in the map The quickest way to record a reminder on the map is to press the Mark button Whenever your GPS position is available and Lock to Position Page 29 is enabled NavNGo Limousine will stick a drawing pin into the map at the current position If you have disabled Lock to Position by selecting a point on the map Page 24 the Pin will appear at the position of the Cursor Press this button again to remove the Pin
9. just move the map to disable Lock to Position Page 29 This will restore street names and POI icons immediately Now press the Follow button to reactivate Lock to Position 4 2 10 Road safety cameras Road safety cameras such as speed cameras and red light cameras are special POI types in NavNGo Limousine They are described in detail here Page 51 4 2 11 Elements of the Active Route NavNGo Limousine uses a multi destination routing system in which you have a start point your current location if GPS position is available a destination the line of the active leg of the route and optionally via points and inactive legs They are all shown on the map 4 2 11 1 The start point via points and the destination These points are represented by coloured flags A blue flag represents the start point white flags show the via points and a red flag marks the final destination 4 2 11 2 Animated turn guidance Animated arrows represent all route events other than the above mentioned special points These arrows show the direction in which you need to continue your journey 26 4 2 11 3 The active leg of the route The active leg is the section of the route you are currently driving If you have not added any Via points the whole route will be the active leg When Via points are present the active leg is the part leading from your location to the next via point The active section is displayed in green red It is always the
10. 1 3 2 Alternative speed limit If the speed limit of the current road segment equals or is above this limit the speed warning will use the alternative tolerance instead of the previous one Move the slider to its rightmost position to turn off the alternative speed warning Then the settings of the upper slider will determine the warning for all roads 6 1 3 3 Alternative speeding tolerance If the speed limit of the current road reaches the value set at Alternative speed limit this setting will replace the basic one set at the top of this screen The slider and the selector work exactly as the basic ones described here Page 67 Example To let you better understand how this feature works here is an example If you use the settings 10 km h 100 km h 5 NavNGo Limousine will warn you when driving at the following speeds Speed limit Warning at 40 km h 50 km h 740 km h 10 km h 60 km h 70 km h 260 km h 10 km h 90 km h 100 km h 290 km h 10 km h 100 km h 105 km h 2100 km h 5 120 km h 126 km h 2120 km h 5 Speed limit Warning at 160 km h 168 km h 160 km h 5 6 1 4 Safety Mode Safety Mode will prevent you from using the program functions above 10 km h 6 mph to keep your attention on the road This function is turned on by default Unless a passenger will be the only one to operate NavNGo Limousine we strongly encourage you not to turn the Safety Mode off When you disable Safety Mode NavNGo L
11. 4 2 4 Clear Data This button will delete all user data It is a reset to factory settings Using this button means you lose all your saved data and customised settings NavNGo Limousine will warn you about this 6 4 2 5 Reset Advanced Settings There are a multitude of Advanced settings in NavNGo Limousine Some changes may cause NavNGo Limousine to behave in an unsatisfying manner Use this button to restore the default settings 6 4 3 Map options You can set a few parameters determining the appearance of the maps in NavNGo Limousine Map Options Daylight colour profile Night colour profile Show Street Labels Textured Polygons 13 6 4 3 1 Daylight Night colour profile NavNGo Limousine comes with different colour schemes for both daylight and night use There is always one selected daytime scheme and one selected night time scheme NavNGo Limousine uses these when switching from day to night and back Push the appropriate button and select a new scheme from the list 6 4 3 2 Show Street Labels You can set whether or not to see the names of the streets and the POI icons on the map when driving Based on the current zoom and tilt levels street names are displayed either aligned with the street or on signposts stuck into the streets Page 22 If you switch these signs on it will be easier to recognise your location on the map if you turn them off it will be easier to see the road geometry Note You can o
12. All e de la Charmeraie Boulevard de la Malibran D361 diti dom k 115090 i Avenue du G n ral de Gaulle D350 4 Avenue d la R publique D51 1st Dm 3ZOm e Avenue du G n ral Leclerc D35 e Avenue de l H tel de Ville ss on riaht Avenue du G n ral de Gaulle D350 x 3 Show Use this button to see the highlighted list item on the map This will help you identify route events in the list Avoid Use this button to show a list of possibilities for modifying the route They let you recalculate the route avoiding the highlighted event and sometimes also some of the Subsequent ones Ka Avold 1 Manoeuvre E e Manoeuvre this option avoids the highlighted action For example if you find a turn too difficult during rush hour traffic NavNGo Limousine will recalculate the route excluding that turn If the next street is important in the route it is likely that NavNGo Limousine will replace the turn with several easier ones to get to the same street e Road when you exclude a road NavNGo Limousine will calculate a route that does not use that road It is useful when you anticipate a traffic jam in a street used in your route or a roadblock is announced on the radio and you find that road in your Itinerary e Distances you can also find some distance buttons in this list They are similar to the ones in the Bypass list of the Recalculate menu Page 36 but these can also be used for distant parts of th
13. If you wish to remove a previously set Pin move the Cursor near to it and press the Mark button If the Cursor is close enough this will remove the Pin instead of placing a new one 3 1 7 Pins show next pin Press this button and the Cursor will jump to the next Pin in the list Pressing the button again will cycle through all the saved Pins This can be useful if you attempt to find one of your Pins or if you wish to remove some of them 3 1 8 Mute all sounds By pressing the Volume Down button you can quickly mute all sounds of the Limousine This will not modify the volume level and the enabled or disabled status of the voice guidance or the key sounds all to be set on the Sound Settings screen just mutes the sound output Press Volume Up to re enable sounds You can check whether sounds are muted or not by the help of the sound muting icon shown on the map screen X 14 Note Sound can be muted in Sound settings Page 68 too There you have a Master slider That you can use to fully turn down the volume of the device When you do so the program becomes muted 3 1 9 Follow This button has no effect during normal navigation If you have moved or scaled the map a special icon an open hand appears on the map screen and pressing this button will re enable normal navigation Lock to Position and Smart Zoom V 3 1 10 Volume up and down This control will adjust the master volume of NavNGo Limousine
14. Press and hold the upper part to make navigation and key sounds louder or press and hold the lower part to turn them down When you use this control the current master volume level will be displayed in the centre of the screen for a few seconds If you press the Volume Down button momentarily the sound output will be muted oee also Page 14 3 1 11 The direction buttons and OK Push the left right up or down buttons to move the Cursor on the map Press OK to open the Cursor menu with route planning options In lists the direction buttons move the highlight in the respective direction while pressing OK makes the selection On menu and settings screens the directions buttons move among the displayed functions Pressing OK will start the highlighted function 3 1 12 North You can view the map screen in three different presentation modes This button will cycle through them in the following order The current presentation mode is displayed by an arrow in the top right corner of the map screen The usual map orientation for navigation is Track up It means NavNGo Limousine rotates the map during navigation to always face the direction of your travel In this mode an arrow compass points towards North A Push the North button to switch to North up mode Now the map is fixed to keep facing North The icon changes to show the new rotation mode N A Push the button again to enter Overview mode This mode looks similar to the N
15. Sound settings at the given maximum speed Turn on the Dynamic Volume switch to enable this feature This will also open the screen where you can set the minimum and maximum speeds Dynamic Volume Minimum speed 60 km h Maximum speed 130 km h wc 6 3 Route settings This is a very important page Settings here determine how routes will be calculated This screen is directly accessible from the Route Information screen Page 33 General Advanced Motorways Ferri needed Ferries Cro ssbun des Vehicle 4 Route d Economical P 6 3 1 Road types to include exclude To let the route fit your needs you can set which road types are to be considered for or to be excluded from the route if possible Note Excluding a route is a preference It does not necessarily mean total prohibition If your destination can only be accessed using some of the excluded road types NavNGo Limousine will use them but only as much as necessary In this case a warning icon will be shown on the Route Information screen Page 33 and the road not matching your preference will be displayed in alternate colour on the map 6 3 1 1 Unpaved Roads Unpaved roads are excluded by default as they can be in a bad condition and you usually cannot reach the speed limit on them 6 3 1 2 Motorways When driving a slow car or towing another vehicle you may prefer not to take motorways 6 3 1 3 Ferries The accessibility of
16. a function can only have two values mainly Enabled and Disabled a switch is used Unlike with list selectors the horizontal line contains the name of the function and not the current status There is a lamp on the left to show whether the function is active or not 18 When the lamp is dark the function is not selected When it is lit the function is enabled Highlight the desired switch and push OK to toggle between the enabled and disabled status 3 2 5 Virtual keypads NavNGo Limousine is designed in a way that you only need to enter letters or numbers when it is inevitable In these cases a numeric keypad is displayed This keypad can also be used as an alphanumeric keypad such as if you were writing an SMS message on a mobile phone The operation of the keypad is described here Page 16 London United Kingdem Whitehall V estm nster London Strand SWLA Z WCIN 5 En imus Close ERA D Li mno Whitehall Court a westminster SWIA 2 pars tuv wxyz Whitehall Crescent ER KR Whitehall 123 rn ud EM LB 3 19 4 Discovering the program through the screens The best way to discover NavNGo Limousine is to explore each screen in detail and to find out how to move from one to another Read this chapter for a guided tour The program starts with the root of the screen hierarchy the map screen Cockpit All other screens can be accessed from here 4 1 About screen Press the O zero button when
17. appears on the screen to visualise the distance when you get closer than 300 meters 1000 feet to the next turn and it remains visible till you reach the turn This field is displayed only when navigating a route 4 4 Cursor menu The Cursor is the selected point on the map marked by a red dot and radiating red circles around it or the current GPS position when it is available and Lock to Position is enabled The Cursor menu can only be activated when the red dot appears Pressing OK opens it to give you the list of possible functions you can use the Cursor for 32 The content of the Cursor menu is slightly different if there is an active route already planned or if the cursor is near to an existing route point You have the following options Start use the Cursor as the departure point for your route This menu point is available only when there is no active route If it is available the departure point of the route is the current GPS position Route To use the Cursor as the destination of your route This button is to start a new route The previous route if it exists will be deleted and replaced If a multi point route is active NavNGo Limousine will ask you whether you really want to delete it together with all its via points Add Via by inserting the selected map point as a via you instruct NavNGo Limousine to cross this location before the destination of the route This is the way to build a multi point ro
18. doing so 6 1 1 1 Audible Warning You can disable the audible warning have a simple warning when you are warned only if you exceed the speed limit when approaching a camera or a complex sound with repeated beeps as you approach the camera In case of section control cameras you will also hear these beeps while you are between the two cameras these cameras work in pairs You are warned well in advance The distance NavNGo Limousine starts warning you before reaching the camera depends on your speed The higher the speed the earlier the warning starts 6 1 1 2 Visible Warning Besides this NavNGo Limousine can pop up a visual warning with only the symbol of the camera on the Cockpit screen or you can ask for details as described below Approaching a fixed or built in camera you will see the speed limit checked by the camera and the remaining distance to reach the area monitored by the camera With mobile cameras you can only see the distance from the measured area as there is no speed limit set When approaching the first of section control camera pairs you will see the same data as with a fixed camera speed limit and distance Then while being between the two cameras your frequently updated average speed is displayed below the speed limit 6 1 2 Automatic Night Colours Using the automatic night mode NavNGo Limousine will change between the daylight and night colour schemes a few minutes before sunrise and a few minu
19. have complete freedom to go wherever you wish Just select your destination and go You can access all functions of the program by using buttons on the remote control unit With the help of these buttons you can travel through all the screens of the program Most of the screens especially menu functions and settings can be accessed from several other screens minimising the number of actions needed to reach the desired function On menu and setting screens if a screen button has a hardware button equivalent on the remote control unit the symbol of the hardware button is displayed beside the screen button in a small square 3 Operating NavNGo Limousine Controls NavNGo Limousine is designed for easy operation All controls are available on the remote control unit 3 1 The remote control unit The remote control unit contains all the buttons you need to operate the software 10 No 10 11 12 13 14 15 16 17 18 19 20 Main function Other functions Starts the function in the top left corner of menu Opens closes the Menu and setting screens Starts the function in the top right corner of menu Opens the Route Information screen and setting screens Moves the cursor up forward on maps Moves the highlight up in lists and menus Moves the highlight left in lists and menus clears Moves the cursor left on maps the last entered letter figure when entering text or numbers Moves the cursor right on m
20. limit for the current street and some more route data if you are navigating e g next street in your route distance to travel type of the next route event This screen is typically used in 3D Track up mode Cockpit screen contents Z 2 Display Turn preview Indicates that Lock to Position and or Smart Zoom are inactive Selected map point Cursor Map orientation and Overview GPS position quality Sounds are muted Track Log recording or playback indicator Current street Oo Oo N O C A O N Travel and Route data O Distance to next turn 28 No Display 11 Next street Next settlement KKK 12 Approaching next turn Contents differ when a route is active Appears only when a route is active Appears only when a route is active and the next turn is near 4 3 1 Turn preview No 1 On the Cockpit screen this field shows a graphic illustration of the next manoeuvre For example when you approach a turn an arrow will show whether it is a slight normal or sharp turn When showing a roundabout the number of the exit is also given in the picture 4 3 2 Follow mode lock to GPS position and heading No 2 This semi transparent icon is displayed if GPS position is available and the map has been moved It also appears when you scale the map while Smart Zoom is enabled Normally NavNGo Limousine positions the map to keep the GPS position visible somewhere on the map when Nort
21. most conspicuous part of the map even when in the background of a 3D map view The line of the route is displayed on the driving side of the road for two way and on the axis in case of one way streets When the map is zoomed in and the line is wide enough small arrows show the direction of the route This can be useful if you preview the route before starting the journey or when entering a complex junction 4 2 11 4 Inactive legs of the route Future sections of a route are inactive They are also shown on the map with the same colour but a darker tint than the active one An inactive route section becomes active as soon as you reach its starting Via point 4 2 11 5 Roads in the route excluded by your preferences Although you can choose whether to include or avoid some road types in Route parameter settings Page 69 sometimes they are impossible to avoid near the starting point via points or the destination If so NavNGo Limousine will display those segments of the route with an alternate colour 2 SET Champs Elys es Y Rue de Berri X Wades des Champs Elys es Galerie du diudge 4 3 Screen with map Cockpit Having explained the contents of the map the description of the other parts of the map screen follows The Cockpit screen is for driving purposes Besides showing the map it contains some additional travel information if you are just cruising speed current street you are driving in speed
22. of the map That is a way of representing the map on the screen independently from the GPS reception Accuracy The difference between your real position and the one given by the GPS device is affected by several different factors The GPS is capable of providing a guess of its current error based on the number of satellites it can receive a signal from and their position in the sky This information is shown in NavNGo Limousine on the GPS Data screen Page 49 Use it as a general reference only Note that several other factors affect the real accuracy some of which the GPS is incapable of estimating e g signal delay in the ionosphere reflecting objects near the GPS device etc Active route A route is an itinerary planned to reach your chosen destinations A route is active when it is used for navigation NavNGo Limousine has only one route at a time and it is always active until you delete it reach the final destination or exit NavNGo Limousine When there is more than one destination to reach the route is cut into different legs from one via point to another Only one of these legs can be active at one particular time The rest of them are unused and shown in a different colour on the map Automatic route planning Autorouting You only need to set up your destination and based on its map the software will automatically figure out which roads you need to take and the turns you need to make to get there NavNGo Limousine will let
23. otherwise opened from the Manage menu Page 43 4 5 6 Itinerary This function opens the Itinerary route event list of the active route The Itinerary has three different display modes and two functions Display modes Display modes are different only in the number of events displayed in the list List items are always shown with all information available including pictograms of the needed action and distance of the event from the previous list item The Itinerary is live and constantly updated when navigating a route The list item coming next in navigation is the highlighted one until you highlight another one with the direction buttons After that the highlight remains on the item you have selected e Detailed Instructions this is the list displayed when Itinerary is opened It is the list of events in full detail All significant junctions are shown in the list even ones to be passed e Instructions by using the Mode button once you will see the list of events that need your attention i e the list of manoeuvres during the route These are the events shown in the Turn preview field and announced by the voice instructions e Route summary using the Mode button again will show an overview of the route that contains only the significant roads and intersections l Detailed Instructions m Route Summary ER ozoir la Ferri amp re ep 34km 4 8m Avenue du Mar chal Foch D21 j i Ozoir la Ferri re t e 2 Tkm t t pass on left
24. remote control unit 40 4 6 2 2 Smart Zoom switch This button turns Smart Zoom on and off 4 6 2 3 Night Mode switch This button switches between the daylight and night colour schemes of NavNGo Limousine Turn on or off the night colours manually to override the automatic colour scheme switching T ANEU m Ni Willa Cui mot Avent Avenue Mac Mahon e 4 z um Avenue che Wagram Note Using this option turns off the Automatic Night Colours feature You need to re enable it at the General settings screen Page 65 to have the colours change automatically again 4 6 2 4 3D Map switch When the light is on the map shows a perspective view When the light is off the map is displayed in a conventional top down view Map view modes are described here Page 21 4 6 2 5 Add POI You can save the Cursor as a POI First enter a name for the new POI 41 Text Input m Enter POI Name gt abc EM ER hi jkl mno me EB ER cn Ee g EG Then its details will be shown Edit My POI Group POL Name Small Shop Icon POI Address 29 Rue Magenta Villeurbanne 69100 Use the buttons to set the group and icon for the POI or modify its name if necessary o 0 JL Finally all details will be entered The POI has already been created so you only need to exit the screen Edit My POI Gro ip mg POL Mame Small Shop Toon o
25. temporary ferries is not necessarily included in the map data Furthermore you may need to pay fare so you may consider disabling them from the preset enabled status 6 3 1 4 Cross border planning By default NavNGo Limousine plans routes using the border crossing points However if you live near the border you can disable border crossing with this switch to remain within one country 6 3 1 5 U turns Although displayed amongst road types this is a type of action Most drivers prefer to replace them with a few normal left and or right turns in the next few junctions so it is disabled by default Turning back on dual carriageways is not considered as a u turn Note Via points are handled as stopovers with regards to u turns It means disabling u turns on this page will avoid u turns during the entire route if possible but when reaching a via point the following part of the route may be planned starting in the opposite direction 6 3 1 6 Permit needed To use some roads or enter some areas you may need special permit or permission from the owners These roads are excluded from your routes by default Use this switch if your vehicle is authorised to enter 6 3 1 7 Toll Roads Toll roads are included in your routes by default If you wish to travel more to avoid paying a toll disabling them will make NavNGo Limousine plan the best toll free route for you 6 3 1 8 Carpool lanes for the USA map only You can instruct Nav
26. the map is shown to open this screen The About screen is not used in normal navigation It is there to inform you about the map licenses you have the creators of NavNGo Limousine and the legal aspects of using the program Nav N GO Abt avnge ation wystem 4 2 The map The most important and most frequently used screen of NavNGo Limousine is the screen with the map Cockpit screen The elements of the map are described here For the controls and special functions of the map screen see Page 28 The current version of NavNGo Limousine is primarily intended for land navigation That is why the map in NavNGo Limousine looks similar to paper roadmaps when using daytime colours and 2D map mode However NavNGo Limousine provides much more than regular paper maps can The look and the contents can be changed 20 4 2 1 2D and 3D map views Besides the classical top down view of the map called 2D mode there is a perspective view 3D mode that gives a view similar to that seen through the windscreen with the possibility to see far ahead It is easy to change between 2D and 3D modes Use the switch in the Quick menu Page 41 to quickly switch between the two modes Note 3D view is only useful for navigation As you zoom out the view angle will automatically be raised Finally 2D view will be reached When you zoom back in 3D view will gradually return 4 2 2 Zoom levels NavNGo Limousine uses high quality vect
27. way you also save the coordinates with the Pin for later reference If you do not need the coordinates later just select the point and start Find Coordinates Page 61 4 2 9 Visible POIs Points of Interest NavNGo Limousine comes with thousands of built in POls and you can create your own POI database as well Having all of them displayed on the map would make the map too crowded To avoid this NavNGo Limousine lets you select which POIs to show and which ones to hide Page 45 using their categories and subcategories POIs are represented by icons on the map For a built in POI it is the icon of the subcategory of the actual POI For points you create it is the icon you had chosen when you created the POI it can be changed later These icons are large enough to recognise the symbol and semi transparent so as not to cover the streets and junctions behind them When the map is zoomed out the icons are not shown As you zoom in small dots appear at the locations of visible POls Zooming in further makes the full icons appear 25 If two points are too close to each other so that icons overlap a multi POI icon is shown instead of individual ones Zoom in more to see them separately Should the two POIs have the same icon this icon will be displayed instead of the multi POl icon Note When navigating POI icons can be disabled together with street names Page 4 If you still need this information during your journey
28. you select multiple destinations and customise some important routing parameters Page 69 Automatic route recalculation NavNGo Limousine recalculates your route if you deviate from it When you miss a turn or avoid a roadblock NavNGo Limousine waits 80 for a few seconds to be sure you do not follow the route any more then recalculates the route based upon your new position and heading Automatic day night colours Based on the time and position given by the GPS device NavNGo Limousine is able to calculate when the sun rises and sets at your current location on this particular day Using that information NavNGo Limousine can change between the day and the night colour schemes a few minutes before sunrise and a few minutes after sunset Page 66 As additional information to help your orientation the sun is shown in the sky when you display the map in 3D mode with a low viewing angle and the sun is near the horizon Elevation When the GPS receiver can see at least four GPS satellites it can determine its current position in three dimensions In this case the elevation is calculated together with the latitude longitude position Note that some older GPS units may provide incorrect elevation data because they use a simple ellipsoidal earth model rather than a database that contains local sea levels You should also be aware that the elevation value is generally less accurate by at least a factor of 2 than the horizontal position ETA
29. GPS position is available KE yellow means 2D reception A GPS position has been acquired NavNGo Limousine is ready for navigation but the GPS is using enough satellites for calculating the horizontal position only Elevation data is not provided and the position error may be significant e green means 3D reception The GPS receiver has enough satellites to calculate altitude Position is generally correct yet it can still be inaccurate due to different environmental factors NavNGo Limousine is ready for navigation Time synchronization You have a button that leads to a new screen where you can synchronize the clock of your Limousine to the very accurate time provided by the connected GPS GPS 7 06 16 PDA 14 58 05 hour minute a Turn on the Auto Correction switch to let NavNGo Limousine frequently check and correct the Limousine time with the GPS time 50 Below that button you will see the current values of the GPS and the Limousine clocks You can check here whether any correction is needed Use the arrow button to manually synchronize the time Before doing so be sure you have set the correct time zone in Advanced settings Page 76 Below the Limousine time you have hour and minute controls to manually correct the time with or without a valid GPS time GPS configuration Detect and Config Two buttons on this screen open the automatic Detect and the manual Config GPS Setup screens For information on
30. NGo Limousine to use carpool lanes when planning routes These lanes are currently available in the USA only 6 3 2 Vehicle You can set the type of the vehicle that you will use to navigate the route Based upon this setting some of the road types will be excluded from the route or some of the restrictions may not be taken into account e g emergency vehicles have no restrictions Furthermore when Bus or Lorry is chosen the program assumes that high speeds cannot be achieved and this information is taken into account when calculating the route the estimated time enroute ETE and the estimated time of arrival ETA Available values e Car e Taxi e Bus e Lorry e Emergency 6 3 3 Route Here you can choose from three different route types 6 3 3 1 Short Choosing Short will result in a route that has the smallest total distance of all possible routes between the given points This is usually preferred by slow vehicles 6 3 3 2 Fast Choosing Fast will result in the quickest possible route given that you can travel at or near the speed limits on all included roads This is usually preferred for fast and normal cars 6 3 3 3 Economical This setting is a wise combination of the previous two Although basically going for the fastest solution if there is another route taking a bit more time but a lot less distance compared to the fastest one NavNGo Limousine will choose this one instead to save fuel 6 4 Advanced s
31. Speeding telerarice ENEE EE AE 67 6 1 3 2 Alternative speed BR Un EE 67 6 1 3 3 Alternative speeding tolerance n nannanannannnnnnnnnnnnnnnnrnnnnrnennnnnne 67 Jum ZEE i Auoo gt 68 02 SOUMGSCUING S sueuiciddanunccdpnoded dede e qncmodedadenieded iictcecaddcucaeat dta nedcd onc ao ded ond edes 68 6 2 1 Mastersound eegener 68 0 22 Volce GUIDANCE NERT 68 6 2 3 Key sound VOLU T8 225 95 8 91 955 955 8 99 5 9 09 4 co Ma orden e andes idc anies deu 68 6 2 4 DYNAINIG e UE lun ERE UU TL 69 0 9 ROULE le 69 6 3 1 Road types to include exclude n nnannanoannnnnnnnnenrnrrrnnnnrrnrnrrnrrnrrnrenne 69 6 3 1 1 LTT A Rer e oceiciti tero te ERN Ea fol Prado E Eo pa ote toM cR 69 6 3 1 2 WIQUOIWAY c 70 6 3 1 3 SEENEN 70 6 3 1 4 Cross border planning eege 70 6 3 1 5 AUR RITE TTL EE 70 6 3 1 6 PEMMILMESCGESG eg e ege ege gege edd 70 6 3 1 7 FOROG aired E EE 70 6 3 1 8 Carpool lanes for the USA map only eens 70 0392 VENCE E 71 6 3 3 pio cm EU 71 6 3 3 1 ODIO ee ee ee 71 cO ON 6 3 3 2 xri 71 6 3 3 3 Seege eri 11 S MEE ANIC CCl CIN Saa 11 6 4 1 elei DIU SCO TING EROR 72 6 4 2 User data Man AGS nn E 72 6 4 2 1 BACKUP DAL m E 72 6 4 2 2 PROSIONG Bri er 73 6 4 2 3 REMOVE FINS oee UP 13 6 4 2 4 era O 73 6 4 2 5 Reset Advanced Settings ccccccccsscssecceeeceeeceeeeeeseeseeeseeeeaees 73 6 4 3 M
32. You can search for both the type and the name of a road If you have the same name appear as Street Avenue Boulevard Road Place and Court you can get the result faster by giving the first letter of this too For example searching for Pi A will result in Pine Avenue skipping all Pine Streets and Pine Roads Tip Should the name of the street be a prefix for several other street names just enter the whole name and the exact match will be the first in the list This way you can easily find even very short street names As soon as you select a street you are automatically taken to the House Number Input screen Page 59 5 2 1 3 Selecting a house number or the midpoint of the street Once the country the city and the street name are selected you are asked to give the house number using the numeric keypad The range of available house numbers for the chosen street is shown in the input field before you begin entering the figures r 1 201 ww oT y 0 muy n Enter the number then press OK and NavNGo Limousine will show you the selected location on the map 59 Note House numbers may not be available on the map of your region Ask your local dealer for details Tip If you do not know the house number just press OK and the midpoint of the street will be used as the selected location 5 2 1 4 How to select an intersection instead of a house number If you do not know the house number or it is easier to pinp
33. _Pont de Tolbiac Place Leonards Ruesl ose Rug Py irma Lewyi Jr E R ue mg DI ce In y Area at beirateen 14 39 TELE AUX NAVI MAP RADIO co ad A Pr ke DN i T 3 1 Ae we A3 ai PD E Lr Lu Si Guser Manual NavNGo Limousine Navigation software for Limousine UK English July 2007 2 1 a Nav N GO Copyright note The product and the information contained herein may be changed at any time without prior notification This manual nor any parts thereof may not be reproduced or transmitted in any form either electronically or mechanically including photocopying and recording without the express written consent of Nav N Go Ltd Whereis map data is 2007 Telstra Corporation Limited and its licensors Data Source 2007 Tele Atlas N V Austria BEV GZ 1368 2003 Denmark DAV France IGN France Ordnance Survey data with permission of Her Majesty s Stationery Office Great Britain Crown Copyright ltaly Geonext DeAgostini Rr Ordnance Survey of Northern Ireland Ireland N Norwegian Mapping Authority Public Roads Administration orway Mapsolutions Switzerland Swisstopo The Topografische ondergrond Netherlands Copyright dienst voor het kadaster en de openbare registers Apeldorn All rights reserved Thank you for choosing NavNGo Limousine as your door to door in car navigator Read the Quick Start Guide first and start using NavNGo L
34. a ke 52 4 7 1 3 iB Nei iz TU 52 4 7 1 4 SECON COMMON CaMMCl aS aaron anaes onsets D OD D 52 4 1 1 5 EE o9 4 7 2 Gontrolled traffic directions cvi ei E e UR vE VEI VE YEA Vo EYE VV VETERE E cU o3 4 7 3 Speed limit een EN 53 4 4 Add a new camera or edit an existing one o4 4 5 Change the settings of the camera warmmmg 54 D Bliss eee c d eer err au s CS 55 5 1 SETECHON USING the e e 55 OZ Usno ine FING CIE 55 5 2 1 Find an Address Street Intersection or City 55 0 2 1 1 Selecting the city state and country to search in 56 5 2 1 2 Selecting a street or the centre of the settlement 58 Did bid Selecting a house number or the midpoint of the street 59 5 2 1 4 How to select an intersection instead of a house number 60 5 2 1 5 An example for a full address search 60 0 2 2 FINO FAIS LORY EEN 61 9 2 9 mine Bree rali Ale ERI E E D E ETE 61 0 2 4 lie O e 62 9 2 9 Find one of the Favourites HomeiWork eese 64 SM dgio Em 65 O21 General SetUnds ssec ostii eoo toos otiosus T 65 6 1 1 erc TE T T cR 65 6 1 1 1 Audible Warning cccccceccecceeeceeceecceecuecaeeceesueesuesaesaeeseeseeeseees 66 6 1 1 2 VISIDIC VV ue TERR US 66 6 1 2 Automatic Night Colours cc cccccccceceseeeeeete esse eeseeeseeeseeeseeeeeeseeees 66 6 1 3 Warn When Gpoeedumg 66 6 1 3 1
35. ack log recording A new line appears in the list and GPS position data will be saved until you stop the recording or exit NavNGo Limousine A red icon Page 30 is shown on the map screens to let you know that a recording is in progress e Stop recording if recording is in progress this button stops it e Info this button opens a screen that shows the track log details and lets you e change the name of the track log Rename button e change the colour of the track log Colour on the map selector e have it displayed on the map Fit to screen button e or export the data to the SD card in GPX format Export button Track Information Paris By Night With Taxi Track log start 2005 11 02 7 08 05 Track log end 2005 11 02 7 10 20 Track log duration 2m 155 Average speed 32 98 km h Total distance 1237 m e Replay push this button to see a simulation of the saved track log on the map A green icon Page 30 will appear on the map screens to let you know it is not a real time situation but a simulation based on a saved track log e Delete you can delete a track log if itis not needed any more NavNGo Limousine will ask you to confirm this action 4 6 3 3 Manage POI Points of Interest Here you can set all the parameters of POIs that you have created and the visibility of the built in POIs that come with the map Manage built in POI visibility The maps in NavNGo Limousine come with a huge number of POIs Displaying al
36. aim the return of the increase of assets due to the breach 9 1 5 claim ceasing the breaching situation the restitution of the state before the breach to the expense of the person in breach and may claim the destruction of instruments and materials used for the breach and that of the objects created by the breach 9 1 6 claim damages 9 2 The Licensor hereby also informs the User that the breach of copyrights and related rights is a crime according to Act IV of 1978 on the Criminal Code which may draw as a sanction a sentence of two years in prison in basic cases and up to eight years in prison in qualified cases 9 3 For disputes arising from present Agreement the parties hereby agree on the exclusive competence of depending on value and title disputed either the Central Court of Budapest Districts Pesti K zponti Ker leti B r s g or the Municipal Court of Budapest F v rosi B r s g 96
37. alculation here Drop Next Via Point Delete Route You can modify the route to skip the next via point if you decide it is no longer needed For example you may have added the via point only to influence the route but you do not want to actually reach it or you have already almost reached it and NavNGo Limousine still keeps on navigating towards that point When there are no via points left only the destination the name of this button turns to Delete Route and it cancels the navigation Bypass When you run into a traffic jam or roadblock you may want to have NavNGo Limousine calculate a route that departs the original route as soon as it can You will need to select the minimum distance along the original route where your new route is allowed to rejoin the original route Select the one you feel appropriate for the traffic difficulty you face 36 Note This function is to give you an alternative for the next section of the recommended route To change later parts of the route or to avoid specific streets or turns use the Avoid function in Itinerary instead Page 37 Note When you use this feature NavNGo Limousine will keep on excluding the same part of the map from later routes until you manually delete the route Page 39 or restart NavNGo Limousine Cancel This option returns directly to the map screen without recalculating the active route 4 5 5 Settings This button opens the Route settings screen Page 69
38. an address to be searched around or a settlement to search in The centre of this settlement will be used as the reference point e History the reference for the search can be selected from the History list e Coordinate you can specify a latitude longitude pair to be the centre of the search e Current GPS position the search will be carried out around the current location given by the GPS if it is available If no GPS position is available the last known GPS position grey arrow on the map will be used e Cursor the search will be carried out around the previously selected map point e Destination the search will be carried out around the destination of your current route Note The default reference point for POI search is the current GPS position if it is available or the Cursor when there is no reliable GPS position Once you have set the reference point you have the following options on the Find POI screen e Find in POI subgroups highlight one of the POI groups by using the direction buttons then press OK to see the list of subgroups Using the same action you can move deeper into subgroups e Search by name among the POls of that level using the Search button will bring up a text input screen to let you narrow the list of POls If you use Search in the list of subgroups you will only search in the group you are already in e See all POIs of the current group in a list using the All button opens the list o
39. ap ODUON RETI N 13 6 4 3 1 Daylight Night colour profile ccccccecceecceeeceeeseeeseeeeeeeeeeeeeees 14 6 4 3 2 SNOW Sheet WADE Ee 14 6 4 3 3 Textured POIyGONS htec dens ta ctuma iade tasa dens tw oma ada 14 044 SMa ZOOM SeN EE 14 6 4 4 1 IMAL ZOO RR CET DU UU D T 15 6 4 4 2 Enable Overview mode 15 6 4 5 WANGQUAGE SEUINGS crave wosetavewenevabe eesn ope ou Ware sauiebrecawstdsecexaybracencel ETETA 15 6 4 5 1 PFOGFaM lan QUAG Cita stator ahataen alata altoeanstataenaatntauneaiataunnatatatot sy 15 6 4 5 2 OCS aen ERU TETTE UM 15 6 4 5 3 Spec eae 76 6 4 5 4 oet Date amp Time Formateret EEN 76 040 Se ln Ee EE 76 69 Man al GPS COnTMOGUPATON iccsc05 scene ba icit earen r Eea Er E a i 76 6 5 1 muss eee eer s ee ee eee T 6 5 2 pog c T 6 5 3 Ste Ng Mettre T Troubleshooting goude 78 GIOSSANY e 80 End User License Agreement EE 83 1 Warnings and safety information NavNGo Limousine is a navigation system that helps you find your way to your selected destination It will determine your exact location with the help of an attached GPS device The position information obtained from the GPS receiver will not be transmitted anywhere so others will not be able to track you by the help of this program lf you are the driver of the vehicle we recommend that you operate NavNGo Limousine before beginning your journe
40. ap database belonging thereto 4 3 Any form of display storage coding including printed electronic or graphic display storage source or object code of the software product or any other as yet indefinable form of display storage or coding or any medium thereof shall be deemed as part of the software product 4 4 Error corrections additions updates used by the User as defined in Section 2 following the conclusion of present contract shall also be deemed as part of the software product 5 Owner of copyrights 5 1 The Licensor unless contractual or legal regulations state otherwise is the exclusive owner of all material copyrights vested in the software product 5 2 Copyrights extend to the whole software product and its parts separately as well 5 3 The owner s of the copyrights of the map database forming part of the software product is are natural person s or corporate entity es as listed in the appendix to present Agreement or in the About Map menu item of the operating computer program hereinafter referred to as Database Owner Licensor hereby states that Licensor has obtained sufficient usage and representation rights from the Database Owner in order to utilise and give into further utilisation the map database as set forth in present Agreement 5 4 In conclusion and execution of present Agreement the Database Owner is represented by Licensor in relations to the User 9 9 By concluding present Agre
41. aps Moves the highlight right in lists and menus Moves the cursor down backward on maps Moves the highlight down in lists and menus Makes selection in lists initiates the highlighted Opens the Cursor menu function on menu and setting screens Starts the function in the bottom left corner of Zooms out maps menu and setting screens Starts the function in the bottom right corner of Zooms in maps menu and setting screens Jumps back to the GPS position and enables Smart Zoom if the map has been moved or scaled Opens closes the Point Information box of the Cursor Cycles among Track up North up and Overview map modes Unmutes sound Press and hold to turn volume up Sticks a drawing pin in the map at the Cursor Cycles through drawing pins already stuck in the map Mutes all sound Press and hold to turn volume down Enters letters or numbers on keyboard screens Switches between alphabetic and numeric keyboards Press and hold to turn the unit power on off Enters O zero on numeric and space on alphabetic keyboards Opens the About screen 3 1 1 Power on off Use this button to turn the power of the Limousine on or off any time To turn off the device you need to press and hold the button for 2 seconds 11 When you turn the device back on NavNGo Limousine will continue the navigation as soon as the attached GPS determines the location again While the device is switched off the GPS will not work no position
42. ays in the direction of your heading Via point Routes in NavNGo Limousine can have several as many as you want different destinations to reach in a specific order All these points except the final destination are called via points as the route goes via through them Should your via point serve as a stopover navigation continues automatically as you depart Navigation will resume even if you turn the power off and on Zoom In and Out The Zoom function is used to change the scale of the map Use Zoom In to scale down the map to see less of it but in more detail and use Zoom Out to scale the map up to have a broader view of that part of the map with fewer details See also Page 12 82 9 End User License Agreement 1 The contracting parties 1 1 Contracting parties to present Agreement are on the one hand Nav N Go Kft 51 Gabor Aron H 1026 Budapest Hungary Hungarian reg no 03 09 111944 as Licensor and the legal user as defined in Section 2 of the object of present Agreement according to Section 4 hereinafter referred to as User on the other hand hereinafter jointly referred to as Parties 2 Conclusion of the Agreement 2 1 The Parties hereby acknowledge that present Agreement shall be concluded by implicit conduct of the Parties without a signature of the Parties 2 2 The User hereby acknowledges that following the lawful acquisition of the software product constituting the object of present Agreeme
43. d 6 4 4 2 Enable Overview mode You can turn the automatic Overview mode on or off and configure how it is triggered when the next turn is at a distance The Route event distance will determine when NavNGo Limousine switches to the Overview or back to the Navigation view If the distance from the next route event is more than the value set here the map view automatically switches to Overview mode When the distance falls below this value the view automatically switches back to Track up The Overview zoom level will determine the fixed zoom level of the map both when automatically or manually selected by North button Page 15 You can change the scale of the map manually any time the Hand icon will not be displayed but when you enter the Overview mode again the zoom level will be reset to this value Note when this automatic feature is disabled you can still enable the Overview mode manually with the North button 6 4 5 Language settings Here you can set the languages measurement units and date and time formats used by NavNGo Limousine Language amp Units Program language Enotish Ky Sd Voice language English UK Philippa Set Date amp Time Format 6 4 5 1 Program language This button displays the current written language of the program By pushing it you can select from a list of available languages NavNGo Limousine will have to be restarted if you change this setting NavNGo Limousine w
44. does not assume any responsibility for damages incurred due to the software product not being applicable for any defined purpose or the error or lack of interoperation thereof with any other system device or product e g software or hardware 85 8 5 The Licensor shall hereby also draw the attention of the User with great emphasis to the fact that while utilising the software product in any form of transportation observing the traffic regulations and rules e g use of obligatory and or reasonable and suitable security measures proper and generally expected care and attention in the given situation and special care and attention required due to utilising the software product is the exclusive responsibility of the User the Licensor shall not assume any responsibility for any damages occurred in relation to utilising the software product during transportation 8 6 By concluding present Agreement the User shall especially acknowledge the information stated in Section 8 above 9 Sanctions 9 1 The Licensor hereby informs the User that according to regulations of the CA should the Licensor find its rights to be breached the Licensor may 9 1 1 claim the acknowledgement of such breach by court 9 1 2 claim ceasing the breach and ordering the person under breach from continuing such 9 1 3 claim that the person under breach give proper compensation even by way of publicity to the expense of the person under breach 9 1 4 cl
45. don Heathrow Airport TW6 1 M 51 29 217 x W 0927106 Use the up and down buttons to browse through the list and highlight the line you plan to modify You can perform the following operations e Add you can add a new route point or a new final destination if the highlighted item is the last one in the list after the highlighted point The Find menu opens automatically to let you search for an address POI coordinates one of your favourite destinations or select a point from the History list As soon as you select any of these NavNGo Limousine returns to the Edit screen and your selection appears right under the highlighted line e Delete you can delete the selected point from the list If the highlighted item is the last one in the list the previous via point will be promoted to be the final destination e Optimise you can optimise the order in which you will drive through the via points if there is no specific order you would like to keep When using this button NavNGo Limousine reorders the list instantly to save you time and fuel Optimisation is for via points only Your starting point and destination remain in their positions of course e Up and Down using these buttons you can reorder the list by moving the highlighted item up or down in the list 4 5 9 Delete Use Delete to erase the active route along with all its route points start via points and destination If you later decide that you need the same rout
46. e second camera e g it is placed at the exit of a tunnel where GPS position is not yet available the warning will continue Press the Point button to stop the warning These cameras are displayed with the following symbol g ji 4 7 1 5 Red light cameras These cameras check if you obey traffic lights or not The warning is similar to fixed cameras but as there is no speed limit given only the proximity is announced These cameras are displayed with the following symbol 4 7 2 Controlled traffic direction The different cameras can measure the speed of one direction of the traffic both directions or even several directions in an intersection when they are mounted on a rotating base NavNGo Limousine warns you only if you drive in a measured or possibly measured direction The measured direction of the cameras is displayed with the following symbols 4 7 3 Speed limit checked As additional information the speed limit checked by the camera is given for fixed built in and section control cameras When you manually save a camera location from the Cursor menu Page 32 the speed limit of the road if available is used by default but you can change this value with the given control 53 H Lamm cal 4 7 4 Add a new camera or edit an existing one You can add new cameras modify the parameters of existing ones or delete them Move the cursor near the camera on the map then use Edit Cam in th
47. e Quick menu A new screen will open with its details Use Delete on this screen if you wish to cancel the camera Select Camera Type pope s g 4 7 5 Change the settings of the camera warning You can turn on and off the camera warning and fine tune its settings in General settings Page 65 Sound Route Advanced Safety Camera Automatic Might Colors Warn When Speeding 54 5 Find One of the most frequently used functions of NavNGo Limousine is selecting the destination Once you have the destination you can start navigating Getting to this point should be as fast as possible NavNGo Limousine provides you with a versatile search engine designed to find your chosen destination after pushing only a few buttons If you select a location in any part of the Find system you will drop back to the map screen where you will have several possible actions e g set as destination mark with a pin or add as a road safety camera or a POI item 5 1 Selection using the Cursor It is very easy to set your destination using the map Just browse to your desired destination on the map move the Cursor above it and press OK This will open the Cursor menu with route building options Page 32 5 2 Using the Find menu The Find menu is accessible by the Menu button from the map screen The Find menu gives you various possibilities for selecting a location 5 2 1 Find an Address Street Intersection or City Sea
48. e again you will have to rebuild it from scratch NavNGo Limousine will warn you before deleting route data This function has a special role if you have used the Avoid feature during your journey When you arrive at your destination the route line disappears on the map 39 and navigation stops The route is now practically deleted but if you plan a new route the roads manoeuvres and areas excluded from your route will also be avoided when planning the new route Use Delete to completely delete your previous route together with its Avoid restrictions Note When a POI item is used as a route waypoint deleting the route will not delete the POI item itself just its role in the route 4 6 Menu The Menu can be opened from the map screen by pressing the Menu button on the remote control unit It brings up a menu that allows you to access some of the most frequently used functions of NavNGo Limousine 4 6 1 Find tab The first page of the Menu is Find It lets you select a destination without first having to locate it on the map The Find menu will be described in detail later here Page 55 4 6 2 Quick tab This provides quick access to some configurable options Smart Zoom 5 Night Mode j 30 Map Add POT Add Cam 4 6 2 1 Popup Information switch This button enables or disables the popup Point information of the Cursor on the map screen You can also achieve this by pressing the Info button on the
49. e route Note You need not open Itinerary if you run into a roadblock or traffic jam To get an immediate alternative route use the Bypass function of Recalculate Page 36 Note When you use this feature NavNGo Limousine will keep on excluding the same part of the map from later routes until you manually delete the route Page 39 or restart NavNGo Limousine 4 5 7 Fly Over This feature has no navigation function it merely provides a quick view of the route It will present a simulation of the route showing what you will see later when navigating The simulation is run at normal speed using the speed limit of the streets and roads in the route and voice instructions are also played This mode is mainly useful for demonstrating NavNGo Limousine or to learn the way it works before you start your first journey 4 5 8 Edit Use Edit to see the list of all points used in the route The first item in the list is the departure point of the route without a valid GPS position the last reached via point if you open the list during navigation or the point where NavNGo Limousine most recently recalculated the route This means the list is permanently updated and via points drop out during the journey The last item in the list is your final destination London and L London United Kingdom SWIP 3 Westminster Abbey 20p nt Square Westminster Windsor Royal Station 5 Goswell Hill Windsor Clifton Road Hounslow Lon
50. ed with the following symbol T 4 7 1 2 Mobile cameras some cameras are operated from vehicles The database contains some typical places of these mobile cameras They are not always operational at the given location and the speed limit is not specified for them The warning is similar to fixed cameras but as there is no speed limit given only the proximity is announced These cameras are displayed with the following symbol o Be 4 7 1 3 Built in cameras Some cameras are built in traffic lights They work like fixed cameras but they are difficult to spot The warning for proximity and speeding is the same as for the fixed cameras These cameras are displayed with the following symbol j 5 4 7 1 4 Section control cameras These cameras work in pairs and do not measure your current speed but your average speed between the two cameras Both will identify your car and record the exact time you pass them The difference between the two points of time will be used to calculate your average speed 52 NavNGo Limousine will warn you when you approach one of these cameras but as you pass by the warning stays on and your average speed is measured until you reach another camera of this type If your average speed exceeds the speed limit between the two cameras you will receive the same special warning sound as with the other camera types Note In the rare case NavNGo Limousine cannot register the moment you pass th
51. eed to create POI groups in advance You can do it while saving a new POI Delete you can delete any of your previously saved My POI groups This will delete all POIs in that group NavNGo Limousine will ask you to confirm this action Edit you can edit the attributes name icon visibility level of a previously created My POI group x F Edit POI Group Group Name bends o Icon Ce Visible at When the list of My POIs is displayed you have the following options Search you can shorten the list of matching POI items by filtering Just like in Find enter a few letters of the desired POI name When the desired matching item appears in the list below select it ABC Distance by using this button you can have the POls sorted in an alphabetical order Using again will return to the distance based order 47 When you select any of your POls in the list you will open a new window with the details of the selected POI Here you have the following options e OK if you use this button the map screen returns with the selected POI in the middle e Edit you can edit the attributes name icon and group of the selected POI oc Edit My POI Group e Delete you can delete any of your previously saved POIs NavNGo Limousine will ask you to confirm this action 4 6 3 4 Favourites You can select two of your most frequent destinations to be your favourites Page 64 The original names of these points are Home and W
52. ement Licensor shall withhold all rights vested in the software product except for those that the User is entitled to according to explicit legal regulations or that of present Agreement 6 Rights of the User 6 1 The User is entitled to install the software product on one hardware device desktop handheld portable computer navigation device at a time and to run and use one copy thereof 6 2 The User is entitled to make one security copy of the software product However if the software product is operational after installation without the use of the original media copy then the original media copy is deemed to be a security copy In all other cases the User is only entitled to use the security copy if the 84 original media copy of the software product has become unsuitable for proper and legal use without any doubt such state thereof being supported by acceptable proof 7 Limitations of use 7 1 The User is not entitled 7 1 1 to duplicate the software product to make a copy thereof 7 1 2 to lease rent lend distribute transfer it to a third person with or without a consideration 7 1 3 to translate the software product including translation compilation to other programming languages 7 1 4 to decompile the software product 7 1 5 to modify extend transform the software product in whole or in part to separate it into parts compose it with other products install it in other products utilise it in o
53. ettings These screens let you set a large number of different advanced settings and initiate some special functions These settings and functions are divided into groups 71 General Sound Advanced Cockpit Settings User Data Management Map Options Smart Zoom Settings Language amp Units Set Time Zone Select any button to set the corresponding parameters They all open new windows where you can make your desired changes 6 4 1 Cockpit settings There are three route data fields on the left of the Cockpit screen Their content is fixed in Cruise mode when there is no active route but for Navigation mode you can change their content on this screen The available values are listed here Page 31 Cockpit Settings Cockpit screen layout zi p field Middle field 4 Timeto destination F Bottom field 4 Arrival at destination P 6 4 2 User data management Everything that was saved pins My POIs Favourites track logs etc or modified Settings History lists since NavNGo Limousine was installed is stored in a user database located in the internal memory of the Limousine Here you have options to save restore or reset the database or parts of it User Data Management Backup Data Reset Advanced Settings Remove Pins 6 4 2 1 Backup Data You can make a safe copy of the whole user database on the memory card Use this button to copy all user data and settings on the memory card The back
54. ext route event is reached or after 40 seconds the arrow stops and remains grey until GPS reception returns This way short tunnels can be crossed without losing the position 4 2 7 Selected map point also known as the Cursor During normal navigation the Cursor is the position arrow that shows your location and heading When you move the map or select a point in Find Page 55 the centre of the screen becomes the Cursor marked with a small red dot and permanently radiating red circles to make it conspicuous at all zoom levels and map density You can use this point as the destination of your route you can search for a POI near to it mark it with a drawing pin save it as a POI or as a road safety camera 24 4 2 8 Marked map points Pins The Cursor can be marked with a Pin Pins are shown as being stuck in the map A Pin is visible at all zoom levels and remains in its position until you unpin it or delete all Pins in Advanced settings Page 73 The colour of the Pin is automatically selected by NavNGo Limousine Different colours help you identify a Pin in the History list Page 61 later There they are shown together with their address and GPS Coordinates To place a Pin in the map or to remove the Pin close to the Cursor press the Mark button Tip A quick way to tell the coordinates of a location you found on the map is to Mark it with a Pin and then look for the coordinates in the History list Page 61 This
55. f all points in the group or subgroup you are already in Scroll down to browse through the list 4 E Find POI oo Shell A Avenue Fodh Paris 1 amp rre Arrondissement Pais 75016 France Relais des Champs Elys es WS Avenue des Ebys es Paris fime Search results are ordered by their distance from the given reference point nearest first Note In the case of POI items that you have created you can also see the results in alphabetical order Push the button with the label ABC that appears between Search and the page number Once the desired POI item is selected NavNGo Limousine will show its details x LN View POT Total Relais des Champs Elys es Paris Bere Arrondissement Paris France Avenue des Champs E 331 56520000 Services Gas Station m OK will return to the map with the selected POI in the centre Using the arrow in the top left corner returns to the list of search results Tip If you want to find the nearest POls or if you are close to one of them but do not know exactly where it is or what its name is use the All button on the very first screen of POI search and get a list of the nearest POIs Scroll down if you cannot see the desired place on the first page of the list 5 2 5 Find one of the Favourites Home Work If you have already set up your favourite destinations in the Manage menu you can select either of them by simply using the button with the name on it
56. g Greenwich UK Once you have entered both numbers press Done to make the selection Tip The quickest way to tell the coordinates of a point is to move the cursor there or to select it in Find and then come to this page and read the coordinates Tip If you need to reformat coordinates to the format selected in NavNGo Limousine enter the coordinates in the format you have press Done to show it on the map then come back here to see the same location in dd ddddddd format 5 2 4 Find a POI You can select your destination from the thousands of POIs included with NavNGo Limousine or from the ones you have previously created This screen helps you find the one you are looking for POI items are categorised to let you locate them more easily On this screen you can see the first page of the top level POI categories There are three levels altogether Fo ovid i T E My POI Ea Services E Gai Transportation b Shopping E Es Entertainment By Culture The search will be carried out around a certain reference point Always look at the current reference point shown in the field above the POI category buttons and confirm that it matches what you want To change the reference use the Change Ref button in the top right corner POI Location Cursor d Destination 3 Coordinate 4 History Address 3 Once you use the Change Ref button you are presented with these choices 62 e Address you can specify
57. h up orientation is selected fixed in the midpoint of the map when Overview is selected or always at the bottom centre of the map when Track up orientation is selected 4 3 3 Cursor No 3 As described earlier Page 24 if you move the map or select one specific item in Find it will become the selected point on the map marked with a small red dot and radiating red circles to make it conspicuous You can use this point as starting point via point or destination for your route you can search for a POI near it mark it with a pin or save it as a POI or road safety camera 29 Note When GPS position is available a Hand icon will appear indicating that you have disabled Lock to Position Pushing the Follow button will re enable the position lock and move the cursor back to the current GPS position 4 3 4 Map orientation and Overview No 4 You can view the map screens in three different presentation modes You can cycle through them using the North button Page 15 This icon indicates the current mode Track up North up or Overview N AAA 4 3 5 GPS position quality No 5 Similarly to the icon found on the GPS Data screen Page 50 the map screen informs you about the GPS signal T e The black satellite dish with the red exclamation mark shows there is no connection with the GPS receiver GPS navigation is not possible Check the connection between your NavNGo Limousine and GPS receiver N e Red
58. he green satellites To identify satellites use their numbers also shown in the virtual sky The more satellites your GPS tracks the green ones the better your calculated position will be Additional pieces of information on this screen are current position in latitude longitude format elevation speed date time and calculated accuracy Note Accuracy can be affected by several factors the GPS cannot take into account Use this accuracy information only as estimation There are two icons on the left to show the status of the GPS connection and the quality of reception GPS connection indicator In the middle to the left there is a lamp Different colours indicate the connection status dark lamp means there is no communication on the selected port red lamp means connection to a GPS receiver has not been established yet a slowly blinking yellow lamp means that there is no connection to the GPS receiver but NavNGo Limousine is trying to connect e a fast blinking green lamp means that there is communication with the GPS and data is being received GPS data quality indicator In the top left corner there is a satellite dish to show the quality of the GPS position Different colours represent different signal quality e black with a red cross means there is no connection with the GPS device This should never be the case if your device has a built in GPS 9 e red means the GPS is connected but no
59. he whole postcode 6 digits you do not need to select the street You will proceed to the House Number Input screen Just enter the house number to specify the exact address If the name of the settlement is of more than one word the searched pattern can be any or the combination of those You can search for multiple partial words by inserting space characters in the pattern For example Key West in Florida will be found if you enter Ke W or even We K any word order will do opace can be added by pressing O zero and you can delete the last entered letter by pushing the left direction button You do not need to enter accents when searching for a destination Type only the base letters the letter most similar to the accented one and NavNGo Limousine will search for all their combinations in the database e g for the Canadian town Deleage you only need to type Deleage and the rest is done by the program As you start typing NavNGo Limousine will calculate the number of settlements matching your pattern s This number is shown at the right end of the input line Note When the name of the settlement contains a character that is not available on the keyboard e g apostrophe or dash NavNGo Limousine considers it a space that splits the word That is why you can search for Alleyn Et Cawood with all the following search criteria A E C Et A or Al Ca Tip In case you are looking for a ci
60. hen press OK to make the selection 3 2 2 List selectors When the values in the list need to be named only the current value is shown sometimes together with a short description in a horizontal stripe with arrows at both ends Highlight the selector white border and press the left or right direction buttons to change the value You need not confirm your selection As soon as you leave the screen the selected value becomes effective The only exception for this is the Time Zone setting where you need to press the OK button to change the previous value In cases when the left and right buttons have another function first you need to activate the control by pressing OK Now you can change the value with the left and right buttons Press OK again to leave this setting Vehicle 4 Vehicle q Car Vehicle 3 2 3 Sliders When a feature has several different unnamed numeric values NavNGo Limousine will show sliders that look like analogue potentiometers to set the desired value Master If the value limits are not displayed at the ends of the slider the leftmost position means the minimum value while the rightmost position represents the maximum value In cases when the left and right buttons have another function first you need to activate the control by pressing OK Now you can change the value with the left and right buttons Press OK again to leave this setting 3 2 4 Switches When
61. how to set up the GPS connection refer to Page 6 4 7 Road safety cameras Road safety cameras such as speed cameras and red light cameras are special POI types in NavNGo Limousine The application can warn you when you approach one of these cameras You can fine tune this warning in General settings Page 65 You can upload camera locations into NavNGo Limousine with the help of a PC application Check our web site for details You can save camera locations manually It is described in detail at the Cursor menu Page 32 To save time instead of saving them one by one camera locations can be listed in a special text file and copied into the data folder reserved for cameras You will not be able to modify or delete these cameras in NavNGo Limousine Modify the text file then restart the application instead Check our web site for details opeed cameras are displayed with small camera symbols on the map 51 4 7 1 Camera types There are five types of speed cameras 4 7 1 1 Fixed cameras oome cameras stand by the roadside looking in one direction measuring one or both directions of the traffic They measure your current speed For these cameras you can specify the controlled traffic direction and the speed limit NavNGo Limousine will warn you when you approach these cameras in the measured direction If your speed exceeds the speed limit near the camera a special warning sound will be played These cameras are display
62. ibed here Page 33 This screen shows information about the current route and has a few additional options to check and modify your active route Route Information Settings Z Itinerary Fly over Edit Delete 4 6 3 2 Manage Track Logs Using NavNGo Limousine it is also possible to save the track logs of your journeys This screen lets you manage all your track logs When it comes up it shows a list of all track logs already saved Track Logs BW Paris By Night With Taxi Track saved on 2005 11 01 23 07 01 4 Prague To Berlin LEES The original name of a track log is the date and time when it was recorded You can change their name to something more meaningful if you wish Each track log has a colour shown to the left of its name when the track log is visible on the map If the track is not visible a horizontal line is shown here Press OK and the highlighted track log will toggle between showing and hiding that track The track log will be drawn on the map using the colour next to its name When a track log is being recorded a new line appears in this list with a horizontal line as newly recorded track logs are not shown in the map normally 44 Track Logs Currenth recorded track log Tip If you wish to see the track log currently being recorded press OK when it is highlighted to make it visible In this screen you have the following options e Record this will initiate tr
63. if a route is already active Cancel closes the Cursor menu without changing the route 4 5 Route Information screen The Route Information screen has all the data and functions you need while you navigate Without an active route most of the buttons are inactive and route data cannot be displayed 33 As a reminder you can open this screen two ways by pushing the Route button Page 12 of the remote control unit or selecting the Route menu point in the Manage menu Itinerary Time Left 1 11h Edit Estimated Anival Delete Fly aver 4 5 1 Route data displayed for destination and via points In the right part of the screen you see information about the current route These fields are continuously updated while you keep this screen open When you open the screen all fields contain information on reaching your final destination Press 0 zero repeatedly to see data on the via points starting from the first one through the final destination again a E 1 Settings H k Itinerary Itinerary Time Ler 1 11h Estirrested Aniwa Fly aver Edit Delete 4 5 1 1 Distance Left This value can also be displayed in one of the Route data fields on the Cockpit screen as Distance to destination This is the distance you need to travel on the route before reaching your final destination 4 5 1 2 Stops Left This is the number of route points still to be reached all Via points
64. ill ask for confirmation before it restarts 6 4 5 2 Voice language This button shows the current language of the voice guidance By pushing the button you can select from a list of available languages and speakers Select the desired new spoken language 19 6 4 5 3 Units You can set the distance units to be used by the program NavNGo Limousine may not support all of the listed units in some voice guidance languages If you select a measurement unit that is not supported by the chosen voice guidance language you will see a red warning message under the selector 6 4 5 4 Set Date amp Time Format You can set the date and time format displayed by NavNGo Limousine Various international formats are available 1 Set Date amp Time Format Date format d 0Y MM DD b Date delimiter Time format 6 4 6 Set Time Zone You can set the time zone you are currently in To avoid the accidental modification of this value you need to confirm your choice with the OK button shown on the screen If you use the arrow button in the top left corner unlike with other settings the time zone will not be changed m Set Time Zone Time zone d GMT 1 Berlin Rome P 6 5 Manual GPS configuration This screen is separated from the other settings as it is normally not used at all The GPS is automatically detected when the program is first started and there is nothing you need to set manually It can be accessed f
65. imousine right away This document is the detailed description of the software Although NavNGo Limousine can easily be discovered by experience it is still recommended that you read through this manual to clearly understand the exact function of each button and icon Table of Contents 1 Warnings and safety miormmaton 8 2 General NOMAN EE 9 3 Operating NavNGo Limousine Control 10 3 1 The remote control unt 10 3 1 1 POWER eu Le EE 11 3 1 2 Vu RER 12 Selo LOON I eel NER TEST 12 3 1 4 FOULS tee tal E ee errEo vod vb UE PLU FUOD PDC FER rb YOU rob WES reUnS 12 3 1 5 ONE IBIOFTOSOT DOX dE 13 3 1 6 Mark sticking a drawing pin in the map 14 3 1 7 Ins SHOW NEX DI einen 14 3 1 8 Mute all sounde 14 3 1 9 molle E T 15 SE E Ne Eu le rale ee WEE 15 3 1 11 The direction buttons and Ok 15 IRI NOMD WEE 15 KLS The NUMENGE KeyDad siscocncasdcacncnddondsenddoncmoatseadecndtondseadtondmcatvondsondiend saad 16 SW MEAS EE 17 O22 DISPIAVEO CONTOS EE 17 3 2 1 IDIFECES ES CIOTS 1eisaeiea ie secas eee aeo e yon P SER HERE ERE EE UHR E 17 3 2 2 ISU SCISCIONS E 18 IZS Older saat vate Cv eee eed UID est eee ee 18 3 2 4 Sen 18 EE 19 4 Discovering the program through the screens nnnannnnennannnonnnnnensnrennnrnnrnenni 20 E eer EE ZU a CIhe e e EE ZU 4 2 1 2D and 3D map views 21 4 2 2 ZOOM NOV RTT ULTIME 21 4 2 3 Daylight and night colour schemes n nanannnnannanennnnnnnennnn
66. imousine will warn you 6 2 Sound settings Settings on this page determine the way NavNGo Limousine sounds General Route Advanced l Voice Keys Dynamic Volume 6 2 1 Master sound volume The position of this fader determines the device volume level If you fully turn down the volume the light on the left goes off and the program becomes muted 6 2 2 Voice guidance volume Tthe slider on the right will adjust the loudness of NavNGo Limousine s audible guidance voice instructions and speed camera warning In its leftmost position the voice guidance is suppressed in its rightmost position the master volume applies 6 2 3 Key sound volume The slider on the right will adjust the loudness of key sounds the audible confirmations of pressing hardware buttons In its leftmost position the key sounds are suppressed in its rightmost position they are played at the master volume level Note The sound effects of NavNGo Limousine are context sensitive They will be different if for example you open or close a window or you enable or disable a setting 68 6 2 4 Dynamic Volume When driving at high speed the noise in the car may be too loud to clearly understand the voice guidance messages and to perceive the key sounds Using Dynamic Volume you can instruct NavNGo Limousine to increase the volume when your speed exceeds a certain minimum and reach its highest volume determined by the Master volume slider in
67. keep the average brightness of the screen low with carefully selected colours to still keep you informed about all the necessary information on the screen You can change between day and night views manually in the Quick Menu Page 41 or let NavNGo Limousine do it automatically Page 66 for you Note The automatic day night mode is based upon the current date and GPS position by which NavNGo Limousine calculates the exact sunrise and sunset times on the particular day at the particular location Using that information NavNGo Limousine can automatically switch between the colour schemes a few minutes before sunrise when the sky has already turned bright and a few minutes after sunset before it gets dark Tip There are several daytime and night colour schemes included with NavNGo Limousine To select the one that suits your needs the best make your selection in Settings Page 74 Note The colours mentioned and screenshots included in this manual refer to the default daytime and night colour schemes They may not look the same in the schemes you have chosen Tip If you use NavNGo Limousine after sunrise or before sunset look for the sun in the sky in the map background using a flat 3D view It is displayed at its actual position to give you another way to orientate and also to provide some eye candy 4 2 4 Streets and roads The similarity of NavNGo Limousine to paper roadmaps is also convenient when it c
68. l of them would make the maps too crowded to see how POI items are shown on the map see Page 25 In order to avoid that you can decide which POI groups to show 45 and which ones to hide on the map NavNGo Limousine has a multi level POI category system You can set the visibility of the top two levels All levels below that will be shown or hidden according to their respective category i e you can set the visibility of Petrol Stations in the Services category but all brands listed under that will either be shown or suppressed together Manage POI Fl E My POI EZ Services C wg Transportation Shopping E E Entertainment E Culture Groups shown with a tick mark are visible on the map groups without a tick mark are hidden while the ones shown with a pale tick mark have some of their subcategories shown and some others hidden If you highlight any of the POI groups the button in the bottom left corner will become Show if the POI group is hidden or Hide if the group is shown or partly shown Tip To make a partly shown group fully shown use this button twice First you will hide the whole group and then you will have it displayed with all its subgroups Press OK to list the subgroups of the highlighted POI group Here you cannot see partly shown subgroups as visibility can only be set for the top two levels of categories Showing and hiding a subgroup is done the same way as for the main groups Manage POI
69. lly appears or enter R D U U R D Ru U and select the desired street from the list below e Either way you get the list select rue d Uz s e Now you need to enter 17 and press OK to finish the process 17 rue d Uz s Paris France is selected 60 5 2 2 Find in History If you have used Find before or saved map points as POIs marked points with a pin or picked and used points of the map before they all appear in the History list This list is ordered by the time the points were last used The most recently used locations are always at the beginning of the list Leeds g Leeds Vies Kn are Uned Kin Hw 13 ZimmermannstraBe Uelzen 29525 NH 52 57 2X x E 10 34 696 Ir 19 ZimmermannstraBe Uelzen 29525 A 52 57 7201I x E 10 34 654 N 52957 656 x E 10934 802 ele ngennergerite Ve 20505 LL Kagereuergarraces amp Neues Theater Just pick any of the recent locations as your destination Here you have no possibility to reorder the list or filter it by name but if you move down the list you can scroll through the complete list to find your preferred point Tip If you will need a location later but you do not want to save it as a POI just mark it with a pin and remember its colour to find it easily in the History list 5 2 3 Find Coordinates NavNGo Limousine also lets you enter your destination by map coordinates The coordinates need to be in latitude
70. longitude format and based on the WGS84 earth model the one used by most GPS devices m Coordinates Input 2 7 44 41210 When you enter this page the coordinates of the current GPS position or the selected map point the Cursor if Lock to Position is inactive are shown at the top of the display The coordinates are always shown in decimal degrees format but you can enter the coordinates in any of the three latitude longitude formats decimal degrees degrees and decimal minutes or degrees minutes and decimal seconds You can even enter the latitude and longitude in different formats Entering a latitude longitude pair is easy The left field contains the latitude It starts with an N North or SG South letter This tells NavNGo Limousine whether the point is in the Northern or the Southern hemisphere Use the button to change the hemisphere Enter numbers for the latitude Use the decimal point if the degrees 61 minutes or seconds are not integers Use the button the label depends on the current cursor position inside the latitude to start entering minutes after degrees or seconds after minutes When finished highlight the latitude field press the right direction button to jump to the longitude field and enter it as you did latitude This time the hemisphere changing button tells NavNGo Limousine whether the point is located East or West from the meridian crossin
71. n No 121 32 zr EEG eui ULUSM 32 AS Route Information SCIeeft o Eege Eege 33 4 5 1 Route data displayed for destination and via points 34 4 5 1 1 PT SNA SC C ae 34 4 5 1 2 Sei E T T 34 4 5 1 3 OT FINO e A 34 4 5 1 4 ESlimated a TEE 35 Bee WVSFDIDG KR Lei e isien ieee e E tei e uale cen oo LS eiua eetuetalecatnge 35 4 5 3 EO COO 9 eet arte teers Em 36 4 5 4 Ke Me P 36 a oro lale REUNION 37 4 5 6 gl 37 4 5 7 FIV OVE T a 38 Ce E 39 4 5 9 BIIII 39 e ME MONM 40 4 6 1 lie WA EE 40 AOZ QE Ce E 40 4 6 2 1 Popup INFOnMaAtlOn SWILGIN WEE 40 4 6 2 2 Smart ZOOM SWINCM 285 oci tidie co aed eae e auia i aea aeta avisar d adeo td eus 41 4 6 2 3 Night Mode SWINCI EE 41 4 6 2 4 SC RRE En DEE 41 4 6 2 5 ATRO eee ene me ee one ee en eee eo ee T 41 4 6 2 6 POTO Nats ass ass T 43 4 6 3 Manage taD ecesna UT 43 4 6 3 1 ROUE 44 4 6 3 2 Manage Track LOGS eici tented 44 4 6 3 3 Manage POI Points of Interest eeeeeueseusse 45 4 6 3 4 FAV OUNILES AE E 48 4 6 3 5 EE 49 4 6 3 6 ORS DISC CO gee E 49 Ad Road safety cameras cotes Ue Ua ERU cic eee 51 4 7 1 tee eg 52 4 7 1 1 Ee el 52 4 7 1 2 No 0 kere 0
72. nce Germany 1 2 5 2 1 2 Selecting a street or the centre of the settlement Once the settlement or state in Australia is selected you can continue by specifying the street you are looking for Paris France Secret amp 1 110 Place Victor Hugo ca ER L me Parondeosemerst Bass 75116 123 Rue du Docteur Victor Hutinel a m CB C3 58 Selecting the centre of the settlement If you wish to navigate to the settlement displayed in the top centre of the screen select the City Centre button in the top right corner The search result will be the centre point of the city where its name is displayed on the map Note This point is not the geometrical centre but an arbitrarily selected point chosen by the creators of the map usually the most important intersection in case of a small town or village and for larger cities an important intersection in the city centre Selecting a street If you are looking for an address or an intersection within the selected settlement shown at the top of the page you need to first enter the street name you are looking for Tip If you are looking for an intersection choose the street that has a rare or unusual name first This way you need to enter fewer letters to get the list of results You may also choose the shorter of the two streets first This way it will be faster to choose the second one from the list of crossing streets after the first street has been selected Tip
73. nise your location on the map These are surface waters large buildings forests etc Tip These objects are normally displayed using textured polygons that look natural to the eye You may wish to switch the textured display off Page 74 to free some of the resources of your Limousine by replacing textures with plain coloured surfaces 4 2 6 Current position and Lock on Road When your GPS position is available a blue arrow yellow when using night colours shows your location on the map The direction of the arrow represents your heading The arrow is sized and vertically rotated with the zoom and tilt levels to always look realistic Avenue des Champs Elys es F ux Avenue des Champs Elys es NavNGo Limousine has a built in Lock on Road feature that always puts the position arrow on the road on the axis of the street in case of one way streets or on the side of the road where you drive e g on the right in Germany and on the left in the U K on two way roads The location received from the GPS receiver is shown as a blue dot on the map This can help you locate your position if the GPS accuracy is poor and the Lock on Road system puts you on the wrong street It is also the location saved in the track log Page 44 When the GPS position is lost the arrow turns grey but the journey continues on the recommended route for a short period of time with the speed last detected before the GPS position was lost When the n
74. nly disable street names and POI icons if NavNGo Limousine follows your position As soon as you move the map and Lock to Position Page 29 is disabled street names and icons become visible again Push the Follow button to re enable Lock to Position and have the labels and icons disappear again 6 4 3 3 Textured Polygons Enable textured polygons and have rivers lakes forests and other large objects displayed in a more realistic and attractive way on the map See Page 23 Disabling it will lead to uniform areas but better performance 6 4 4 Smart Zoom settings omart zoom is a lot more than just a usual automatic zoom While navigating a route when approaching a turn it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction If the next turn is at a distance it will zoom out and lower the view angle to be flat in order to let you see the road in front of you or it can even switch to an Overview mode to let you follow your position on the map While cruising if there is no active route and you are just driving Smart Zoom will zoom in if you drive slowly and zoom out when you drive at high speed These automatic features can be set up on this screen Smart Zoom Route event distance for Overview mode 3km Overview zoom level 5km 6 4 4 1 Smart Zoom You can enable or disable Smart Zoom with this switch Independently automatic Overview can still be selecte
75. nnnnnnnnnnnnna 22 4 2 4 ell sisitcx MAT OaS ar m TT MTM 22 4 2 OUISrL ODIGCIS E 23 4 2 6 Current position and Lock on Hoad 24 4 2 1 Selected map point also known as the Cursor 24 4 2 8 Marked map POINTS PIS sse sets esee tos haces lindo ub Pues Lina Em ebat Eom 25 4 2 9 Visible POIs Points of nterest 25 4 2 10 Road Sately cameras EE 26 4 2 11 Elements of the Active Houte 26 4 2 11 1 The start point via points and the destination 26 24 2 11 2 JAhnmated Burr el Te rn Le 26 4 2 11 3 The active leg of feroute cece cece eeeceeece ees eeseeeseeeaeeeeess 2 4 2 11 4 Inactive legs of Ueroute cc ccecccecceeceseceeceeceeeceeeseesaeesaues 2 4 2 11 5 Roads in the route excluded by your preferences 2 4 3 ereen With Map COCK DI EE 20 4 3 1 I nwurucdommt 29 4 3 2 Follow mode lock to GPS position and heading No 2 29 49 9 OUISOPF NO S NEE 29 4 3 4 Map orientation and Overview No Ai 30 4 3 5 GPS position quality No ai 30 43 6 Sounds MUTE NO G EE 30 4 3 Track Log recording playback indicator No 7 30 490 QUtmenbsTtee TINO EE 31 4 3 9 Travel and Route data NO 9 certo rrt tro oer reote eren 31 4 3 10 Distance to next turn No 101 31 4 3 11 Next street Next settlement No 1 32 4 3 12 Approaching next tur
76. nt Section 4 any degree of use installation to a computer or other hardware installation of such hardware into a vehicle pressing of the Accept button displayed by the software during installation or use hereinafter referred to as actions of use shall be deemed as implicit conduct resulting in the conclusion of the Agreement between the User and the Licensor 2 3 Present Agreement shall by no means entitle persons who unlawfully acquire use install on a computer install in a vehicle or utilise in any manner whatsoever the software product 2 4 The end user license agreement between the Parties shall be concluded with terms set forth in present Agreement 2 5 The time of conclusion of present Agreement is the time of executing the first action of use commencement of use 3 Applicable law 3 1 In issues not regulated by present Agreement the jurisdiction of the Republic of Hungary shall be applicable with specific reference to the Act No 4 of 1959 on the Civil Code CC and to Act No 76 of 1999 on Copyrights CA 83 3 2 Present agreement is issued in English and in Hungarian In case of dispute the Hungarian text shall prevail 4 The object of the Agreement 4 1 The object of present Agreement shall be the navigation guidance software product of Licensor hereinafter referred to as software product 4 2 The software product shall include the operating computer program its complete documentation and the m
77. oint the location with an intersection press the Find intersection button in the top right corner and select the desired street name from the list of available intersections of the previously selected street displayed in the top centre of the screen The crossing of the two streets will be the selected point ks Avenue Victor Huge gt arr obs de Montespan Pans nne Amoncdissement 25116 Cit de l Argentine n Lire Aone 75116 Place Charles de Gaulle Paris Bin Arrondissement 7511 w E 20 5 2 1 5 An example for a full address search This is an example for the most complex address search finding an address from abroad In this example your current position is not in France and you are looking for an address in Paris France the address 17 rue d Uz s The following steps shall be taken after entering the Find Address section e You see the list of recently used cities Paris does not appear in the list e Select Change Country in the top right corner to change the country e Select France in the list e Now select the city in France Enter Paris using the virtual keyboard e The first settlement in the list is Paris as it is the exact match Select it e Now you need to enter the name of the street e You need not enter accents the apostrophe and you can enter more of the words in any order separated by spaces Enter R D Uz D Uz Uz and rue d Uz s automatica
78. omes to streets the most important elements of the map concerning navigation NavNGo Limousine uses similar colour codes to those you are accustomed to and the width of the streets also refers to their importance so it will not be difficult to tell a highway from a small street Streets and roads have names or numbers for identification Of course this information can be displayed on the map NavNGo Limousine uses two different ways to show street labels The conventional way is the same as a roadmap it displays the name of the street aligned with the street The alternative is a kind of virtual signpost stuck into the street itself You need not choose between the two modes NavNGo Limousine will use the one best for the current tilt and zoom level Zoom in to have only a few streets on the map and start tilting up and down to see how NavNGo Limousine switches between the two modes in an instant Note The automatic switching is on even when using Smart Zoom At first you may find it odd but later you will discover how it adjusts the displayed information to the current view of the map It is important as the driver must be able to read the map at a glance Tip If you do not want to be bothered by street names during navigation turn them off in Map Options Page 74 4 2 5 Other objects To help orientate you the map also contains objects that have no other navigating function than to help you recog
79. or figure push the left direction button 16 London United Kingdem VLA SPM 5 Whitehall Court Westminster pars er UR 3 a i SWIA 2 tuv wxyz Whitehall Crescent ER EB London hensigten Londor Chesaington KTS 1 123 Whitehall Gardens EB C3 SWIA Note The button O zero has a special function if pressed when the map screen is displayed Pressing it will open the About screen Page 20 where you can find information about the map licenses you have the creators of NavNGo Limousine and the legal aspects of using the program 3 1 14 123 abc This button will toggle the lower part of the remote control unit between a numeric and an alphanumeric keypad The program will always choose the most probably needed keypad for you but if you wish to change it e g to enter numbers in a street name push this button to alter the keypad layout When entering letters or numbers is possible the current keypad layout is always shown in the right section of the screen 3 2 Displayed controls The input channel of NavNGo Limousine is the remote control unit This section describes the controls that appear on the screen and how you can use them with the remote control unit 3 2 1 Direct selectors some of the settings can be chosen from a short list of possible values If the values can be described graphically all values are available on the screen w ZEN eo 8 Move the highlight on the desired value and t
80. or maps that let you see the map at various zoom levels always with optimised content Street names and other text objects are always displayed with the same font size never upside down and you only see as many streets and objects as needed to find your way around the map Zoom in and out to see how the map changes oy Changing the scale of the map is very easy Push one of the Zoom buttons to scale the map up or down Page 12 Note If you need to zoom out briefly to locate your position on the map use the Overview mode instead of zooming out and back in The Overview mode is a 2D North up view that can be started by pressing the North button Page 15 twice Note NavNGo Limousine has a special Smart Zoom function for navigation that automatically rotates scales and tilts the map in 3D map mode to always give you the optimal view in your current situation When approaching a turn it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction If the next turn is at a distance it will zoom out and lower the view angle to flat in order to let you see the road in front of you 21 4 2 3 Daylight and night colour schemes The different colour schemes let you adjust NavNGo Limousine to the brightness of the environment Use the daylight and night colour schemes accordingly Daylight colours are similar to paper roadmaps while the night colour schemes use dark tints for large objects to
81. ork Favourite Destinations Secondary destination Work You can rename them and specify their locations To determine the location you can use the same Find menu options Page 55 as for a route destination and depending on that choice and the information available the location will be shown here as a street address a latitude longitude position or both 8 Abbey Orchard 5treet 48 Note If you select either of your favourite destinations in the Go menu Page 64 before defining it NavNGo Limousine will warn you to first set it up here 4 6 3 5 Settings This button opens Settings where you can set various parameters of the program Settings are described in detail in a separate chapter Page 65 4 6 3 6 GPS Data screen The GPS Data screen is a collection of information received from the GPS device and it also serves as the entry point to the following screens e GPS Setup e Time Sync E18 5 9 Date Time GPS data displayed The virtual sky on the left represents the currently visible part of the sky above you with your position as the centre The satellites are shown at their current positions The GPS receives data from both the green and grey satellites Signals from the grey satellites are only received while green ones are used by the GPS to calculate your current location On the right you can see the satellite signal strength bars Grey bars are for the grey and black bars are for t
82. orth up mode with one difference the zoom level in this mode has a fixed default to give you a better look of where you are on the map You can change the zoom level at any time this will not cause the Hand icon to appear but when entering Overview mode later the default zoom level will be restored The arrow representing your position will be fixed in the middle of the screen When you move the map in Overview mode the Hand icon will appear and when you push the Follow button it will move the map to have your current position in the middle of the map again You can set up NavNGo Limousine so that it will switch to Overview mode during navigation when the next turn is far away You can specify this distance and the fixed zoom level of Overview in Advanced settings Page 75 An aeroplane icon indicates Overview mode Push the button again to return to Track up automatic rotation mode 3 1 13 The numeric keypad The lower part of the remote control unit is a numeric and alphanumeric keypad Use these buttons 1 9 and 0 to enter numbers or if text needs to be input use them as if you were writing an SMS message press the buttons repeatedly to have the desired letter displayed on the screen For example if you press the button 5 several times the display will show the following characters one after the other J K L J K If you need to enter space push O zero If you need to clear the last entered letter
83. rching for a city a street an intersection or an exact address can all be done in the Find Address module If you know at least a part of the address this is the quickest way to find the location 55 The following illustration shows the structure of the address search module There are five levels Country State City Street and Address The state level appears only in case of some countries e g Australia USA The list of recent cities and states is the entry point of the module The green rectangles are the exits You can complete your search by selecting the centre of a settlement the midpoint of a street an intersection of two roads or an exact address Select Country select State Australia USA etc Level 1 TEE zullus Select Steet E Lee 5 You enter the module at Level 3 From this point you can go forward down to give the name of the street then the house number or intersection or backward up to change the city state or country to search 5 2 1 1 Selecting the city state and country to search in The first screen of the address search module is the list of recently used cities and states in Australia During normal navigation the first line of the list is always the settlement you are in or near to Without valid GPS position or if the Hand icon appears the first line is the settlement the Cursor is in or near to Select City France Enter Name Zip Code gt Pari
84. rom the GPS Data screen Page 51 by pushing the Config button There are three values to set on this screen If you have no particular reason to do otherwise leave their default value AUTO untouched and let the program set up the GPS connection automatically 76 Manual GPS Configuration 6 5 1 Protocol This is the language the GPS and NavNGo Limousine communicate in NavNGo Limousine can receive data in NMEA or SiRF protocol The default NMEA is the worldwide standard that practically all GPS devices are able to use 6 5 2 Port There are different wired and virtual serial ports on your Limousine You need to know which of them your GPS is connected to and set it here 6 5 3 Baud rate You can also set the speed your GPS is communicating at The higher the speed the smaller the position delay there will be there is always a small delay between the real position and the position shown in navigation systems due to the time consuming processing and communication In AUTO mode the program will use the highest possible speed between the GPS receiver and the main unit Tf 7 Troubleshooting guide Thank you again for purchasing our product We hope you will enjoy every minute of using it However you may face difficulties before you get really accustomed to NavNGo Limousine In such cases please refer to this table of frequently encountered problematic situations cannot find the blue yellow when using night colou
85. rs arrow that would show my location Navigation does not start Check the GPS status icon on the map screen Page 30 or the GPS Data screen Page 49 It is likely that the GPS cannot determine your position Move the GPS out of cover to get a position fix The GPS is connected sending valid position data yet cannot see the blue yellow when using night colours arrow that would show my position You should see a large semi transparent Hand icon Page 29 on the screen Press Follow to re enable the Lock to Position feature that moves the map back to your actual location The blue yellow when using night colours arrow shows my location but cannot see the route green or red line and no voice instructions are announced It is likely that you have no active route Check the upper left corner of the Cockpit screen Page 29 if you can see the indication for the next turn or not If this field is blank you have no route planned so you need to create one first cannot see the Hand icon on the screen yet the map is not rotated during driving Look for a small red N letter on the compass icon Page 30 or an aeroplane icon instead of it It is likely that you had initiated the North up map orientation or the Overview mode unintentionally Press North to revert to Track up mode with automatic map rotation I enabled the speed warning as soon as bought the product but I have just been fined for speeding because NavNGo Limo
86. s amp amp me Arrondissement Paris E def Marseille Berlin Heiligensee Should the settlement you are looking for appear on the list select it and you will immediately jump to the Street Name Input screen with the selected city name or postcode shown at the top of the screen If the desired settlement is not displayed turn the page to see more of this list Tip If during navigation you need to know the name of the city or the country you are currently in just start Menu Find Address and read the first line of the list This function leads to a reliable result only if GPS position is available and you have not disabled Lock to Position by moving the map the Hand icon is not displayed 56 Selecting a new settlement to search in If you are looking for a city or town or state you cannot find on the list you can select the desired city by entering a few letters of its name or some digits of its postcode The list of recent settlements turns to a list of settlement names matching the pattern you have just entered When the desired settlement name appears in the list move the highlight on it then press OK When you reach the last settlement name on the screen continue pushing the down button and the list will scroll to show more matching items Note Postcodes may not be available for the selected country In this case you need to enter the name of the settlement Note In Netherlands if you enter t
87. s during navigation by going to Advanced settings Cockpit Settings Page 72 See the following list for your options The only restriction is that you cannot select a value that already appears in another field The possible field contents are e Distance to destination default value for the top field e ime to destination estimated time en route default value for the middle field e Distance to next via point e Time to next via point e ime to next manoeuvre next route event e Speed e Speed limit e Arrival at next via point e Arrival at destination default value for the bottom field 4 3 10 Distance to next turn No 10 This field shows the distance to go before reaching the next route event turn roundabout exit etc 31 This field is only displayed when navigating a route 4 3 11 Next street Next settlement No 11 This field shows the road or street that comes next in the route itinerary If you are not yet in the settlement where this next street is NavNGo Limousine will display the name of the settlement instead of the name of the road or street A bullet symbol will appear next to the name of settlements to help you tell them apart from street names Avenue Victor Hugo Ozoir la Ferri re Pontcarre Avenue des Champs Elysees This field is only displayed when navigating a route 4 3 12 Approaching next turn No 12 This bar is only visible when approaching the next route event It
88. shows there is a connection but the signal is too weak to give a position GPS navigation is not possible N e Black shows there is a GPS position and navigation is possible When only one arc is shown the position is 2D no altitude available and position error may be significant yet NavNGo Limousine is ready to navigate eh e A black dish and two arcs represent a 3D GPS position NavNGo Limousine is ready to navigate 4 3 6 Sounds muted No 6 oounds can be muted using the Mute button Page 14 When sounds are muted a crossed out speaker icon appears d 4 3 7 Track Log recording playback indicator No 7 When a track log is being recorded a red icon is displayed on the map screen 30 During track log playback a green icon will blink 4 3 8 Current street No 8 This field of the Cockpit screen shows the name or number as available of the current street or road you are driving on 4 3 9 Travel and Route data No 9 The contents of these three fields are different when cruising without an active route or navigating following an active route While cruising the fields show the present speed the current speed limit and the time of day While navigating a route these fields show the estimated time needed to reach the destination ETE the distance to destination and the estimated arrival time at the destination ETA by default You can choose what to display in these three field
89. tes after sunset based on the time and location information provided by your GPS Once you set a permanent colour scheme in the Quick menu Page 41 this automatic mode turns off If you need NavNGo Limousine to switch between colours for you again you need to re enable this feature 6 1 3 Warn When Speeding Maps may contain information about the speed limits of the road segments NavNGo Limousine is able to warn you if you exceed the current limit This information may not be available for your region ask your local dealer or may not be fully correct for all roads in the map This setting lets you decide whether you want to receive the warnings or not If you turn on this switch NavNGo Limousine will open a new screen to let you customise the parameters used by the speed warning Sr Speed Warning Options E i Speeding tolerance 45 76 Alternative speed limit 110 kmh Alternative speeding tolerance 310 imh You can set two different kinds of behaviour for the warning one is applied up to a certain speed limit and the other one is used above that 6 1 3 1 Speeding tolerance NavNGo Limousine will warn you when you exceed the speed limit by the amount specified here Select whether you want to specify the tolerance as a Fixed value offset to the speed limit or as a Percentage The slider will change depending on which mode you have chosen Both positive and negative values can be given in either offset or percentage mode 6
90. ther products not even with the aim of achieving interoperability with other products 7 1 6 apart from using the computer program to obtain information from the map database included in the software product to decompile the map database to use copy modify extend transform the map database in whole or in part or the group of data stored therein or to install it in other products utilise it in other products not even with the aim of achieving interoperability with other products 8 Non warranty limitation of responsibility 8 1 Licensor hereby informs the User that although the greatest care was taken in producing the software product yet with respect to the essence of the software product and the technical limitations the Licensor does not warrant for the software product being completely error free and the Licensor is not bound by any contractual obligation by which the software product obtained by the User should be completely error free 8 2 The Licensor does not warrant that the software product is suitable for any purpose defined either by the Licensor or the User and does not warrant that the software product is capable of interoperating with any other system device or product e g software or hardware 8 3 The Licensor does not assume any responsibility for damages incurred due to an error in the software product including errors of the computer program the documentation and the map database 8 4 The Licensor
91. ty name that has more than one word you can reduce the list of matches faster if you enter a few letters from each word Select City France Paris 29 kr a amp abc ER ER ecce ASB Paris l i Ben Ge vir gy Le Petit Paris en ER ER 77 Omtor smg France 123 Le Touquet Paris Plage Pas de Calais France c r3 57 Once you have selected the city you can continue by entering the street name as described here Page 58 Changing the state Australia USA etc some of the maps contain state information If the settlement you are looking for is in a different state use the Change State button in the top right corner of the city selection screen then select the appropriate state Should you wish to search for an address in the whole country select All states at the beginning of the list Select State lt All states Australian Capital Territory New South Wales Northern Territory Queensland 1 2 When the state is selected you need to select a settlement by entering a part of its name or postcode then selecting from the list of available matching items as described before Changing the country If your destination is in another country use the Change Country button in the top right corner of the state selection screen Australia USA etc or the city selection screen and select the country from the list a Fi Select Country Australia Finland Fra
92. ue yellow when using night colours arrow representing your actual position on the nearest road This automatic feature is necessary as the position given by the GPS receiver is not perfectly accurate Under normal circumstances Lock on Road will eliminate the occasional position error If the corridor of error is too large your position may be shown over a different street on the map You can only avoid that by using the GPS antenna positioned so that it has a direct view to as large a portion of the sky as possible Normally Lock on Road is always active in NavNGo Limousine when GPS position is available See also in Page 24 81 Lock to Position When GPS position is available NavNGo Limousine will automatically keep moving the map to always have the blue yellow at night arrow representing your actual position on the screen You can move the map to lose this position Then the Hand icon appears on the screen Pressing the Follow button will re enable Lock to Position See also Page 29 Map Orientation NavNGo Limousine is able to rotate the map for your convenience If you choose Track up mode the map will be rotated to look in the direction of your heading Selecting North up the map remains oriented to have North toward the top Use the Rotate left and Rotate right hardware buttons to turn your map in the direction you wish This will immediately turn off the automatic rotation A small compass in the top right section of the map screens
93. up is always created with the same file name so backing up data will always overwrite previous backups 72 Tip If you wish to keep more versions of the user database or you wish to save one particular state e g saved POIs and track logs of your holiday look for the backup file on the SD card rename it or save it to your PC Tip If you move to another Limousine and you wish to keep your data and settings make a backup remove the card insert it into the other Limousine then return to this Settings page and push the Restore Data button as described in the next section NavNGo Limousine will then restart and all your previous POIs track logs settings city and find history lists will also appear on the new Limousine 6 4 2 2 Restore Data If you have accidentally deleted things or you have created a number of temporary items and you do not wish to delete them one by one you can use this button to restore the state of NavNGo Limousine to the latest backup By using this button you will lose all of the changes made since the time of the latest backup NavNGo Limousine will warn you about this before overwriting the current database with the backup 6 4 2 3 Remove Pins Normally Pins can be deleted one by one Since they are shown at all zoom levels and you may end up having too many of them this button lets you delete all of them together NavNGo Limousine will warn you that you are about to lose all your Pins 6
94. usine failed to warn me For an accurate speed warning the actual speed limits of each street and road must be present correctly on the map This is a relatively new feature of digital maps so it may not be available in some countries and its accuracy still has much room for improvement ask your local dealer for the details in your region This feature can help you in several cases but it cannot be considered as serious speed control That 78 is why it can be turned on and off separately from the reliable voice guidance Page 66 19 8 Glossary The manual may contain many technical terms Please look below for an explanation if you are unfamiliar with some of them 2D 3D GPS reception The GPS receiver uses satellite signals to calculate its your position Depending on the current positions of the ever moving satellites in the sky and the objects in your environment the signal that your GPS device receives may be weaker or stronger Your GPS needs strong signal from at least four satellites to give a three dimensional position including elevation If fewer satellites are available it may still be possible to calculate the position but the accuracy will be lower and the GPS device will not calculate elevation This is called 2D reception NavNGo Limousine shows the quality of reception on the GPS Data screen Page 50 and the map screen Page 30 Note that 2D and 3D GPS receptions have nothing to do with the 2D and 3D display modes
95. ute in reverse order when you wish to insert a stopover go to A but first get some fuel at B or want to influence the direction of the route This menu point works only if a route is already active Remove Via removes the via point near or at the Cursor The route will be recalculated immediately excluding the deleted point This menu point replaces Add Via and is available only if the Cursor is near or at a via point Remove Start removes the starting point of the route if it is near or at the Cursor The route will be recalculated immediately with the first via point as the new starting point or if there are no via points the route will be deleted This menu point replaces Add Via and is available only if the Cursor is near or at the starting point the blue flag Remove Dest removes the final destination of the route if it is near or at the Cursor The route will be recalculated immediately with the last via point as the new destination or if there are no via points the route will be deleted This menu point replaces Add Via and is available only if the Cursor is near or at the destination the red flag Continue add a new destination to be reached after the previous destination The new destination replaces the old one which is now demoted to a via point This is the way to build your multi point route in straight order when you wish to visit several destinations go to A then to B This menu point is available only
96. will be calculated track log will not be saved and navigation will stop 3 1 2 Menu This button will open the Menu of NavNGo Limousine The Menu will be described in detail later Menu Press it again to return to the map screen Cockpit This button will also jump to the map screen from various other screens 3 1 3 Zoom in and out Zoom will change the scale of the map in both 2D and 3D map modes Zoom out shows a larger part of the map while Zoom in shows a smaller part of the map in more detail The automatic Smart Zoom function will do the necessary zooming for you when navigating zooms out if the next turn is at a distance to let you see far ahead and zooms in when approaching a turn to give you a better view of the upcoming manoeuvre If you manually change the zoom level Smart Zoom will no longer scale the map by itself automatic tilting and rotating remains active You need to press the Follow button to return the zoom control to Smart Zoom 3 1 4 Route Information screen To give easy access to the most important data screen during navigation this button is reserved for opening the Route Information screen The Route Information screen will be described in detail later Page 33 12 Itinerary Fly over Edit Delete 3 1 5 Point Information box If you have moved the map or selected a point in the Find menu i e the Cursor the red dot with the radiating red circles appear press the Info button
97. y The driver s attention should be on the road Plan your route before departure and pull over if you need to change route parameters NavNGo Limousine has a built in optional Safety Mode that will prevent you from using the program functions if your car is in motion Unless a passenger will be the only one to operate NavNGo Limousine we strongly encourage you not to turn the Safety Mode off It is also important that you look at the display only if it is absolutely safe to do so You should always observe traffic signs and road geometry before you obey any instruction from NavNGo Limousine If you need to deviate from the recommended direction NavNGo Limousine will suggest a modified route according to the new situation Never place the device or the display where it can obstruct the view of the driver is within the deployment zone of airbags or where it can cause injuries in case of an accident For further information please consult the End User License Agreement Page 83 2 General information NavNGo Limousine is a navigation system optimised for in car use It provides door to door navigation for both single and multi point routes using adaptable route parameters NavNGo Limousine is capable of planning routes throughout the whole installed map set Unlike some other products NavNGo Limousine does not require that you change maps or switch to a poorly detailed general map to navigate between map segments or countries You always

Download Pdf Manuals

Related Search

Related Contents

to view additional information about this item.  Honda Common Service Manual  E4--$3000 FR|MMER - Pdfstream.manualsonline.com  Harbor Freight Tools 22 in. Electric Hedge Trimmer Product manual    Le Pan II 8GB Black  Sony MSAC-M2 User's Manual  Field oriented control of PMSM motor exploiting SLLIMM™ nano    

Copyright © All rights reserved. Failed to retrieve file