Home

Version 2 User's Guide

Contents

1. 48 WinFence User 5 Guide Using the GIS Interface The following information can be entered and edited using this form Text This is the text for the paragraph There is no limit to the length of the text The Rich Text toolbar at the top of the form is used to format the text This toolbar is described at the bottom of this section Left This is the position of the left border of the paragraph in real grid coordinates either feet or meters If the Paragraph button on the toolbar is used to create the paragraph the program will fill in this position The units of measurement are specified in the location map grid settings Right This is the position of the right border of the paragraph in real grid coordinates either feet or meters If the Paragraph button on the toolbar is used to create the paragraph the program will fill in this position The units of measurement are specified in the location map grid settings Top This is the position of the top border of the paragraph in real grid coordinates either feet or meters If the Paragraph button on the toolbar is used to create the paragraph the program will fill in this position The units of measurement are specified in the location map grid settings Bottom This is the position of the bottom border of the paragraph in real grid coordinates either feet or meters If the Paragraph button on the toolbar is used to create the paragraph the program will fill in this positi
2. 233 Width 188 Height 46 Nest D X Cancel Help The following information can be specified on this form File Name This is the name of the bitmap file to display on the cross section To change the name of the file edit this name or click on the button to the right of the name If the button to the right is pressed a Open bitmap file form will be displayed Select the desired file and then press the Open button Stretch Bitmap Select yes to stretch the bitmap to fit within the specified borders If No is selected only the center of the bitmap can be entered for the position If the Bitmap button on the toolbar is used to add the bitmap Stretch Bitmap is set to No Maintain Aspect Ratio Select Yes to keep the aspect ratio of the bitmap the same as stored in the file If Yes is selected the bottom of the bitmap will be automatically adjusted to maintain the aspect ratio If Stretch Bitmap is set to No then this field will not be displayed and it is assumed that the aspect ratio is maintained WinFence User 5 Guide 101 Cross section Data Left This is the position of the left border of the bitmap in inches or millimeters from the left side of the page If the Bitmap button on the toolbar is used to create the bitmap this field will not be displayed If Stretch Bitmap 1 set to then this field will not be displayed The units of mea surement are specified in the
3. Title Bar used to edit the layout and data types for the title bar Title Bar Legend used to edit the layout and strata in the legend Legend Cross Section used to edit the layout default scales axes fonts and d Scale Bar borehole properties to plot V Location Map Scale Bar used to edit the position and format of the scale bar Paragraph Text Location Map used to edit the layout and format of the location map Bitmaps Paragraph Text used to add edit and delete paragraph text on the Lines template Rectangles Bitmaps used to add edit and delete bitmaps on the template Page Layout 10 WinFence User 5 Guide Using WinFence Lines used to add edit and delete lines and arrows on the template Rectangles used to add edit and delete rectangles on the template Symbol Library If a lithologic symbol library is currently displayed on the desktop the edit menu will contain the following commands Symbols used to edit the descriptions and symbols in the Lithologic Symbols ibrary View Menu This menu contains commands for adjusting the view and toggling toolbars on and off Zoom displays a submenu that can be used to select a zoom factor between 25 and 200 percent ull Screen Full Screen displays the cross section in full screen mode zoom factor equal to 100 percent v Show Project Toolbar Show Project Toolbar if checked the Project toolbar Show Cross Section Too
4. Opening a Password Locked Template To open a template that has been password locked simply follow the same procedure as a user would normally follow to open a Template Right click File then Templates then Open Template or use the Template Toolbar to open the template This will open up the Password form on the next page if the template is password locked otherwise the template will open normally 166 WinFence User 5 Guide Setting a Password for the Template Enter Template Password Please enter the password for the template Bottom Bar Password X Cancel Help If the template is password locked enter the password and click OK If the user enters the correct password they will be permitted to edit the template otherwise the user is permitted to open the template with read only access WinFence User 5 Guide 167 Templates 168 WinFence User 5 Guide oymbol Libraries M 4 Dd Di x Cancel Help oymbol Libraries Libraries are used to store lithologic bitmaps that can be used for the strata symbols Each library contains 18 bitmap symbols WinFence comes with several previ ously defined libraries In addition any number of new libraries can be created making the number of lithologic symbols available unlimited Each symbol also has a default symbol description stored in the library which 1 used when creating legends When a legend is created the default description can be used for the symbo
5. X To finish editing the sand click on the Ok button and then on the Finish Editing but ton Next select the coal strata on the Quick toolbar Then click on the Edit Points button on the bottom tab Select the last point on the right of the coal and shift the point down to meet the top of the sand After the point has been moved click on the Ok and Finish Editing buttons on the Quick toolbar The cross section should then look as shown on the next page 30 WinFence User 5 Guide Saving the Cross Section Distance Saving the Cross Section To save the cross section either select the Save menu item from the Cross Section popup menu or click on the Save button on the Cross Section toolbar Printing the Cross Section amp To print the cross section select the Print menu item from the File menu or click the Print button on the Cross Section toolbar WinFence User 5 Guide 31 Displaying the Fence Diagram c To display the fence diagram showing the three cross sections in the project click on the Dis play Fence Diagram button on the Fence Diagram DFD toolbar The Display Fence Dia gram form below will be displayed showing which cross sections will be included in the fence diagram Display Fence Diagram xj Cancel Help Cross Section Name In this example we will include all 3 cross sections Click on the Ok button to display the fence
6. 4 Symbol Size Button The Symbol Size button is used to set the symbol size and color of the boreholes wells on the location map When this button is pressed the Symbol Font Properties form below will be dis played This form can be used to select the size and color of selected and unselected wells bore holes Selected wells boreholes are those that intersect the pathline Symbol Font Properties Symbol Font Size i Color Selected Symbol Font Size Color Page Margins Button The Margins button is used to set the margins of the location map All the wells boreholes posi tions will be scaled to fit within the boundaries of these margins on the location map When this button is pressed a Margins Setup form will be displayed This form can be used to specify the left right top and bottom margins Margins Setup Margins Top jo Left Right b p ES Bottom 0 ad Jf Ok X Cancel Help 40 WinFence User 5 Guide Using the GIS Interface Well Data Button The Well Data button is used to enter and edit the locations and symbols of the boreholes wells on the location map When this button is pressed the Well Data form below will be displayed x v _ Eevaton E 76 26 1071 BH102 405 202 74 107 5 BH103 481 247 77 106 5 BH104 456 332 77 106 5 BH105 537 276 78 104 2 BH106 582 332 79 35 6 BH107 551 183 76 108 2 a4 Dd di
7. 42 WinFence User 5 Guide Using the GIS Interface Zoom Full Button The Zoom Full button adjusts the location map view to the grid coordinates that are set in the Location Map setup Just click once to view the full map size x Undo Button The Undo button will undo the previous operation on the location map Add Borehole Well Button The Add Borehole Button will add a new borehole or well To add a borehole or well click on the button and then on the location on the map The new borehole well will then be created using Win LoG Line Button The Line button allows the user to place a line anywhere on the location map To draw a line click on the Line button then click and hold down the left mouse button at the first point of the line and drag the cursor across the screen to the end point of the line When the user is satisfied that they have the cursor over the appropriate end point they should release the mouse button Once this is done the program will open the Edit Line form below The user can then decide the orienta tion of the line the line style and they can tweak the start and end positions if they desire Edit Lines Lines Orientation Arrow Diagonal Arrowhead Horizontal No C Yes Vertical Position End C Start Position x n tet zu 200 Arrowhead Size 8 End 400 100 Line Style X Cancel Help WinFence User 5 Guide 43 Proj
8. 76 WinFence User 5 Guide Creating a New Cross Section The Ok button is used to complete the pathline entry and create the cross section X The Cancel button is used to abort the creation of the cross section When it is pressed the toolbar will disappear 2 The Help button will display help on creating a cross section After the pathline has been specified and the Ok button pressed the Enter Cross Section Name form below will be displayed This form displays a list of current cross sections in the project Enter a unique name for the cross section and then press the Ok button Enter Cross Section Name Existing Cross Sections Cross Section Name corel Next a template needs to be selected for the cross section After the Ok button on the Enter Cross Section Name form has been pressed the Select Template form shown on the next page will be displayed Select the template to use and then press the Ok button WinFence User 5 Guide 77 Cross section Data Select Template Templates Default Metric Default25 Example 3 No bar Legal Side Bar Side Bar Legal Side Bar Metric M 4 M Jf OK Cancel Help After the template has been selected the Select Boreholes form below will be displayed This form can be used to select which boreholes will appear on the cross section By default all of the boreholes within the pathline are selected 9 Select the Boreholes you wis
9. Copyright 2000 All Right Reserved GAEA Technologies Register af Continue To register the program press the Register button the Registration form shown below will be dis played In the middle of this form a unique serial number will be displayed This serial number is unique for each computer Registration To register the software and obtain an unlock code click the obtain unlock code button registration form on GAEA s internet site will be displayed Fill in the information on the form and then submit the form Serial Number n 67766622 After you have received an unlock code enter it below and click the button Unlock Code Store Unlock Code Jf OK Cancel Help WinFence User s Guide 5 Getting Started To register the program an unlock code must be obtained using this serial number If your com puter is connected to the Internet you can obtain this unlock code by clicking on the Obtain Unlock Code button After the button is pressed a registration form on GAEA s web site will be displayed on your internet browser Fill out the form and then click on the submit button After your registration information has been received an unlock code will be emailed to you If your computer is not connected to the Internet you can call or fax us the serial number After GAEA has received your unique serial number an unlock code will be generated and emailed or faxed to you Wh
10. Layout Tab Template Title Bar Show Title Bar Justification e Main Title Font D Colo Title Font Sims wv Ok X Cancel Help The Layout tab shown above is used to specify the following information Show Title Bar Check to show the Title Bar If unchecked no Title Bar will be displayed and the information below will not be displayed Justification This sets the justification of the titles and can be either left or right Color This is the background color of the Title Bar When the Color button 1s pressed a Color form will be displayed Using this form either a basic or custom color can be selected Line Style This is the style of line used to draw the border around the Title Bar When the Line Style button is pressed the Line Properties form will be displayed This form can be used to set the line style color and width Main Title Font This is the font used for the first title and data item of the Title Bar When the Main Title Font button is pressed a Font form will be displayed This form can be used to select the type face size and color of the font WinFence User 5 Guide 133 Templates Title Font This is the font used for the titles except the first of the Title Bar When the Title Font button is pressed a Font form will be displayed This form can be used to select the type face size and color of the font Data Font This is the font used for the data items excep
11. WinFence Version 2 User s Guide Copyright c 2005 GAEA Technologies AE A All rights reserved Printed in Canada WinFence Software License Agreement and Limited Warranty This License Agreement is made and entered into by and between GAEA Environmental Engineering Ltd having a office at 87 Garden Street Whitby Ontario Canada LIN 9E7 the Distributor and the Licensee with reference to the following terms and conditions A The Distributor has the legal right to distribute software and documentation currently called WinFence the Licensed Product B The Licensee now desires to license the use of the Licensed Products NOW THEREFORE the parties agree as follows License Distributor grants and the Licensee hereby accepts the nonexclusive license to use the Licensed Product subject to the terms and conditions contained in this agreement Licensee May 1 Unless otherwise agreed in writing use the Licensed Product on any single computer system at the licensed facility 2 Transfer the Licensed Product from one location to another so long as it is not installed simultaneously on more than one computer Licensee May Not 1 Make copies of the Licensed Product 2 Make copies of the software documentation 3 Unless otherwise agreed in writing install the software onto more than one computer at a time 4 Alter decompile disassemble or reverse engineer the Licensed Product 5 Remove alter or obsc
12. 0 05 The tilt or angle of the camera user s head is controlled by the Tilt slider at the bottom of the Scene Map To adjust the tilt click on the slider triangle and move it to the left to look down or to the right to look up On the right side of the slider the tilt angle is indicated positive for up and negative for down Using a Light Source Shading can be enabled on the fence diagram by clicking on the Light Source button on the Fence Diagram toolbar When the button is clicked the light source represented on the Scene Map as a small light blue rectangle will be activated The position of the light source can be adjusted by clicking on the rectangle and moving it As the rectangle is moved the light source on the fence diagram will be adjusted To turn off the light source click on the Light Source button again on the Fence Diagram toolbar WinFence User 5 Guide 121 Fence Diagrams Changing the Borehole Size Bore 9 0 5 1 1 1 4189 The size diameter of the boreholes wells cab on the fence diagram can be adjusted using the Bore Slider on the Scene Map To adjust the size click on the slider triangle and slide it to the left to make them smaller and to the right to make them larger The color and outline of the boreholes can be changed in the Preferences of the program see Chapter 3 Changing the Grid Elevation Grid Eley 1 Y The elevation of the horizontal grid can be adjusted usi
13. Click on the point that is closest to where you want to add the point An additional point will be created halfway between this point and the next point The new point can then be positioned by clicking on it and dragging 1t with the mouse In addition the other points that are highlighted with boxes can also be dragged to a new location with the mouse When the new point has been positioned properly select Done from the Edit Strata popup menu Edit Points The points of a boundary can be edited by selecting the Edit Points menu item from the Edit Strata popup menu If the current strata has a top and bottom boundary you will also need to select which boundary you are editing If the boundary has more than one segment the cursor will change to a hand and you will need to select which segment to use of the existing points on the boundary segment will be highlighted with a box Click and hold down the left mouse button on the point to be edited Drag the point to its new location and then release the button The other points on the boundary can also be edited the same way When you have edited all of the points required select Done from the Edit Strata popup menu Delete Points The points of a boundary can be deleted by selecting the Delete Points menu item from the Edit Strata popup menu If the current strata has a top and bottom boundary you will also need to select which boundary you are editing If the boundary has more than one segme
14. Orientation Landscape Portrait wv OK The following information can be entered on the Page Setup form Page Size This is the page size of the template When the arrow at the right is pressed a list of available page sizes is displayed Inches or Millimeters The units for the width and length of the page These units will be used when specifying the layout of the legend If the Page Size is Custom the units can be set to either inches or millimeters Width If the page size is specified as custom the page horizontal width in inches or millimeters must be specified Length If the page size is specified as custom the page vertical length in inches or millimeters must be specified Orientation This is the orientation of the page either portrait longer side is vertical or land scape longer side is horizontal WinFence User 5 Guide 163 Templates Saving a Template To save the template either select the Save Template menu item from the File menu or click on the Save button on the Template toolbar 2s The template can also be saved under a new name by selecting the SaveAs button on the Template toolbar The Enter Template Name form below will be displayed This form will list the current templates in the database Enter a unique name for the template and then press the Ok button Existing Templates Unique Template Name X Cancel Help 164 WinFen
15. Using the GIS Interface File Name C Program Files GAEA WinLoG Bitmaps acme bmp Bitmap Information Bude Poin Height 4 gt Rectangle Information Left 60 Right 50 733 733 M n cX X Cancel Help The following can be edited from this form File Name This is the name of the bitmap file to display on the location map To change the name of the file edit this name or click on the button to the right of the name If the button to the right 1 pressed an Open bitmap file form will be displayed Center X This is the horizontal position of the center of the bitmap in real grid coordinates either feet or meters If the Bitmap button on the toolbar is used to create the bitmap the program will fill in the position otherwise the user will have to enter in the position Center Y This is the vertical position of the center of the Bitmap in real grid coordinates either feet or meters If the Bitmap button on the toolbar is used to create the Bitmap the program will fill in the position otherwise the user will have to enter in the position Width This is the width of the bitmap in real grid coordinates either feet or meters If the Bitmap button on the toolbar is used to create the bitmap the program will fill in the position otherwise the user will have to enter in the position Height This is the height of the bitmap in real grid coordinates either feet or meters If the Bitmap
16. diagram The fence diagram can then be manipulated as shown on the next page using the scene map See Chapter 5 for a detailed description on how to manipulate fence diagrams 32 WinFence User 5 Guide Displaying Fence Diagrams Duuu urri 100 0m WinFence User 5 Guide 33 34 WinFence User 5 Guide Projects Open Project Form Project Number Project Name CompletedT utorial Completed Tutorial C Program Files GAEA D atabasesComplet Samples Samples C Program Files GAEA D atabase sS amples testi test C Program Files GAEA test Tutorial Tutorial Project C Program FilesGAE AT utorial zl 4 b Di Edit Directory Cancel Help Projects As discussed in the introduction the WinFence program 15 based upon the project concept for data storage Using this method a separate Microsoft Access 2000 database 15 used to store each project for each application Each project 1s stored in a separate directory which can be on the same computer or spread across a network The num ber of databases for each project will depend upon the applications being used for that project If for example the WinLoG and WinFence programs are being used with the project there will be two project databases The names of the project databases are the project name combined with the application name For example if the project name is 980205 then the project database name for WinFence would
17. the File View Window and Help items will appear on the menu bar File Menu This menu contains commands similar to those in other Windows applications and contains the following submenu Projects displays a submenu used to create open save delete close and import projects Projects Cross Sections displays submenu used to create open save close Cross Sections gt and delete cross sections this menu item is dimmed if no project is Templates currently opened Symbol Libraries Templates displays a submenu used to create open save close and delete templates Import gt Symbol Libraries displays a submenu used to create open save close and delete lithologic symbol libraries Print Import used to import cross sections and templates in exchange files Print Setup Export displays a submenu used to export cross sections and tem plates to exchange files bitmap files metafiles or the clipboard this menu item is dimmed if no cross section or template is currently Exit opened Print used to print cross sections and templates this menu item is dimmed if no cross section or template is currently opened Print Setup used to adjust the printer settings Preferences used to set program preferences Exit closes the program Edit Menu After a cross section template or symbol library has been opened the Edit menu will
18. them to be discontinuous Multiple segments are most often used in heavily faulted areas The but tons at the bottom are used to move to the previous segment move to the next segment insert a segment and delete the segment Use Strata This is used to select an existing strata for the boundary instead of specifying the points When the arrow to the right is pressed a list of existing strata will be displayed Line This is the style of line to use when drawing the boundary When the Line button is pressed a Line Properties form will be displayed This form can be used to select a line style color and width Distance The coordinates for the points describing the boundary are displayed as a series of dis tances and depths Each boundary must start and end on the edge of the cross section or on another boundary This is the horizontal distance to the point in the same units as specified in the template Depth This is the vertical depth to the point in the same units as specified in the template WinFence User 5 Guide 87 Cross section Data Editing Strata After a strata has been created or selected it can be edited using the Edit Strata popup menu This menu can be obtained by clicking the right mouse button on the cross section The Edit Strata popup menu can be used to edit the properties of the strata definition and boundaries delete the strata add and edit Edit Properties boundaries or return to the previous menu The bo
19. 496 85 X Water Level Symbol N Line Style gt Color Line Width fi Symbol Location si Show Symbol W Static Level XE C Dynamic Level EE gt Cancel Help The following information be entered and edited using this form Show Water Level Check to show this water level on the cross section Point X The water level is composed of a series of line segments between points This is the hori zontal position of the points Point Y This is the vertical position of the points Line Style This 15 the style of the water level The line style can be changed by pressing the Line Style button Symbol Location This 1 the location of the water level symbol on the polyline It is expressed as a percentage of the distance from left to right of the cross section So that 25 would put the sym bol one quarter from the left side of the cross section Show Symbol Check to display the water level symbol 110 WinFence User Guide Water Levels Symbol Color This is the color of the water level symbol Press the color button to change the color Symbol Line Width This is the width of the line used to draw the water level symbol Symbol Size This is the relative size of the water level symbol Symbol Type This selects whether to draw the symbol as a static water level shaded triangle or dynamic water level hollow triangle T The Add Point
20. 60 WinFence User 5 Guide Exporting Data To export to a bitmap file select the Bitmap File menu item from the Export submenu Specify the file name on the SaveAs form shown on the next page and then press the Save button After the Save button is pressed the Bitmap Information form shown below will be displayed This form is used to set the number of vertical and horizontal pixels for the bitmap file Save As Save in 9 WinFence Picture Bitmaps File name Save as type Bitmaps bmp Metafile Exporting to an enhanced metafile 15 the same as exporting to a bitmap file Any currently dis played cross section or template can be exported To export to a metafile select the Metafile menu item from the Export submenu Specify the file name on the SaveAs form and then press the Save button Managing a Project Database WinFence uses Microsoft Access databases to store all its Templates Cross sections Fence Dia grams Legends Libraries Projects etc In version 2 several new features have been added to make managing these databases easier and quicker These are Compressing and Repairing a Database Backing up a Database Restoring a Database Backing up all WinLoG Data WinFence User 5 Guide 61 Projects Compressing and Repairing a Database Compressing and repairing a WinFence project or main database can be accomplished by selecting the Compact and Repair Database submen
21. Af OK Cancel The following information be entered for each of the wells boreholes in the list Borehole ID This is the name or ID of the borehole or well The Borehole ID is used to retrieve data from the WinLoG database Care should be taken when editing these IDs if they do not match up with the IDs in the WinLoG database no data will be retrieved for the borehole well X This is the horizontal or x coordinate of the well relative to whatever reference grid is being used for the project The x coordinate can be in any units as long as the same units are used throughout the project Y This is the vertical or y coordinate of the well relative to whatever reference grid is being used for the project Depth This is the depth of the well borehole The depth is used to draw the borehole on the cross section and to scale the borehole data on the cross section The depth should be in the same units as those used for the vertical axis of the cross section WinFence User 5 Guide 41 Projects Elevation This is the elevation of the well borehole The elevation is used to position the bore hole vertically on the cross section The elevation should be in the same units as the depth Symbol This is the symbol to use when plotting the well borehole on the location map When this field is clicked a Symbol button will appear To edit the symbol press the Symbol button and the Well Symbols form will be displayed Select
22. Alteration Zones Strata Data Boundary Bottom Boundary EJ 1 u Asa 54 Take Fill Description V Name Tab The Name tab above can be used to specify the following information Use Curve Fit Check to fit a smooth curve through the boundaries of the strata If unchecked the boundaries will be created using straight line segments between boundary points When a smooth curve is fit to the boundaries the curve fit factor specified in Preferences is used This factor can be adjusted to control the amount of smoothing 84 WinFence User 5 Guide Adding Strata Multiple Segments Check if the strata is to contain multiple segments Otherwise the strata can contain only one segment Only use multiple segments where strata are discontinuous Name This is the name of the strata When a new strata is initially created this field is an input box and a unique name can be entered After the strata has been created it becomes a combo box that can be used to select a different strata in the cross section Type This is the type of strata It can be either a layer lense alteration zone fault or intrusion The type of strata is defined when the strata is initially created and can not be changed Description This is the description of the strata The description will appear in the legend if the strata 1s included in the legend There is a Memo Toolbar at the top of the description field that can be use
23. DXF Cross Section Line Style Label Style 7 Location P Y Offset 0 s Default Line TO Label Font X Cancel Help DXF Tab The DXF tab is used to specify the DXF file that can be used as an overlay on to the location map is Location Map Setup Scale Units Grid Map Axis Fence Line oo o0 JA Ok X Cancel Help 56 WinFence User 5 Guide Deleting a Project To select the DXF file press the DXF File button and then select the file from the form Ig Save Button The Save button will save the current settings of the location map so that it will appear the same the next time the project is opened B Closing the Project The current project can be closed so that no more changes can be made by selecting the Close Pro ject menu item of the Projects submenu clicking the Close button on the Project Toolbar Deleting a Project An existing project can be deleted by selecting the Delete Project menu item from the Projects submenu When this is selected a list of existing projects will be displayed as shown below Delete Project une ame Dieta CompletedT utorial Completed WinLoG Tutorial C XProgram Files GAEA D atabasexComplete WinFence Tutorial WinFence Tutorial C Program Files GAEAD atabase WinFencr WinFencel WinFence Example 1 C Program Files GAEA D atabaseWW inFenci WinFence3 WinFence Example 3 C Program Files GAEA D atabaseWw inFenci Samples WinLoG Samples
24. Templates Strata Font This is the font to use for the strata names When the Strata Font button is pressed a Font form will be displayed This form can be used to select the type face size and color of the font Number of Columns The number of columns of strata in each row of the legend Column Width This is the width of each column in inches or millimeters The units of measure ments are set in the page layout Symbol Height The height of the strata symbols in pixels Symbol Width The width of the strata symbols in pixels Color This is the background color of the legend When the Color button is pressed a Color form will be displayed This form can be used to select either a basic or custom color Line Style This is the style of line used to draw the border around the Legend When the Line Style button is pressed the Line Properties form will be displayed Left This is the position of the left border of the legend in inches or millimeters from the left side of the page The units of measurement is specified in the page layout Right This is the position of the right border of the legend in inches or millimeters from the left side of the page Top This is the position of the top border of the legend in inches or millimeters from the top of the page Bottom This is the position of the bottom border of the legend in inches or millimeters from the top of the page 136 WinFence User 5 Guide Legend Strata Tab Te
25. Under Curve Type None X No C Yes No C Yes Vertical Spacing 0 Connecting Line Background Shade Ici N Line Style No Yes Color GS Cancel Help If the column type is a double graph or double geophysical log then the Customize Graph Columns form will have two tabs Each tab is used for one of the graphs or geophysical logs The data entry for both tabs is identical The Customize Graph Columns form can be used to specify the following parameters Graph Title This is the title to use for the graph up to 255 characters The Graph Title will be displayed at the top of the column If the column type is a double graph or double geophysical log then both Graph Titles will be displayed at the top of the column Units Title This is the units of the graph up to 255 characters The unit title will be displayed below the graph title Minimum Scale This is the minimum value for the horizontal axis of the graph If the value is zero the program will calculate the minimum value based on the data specified Maximum Scale This is the maximum value for the horizontal axis of the graph If the value is zero the program will calculate the maximum value based on the data specified Log Scale The horizontal axis can have either a linear or a logarithmic scale 144 WinFence User 5 Guide Cross Section Show Grid To draw horizontal and vertical grid lines set Show Grid to yes Horizontal Spacing Th
26. a cross section 1 Click on the Bitmap button on the Toolbar Next click on the location of the center of the bitmap After the button has been released the Open form shown below will be displayed Select the bitmap file and then press the Open button Look in Bitmaps M c E3 Picture N acme bmp N Bottom5 bmp IS British3 bmp N Blank bmp N Bottom bmp IS British4 bmp A Bottom bmp N Bottom7 bmp 3 BritishS bmp N Bottom2 bmp N Bottom bmp A British6 bmp A Bottom3 bmp S Britisht bmp S British7 bmp N Bottom4 bmp S British2 bmp i British8 bmp e Filename Files of type All gif bmp ico emf wmf Cancel 2 By selecting the Bitmaps menu item from the Edit menu or Popup menu and then clicking on the Add button on the form The Open form above will then be displayed Select the bitmap file and then press the Open button Using this method the location of the bitmap must be specified on the Bitmap Information form as described below 100 WinFence User Guide Bitmaps Editing Bitmaps Existing bitmaps can be edited by selecting the Bitmaps menu item of the Edit or Popup menus or by clicking the left mouse button inside the bitmap on the cross section The Bitmap Information form below will then be displayed ii Bitmap Information File Name C Program Files GAEA WinFence Bitmaps acme b Stretch Bitmap No C Yes 21 Location Position RE
27. button is used to add a point to the water level o The Delete Point button is used to delete a point on the water level o At the bottom of the form there are buttons to move to the first water level move to the previous water level move to the next water level move to the last water level add a water level and delete a water level WinFence User 5 Guide 111 Cross section Data Location Map The map extents of the location map at the bottom of the cross section can be adjusted using the Location Map menu item on the Edit or Popup menus When this menu item is selected the Map Extents form below is displayed Map extents M 4 Min Horizonal Value 80895 Horizonal Value 30835 5 Min Vertical Value 25030 Vertical Value 37670 Cancel Help The following information can be edited on this form Min Horizontal Value This sets the left boundary of the map extents to be displayed Max Horizontal Value This sets the right boundary of the map extents to be displayed Min Vertical Value This sets the lower boundary of the map extents to be displayed Max Vertical Value This sets the upper boundary of the map extents to be displayed 112 WinFence User 5 Guide Saving Cross Section Saving a Cross Section To save the cross section either select the Save Cross Section menu item from the File menu or click on the Save button on the Cross Section toolbar The cross se
28. button on the toolbar is used to create the Bitmap the program will fill in the position oth erwise the user will have to enter in the position WinFence User 5 Guide 51 Projects Location Map Setup Button The Location Map setup button allows the user access to the setup preferences of the location map Clicking on the button opens up the Location Map Preferences Form There are five tabs on this form Scale Units tab Grid Map tab Axis tab Fence Line tab DXF tab Scale Units Tab The Scale Units tab shown below controls the scale type scale input units and display units of the location map What is a map scale To make a map useful mapmakers establish and indicate a consistent relationship between size on the map and size in real life This relationship 1s the map scale For instance a map may use one inch to represent what is actually 24 000 inches on earth Mapmakers express scale as a mathemat ical ratio or fraction The unit on the map is expressed as the number one numerator A scale of 1 24 000 would be read as one to twenty four thousand We cannot easily visualize a value such as 24 000 inches so maps usually not only show the scale ratio but convert the ratio to units of measurement For example a 1 24 000 map can also be expressed as 1 inch 2000 feet or about four tenths of a mile IS Location Map Setup Grid Axis Fence Line Scale Setting Location Map Scal
29. click the New button on the Location or Cross Section toolbars or by selecting the New Cross Section menu item from the File menu The New Section Toolbar shown on the next page will be displayed 24 WinFence User 5 Guide Creating a New Cross Section New Section Bar To begin drawing the pathline of the new cross section click the Line button on the New Section toolbar The cursor will then change to a cross hair Click on the location of the starting point of the cross section and then click on each point of the pathline Only the points where the pathline bends need to be clicked At the last point on the path line double click the left mouse button The pathline will be highlighted in green as shown below All of the wells within the pathline area will be used in the cross section 1100 1200 1300 i 1600 1700 1800 1100 i i j i 1600 i 1800 WinFence User 5 Guide 25 To create the cross section along the selected path click on the Ok button on the New Sec tion toolbar The Enter Cross section Name form shown below will be displayed Enter a unique name for the new cross section and then press the Ok button Minter Cross Section nl xl Existing Cross Sections Cross Section Name X 2 Hep Before the cross section can be displayed a template must be selected the Select Template form below will be displayed after you spe
30. created To edit the legend either click on the legend or select the Legend menu item from the Edit or Popup menu The Template Legend form on the next page will be displayed This form has two tabs one for the Layout and one for the Strata 134 WinFence User 5 Guide Legend Template Legend Layout Strata Show Legend Color Title Legend 28 Title Font N Line Stie Y 5 85 Show Strata Names Name Font Border Position Number of Columns 3 Column Width 1 12 Symbol Height 15 Symbol Width 15 X Cancel Help Layout Tab The following information can be specified on the Layout tab shown above Show Legend Check to show the legend on the page If not checked no legend will be shown and the information below will not be displayed Title This is the optional title of the legend up to 255 characters Title X This is the horizontal position of the title in inches or millimeters from the left side of the page The units of measurement are set in the page layout Title Y This is the vertical position of the title in inches or millimeters from the top of the page Title Font This is the font to use for the legend title When the Title Font button is pressed a Font form will be displayed This form can be used to select the type face size and color of the font Show Strata Names Check to show the names of the strata in the legend as well as their descrip tions WinFence User 5 Guide 135
31. database is maintained by the program to track the sta tus and locations of projects This database contains the project number name and directory location WinFence is compatible with Windows 2000 NT and XP and supports all of the fonts monitors and printers available in Windows WinFence User Guide Features The WinFence program has numerous features to make the entry edit ing and printing of cross sections and fence diagrams easier and faster In addition the use of a standard database format means that the data is readily available to other applications New Features Fence diagrams can be generated displayed and printed in 3D Strata in cross sections can be automatically generated by the pro grams built in intelligence Position of the user and light source can be dynamically moved in the 3D fence diagram Graphical Information System GIS for displaying and picking bore holes and cross sections in Winlog with Winfence GIS can also display site features and import AutoCAD files ntersecting cross sections can be displayed on a cross section ntersecting cross sections can be used when automatically gener ating a new cross sections Deviated boreholes can be displayed on a cross section Multiple water levels can be drawn on the cross section The first water level can be drawn automatically using the water levels stored in WinLoG The features wells grid lines etc shown on th
32. discusses how to use the various toolbars and menus Starting WinFence To begin working with WinFence after you have installed the program start it by double clicking on the WinFence icon in the WinFence application group When you first start the program a form will be displayed as shown below After selecting an option and completing any additional forms the main WinFence screen will be displayed What Would You Like To Do Do not show this screen again The main window of the WinFence program consists of a title bar menu bar optional toolbars and desktop In addition popup menus can be displayed by clicking the right mouse button This sec tion explains how to interact with the various parts of the WinFence program If you do not want the Startup form displayed every time you start the program click on the Do not show this screen again box at the bottom of the form This form can be turned back on using program preferences 8 WinFence User 5 Guide Using WinFence Menu Bar The menu bar contains the main level of commands It uses standard Windows pull down menus You can choose any menu item on any submenu that is not dimmed WinFence will know when certain menu commands are not available and prevents you from choosing them The majority of these commands can also be selected using the speed buttons on the toolbars see below When the program is first started and no cross sections or templates are opened
33. generating a Cross Section 95 Drawing Pathlines 95 Opening a Cross Section 97 Editing a Cross Section 98 Selecting Strata 99 Adding Strata 99 Editing Strata 104 WinFence User s Guide Drawing Order Legend Title Bar size tees Scales Borehole Well Columns Paragraph Text Bitmaps Lines Polylin s s ocio lug Rectangles Intersecting Cross Sections Water Levels Location Map Saving a Cross Section Printing a Cross Section Changing the Template Chapter 5 Fence Diagrams Creating a Fence Diagram Modifying the Display Using Cameras Positioning Cameras Using a Light Source Changing the Borehole Size Changing the Grid Elevation Changing the Grid Extents Zooming In Zooming Out Changing the Template Printing a Fence Diagram Saving a Fence Diagram Display Closing a Fence Diagram WinFence User Guide 111 112 113 116 119 121 122 124 125 128 129 129 130 135 135 136 136 137 138 138 138 139 139 140 140 141 Chapter 6 Templates Creating a New Template 145 Opening a Template 147 Editing a Template 147 THUG Bare i eie 147 Legend sx E 150 Cross Sect
34. has two tabs one for the description and one for the symbol 172 WinFence User 5 Guide Editing a Library Symbol Descriptions i Symbol T Arial lfa z amp M 4 Jf OK Cancel Help The buttons at the bottom of the form are used for the following 4 The Start button displays the first symbol The Previous button displays the previous symbol P The Next button displays the next symbol b The End button displays the last symbol WinFence User 5 Guide 173 Libraries Description Tab The Description tab shown on the previous page is used to enter and edit the description for the symbol There is no limit to the length of the description At the top of the tab there is a Rich Text toolbar used to format the description add symbols and perform spell checking T Arial 112 zim aa gg The use of the Rich Text toolbar is described below Before selecting a speed button the text to be modified should be selected with the mouse or the cursor should be placed at the desired insertion point RA The Font Typeface box is used to select the name of the font to use for the selected text The Font Size box is used to set the size of the font for the selected text m 2 The Font Color box is used to select the color of the font for the selected text B Bold button is used to toggle the bold attribute of the selected text on an
35. i If this is the first time the boundary has been specified the Create New Segment form will not be displayed The cursor will then change to a cross hair Enter the first point on the boundary and then draw the rest of the boundary using the left mouse button There is no limit to the number of points that can be specified The start and end points of the boundary must be on either a cross section boundary or another strata When you are finished drawing the boundary either double click the left mouse button or select Done from the Edit Strata popup menu When drawing a boundary it is possible to draw part of the boundary and then snap to another existing strata boundary To snap to an existing boundary double click the left mouse button on the strata boundary The remaining part of the boundary will then be formed from the snapped bound ary Snapping to a portion of another boundary can be used to quickly draw pinchouts and unconformi ties 90 WinFence User 5 Guide Editing Strata Add Points Additional points can be added to an existing boundary by selecting the Add Points menu item of the Edit Strata popup menu If the current strata has a top and bottom boundary you will also need to select which boundary you are specifying If the boundary has more than one segment the cur sor will change to a hand and you will need to select which segment to use of the existing points on the boundary segment will be highlighted with a box
36. in the second column To select the type of data click on the arrow at the right Column 3 This is the type of borehole data to display in the third column To select the type of data click on the arrow at the right Width This is the width of either column 1 2 or 3 specified in the same coordinates as the scales For example if the horizontal scale is 5 m cm a column width of 10 would be 2 cm wide on the page 142 WinFence User 5 Guide Cross Section Border This is the style of the line used to draw the border around either column 1 2 or 3 When the Border button 1s pressed a Line Properties form will be displayed This form can be used to specify the line width color and style Name When the column data type is specified as graph well or geophysical log the name is used to specify which data to plot in the column This 1s useful when the borehole logs contain multiple graphs wells or geophysical logs and you want to specify which one will be plotted If the name is left blank the first graph well or geophysical log in the borehole will be plotted If the column data type 15 double graph or double geophysical log there will be two name fields One for the first graph or log and one for the second graph or log When specifying the Name it must match exactly what is in WinLoG Borehole ID Label This is used to specify the position of the borehole ID labels on the cross sec tion The labels can be placed at either the top
37. look for help topics listed by keyword Search can be used to search for a specific help topic by one or more keywords The buttons at the top of the Help form are used for the following Hide is used to hide the tabs on the left side of the form Back displays the previous help topic if any Print is used to print the current help topic Options is used to change the preferences for the Help system WinFence User 5 Guide 183 Getting Technical Support GAEA offers a variety of services to help you with your questions and problems You will be auto matically registered when you obtain an unlock code for the program Free technical support to registered users includes assistance in the use of the software and in getting any bugs you may find in the software fixed There are several ways you may contact technical support as discussed below In version 2 an automated technical support option has been added This is our preferred method since it provides us with the maximum amount of information to assist you Automated Technical Support In version 2 you can now send cross sections templates and databases to GAEA for technical support automatically within the program without having to first save them as exchange files To send the information to technical support select the Email Section Template menu item from the Help menu The Email Support form below will then be displayed lil Email Technical Support Sen
38. made the active camera Removing a Camera eb To remove a camera from the Scene Map first select the camera by double clicking on it and then click on the Remove Camera button on the Fence Diagram toolbar Positioning Cameras The position and angle of the camera control how the fence diagram is viewed There are three components to the position of the camera user horizontal vertical and the tilt of the camera user s head The horizontal position can be adjusted by clicking on the camera to make it the active camera and them moving it with the mouse When the camera 15 the active camera it will become red with red cross hairs As the camera is moved away from the fence diagram the fence diagram will become smaller and the opposite will happen when it is moved towards the fence diagram The vertical position and tilt of the camera are controlled by two sliders at the bottom of the Scene Map The use of these sliders is described below 120 WinFence User 5 Guide Modifying the Display Using the Vert Pos Slider vert Pos 1337 The vertical position of the camera user is controlled by the Vert Pos slider at the bottom of the Scene Map To adjust the vertical position click on the slider triangle and move it left for down or right for up On the right side of the slider the vertical position of the camera in template units above positive or below negative sea level is indicated Using the Tilt Slider Tit 0 0 Ww
39. of the page If Stretch Bitmap is set to Yes this field will not be displayed If the Bitmap button on the toolbar Is used to add the bitmap this field will be filled in by the program Sizing and Moving Bitmaps The size and position of the bitmap text can be changed using the Bitmap Information form or the mouse To adjust the size using the mouse click on a border and drag it to its new location To move the bitmap text position the mouse in the center of the bitmap and drag it to its new loca tion 158 WinFence User 5 Guide Lines Lines Horizontal vertical and diagonal lines and arrows can be added anywhere on a template There 1s no limit to the number of lines and arrows that can be added Adding a Line There are two methods that can be used to add a line or arrow to a template 1 By clicking on the Line button on the Toolbar Next using the left mouse button click on i the location of the starting point of the line or arrow Then while holding down the left mouse button drag the cursor to the end of the line or arrow and release the mouse button The Edit Lines form described in the next section will then be displayed 2 By selecting the Lines menu item from the Edit menu or Popup menu and then clicking on the Add button on the form The Edit Lines form described in the next section will then be displayed Using this method the location of the line must be specified on the form Editing a Line Existing lines
40. of the use or inability to use the prod uct or any breach of a warranty and the Distributor shall have no responsibility except to replace the Licensed Product pursuant to this limited warranty General 1 The laws of the Province of Ontario Canada shall govern the validity interpretation and performance of this License Agree ment 2 If any provision of this License Agreement is determined to be invalid under any applicable statute of rule of law it shall be deemed omitted and the remaining provisions shall continue in full force and effect 3 The entire agreement between the Distributor and the Licensee is embodied in this Agreement 4 Any modifications of this License Agreement shall be void unless appearing in writing signed by duly authorized representatives of the License and the Distributor 5 This License Agreement shall be binding upon and shall inure to the benefit of each party hereto and its successors and assigns except that any assignment of this License Agreement by the Licensee without the written consent of the Distributor shall be void Contents Introduction Features v a E V Chapter 1 Getting Started The Distribution Package 2 Required Equipment 2 Installing WinFence 3 Requested Information 3 Network Installation 4 README File 4 Uninstalling WinSieve 4 Registering and Unlocking WinFen
41. points by a straight line and a value of five will fit a smooth curve between the points not necessarily going through each point A value of two 1s recommended which will connect the points by a curve that goes through each point Dictionary This is the dictionary to use when performing spell checking One of the following dictionaries can be selected American British Dutch English French German Italian and Spanish Selected Strata Outline This the style of the line used to draw the boundaries of the currently selected strata The style of the line can be changed by pressing the Line button to the right Automatic Updates When this box is checked the program will automatically check and install updates to the program from the Internet If you have an Internet connection to your computer it 1s recommended that this box be checked 70 WinFence User 5 Guide Setting Program Preferences Section Generation Tab Directories Scales Auto Backups Other Section Generation Fence Diagrams Intersecting CrossSection Generate Intersecting CrossSections Cross Section Creation Auto Generate Strata Use Intersecting CrossSections Use Auto generated Strata Message Cancel Help The following parameters can be set the Section Generation tab Generate Intersecting Cross Sections When this box is checked any intersecting cross sections will be shown on a cro
42. polygon then left click there as well The user can continue to add points to their polygon until all points have been added Then to finish the polygon simply click the right mouse button Once this is done the program will open the Edit Polygons form on the next page The following can be edited on this form Point Coordinates All point coordinates are in true grid coordinates 1283 N 284 E is 1283 284 in meters or feet Points can be added or deleted using the Add and Delete buttons on the right side of the coordinates Line Style Clicking the Line Style button opens a Line Properties form on which the user can user select the Line Style Solid Dashed Dash Dot etc thickness and color of the line 46 WinFence User 5 Guide Using the GIS Interface Edit Polygons 315 40 314 11 279 42 298 37 334 35 329 85 318 29 331 46 ane n Line Style Fil Color IN lt Le Lal ap es Cancel Help SU Fill Style Clicking the Fill Style button opens a Color form on which the user can user select the color of the polygon X2 Polyline Button The Polyline button allows the user to place a polyline anywhere on the location map To draw a polyline click on the polyline tool button then click the left mouse button at the first point of the polyline Move the cursor to the second point of the polyline then left click there as well The user can continue to add points
43. pressing the Select Directory button to the right of the input line Bitmap Directory This is the directory where the bitmaps for lithologic symbols are stored This directory should only be changed if these symbols have been moved To change the directory specify the directory name in the input line or press the Select Directory button to the right Default Directory This is the initial directory used when importing and exporting data Temporary Directory This 15 the directory where temporary files are stored These files are cre ated by the undo process WinLoG Program This is the location of the WinLoG program It is used when you double click on a borehole log in a cross section to open the log in the WinLoG program If you do not have access to the WinLoG program this field can be left blank 66 WinFence User 5 Guide Setting Program Preferences Scales Tab Other Section Generation Fence Diagrams Directories Scales Map Auto Backups Horizontal Lenath Scale fi 0 Vertical Depth Scale Units m cm ha X Cancel Help The following parameters can be set on the Scales tab Horizontal Length Scale This is the default horizontal scale using the same units as specified below In the form shown above the horizontal scale is 10 m cm Vertical Depth Scale This is the default vertical scale using the same units as specified below In the form shown above the vertical scale is 1 m cm Units T
44. scale of the cross section The vertical and horizontal scales do not need to be the same Typically cross sections have some degree of vertical exaggera tion WinFence User 5 Guide 141 Templates Borehole Tab Up to three vertical columns containing borehole data can be displayed on the cross section at the location of each borehole This data is retrieved from the WinLoG database for the project when the cross section is created x Horizontal Axis Vertical Axis Scales Borehole Position Intersecting Cross Sections Column 1 Column 2 Column 3 Width 50 lt Border F Width fi 0 lt I Width IL 00 Sy Border Borehole ID Label Well Symbols Elevation Labe Top C Top Size 0 x Top Bottom Font Bottom C Bottom Font C None G Noe gt C None x Cancel Help The Borehole tab shown above is used to enter the following information Column 1 This is the type of borehole data to display in the first column To select the type of data click on the arrow at the right The data can be either none lithology graph bar graph double graph geophysical log double geophysical log well sample type SPT water content or a bar If the data type is specified as a bar a vertical bar will be drawn at the location of the column using the color of the border line Column 2 This is the type of borehole data to display
45. should be used with caution since if incorrect serial numbers are entered you will lose the registration on both computers If this happens contact GAEA for a new unlock code Transferring the registration is a two step process Step 1 The first step is to obtain the unique serial number of the new computer Install and run WinFence on the new computer Initially the program will start in Demo mode and the Demo form will be displayed Press the Register button and write down the unique serial number for the new computer Step 2 In the second step the Transfer utility is used to generate an unlock code for the new com puter Start WinFence on the old PC and select the Transfer menu item from the Help menu The Transfer Registration form below will be displayed Enter the serial number of the new computer and then press the Transfer Registration button An unlock code for the new computer will be dis played Enter this unlock code in the Registration form on the new computer and then press the Store Unlock Code button Transfer Registration Serial Number of Current Computer 21 67766792 Serial Number of New Computer Transfer Registration Unlock Code After the Transfer Registration button has been pressed WinFence on the old PC will be set to run in demo mode WinFence User 5 Guide 7 Getting Started Using WinFence This section explains how to interact with the various parts of the WinFence program It
46. to close symbol library Ig The Save button is used to save changes to the symbol library amp The Print button is used to print the symbol library 18 WinFence User s Guide Toolbars Desktop The desktop 1 used to display numerous child windows These child windows can contain cross sections templates and symbol libraries The data is displayed graphically and you can add new data or edit existing data by clicking on the data in the window Each child window has the standard Windows icons for minimizing maximizing and closing the window When a child window is minimized an icon for the window will be displayed at the bot tom of the desktop The display of the child windows can also be adjusted using the Window com mand on the menu bar WinFence User 5 Guide 19 Getting Started 20 WinFence User 5 Guide Tutorial 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250 1300 1350 1400 Project Tutorial Project Number 2000 001 GAEA Technologies 44 Canadian Oaks Dr Drawn By M Fraser Whitby ON LIN 6W8 Date 11 02 2000 CANADA Scale Bar Tutorial Cross sections are used to depict the vertical structure and stratigraphy of the subsurface Typically cross sec tions intersect several boreholes that may or may not be along a straight line The stratigraphic information from the boreholes is combined with other knowledge of
47. to their polyline until all points have been added Then to finish the polyline simply click the right mouse button Once this is done the program will open the Edit Polyglines form on the next page The following can be edited on this form Point Coordinates All point coordinates are in true grid coordinates 1283 N 284 E is 1283 284 in meters or feet Points can be added or deleted using the Add and Delete buttons on the right side of the coordinates Line Style Clicking the Line Style button opens a Line Properties form on which the user can user select the Line Style Solid Dashed Dash Dot etc thickness and color of the line WinFence User 5 Guide 47 Projects Edit Polylines 578 05 Point 2 600 53 242 17 Point 3 546 25 215 51 537 26 249 88 X dar Sy Line Style Ma n cX X Cancel Help Paragraph Button To add a Paragraph Text box to the location map click on the Paragraph button on the Toolbar Next using the left mouse button click on the location of the upper left corner if the paragraph textbox Then while holding the left mouse button down drag the mouse to the location of the lower right corner After the button has been released the Paragraph Text form will be displayed Paragraph Text T Arial zm 1 Background te Frame Yes Frame Width fi zi gt Frame Color m X Cancel Help
48. transfer cross section data and templates between projects or to other companies The data in these files is stored as ASCII text Cross section data exchange files have the extension sec and template exchange files have the extension ftm After the data has been exported from another project it can then be imported into the current project 58 WinFence User 5 Guide Exporting Data To import an exchange file select either the Template or Cross Section menu item from the Import submenu The Import form below will be displayed Select the file to import and press the Open button If no project is currently open the Cross Section menu item 1s disabled Import Exchange Template File Look in G ek E Bitmaps Ivetric ftm Filename Metic ftm Files of type Exchange Template Files Cancel Exporting Data Cross sections and templates can be exported for use in other programs using the Export submenu Cross section data and templates can be exported to exchange files the clipboard in bitmap for mat a bitmap file or an enhanced metafile Exchange Files Exchange files are used to transfer cross section data and templates between projects or to other companies The data in these files is stored as ASCII text Cross section data exchange files have the extension sec and template exchange files have the extension ftm After the data has been exported from another project it can then be imported
49. wells and intersecting cross sections the program looks at the simi larities in the lithologies thicknesses and occurrence of the strata This methodology works well with most geologies except where the geology is very complicated or there are faults In addition the program s AI will not be able to determine alteration zones However these zones can be added and the strata can be edited after the cross section has been generated In this tutorial we will use the auto generated strata and then edit some of the strata The cross section with the auto generated strata is shown on the next page For a detailed description on how to add new strata and edit strata see Chapter 4 The three boreholes that were included in the cross section are displayed at the top of the section and the two intersecting cross sections BB and CC are displayed at the bottom of the section WinFence User 5 Guide 27 2x8 Ehuatio Entering Title Bar Data The title bar is used to display general information about the cross section This can include infor mation such as project name and number location date etc There is no limit to the number of data items that can be displayed New and edited data up to 255 characters can be entered on the input lines to the right of the data type The types of data and their positions in the title bar are controlled by the template Chapter 6 con tains a detailed description on how to mod
50. will result in the symbol being doubled in size The fill size must be greater than 0 Foreground Color This is the color to use for the shaded parts of the symbol The foreground color can be changed by pressing the Foreground Color button When this button 1s pressed a Color form will be displayed This form can be used to select a basic color or specify a custom color Background Color This is the color to use for the unshaded parts of the symbol The foreground color can be changed by pressing the Foreground Color button When this button is pressed a Color form will be displayed This form can be used to select a basic color or specify a custom color Boundary Tabs The Boundary Tab shown on the next page can be used to enter and edit the points that are used to create the boundaries of the strata The number of tabs depends upon the type of strata currently selected Layers have a top and bottom boundary Faults lenses alteration zones and intrusions have only one boundary These boundaries do not need to be entered on these tabs they can also be picked using the mouse as discussed in the Editing Strata section below 86 WinFence User 5 Guide Adding Strata Strata Data Name Fill Top Boundary Bottom Boundary Segment 1 Use Strata X J OK The following information can be specified in the Boundary tabs Segment This is the current segment of the boundary Strata can have multiple segments allowing
51. 56 03 PM 11 8 2004 5 06 03 PM 11 8 2004 5 16 03 PM 11 8 2004 5 26 03 PM 11 8 2004 5 36 03 PM 11 8 2004 5 46 03 PM 11 8 2004 5 56 03 PM 11 9 2004 10 20 09 4M 11 9 2004 10 30 09 4M JS OK File Name 38299 691705544_WinFencel winfence bak 38299 6986501 736_WinFencel winfence bak 38299 7055942477_WinFencel winfence bak 38299 7125386921_WinFencel winfence bak 38299 7194833218_WinFencel winfence bak 38233 726427581 WinFencelwinfence bak 38299 7333720255_WinFencel winfence bak 38299 7403166551_WinFence winfence bak 38299 7472610995_WinFencel winfence bak 38300 4306652083_WinFencel winfence bak 38300 4376096528_WinFencel winfence bak Cancel WinFence User 5 Guide 63 Projects Select the database you wish to restore and then press the Ok button The project database will then be restored Restoring the Project List Database To restore a backup of the Project List Database select the Project List menu item from the Restore Backup Database submenu A confirmation form will be displayed select yes to continue and the Select Backup Database form will be displayed The Select Backup Database form lists all the backup databases for the project list database The date time information indicates the date and exact time at which the project list database was backed up Select the database you wish to restore and then press the Ok button Restoring the Main Database To restore a backup of the Main Databa
52. Axis Fence Line DXF Grid and Location Map Map Defaults Grid Defaults Show Location Map Show Grid No Yes C No Yes Min Horizonal Value 363 6000 Horizontal Spacing fio Max Horizonal Value 617 4000 Vertical Spacing fio Min Vertical Value 153 1999 Max Vertical Value 361 7999 Cancel Help WinFence User 5 Guide 53 Projects The following information can be entered and edited using this tab Show Location Map This radio button allows the user to turn the location map on or off Min Horizontal Value This is the position of the left border of the location map in real grid coor dinates of either feet or meters The units of measurement are specified on the Units tab Max Horizontal Value This 15 the position of the right border of the location map in real grid coordinates of either feet or meters The units of measurement are specified on the Units tab Min Vertical Value This is the position of the bottom border of the location map in real grid coordinates of either feet or meters The units of measurement are specified on the Units tab Max Vertical Value This is the position of the top border of the location map in real grid coordi nates of either feet or meters The units of measurement are specified on the Units tab Show Grid This is used to turn the grid on and off Horizontal Spacing This is the spacing between horizontal grid lines as shown on the location map in real grid coord
53. C Program Files GAEASD atabase S amples WinFence2 WinFence Example 2 C Program Files GAEA D atabase WinFencr M 4 M X Cancel Help Select the project to be deleted and then press Ok Note that once a project is deleted the data can not be recovered WinFence User 5 Guide 57 Projects Importing a Project Existing projects can be imported by selecting the Import Project menu item of the Projects sub menu When selected the Import Project form below will be displayed Import Project Project ID Project Name Directory k x Cancel Help This form can be used to specify the following information Project ID A unique project number up to 100 characters The name cannot contain any of the following characters amp When importing a project it is very important that the correct Project ID be specified The Project ID is used to determine the name of the database file to be imported For example if the Project ID is 98020 then the name of the database file to import would be 98020winfence mdb Project Name The name of the project Directory The directory to be used to store the project database tables up to 255 characters This directory can be on a local computer or a network server This option should be used to import projects that have been previously created but are not included in the Master Project database Importing Data Exchange files are used to
54. Center X This is the horizontal position of the center of the north arrow in real grid coordinates either feet or meters If the North Arrow button on the toolbar is used to create the north arrow the program will fill in the position otherwise the user will have to enter in the position Center Y This 15 the vertical position of the center of the north arrow in real grid coordinates either feet or meters If the North Arrow button on the toolbar is used to create the north arrow the program will fill in the position otherwise the user will have to enter in the position Width This is the width of the north arrow in real grid coordinates either feet or meters If the North Arrow button on the toolbar is used to create the north arrow the program will fill in the position otherwise the user will have to enter in the position Height This is the height of the north arrow in real grid coordinates either feet or meters If the North Arrow button on the toolbar is used to create the north arrow the program will fill in the position otherwise the user will have to enter in the position El Bitmap Button To add a bitmap click on the Bitmap button on the toolbar Next using the left mouse button click on the location of the center of the bitmap The Open Bitmap File form will then be displayed select the bitmap file and then press the Open button The Bitmap Information form on the next page will then be displayed 50 WinFence User 5 Guide
55. Fence User 5 Guide 13 Getting Started Scale Bar used to edit the position and format of the scale bar Location Map used to edit the layout and format of the location map Eu Paragraph Text used to add edit and delete paragraph text Tille Bar Bitmaps used to add edit and delete bitmaps on the template Legend Lines used to add edit and delete lines and arrows on the template Cross Section Rectangles used to add edit and delete rectangles on the template Scale Bar Location Map Paragraph Test Bitmaps Symbol Library Popup Menu lines Rectangles If a symbol library is currently displayed on the desktop the Symbol Library Popup Menu will be displayed This popup menu contains the following commands Save saves the symbol library Save Close closes the symbol library Close Print prints the symbol library Print Lithologic Symbols used to edit the lithologic symbols Lithology Symbols Toolbars There are four toolbars that can be displayed on the desktop they are the Project Toolbar Cross Section Toolbar Template Toolbar and Symbol Library Toolbar The display of the four toolbars is controlled in the View menu 5 OS ot el 2 9 5 Ala E DG e ES 14 These toolbars can either float over top of the desktop or be docked to the top side or left side of the desktop To make the toolbar float click and hole down the left mouse button on the edge of th
56. If the Line button on the toolbar 1 used to create the line this field will be filled in by the program End Y This is the vertical position of the end of the line in inches or millimeters from the top of the page If the Line button on the toolbar is used to create the line this field will be filled in by the program Line Style This is the style of the line The line style can be changed by pressing the Line Style button A Line Properties form will be displayed Using this form the style color and width of the line can be set Arrowhead To display an arrowhead at the start or end of the line select yes Arrow Position This is position to place the arrowhead either at the start or end of the line If no arrowhead is selected above this field will not appear Arrowhead Size This is the size of the arrowhead If no arrowhead is selected above this field will not appear 160 WinFence User 5 Guide Rectangles Rectangles Rectangles can be added anywhere on a template There is no limit to the number of rectangles that can be added Adding a Rectangle There are two methods that can be used to add a rectangle to a template 1 By clicking on the Rectangle button on the Toolbar Next using the left mouse button click on the location of the upper left corner of the rectangle Then while holding down the left mouse button drag the cursor to the lower right corner of the rectangle and release the mouse but ton The Edit R
57. The Line button is used to draw a straight line on the symbol When pressed the cursor will change to a pencil To draw a line press and hold down the left mouse button at the start of the line Move the mouse to the end of the line and release the mouse button The Rectangle button is used to draw a hollow rectangle on the symbol When pressed the cursor will change to a cross To draw a rectangle press and hold down the left mouse button at the upper left corner of the rectangle Move the mouse to the lower right corner of the rectangle and release the mouse button ui The Filled Rectangle button is used to draw a filled rectangle on the symbol When pressed the cursor will change to a cross To draw a rectangle press and hold down the left mouse button at the upper left corner of the rectangle Move the mouse to the lower right corner of the rectangle and release the mouse button The Ellipse button is used to draw a hollow on the symbol When pressed the cursor will change to a cross To draw an ellipse press and hold down the left mouse button at the upper left corner of the ellipse Move the mouse to the lower right corner of the ellipse and release the mouse button The Filled Ellipse button is used to draw a filled ellipse on the symbol When pressed the cursor will change to a cross To draw an ellipse press and hold down the left mouse button at the upper left corner of the ellipse Move the mouse to the lower r
58. The size and position of the paragraph text can be changed using the Paragraph Text form or the mouse To adjust the size using the mouse click on a border and drag it to its new location To move the paragraph text position the mouse in the center of the paragraph and drag it to its new location Bitmaps Bitmaps contained in Windows bitmap BMP files can be added anywhere on a template These bitmaps can be used to show company logos site plans and other graphical information Bitmaps are displayed over top of any information on the template There 1s no limit to the number of bitmaps that can be displayed Adding Bitmaps There are two methods that can be used to add a bitmap to a template 1 Click on the Bitmap button on the Toolbar Next click on the location of the center of the Ux bitmap After the button has been released the Open form shown below will be displayed Select the bitmap file and then press the Open button 2 By selecting the Bitmaps menu item from the Edit menu or Popup menu and then clicking on the Add button on the form The Open form on the previous page will then be displayed Select the bitmap file and then press the Open button Using this method the location of the bitmap must be specified on the form as described below Editing Bitmaps Existing bitmaps can be edited by selecting the Bitmaps menu item of the Edit or Popup menus or by clicking the left mouse button inside the bitmap on the template The Bitm
59. ack ground Color button is pressed a Color form will be displayed Using this form a basic color can be selected or a custom color can be specified Frame Select yes to display a frame around the paragraph text Frame Width This is the line width of the frame around the paragraph text If no frame is selected above this field will not be displayed Frame Color This is the color of the frame to display around the paragraph text When the Frame Color button is pressed a Color form will be displayed Using this form a basic color can be selected or a custom color can be specified If no frame is selected above this field will not be dis played Sizing and Moving Paragraph Text The size and position of the paragraph text can be changed using the Paragraph Text form or the mouse To adjust the size using the mouse click on a border and drag it to its new location To move the paragraph text position the mouse in the center of the paragraph and drag it to its new location WinFence User 5 Guide 99 Cross section Data Bitmaps Bitmaps contained in Windows bitmap BMP files can be added anywhere on a cross section These bitmaps can be used to show company logos site plans legends and other graphical infor mation Bitmaps are displayed over top of any information on the cross section There is no limit to the number of bitmaps that can be displayed Adding Bitmaps There are two methods that can be used to add a bitmap box to
60. ad To display an arrowhead at the start or end of the line select yes Arrow Position This is position to place the arrowhead either at the start or end of the line If no arrowhead is selected above this field will not appear Arrowhead Size This is the size of the arrowhead If no arrowhead is selected above this field will not appear 104 WinFence User 5 Guide Polylines Polylines Polylines open polygons composed of multiple line segments can be added anywhere on a cross section There is no limit to the number of polylines that can be added Adding a Polyline There are two methods that can be used to add a polyline or arrow to a cross section gt 1 By clicking on the Polyline button on the Toolbar Next using the left mouse button click on the location of the starting point of the first line segment Then while holding down the left mouse button drag the cursor to the end point of the first line segment and release the mouse button Continue to add the other line segments the same way After the end point of the last line segment had been added either click the right mouse button or double clicking the left mouse but ton The Edit Polylines form described in the next section will then be displayed 2 By selecting the Polylines menu item from the Edit menu or Popup menu and then clicking on the Add button on the form The Edit Polylines form described in the next section will then be dis played Using this method t
61. ales and elevations select the Scales menu item form the Cross Section Popup or Edit menu The Cross Section Scales form below will be displayed Cross Section Scales Top Elevation BestFit Bottom Elevation Best Fit Scales Horizontal Length Scale 8 652 Units v Vertical Depth Scale 6 269 Scale Bar Length 25 x Cancel Help The Cross Section Scales form can be used to specify the following information Elevation Units These are the units to use for the top and bottom elevations The units can be feet or meters Top Elevation This is the top elevation of the cross section If Best Fit is checked the top eleva tion will be calculated by the program based on the elevations of the boreholes in the cross sec tion WinFence User 5 Guide 95 Cross section Data Bottom Elevation This is the bottom elevation of the cross section If Best Fit is checked the bot tom elevation will be calculated by the program based on the elevations and depths of the bore holes in the cross section Horizontal Length Scale This 15 the horizontal scale to use for the cross section When the cross section is created this scale can be calculated by the program or taken from the template Vertical Depth Scale This is the vertical scale to use for the cross section When the cross sec tion is created this scale can be calculated by the program or taken from the template Scale Units These are the units to use for th
62. ame This form is used to select which cross sections to display in the fence diagram at least one cross section must be selected By default all of the cross sections are selected After the cross sections have been selected and the Ok button pressed the Select Template form on the next page will be displayed The Select Template form is used to select the template to format the fence diagram The template can be the same as the cross sections or one setup specifically for the fence diagram After the template has been selected the fence diagram will be displayed WinFence User 5 Guide 117 Fence Diagrams Select Template Templates Default Default Metric Default25 Example 3 No bar Legal Side Bar Side Bar Legal Side Bar Metric M 4 M Cancel The template selected will be remembered by the program and the next time the fence diagram is displayed the Select Template form will not be displayed Help When the fence diagram is displayed the Fence Diagram FD toolbar below will also be dis played The buttons on this toolbar are described in the appropriate sections below mac Hoo Sth 2 118 WinF ence User Guide Modifying the Display Modifying the Display display of the fence diagram can be modified dynamically in several ways It can be zoomed rotated re positioned the light source can be altered the grid can be changed etc of these modi
63. an be created or an existing segment used for this boundary Use Existing Segment If this is the first time the boundary has been specified the Create New Segment form will not be displayed The cursor will then change to a hand Pick the existing strata you wish to use for the boundary using the left mouse button When an existing strata is used for a boundary it is used for the entire boundary of the strata To use only a portion of an existing strata use snapping instead If the boundary of the existing strata to be used had a lense attached to it the lense will form part of the new boundary as well WinFence User 5 Guide 89 Cross section Data Add Boundaries A strata boundary can also be drawn on the cross section using the mouse To draw the boundary select the Add Boundary menu item of the Edit Strata popup menu If the current strata has a top and bottom boundary you will also need to select which boundary you are specifying If the boundary has already been specified and contains multiple segments the Create New Seg ment message below will be shown Select whether to create a new segment or to re specify the boundary of the existing segment If you select to use an existing segment and there is more than one segment you will need to select the segment to use Create New Segment Either a new segment for the strata can be created or an existing segment used for this boundary Use Existing Segment Create New Segment
64. and arrows can be edited by selecting the Lines menu item of the Edit or Popup menus or by clicking the left mouse button on the start or end point of the line The Edit Lines form below will then be displayed Edit Lines Orientation Line Style C Diagonal Arrow Horizontal Arrowhead No C Yes Vertical Position x Y NEM 7 6 End 869 81 M4 nX X Cancel WinFence User 5 Guide 159 Templates The following information can be entered and edited using this form Orientation This is the orientation of the line either diagonal horizontal or vertical If the orien tation is set to horizontal the vertical position will be set to the y position of the start of the line If the orientation 1 set to vertical the horizontal position will be set to the x position of the start of the line Start X This is the horizontal position of the start of the line in inches or millimeters from the left side of the page If the Line button on the toolbar is used to create the line the program will fill in this field The units of measurement are specified in the page layout Start Y This is the vertical position of the start of the line in inches or millimeters from the top of the page If the Line button on the toolbar is used to create the line the program will fill in this field End X This is the horizontal position of the end of the line in inches or millimeters from the left side of the page
65. ap Information form on the next page will then be displayed The following information can be specified on this form 156 WinFence User 5 Guide Bitmaps Paragraph Text T Arial i11 E B 7 U Border Position As pee fain I GAEA Technologies Cross Section Profile Background Color No C Yes e JA Cancel Help File Name This is the name of the bitmap file to display on the template To change the name of the file click on the button to the right of the name If the button to the right is pressed a Open bitmap file form will be displayed Select the desired file and then press the Open button Stretch Bitmap Select yes to stretch the bitmap to fit within the specified borders If no is selected only the center of the bitmap can be entered for the position If the Bitmap button on the toolbar is used to add the bitmap Stretch Bitmap is set to No Maintain Aspect Ratio Select yes to keep the aspect ratio of the bitmap the same as stored in the file If yes is selected the bottom of the bitmap will be automatically adjusted to maintain the aspect ratio If Stretch Bitmap is set to then this field will not be displayed and it is assumed that the aspect ratio is maintained Left This is the position of the left border of the bitmap in inches or millimeters from the left side of the page If the Bitmap button on the toolbar is use
66. appear on the menu bar The contents of the Edit menu will vary depending on what is currently displayed on the desktop WinFence User 5 Guide 9 Getting Started Cross Section If a cross section is currently displayed on the desktop the edit menu will contain the following commands Strata displays a submenu that 1s used to add edit and delete strata strata 2 Drawing O Drawing Order used to change the order that the strata are olds ied Legend drawn on the cross section Title Bar Legend used to specify which strata are to appear in the leg end Geophysical Log Title Bar used to specify the data for the title bar Paragraph Text Scales used to specify the horizontal and vertical scales and Bitmaps top and bottom elevation Lines Paragraph Text used to add edit and delete paragraph text Rectangles on the cross section Intersecting Cross sections Bitmaps used to add edit and delete bitmaps on the cross Water Level section Location Map Lines used to add edit and delete lines and arrows Rectangles used to add edit and delete rectangles Intersecting Cross sections used to select which intersecting cross sections to display Water Level used to add edit and delete water levels Location Map used to edit the extents of the location map Template If a template is currently displayed on the desktop the edit menu will contain the following com mands
67. ate the cross section all other strata must be added as described in the section below If the auto generate strata option was used the strata will be automatically generated and added to the strata list Any additional strata can then be added as described below Adding Strata New strata can be added to the cross section using either the Add Strata button on the Strata tool bar or the Add Strata menu item on the Select Strata submenu The Add Strata form below will then be displayed Strata Data Add New Project Strata New D Use Existing Project Strata Contaminated Zone ES Sandy Silt Till Clayey Sand Clay Sand Limestone w OK Cancel Either an existing strata definition can be used or a new strata definition can be created The list of existing strata will contain any unused strata in the project The strata for this list are taken from the WinLoG project and any other cross sections in the WinFence project WinFence User 5 Guide 83 Cross section Data If an existing strata in the project is selected the strata will be added to the cross section and the boundaries of the strata can be added as described in the Add Boundaries section below If a new strata 15 selected by pressing the New button the Strata Data form below will be dis played This form had form tabs for specifying the properties of the strata The recommended order for adding strata is Faults 2 Intrusions 3 Layers 4 Lenses 5
68. ayers contamination fossils minerals and hydrocarbons Cross sections are created by specifying the pathline on a location map for the project The location map shows all of the wells entered in Win LoG and any existing cross sections specified in WinFence Pathlines can be straight or bent When the cross section 1 created the strata can be automatically generated using the program s built in intelligence or they can be created manually A wide variety of strata can be used to create cross sections using Win Fence Types of strata that can be used include layers faults lenses intrusions and alteration zones Very detailed and complicated stratig raphy can be represented and easily drawn Layers can contain multiple segments to represent uncomformities and erosion in highly faulted zones A unique snapping approach can be used to add layer alteration zone intrusion and lense boundaries This approach allows the boundary of one strata to be fixed to the boundary of another strata Making the input of strata boundaries quick and accurate Boundaries can be par tially drawn and partially snapped Snapped boundaries can include one or more different strata In addition to snapping strata boundaries can be assigned to the strata above or below The format of the cross section is controlled by a template that can be easily edited and customized Templates are used to specify the format and position of the cross section title bar leg
69. be 980205winfence mdb Typi cally this project would be stored in the subdirectory 1980205 This chapter describes how to Open an existing project Open the last project Use the GIS Interface Close a project Delete a project Import data Export data Manage a project database Backup all data 10 Set project passwords 11 Set program preferences N Opening an Existing Project These tasks can be performed using menu commands on the File menu or buttons on the Project toolbar shown below Projects Cross Sections gt Templates Symbol Libraries Import Export 4 ir 58 8 pn Print Setup Preferences Exit Opening an Existing Project The WinFence program works in conjunction with the WinLoG program to create cross sections and fence diagrams using borehole data that has been previously entered in WinLoG projects must first be created in WinLoG before they can be used in WinFence To work with an existing project you can open it by selecting the Open Project menu item of the Projects submenu or clicking the Open button on the Project Toolbar In addition at the start of the program the Open an Existing Project button can be selected on the Startup Form A list of avail able projects will be displayed in the Open Project Form as shown on the next page The desired project can be selected by clicking on it in the list an
70. border of the rectangle in inches or millimeters from the left side of the page If the Rectangle button on the toolbar is used to create the rectangle this position will be filled in by the program Top This is the position of the top border of the rectangle in inches or millimeters from the top of the page If the Rectangle button on the toolbar is used to create the rectangle this position will be filled in by the program Bottom This is the position of the bottom border of the rectangle in inches or millimeters from the top of the page If the Rectangle button on the toolbar is used to create the rectangle this posi tion will be filled in by the program Line Style This is the style of the rectangle border The line style can be changed by pressing the Line Style button A Line Properties form will be displayed Using this form the style color and width of the rectangle can be set Fill Color This is the color to use to fill the inside of the rectangle When the Fill Color button 15 pressed a Color form will be displayed Using this form a basic color can be selected or a custom color can be specified WinFence User 5 Guide 107 Cross section Data Sizing and Moving Rectangles The size and position of a rectangle can be changed using the Edit Rectangle form or the mouse To adjust the size using the mouse click on a border and drag it to its new location To move the rectangle position the mouse in the center of the rectangle a
71. bottom or not at all Borehole Font This is the font to use for the borehole ID labels When the Borehole Font button is pressed a Font form will be displayed This form can be used to select the type face size color and style of the font Well Symbols This is used to specify the position of the well symbols for the boreholes on the cross section The symbols can be placed at either the top bottom or not at all Well Symbol Size This the size to use for the well symbols Typically between 10 and 20 Well Symbol Color This is the color to use for the well symbols When the Color button is pressed a Color form will be displayed This form can be used to select a basic color or custom color Elevation Label This is used to specify the position of the borehole elevation label The labels can be placed at either the top bottom or not at all Elevation Font This is the font to use for the elevation Customize Graph If the column data type is graph double graph geophysical log or double geophysical log the Customize Graph button will be displayed This button is used to specify the format of the graph in the column When the Customize Graph button is pressed the Customize Graph Columns form on the next page will be displayed WinFence User 5 Guide 143 Templates Customize Graph Columns Titles Scales Show Titles Log Scale G No Minimum 2000 No C Yes Maximum 2500 C Yes Grid Fill Points Show Grid Fill Area
72. button is pressed a Font form will be displayed This form can be used to select the type face size color and style of the font Line Style This is the line style to use for the grid lines When the Line Style button is pressed a Line Properties form will be displayed This form can be used to select the width color and style of the line WinFence User 5 Guide 139 Templates Vertical Axis Tab x Borehole Pasition Intersecting Cross Sections Horizontal Axis Vertical Axis Scales Vertical Axis Title Elevation Left z poa Major Interval 5 V Show Grid Lines Minor Intervat 15 x Cancel The Vertical Axis tab shown above is used to enter the following information Vertical Axis This is used to specify which vertical axes to draw It can be set to none left only right only or both Show Grid Lines If checked horizontal grid lines will be at the specified major interval Title This is the title to use for the axis up to 255 characters Major Interval The major interval determines the interval between grid lines and axis labels The interval 15 specified in the same units specified in the Scales tab Minor Interval This is the tic interval along the axis Scales Tab The Scales tab shown on the next page is used to specify the following information 140 WinFence User 5 Guide Cross Section Cross Section Style X Borehole Position Intersecting Cross Sections Horizo
73. ce 5 Single User Registration 5 Network Registration 6 Transferring the Registration 7 Using WinFence 8 Starting WinFence 8 Men Bar ape secs rd eas 9 Popup Menus 11 Toolbars es de Ens 14 Desktop 19 Chapter 2 Tutorial Selecting a Project 23 Creating a New Cross Section 24 Entering Title Bar Data 29 Entering Strata 30 Selecting Strata for the Legend 45 Saving the Cross Section 47 Printing the Cross Section 47 Chapter 3 Projects Opening an Existing Project 53 Opening the Last Project 54 Using the GIS Interface 55 Editing a Borehole 55 Adding a Cross Section 55 Editing a Cross Section 55 Location Map Toolbar 55 Closing the Project 73 Deleting a Project 73 Importing a Project 74 Importing Data 74 Exporting Data 75 Exchange Files 75 Clipboard 76 Bitmap File 76 Metafile bien 77 Managing a Project Database 77 Compressing amp Repairing 78 Backing up a Database 78 Restoring a Database 78 Setting Program Preferences 80 Chapter 4 Cross Section Data Creating a New Cross Section 92 Auto
74. ce User 5 Guide Deleting a Template Deleting a Template To delete a template from the database select the Delete Template menu item on the File menu The Delete Template form shown below will be displayed Select the template to delete and press the Ok button Delete Template Templates Side Bar Legal Side Bar Metric M 4 M wv OK X Cancel Help WinFence User 5 Guide 165 Templates Setting a Password for the Template It maybe advantageous for some companies to create templates that have a password associated with them In this way accidental editing of templates could be avoided since only employees knowing the password to the template would be able to edit it This type of template password locking 15 accomplished by selecting the Change Template Pass word menu item from the Templates submenu of the File menu The Change Password form on the below will be displayed Change Template Password Current Password New Password Confirm New Password Af OK Cancel Help There are three editable fields on this form These include Current Password The current password of the template If the template doesn t currently have a password then leave this blank New Password The new password of the template If you want to remove the old password then set this to blank Confirm New Password The new password again of the template If you want to remove the old password then set this to blank
75. cify the name of the cross section Select the Bottom Bar template for this tutorial and then press the Ok button For a detailed description of templates see Chapter 6 Select Template i Templates Side Bar Metric M 4 M x Cancel Help The Select Boreholes form on the next page will then be displayed showing which boreholes will be included in the cross section This form can be used to remove boreholes from the cross sec tion In this example we will include all three selected boreholes WinFence User 5 Guide 26 Creating a New Cross Section EEN Select the Boreholes you wish to include in the cross section X Cancel When creating the cross section the program will try to fit the length of the path line within the horizontal length and scale specified in the template If the path of the cross section is too large the form below will be displayed You can select either to have the scales adjusted or to have the cross section cropped at the page boundaries For this tutorial select Yes to adjust the scales Adjust Scales xi AJ Would you like to automatically adjust the scales for this cross section In version 2 there is the option to have the program automatically generate the cross section This is done using artificial intelligence AI built into the program When determining how to connect the strata between boreholes
76. ction 2 Features Getting Started Tutorial Projects Cross Sections Templates 9 Getting Technical Support 2 Database Structure i2 Copyright Notice Piel Es Introduction WinFence can be used to graphically create detailed full color cross sections and fence diagrams quickly and easily The program can be used to interpret and map soil and rock layers contamination fossils minerals and hydrocarbons In version 1 of the program only cross sections can be created The ability to generate fence diagrams will be added in version 2 Cross sections are created by specifying the pathline on a location map The location map shows all of the wells entered in VinLoG and any additional wells specified in WinFence Pathlines can be straight or bent The location map including the pathline can also be shown on the cross section wide variety of strata can be used to create cross sections using WinFence Types of strata that can be used include layers faults lenses intrusions and alteration zones Very detailed and complicated stratigraphy can be represented and easily drawn Layers can contain multiple segments to represent unconformities and erosion in highly faulted zones a WinFence uses the latest type of help system for Microsoft Windows called HTML Help This help sys tem uses a similar style of display as Internet Explorer The Help System can be used
77. ction can also be saved under a new name by selecting the SaveAs button on the Cross Section toolbar The Enter Cross Section Name form below will be shown Enter a unique name for the cross section and then press the Ok button Tli Enter Cross Section Name Existing Cross Sections Cross Section Name corel Printing a Cross Section To print the cross section either select the Print menu item from the File menu or click the Print button on the Cross Section toolbar WinFence User 5 Guide 113 Cross section Data Changing the Template 51 different template can be selected for the cross section using the Change Template button 9 on the Cross Section toolbar The form below will be displayed This form lists the cur rently available templates Select the desired template and then press the Ok button Select Template Templates Side Bar Legal Side Bar Metric 4D M Jf OK Cancel 114 WinFence User 5 Guide Fence Diagrams Diagrams In version 2 of WinFence fence diagrams can now be displayed and manipulated Fence diagrams are used to depict the geology and stratigraphy of the subsurface in 3 dimensions Typically fence diagrams show several cross sections that may intersect as well as boreholes and wells The WinLoG program can be used to create and edit all types of boring and well logs The logs can contain gen eral borehole data lithologic descrip
78. d off J The Italics button is used to toggle the italic attribute of the selected text on and off The Underline button is used to toggle the underline attribute of the selected text on and off Ic The Superscript button is used to toggle the superscript attribute of the selected text on and 8 off As The Subscript button is used to toggle the subscript attribute of the selected text on and off 174 WinFence User 5 Guide Editing a Library The Left Justify button will left justify the selected text The Center Justify button will center justify the selected text The Right Justify button will right justify the selected text The Select button will select all of the text in the description The Cut button will remove the selected text and place it in the clipboard 8 The Copy button will copy the selected text to the clipboard The Paste button will paste the text in the clipboard at the current position of the cursor in the description amp amp The Spell Check button will display the Spell Checker form shown below and will check the spelling the description The dictionary used to check the spelling is set in the program Preferences see Chapter 3 When the Add button is pressed the word will be appended to the cus tom dictionary Spell Checker Not found trest Replace With TET 68 Replace truest P Add Suggestions i D Skip gg Ski
79. d then pressing the OK button The directory that a project is stored in can be changed by clicking on the Edit Directory button This will display a Select Directory form that can be used to select the new directory for the pro ject Changing the directory will not move any of the project files The purpose of this option is to allow for the movement of projects on a network The arrow buttons at the bottom of the list can be used to move the selection to the start of the list the previous record the next record or the end of the list WinFence User 5 Guide 37 Projects Open Project une Nae CompletedT utorial Completed WinLoG Tutorial C Program Files GAEAD atabase Complete WinFence Tutorial WinFence Tutorial C Program Files GAEAD atabase WinFencr WinFence Example 1 C Program Files GAEA D atabase WinFenct WinFence Example 3 C Program Files GAEA D atabase WinFenct WinFence Example 2 C Program Files GAEA Database WinFencr WinLoG Samples C Program Files GAEA Database S amples b Di E dit Directory X Cancel Help Opening the Last Project At the start of the program the last opened project can be selected by selecting the Open Last Pro ject button on the Startup Form The program automatically stores the last project used 38 WinFence User 5 Guide Using the GIS Interface Using the GIS Interface Projects are now displayed using a geographic information system GIS The GIS displays a pro jec
80. d to create the bitmap this field will not be displayed If Stretch Bitmap is set to No then this field will not be displayed The units of measurement are specified in the page layout Right This is the position of the right border of the bitmap in inches or millimeters from the left side of the page If the Bitmap button on the toolbar is used to create the bitmap this field will not be displayed If Stretch Bitmap is set to No then this field will not be displayed WinFence User 5 Guide 157 Templates Top This 15 the position of the top border of the bitmap in inches or millimeters from the top of the page If the Bitmap button on the toolbar is used to create the bitmap this field will not be dis played If Stretch Bitmap is set to then this field will not be displayed Bottom This 15 the position of the bottom border of the bitmap in inches or millimeters from the top of the page If the Stretch Bitmap is set to No or Maintain Aspect Ratio is set to Yes then this field will not be displayed and the bottom will be calculated by the program Center X This is the bitmap s horizontal center in inches or millimeters from the left side of the page If Stretch Bitmap is set to Yes this field will not be displayed If the Bitmap button on the toolbar is used to add the bitmap this field will be filled in by the program Center Y This 15 the bitmap s vertical center in inches or millimeters from the top
81. d to edit the description The speed buttons on the toolbar preform the following functions The Take Fill Description button will copy the fill description used in the symbol library to the description for the strata Fill Tab The Fill Tab shown below is used to select the lithologic library and symbol to use for the strata Strata Data Top Boundary Bottom Boundary Color Symbol Library British Symbols Background FilSze 1 WinFence User s Guide 85 Cross section Data The Fill Tab can be used to specify the following information Symbol Library This is used to select the symbol library for the strata When the arrow at the right is pressed a list will display the available symbol libraries After a library has been selected the symbols displayed in the tab will be updated The WinFence program comes with the same symbol libraries as WinLoG Additional symbol libraries can be created using the Symbol Libraries submenu of the File menu see Chapter 7 In addition any symbol libraries created in WinLoG can be used in WinFence Symbol The symbol for the strata can be selected by clicking on one of the 18 symbols displayed for the current library The selected symbol is highlighted with a blue border Fill Size The fill size is used to expand or condense the symbol before it is drawn The size of the symbol is multiplied by the fill size and then the symbol is drawn For example a fill size of 2
82. der s Information Name Michael Fraser Phone Company E Emai mfraser gaea ca Error Description WinFence 2 Version 2 00 Include Database Files Operating System windows Error Description Detailed Description of the Error ie Steps to reproduce it X Cancel Help 184 WinFence User 5 Guide Getting Technical Support The following information can be entered on this form Name Your name Company Your companies name Email Your email address Phone Your phone number Fax Your fax number WinFence Version The version of WinFence you are using This should be automatically filled in by the program Include Database Files The include Database Files check box allows you to include the data base files you are currently working on However it should only be used if absolutely necessary since the database files are very large and many email servers are unable to send them Operating System Your computer s operating system i e Windows 98 2000 NT XP etc Error Description A short description of your error For example the user might get a floating point error and put that name in the description text box Detailed Description of Error Enter a detailed description of the error including what you were doing when you got the error what menu items you used what data you were entering and whether the problem occurs all of the time or only occasionally The Send butt
83. e _ units lui 370 units Tinch __ feet Calculate Fit Scale Coords Input Units Display Units Feet Feet C Metres C Metres J Cancel Help 52 WinFence User 5 Guide Using the GIS Interface When choosing a map consider whether a small scale or large scale suits your purposes better A large scale map shows a small land area in great detail A small scale map shows less detail but a larger land area The following information can be entered and edited using this tab Scale Setting This radio button allows the user to change the scale setting to either a dimension less ratio or to a given distance metres Location Map Scale This text box allows the user to enter the scale they wish to have the loca tion map drawn at If the scale setting is at 1 unit 50 units then for example 1 metre on the print out is equal to 50 metres in the real world If the scale is linch 25 feet then 1 screen inch is equal to 12 25 2 300 inches in the real world Input Units Input units are the units that are stored in the database and that locations one the screen are stored in Display Units Display units are the units that are displayed on the screen For example the input units from the database can be in metres but the display units maybe feet Grid Map Tab The Grid Map Tab shown below sets the Grid and Map defaults for the project location map Location Map Setup Scale Units
84. e Title Bar Legend Cross Section Scale Bar Location Map Paragraph Text Bitmaps Lines Rectangles 131 Templates To edit the Title Bar either click on the title bar or select the Title Bar menu item from the Edit or Popup menu The Template Title Bar form below will be displayed This form has two tabs one for the Titles and one for the Layout Project Number Drawn By Date X Cancel 7 Help Titles Tab The following information can be entered in the Titles tab Title This the title to display for the data item up to 100 characters The data item will be dis played on the same line next to the title on the Title Bar The title will also be used to prompt for information when entering data for the cross section The first title in the Title Bar has its own font that is specified in the Layout tab This line is usually used for the cross section name Left This 1s the horizontal position of the title in inches or millimeters from the left side of the page The units of measurement are specified in the page layout If the titles are left justified specified in the Layout tab the title will start at this position If the titles are right justified the title will end at this position Top This is the vertical position of the title in inches or millimeters from the top of the page The units of measurement are specified in the page layout 132 WinFence User 5 Guide Title Bar
85. e Distribution Package The WinFence distribution package you received should include this User s Guide and a CD ROM Required Equipment WinFence requires the following hardware and software to run efficiently 1 A graphics card that supports at least OpenGL version 1 2 1 2 Windows2000 NT or XP 3 Atleast 128 MB of RAM 4 At least 64 MB of hard disk space Installing WinFence Installing WinFence To get WinFence up and running run the installation program INSTALL EXE on the CD ROM For example to install from drive D 1 Start Windows 2 Insert the CD ROM into drive D 3 Choose Start and then Run and type D install exe or double click on D install exe in Windows Explorer or double click on the Add Remove Programs icon in the Control 4 Enter the requested information in the installation forms discussed in the next section On some computer systems depending on how they are configured inserting the CD ROM into the drive will automatically start the GAEA demo program In this case select WinFence from the demo screen All of the programs listed on the demo screen can be installed and will run in demo mode until an unlock code is provided The SETUP program does the following 1 Creates one or more directories on your hard disk and copies the contents of the WinFence disk into them 2 Creates a Windows application group and installs the WinFence program and help icons If you are re installin
86. e Library ID X Cancel Help The following information can be entered on this form Unique Library ID This is a unique id or name for the library up to 100 characters The Library ID cannot include any of the characters WinFence User 5 Guide 171 Libraries Name This is the name of the library up to 255 characters After the above information has been entered a blank library will be created and displayed This library will contain 18 blank symbols and descriptions that can be edited and saved as discussed below Opening a Symbol Library To open an existing library either select the Open Library menu item of the Symbol Libraries sub menu of the File menu or click the Open button on the Library Toolbar The Open Library form below will be displayed Select the library to open and then press the Ok button Library Names Common Symbols Igneous and Metamorphic Rocks Sands and Gravels Sedimentary Rocks Silts and Clays USCS Symbols Well Materials X Cancel Help Editing a Symbol Library Each library can contain 18 lithologic symbols Lithologic symbols are used to represent soils and rocks The lithologic symbols and descriptions in the library can be changed by selecting the Lithologic Symbols menu item of the Edit menu or clicking on one of the lithologic symbols in the library The Symbol Descriptions form on the next page will then be displayed This form
87. e horizontal and vertical scales The units can be m cm m in ft cm or ft in They relate real world coordinates with page coordinates For example if the scale units are m cm and the scale is 5 then 5m in real coordinates would equal 1 cm on the page Borehole Well Columns In the template for the cross section there can be up to 3 types of data displayed at each borehole or well If any of the columns are Sample Other Text Graph Bargraph Double Graph Geophys ical or Double Geophysical the dataset name can also be specified This is necessary when the borehole or well logs contain multiple datasets of that type For example a well that contains numerous geophysical logs the dataset name would be used to select which geophysical log to display Generally the type and name of dataset 1s specified in the template However the dataset name can also be specified in the cross section If Sample Other Text Graph Bargraph Double Graph Geophysical or Double Geophysical are specified in the template for the borehole or well columns the Edit menu and popup menu will contain menu items for that type of dataset For example if the template specified a borehole well column to display a geophysical log then the Edit menu and popup menu would contain the menu item Geophysical Log When this menu item is selected the Geophysical Columns form on the next page is displayed Using this form the dataset name of the column can be selected The defa
88. e location map can be turned on and off in the template WinFence User Guide vi Introduction Polylines can be drawn any where on a cross section Deviated boreholes can be displayed on a cross section Program can now automatically update itself to the most recent ver sion Program now has online technical support where it can email techni cal support all relevant files and information if there is a problem All of the databases Project Project List Main Database are auto matically backed up and can be easily restored Projects and templates can have passwords assigned to control usage Existing Features Windows network compatible Standard Windows file and print commands Data is stored in a Microsoft Access database No limit on the number of projects cross sections and strata Legend and header of the fence diagram can be fully customized Title bar can contain any number and type of data Legend can contain lithologic symbols with standard or custom lithology descriptions Cross section can contain a location map as an inset showing the borehole locations and the pathline WinFence User Guide Horizontal and vertical scales of the cross section be specified or automatically fitted by the program Customizable scale bar can be placed anywhere on the cross section Selection of cross section paths interactively in map view Cross sections can con
89. e paragraph text If no frame is selected above this field will not be displayed Frame Color This is the color of the frame to display around the paragraph text When the Frame Color button is pressed a Color form will be displayed Using this form a basic color can be selected or a custom color can be specified If no frame is selected above this field will not be dis played At the top of the Paragraph Text form is the Rich Text toolbar this toolbar can be used to modify the font characteristics of the text Before selecting a speed button the text to be modified should be selected with the mouse The speed buttons of the toolbar perform the following functions T Arial gt 10 Z As Sr 4 y The Font Typeface box is used to select the name of the font to use for the selected text The Font Size box is used to set the size of the font for the P Arial E selected text The Font Color box is used to select the color of the font for the selected text The Bold button is used to toggle the bold attribute of the selected text on and off The Italics button is used to toggle the italic attribute of the selected text on and off 154 WinFence User 5 Guide Paragraph Text The Underline button is used to toggle the underline attribute of the selected text on and off Ic The Superscript button is used to toggle the superscript attribute of the selected text on and off The Subscr
90. e tool bar Then drag the mouse to where you want the toolbar and release the button The number of rows in the floating toolbar can be adjusted by changing the size of the toolbar with the mouse B a C1 WinFence User 5 Guide Popup Menus The toolbars can also be collapsed and expanded by clicking on the 3 letter toolbar name at the beginning of each toolbar Each toolbar contains several speed buttons that can be used to perform the same tasks as the menu bar at the top of the desktop These speed buttons are described below Project Toolbar The Project Toolbar is used to create open and close projects JE S 9 Each of the speed buttons on the toolbar is explained below The New button is used to create a new project 9 The Open button is used to open an existing project The Close button is used to close an open project this button will be dimmed if no project is currently opened The Fence Diagram button is used to display a fence diagram the project in 3D The Help button is used to display help on using the program f The Exit button 1 used to exit the program Cross Section Toolbar The Cross Section Toolbar is used to create and edit cross sections Each of the speed buttons on the toolbar is explained below v Gta oO D Sauga WinFence User 5 Guide 15 Getting Started D Ta gt The New button is used to create a new cross
91. ectangle form described in the next section will then be displayed 2 By selecting the Rectangles menu item from the Edit menu or Popup menu and then clicking on the Add button on the form The Edit Rectangles form described in the next section will then be displayed Using this method the location of the rectangle must be specified on the form Editing a Rectangle Existing rectangles can be edited by selecting the Rectangles menu item of the Edit or Popup menus or by clicking the left mouse button inside the rectangle The Edit Rectangle form below will then be displayed Edit Rectangle gt Fill Color 5 Help WinFence User 5 Guide 161 Templates The following information can be entered and edited using this form Left This is the position of the left border of the rectangle in inches or millimeters from the left side of the page If the Rectangle button on the toolbar is used to create the rectangle the program will fill in this position The units of measurement are specified in the page layout Right This is the position of the right border of the rectangle in inches or millimeters from the left side of the page If the Rectangle button on the toolbar is used to create the rectangle this position will be filled in by the program Top This is the position of the top border of the rectangle in inches or millimeters from the top of the page If the Rectangle button on the toolba
92. ected then the WinLoG project list database will not be backed up Back Up Main Database If this checkbox is checked then the WinLoG main database will be backed up at a regular interval defined by the combobox to the right of it If this checkbox is not selected then the WinLoG main database will not be backed up Other Tab The following parameters can be set on the Other tab shown on the next page Skip Introduction Screen When this box is checked the Startup Introduction screen will not be displayed WinFence User 5 Guide 69 Projects Directories Scales Auto Backups Other Section Generation Fence Diagrams Skip Introduction Screen Background Color Pick Width 8 Curve Fit Degree Dictionay American Selected Strata Outline lt Line AutoUpdates Automatic Updates Week X Cancel Help Background Color Press the Background Color button to change the color of the background when the program is first started Pick Width This controls how close the cursor has to be to an object s edge to pick the object This setting is used when adjusting the size and position of columns layers lines etc A setting between 10 and 20 1 recommended Curve Fit Degree This is the degree of curvature to use to draw the boundaries of the strata Curve fitting can be turned on and off individually for each strata A value of one will connect the data
93. ects The user can also add an arrow to the line at either the Start or End position with the arrowhead size of their choice The following can be edited from this form Start X This is the horizontal position of the start of the line in real grid coordinates either feet or meters If the Line button on the toolbar is used to create the line the program will fill in the posi tion otherwise the user will have to enter in the position Start Y This is the vertical position of the start of the line in real grid coordinates either feet or meters If the Line button on the toolbar is used to create the line the program will fill in the posi tion otherwise the user will have to enter in the position End X This is the horizontal position of the end of the line in real grid coordinates either feet or meters If the Line button on the toolbar is used to create the line the program will fill in the posi tion otherwise the user will have to enter in the position End Y This is the vertical position of the end of the line in real grid coordinates either feet or meters If the Line button on the toolbar is used to create the line the program will fill in the posi tion otherwise the user will have to enter in the position Line Style Clicking the Line Style button opens a Line properties form on which the user can select the Line Style Solid Dashed Dash Dot etc thickness and color of the line C Rectangle Button The Rectangle b
94. edit the description color symbols and boundaries of the strata Edi Properties Delete Strata Delete Strata used to delete the selected strata Use Existing Strata used to graphically select an existing strata as the Use Existing Strata gt top or bottom boundary of this strata Add Boundary Add Boundary used to graphically add the top or bottom boundary of Add Points b this strata Edit Points Add Points used to graphically add points to the top or bottom naes Points boundary L one Bancel Edit Points used to graphically edit points on the top or bottom elis boundary Previous menu Delete Points used to graphically delete points on the top or bottom boundary Done used to end the editing of the top or bottom boundary Cancel used to cancel the current editing of the top or bottom boundary Previous menu used to un select this strata and return to the Cross Section popup menu the next time the right mouse button is clicked Template Popup Menu If a template is currently displayed on the desktop the Template Popup Menu will be displayed This popup menu contains the following commands Save saves the template in the database Close closes the template Title Bar used to edit the layout and data types for the title bar Legend used to edit the layout and strata in the legend Cross Section used to edit the layout default scales axes fonts and borehole properties to plot Win
95. edited at any time no project has to be open To create a template either select the New Template menu item of the File menu or click the New button on the Template Toolbar The New Template Name form shown below will be displayed New Template TE Page Setup Cross Section Cross Section Tie tase end Cross Section Legend X Cancel Help This form has two tabs for specifying the layout and page setup of the template The Layout tab 15 used to select the location of the cross section title bar and legend To select a layout click on the button containing the layout the selected layout will be highlighted in blue Legend Cross Section WinFence User 5 Guide 129 Templates New Template Page Size Letter Width T n E Height Orientation Landscape C Portrait Cancel The Page Setup tab shown above is used to specify the following parameters Page Size This sets the page size for the template When the arrow at the right is pressed a list of available paper types will be displayed Width If the page size is specified as custom the horizontal width of the page in inches or mil limeters must be specified This field is dimmed if the page size is not custom Height If the page size is specified as custom the vertical height of the page in inches or mil limeters must be specified This field is dimmed if the page size is not custom Units This is the un
96. elow will then be displayed Paragraph Text Ip Arial 7 U Border Position E Background Color Frame C No Yes Frame Width 1 S Frame Color m M4 n X X Cancel Help The following information can be specified on this form Text This is the text for the paragraph There is no limit to the length of the text The Rich Text toolbar at the top of the form is used to format the text At the top of the Paragraph Text form is the Rich Text toolbar this toolbar can be used to modify the font characteristics of the text Before selecting a speed button the text to be modified should be selected with the mouse Left This is the position of the left border of the paragraph in inches or millimeters from the left side of the page If the Paragraph button on the toolbar is used to create the paragraph this position will be filled in by the program The units of measurement are specified in the page layout Right This is the position of the right border of the paragraph in inches or millimeters from the left side of the page 98 WinFence User 5 Guide Paragraph Text Top This is the position of the top border of the paragraph in inches or millimeters from the top of the page Bottom This is the position of the bottom border of the paragraph in inches or millimeters from the top of the page Background Color This is the background color of the paragraph text box When the B
97. en you receive the unlock code enter it in the space at the bottom of the Registration form and then press the Store Unlock Code button The WinFence program is now registered and the Demo form will no longer be displayed when the program is run Network Registration Registering the program for a network with multiple users is a little different than for a single user The Network Monitor program shown below is used to unlock the network and monitor program usage fli WinFence Network License Viewer of x Maximum Users User Last Updated Update Users View Log amp Unlock Network Sy Update Maximum To unlock the program start the Network Monitor program in the WinFence application group Click on the Unlock Network button on the Network Monitor form Then contact GAEA by email or telephone and provide the network serial and user numbers shown on the form Enter the net work and user unlock codes provided by GAEA and then press the Ok button 6 WinFence User 5 Guide Transferring the Registration Transferring the Registration After the WinFence program has been registered the unlocked program can be transferred to a dif ferent computer using the Transfer utility This utility allows you to move the WinFence program between computers without requiring assistance from GAEA After the registration has been trans ferred the WinFence program will only run on the new computer The Transfer utility
98. end block location map and scale bar Company logos bitmaps text paragraphs lines arrows and rectangles can also be added to templates Once the template 1 cre ated it is available to all projects WinFence comes with several previ ously created templates that can be further customized WinFence User s Guide iv Introduction After the cross section had been created it can be displayed in 3D along with other cross sections in the project as a fence diagram The 3D fence diagram display can be panned zoomed and rotated The posi tion of the user and the light source can also be easily moved WinFence shares the same database as WinLoG and can be used to access and plot the borehole data entered in WinLoG Several types of borehole data can be plotted on the cross sections including lithologic symbols sample symbols core logs well diagrams graphs and geo physical logs The actual borehole log data can be opened and edited in WinLoG by double clicking on the borehole in WinFence cross section data for a project 1 stored in a Microsoft Access data base This database allows for the quick storage and retrieval of cross section data and can be interfaced with a variety of other programs There is no limit to the number of projects and cross sections that can be stored in the database The database 1 setup to work across a net work if desired with each project stored in a separate directory A master project
99. enter in the position Right This is the position of the right border of the ellipse in real grid coordinates either feet or meters If the Ellipse button on the toolbar is used to create the ellipse the position will be filled in by the program otherwise the user will have to enter in the position Top This is the position of the top border of the ellipse in real grid coordinates either feet or meters If the Ellipse button on the toolbar is used to create the ellipse the position will be filled in by the program otherwise the user will have to enter in the position Bottom This is the position of the bottom border of the ellipse in real grid coordinates either feet or meters If the Ellipse button on the toolbar is used to create the ellipse the position will be filled in by the program otherwise the user will have to enter in the position Line Style Clicking the Line Style button opens a Line properties form on which the user can user select the Line Style Solid Dashed Dash Dot etc thickness and color of the line Fill Color Clicking the Fill Color button open up the color form from which the user can select the color they wish to have on the interior of the ellipse JE Polygon Button The Polygon button allows the user to place a polygon anywhere on the location map To draw a polygon click on the Polygon tool button then click the left mouse button at the first point of the polygon Move the cursor to the second point of the
100. er 5 Guide Getting Technical Support Information to Provide When contacting GAEA please include or have the following information available The 3 digit version of the WinFence program you are using This can be obtained from the About form on the Help menu A description of the problem to help us duplicate the problem Including any error messages Copies of the sieve analysis and template files These can be exported in Exchange format and then emailed to us The type and model of your PC The Windows version you are using WinFence User 5 Guide 187 188 WinFence User 5 Guide
101. eration tab in the program s Preferences See Chapter 3 for a description of how to adjust the auto generation in the program s Preferences Drawing Pathlines The pathline of the cross section can be drawn by pressing the Line button on the New Cross Sec tion toolbar The cursor will then change to a cross hair Click on the location of the starting point of the cross section and then click on each point of the pathline Only the points where the pathline bends need to be clicked At the last point on the path line double click the mouse The pathline will then be drawn as shown below The selected wells will be highlighted as specified with the Symbols button In the map above the selected well symbols are larger To increase the number of wells selected slide the Path Width slidebar down The wells selected on the Location Map will then be increased as shown on the next page WinFence User 5 Guide 79 When specifying the start and end of the pathline it should be noted that these points are also used to determine the distance between the edge of the cross section and the first and last boreholes It 1s recommended that the start and end points be placed a little past the first and last boreholes of the cross section 80 WinFence User 5 Guide After the desired and wells have been selected the cross section can be created by press ing the Ok button Opening a Cross Section After a cross section has bee
102. es Symbol Size This is the size of the well symbol to use for the unselected boreholes Typically between 10 an 20 Unselected Boreholes Color This is the color of the well symbol to use for the unselected bore holes When the Color button is pressed a Color form will be displayed This form can be used to select a basic color or specify a custom color Current Cross Section Line Style This is the line style to use to draw the path of the displayed cross section on the location map Current Cross Section Label Font This is the font to use for the labels of the current cross sec tion WinFence User 5 Guide 151 Templates Other Cross Section Line Style This is the line style to use to draw the path of the other cross sections on the location map Other Cross Section Label Font This is the font to use for the labels of the other cross sections Sizing and Moving the Location Map The size and position of the location map can be changed using the Location Map form or the mouse To adjust the size using the mouse click on a border and drag it to its new location To move the location map position the mouse in the center of the legend and drag it to its new loca tion Paragraph Text Floating paragraph text boxes can be added anywhere on a template These text boxes are dis played over top of any information on the template There is no limit to the number of paragraph text boxes that can be displayed Paragraph text boxes are ty
103. fications are done using the Scene Map of the fence diagram To display the Scene Map click on the Scene Map button on the Toolbar The Scene Map will be displayed an example of one is shown below The area of the fence diagram 15 represented by the rectangular box in the center of the map 5 41 896 Grid Elev iY 0 Grid Extent 109 BHi04 BH106 344 6 395 4 589 3 Vert Pos 1505m Tit 55 This map is used to control the position of the camera s and light source s size and position of the grid and size of the boreholes relative to the fence diagram The use of these controls and the ones on the FD toolbar are described below WinFence User 5 Guide 119 Fence Diagrams Using Cameras In this application cameras represent the user in 3D space and are used to view the fence diagram from various positions and angles There can be one or more cameras in 3D space with each cam era represented by a solid square on the Scene Map The currently active camera is shown in blue and the remaining cameras are shown in black To switch between cameras double click on them on the Scene Map When a camera is selected it will turn red with cross hairs it can then be posi tioned as described in the sections below Adding a Camera add a new camera to the Scene Map click on the Add Camera button on the Fence Dia gram toolbar The camera will be added to the Scene Map at the top left and
104. g Bitmaps The size and position of the bitmap can be changed using the Bitmap Information form or the mouse To adjust the size using the mouse click on a border and drag it to its new location To move the bitmap position the mouse in the center of the bitmap and drag it to its new location 102 WinFence User 5 Guide Lines Lines Horizontal vertical and diagonal lines and arrows can be added anywhere on a cross section There is no limit to the number of lines and arrows that can be added Adding a Line There are two methods that can be used to add a line or arrow to a cross section 1 By clicking on the Line button on the Toolbar Next using the left mouse button click on 3 the location of the starting point of the line or arrow Then while holding down the left mouse button drag the cursor to the end of the line or arrow and release the mouse button The Edit Lines form described in the next section will then be displayed 2 By selecting the Lines menu item from the Edit menu or Popup menu and then clicking on the Add button on the form The Edit Lines form described in the next section will then be displayed Using this method the location of the line must be specified on the form Editing a Line Existing lines and arrows can be edited by selecting the Lines menu item of the Edit or Popup menus or by clicking the left mouse button on the start or end point of the line The Edit Lines form below will then be displayed Edi
105. g or upgrading the program select Custom Setup Using Custom Setup you can select not to install the empty databases this will avoid over writing your existing databases A complete list of files that are copied and the directories they are copied to is provided in Appen dix C Requested Information The installation dialog boxes will request the directories to store the WinFence program and data bases and the name of the application group for the WinFence program icons WinFence User 5 Guide 3 Getting Started Network Installation The following items should be checked before installing WinFence on a network 1 Ensure that you have sufficient network rights to the drive on which you will install WinFence on Windows XP NT and 2000 systems you will need to have system administrator privileges 2 Check to see if you have sufficient disk space available for the program files at least 64 MB 3 Verify that the drive letters that you specify during installation are consistent with those that are available on your server 4 Make sure the total number of WinFence copies in use does not exceed the number that is licensed If you need more copies than are currently licensed contact GAEA to order additional licenses To install the WinFence program on a network server follow the installation instructions provided above After the WinFence program has been installed the users must be given network access to the WinFence program director
106. h to include in the cross section X Cancel Select the boreholes to be included in the cross section and then press the Ok button The Adjust Scales form below will be displayed Select Yes to have the program automatically adjust the hori zontal and vertical scales so that the cross section fits on one page Select No to use the scales specified in the template If the cross section does not fit on one page it will be cropped The new cross section will then be displayed This cross section can be edited and saved as described in the sections below 78 WinFence User 5 Guide Creating a New Cross Section Auto Generation of Cross Section Strata In version 2 there is the option to have the program automatically generate the cross section This is done using artificial intelligence AI built into the program When determining how to connect the strata between boreholes wells and intersecting cross sections the program looks at the simi larities in the lithologies thicknesses and occurrence of the strata This methodology works well with most geologies except where the geology is very complicated or there are faults In addition the program s AI will not be able to determine alteration zones However these zones can be added and the strata can be edited after the cross section has been generated Adjust Scales The auto generation of the cross section can be turned on and off on the Auto Gen
107. hat can be used to add a rectangle to a cross section 1 By clicking on the Rectangle button on the Toolbar Next using the left mouse button L1 click on the location of the upper left corner of the rectangle Then while holding down the left mouse button drag the cursor to the lower right corner of the rectangle and release the mouse button The Edit Rectangle form described in the next section will then be displayed 2 By selecting the Rectangles menu item from the Edit menu or Popup menu and then clicking on the Add button on the form The Edit Rectangles form described in the next section will then be displayed Using this method the location of the rectangle must be specified on the form Editing a Rectangle Existing rectangles can be edited by selecting the Rectangles menu item of the Edit or Popup menus or by clicking the left mouse button inside the rectangle The Edit Rectangle form on the next page will then be displayed 106 WinFence User 5 Guide Rectangles Edit Rectangle M4 bn X Jf X Cancel Help The following information be entered and edited using this form Left This is the position of the left border of the rectangle in inches or millimeters from the left side of the page If the Rectangle button on the toolbar is used to create the rectangle the program will fill in this position The units of measurement are specified in the page layout Right This is the position of the right
108. he location of the line must be specified on the form Editing a Polyline Existing polylines can be edited by selecting the Polylines menu item of the Edit or Popup menus or by clicking the left mouse button on the start or end point of one of the line segments If the start or end point is double clicked on the points in the polyline will be drawn with a square box The points can then be moved using the left mouse button If the PolyLine menu item is selected the Edit Polylines form on the next page will be displayed The following information can be entered and edited using this form Point X The polyline is composed of a series of line segments between points This is the hori zontal position of the points Point Y This is the vertical position of the points Line Style This is the style of the polyline The line style can be changed by pressing the Line Style button WinFence User 5 Guide 105 Cross section Data E The Add Point button is used to add a point to the polyline xX The Delete Point button is used to delete a point on the polyline At the bottom of the form there are buttons to move to the first polyline move to the previous polyline move to the next polyline move to the last polyline add a polyline and delete a poly line Rectangles Rectangles can be added anywhere on a cross section There is no limit to the number of rectan gles that can be added Adding a Rectangle There are two methods t
109. his is the default units to use for the horizontal and vertical scales The units can be m cm m in ft in or ft cm Map Tab The Map tab shown on the next page is used to specify the following parameters Show Location Map This radio button allows the user to turn the location map on or off WinFence User 5 Guide 67 Projects Dther Section Generation Fence Diagrams Directories Scales Map Auto Backups Location Map Grid Show Location Map Show Grid 1 Yes C Yes Horizontal Spacing 500 Cross Section Line Style Vertical Spacing 500 Selected Line gt Line Style DLE Default Line Label Font Horizontal Vertical Axis ES Line Style Font X Cancel Help Cross Section Line Style Clicking either of the line style button opens a Line properties form which the user can user select the type of line representation they would like on the location map for the selected and default lines Cross Section Label Font The font button allows the user to edit the label font Clicking on the button opens up the Font Style form This form allows the user to change the font font size font color and font style Show Grid This is used to turn the grid on and off Horizontal Spacing This is the spacing between horizontal grid lines as shown on the location map in real grid coordi
110. ies and databases When installing a second user on a network do not install the databases from the CD This will over write the existing master and main databases on the server When installing WinFence on a client PC specify the directory on the server where the master data base is stored as the main database directory README File Any last minute changes additions or trouble shooting tips are documented in the README file When the SETUP program has finished installing the WinFence program it will automatically install an icon for the README file in the application group To view the README file click on this icon Uninstalling WinFence The WinFence program files can be removed from your hard disk using the Add Remove pro grams option in the Windows Control Panel Uninstalling the WinFence program will also remove the WinFence icons and application group 4 WinFence User 5 Guide Registering WinFence Registering and Unlocking WinFence Before WinFence can be used it must be registered Prior to registration process the program will run in Demo mode During the registration the program will be unlocked Single User Registration To register the program and obtain an unlock code run the WinFence program The first time the program is run it will operate in Demo mode and the form below will be displayed This form can also be displayed using the Purchase menu item in the Help menu Winkence Demo
111. ify the title bar To edit the Title Bar either click on the title bar or select the Title Bar menu item from the Edit or Cross Section Popup menus The Cross Section Data form on the next page will be displayed Enter the data shown below on the input lines and then press the Ok button The title bar on the cross section will then be updated with the data 28 WinFence User 5 Guide Editing Strata Cross Section Data Project Number Drawn By Edt Data Type M4 n X X Cancel Entering Strata In this tutorial we have used the auto generated strata These strata can be easily edited to your requirements In this example we will edit the sand Editing the Sand To edit the top boundary of the sand select the Sand strata on the Quick tool bar The top and bottom boundaries of the sand will then be highlighted in red Edit Top Bottom c r 0 c89 WinFence User 5 Guide 29 Then to edit the points on the top boundary click the Edit Points button the Top tab of the Quick toolbar The points used to define the top boundary of the sand will be highlighted with blue boxes There will be one point for each borehole and intersecting cross section and at the beginning and end of the layer Select the last point on the right and move it down a bit to make room for a thicker coal The cross section should then look as shown below Ebuation Top Bottom
112. ight corner of the ellipse and release the mouse button W Saving a Symbol Library To save a library after it has been edited either select the Save Library menu item of the Symbol Libraries submenu of the File menu or press the Save button on the library toolbar WinFence User 5 Guide 177 Libraries Deleting a Symbol Library To delete a library select the Delete Library menu item from the Libraries submenu of the File Menu The Delete Libraries form below will be displayed Delete Libraries Library Names British Svmbols Common Symbols Igneous and Metamorphic Rocks Sands and Gravels Sedimentary Rocks Silts and Clays USCS Symbols Well Materials Jf OK X Cancel Help A single library can be selected by clicking on it and pressing the Open button A range of libraries can be selected by clicking on the beginning of the range and then holding down the Shift key while clicking on the end of the range Multiple libraries can be selected by holding down the CTRL key while clicking on the libraries Printing a Symbol Library To print a library either click the right mouse button and select the Print menu item from the popup menu or press the Print button on the library toolbar 178 WinFence User 5 Guide WinFence User 5 Guide 179 Libraries 180 WinFence User 5 Guide WinFence a c amp Hide Back Print Options Contents Index Search oi ntrodu
113. il below Detailed instructions on entering and editing cross section data are provided in Chapter 4 Selecting a Project Since the WinFence program uses borehole logs created in WinLoG to create cross sections a pre viously created project will be used for this tutorial This project was created in WinLoG and has four borehole logs g To select the project click on the Open Project button on the Project toolbar or select the Open Project menu item from the File menu When the program is initially started you can also select the Open Project button on the Startup form The Open Project form will then be dis played The Open Project form will display a list of available projects Select the WinFence Tutorial project and then press the OK button The project location map for the WinFence Tutorial project will then be displayed as shown on the next page This project has two previously completed cross sections BB and CC In this tutorial we are going to create a third cross section AA WinFence User 5 Guide 23 1100 1208 1400 1600 1700 1100 1200 1300 1400 Creating a New Cross Section There are two steps to creating a new cross section First the pathline of the cross section needs to be specified and then a template needs to be selected The pathline is the imaginary line that the cross section follows through the boreholes in the project This line can be either straight or bent To create a new cross section
114. inates of either feet or meters Vertical Spacing This is the spacing between vertical grid lines as shown on the location map in real grid coordinates of either feet or meters Line Style Button Clicking the line style button opens a Line properties form on which the user can user select the type of grid lines Axis Tab The Axis Tab sown on the next page sets the horizontal and vertical axis defaults for the project location map The following information can be entered and edited using this tab Show Horizontal Axis This radio button allows the user to turn the Horizontal axis on the loca tion map on or off Show Vertical Axis This radio button allows the user to turn the Vertical axis of the location map on or off Min Tic Interval This is interval in feet or metres at which small tic occurs on both the hori zontal and vertical axis of the location map The units of measurement are specified on the Units tab 54 WinFence User 5 Guide Using the GIS Interface li Location Map Setup Scale Units Grid Fence Line DXF Vertical and Horizontal Axis Defaults Show Horizontal Axis C No Yes Major Tic Interval Minor Tic Interval Show Vertical Axis C No Yes Major Tic Interval Line Style Font X Cancel Help Max Tic Interval This is interval in feet or metres at which large tics and axis labels occurs on both the horizontal and vertical axis of the location map The units of mea
115. into the current project To export the currently displayed sieve analysis or template select the Exchange File menu item from the Export submenu The Export form on the next page will be displayed Specify the file name for the exported data and then press the Save button WinFence User 5 Guide 59 Projects Export Exchange Template File Save in O WinFence O Bitmaps E Metric ftm Filename Defaul Save as type Exchange Template Files Sd Cancel Clipboard Any currently displayed cross section or template can be exported to the Windows clipboard The format used to store the data in the clipboard is similar to a bitmap file To export the data to the clipboard select the Clipboard menu item from the Export submenu The Bitmap Information form shown below will be displayed Bitmap Information Horizontal Number of Pixels Vertical Number of Pixels 850 Jf OK Cancel The horizontal and vertical number of pixels determines the resolution used to store the bitmap in the clipboard The higher the resolution the clearer the picture will be The number of colors is the same as the current screen resolution Bitmap File Exporting to a bitmap file is the same as exporting to the clipboard except that the bitmap is stored in a file instead of the clipboard The file format is a Windows bitmap file Any cur rently displayed cross section or template can be exported to a bitmap file
116. ion 154 Scale Bar 164 Location Map 165 Paragraph Text 168 Bitmaps 172 LINCS us aat RM LA 175 Rectangles 177 Page Layout 179 Saving a Template 180 Deleting a Template 181 Chapter 7 Symbol Libraries Creating a New Symbol Library 187 Opening a Symbol Library 188 Editing a Symbol Library 188 Saving a Symbol Library 193 Deleting a Symbol Library 194 Printing a Symbol Library 194 Chapter 8 Help Displaying Help 199 Using Help 199 Getting Technical Support 200 Introduction G4 Na cs 4778 74 4 a e e 6 1 oF UT T Mad Era a M E AS ade adde a a ETWAS DLE E EI 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250 1300 1350 1400 Distance Project Tutorial Legend IAEA Project Number 2000 001 GAEA Technologies Location Someplace somewhere 44 Canadian Oaks Dr Drawn By M Fraser Ed Peat Whitby LIN 6W8 Date 11 02 2000 CANADA Scale Bar iml Sea Features Introduction WinFence can be used to graphically create detailed full color cross sections and fence diagrams quickly and easily The program can be used to interpret and map soil and rock l
117. ipt button is used to toggle the subscript attribute of the selected text on and off r o The Left Justify button will left justify the selected text The Center Justify button will center justify the selected text The Right Justify button will right justify the selected text The Select button will select all of the text The Cut button will remove the selected text and place it in the clipboard db Copy button will copy the selected text to the clipboard The Paste button will paste the text in the clipboard at the current position of the cursor in the text The Replace button will replace the specified text ET The Symbol button will display the Symbol form This form is used to place a symbol at the current cursor position in the text To select a symbol use the Font box to select the font con taining the symbol and then select the desired symbol After the desired symbol has been selected press the Ok button to insert it into the text field The WinFence program comes with a font called GAEA Symbols that contains a variety of well and other symbols The Spell Check button will display the Spell Checker form and will check the spelling in the text field The dictionary used to check the spelling is set in the program Preferences see Chapter 3 When the Add button is pressed the word will be appended to the custom dictionary RE Sizing and Moving Paragraph Text WinFence User 5 Guide 155 Templates
118. is is the horizontal spacing of the grid lines If set to zero no grid lines will be displayed Vertical Spacing This 1s the vertical spacing of the grid lines If set to zero no grid lines will be displayed Grid Line Style This is the line style to use to draw the grid When the Line Style button is pressed a Line Properties form will be displayed This form can be used to set the line style width and color Fill Area Under Curve The curve formed by the graph points can be filled with a solid color The fill will be between the left side of the column and the curve Fill Color This is the color to use for the fill When the Color button is pressed a Color form will be displayed This form can be used to select a basic or custom color If Fill Area Under Curve is set to no this field will not appear Connecting Line Style The data points for the graph can be connected by a line To change the line style press the Line Style button a Line Properties form will be displayed This form can be used to select the line style width and color If the line style is set to none no line will connect the points Point Type The graph data can be shown as circles crosses squares squares triangles or inverted triangles To not show the data points select none If this is a Bargraph column the point type is set to none and this field will not appear 61 Point Size This is the size of the data points If the Point Type is set t
119. its for the width and height of the page If the page size is custom the units can be set to either inches or millimeters Orientation This is the orientation of the page and can be either portrait longer side is vertical or landscape longer side is horizontal After the above parameters have been specified and the Ok button pressed a blank template with the selected layout will be displayed The name of the new template will need to be entered when it is saved 130 WinFence User Guide Opening a Template Opening a Template Existing templates can be opened for editing by selecting the Open Template menu item of the File menu or clicking the Open button on the Template Toolbar The template to be opened can then by selected from the Open Template form shown below Select Template Templates Default Metric Default25 Example 3 No bar Legal Side Bar Side Bar Legal Side Bar Metric M 4 M J OK X Cancel Help Editing a Template After the template has been created or opened it can be edited using the menu commands on the Edit menu or popup menu The layout and design of the template 1 very flexible Title Bar The title bar of the template 1 used to display general information about the cross section This can include information such as project name location date client name etc There is no limit to the number of data items that can be displayed WinFence User 5 Guide Save Clos
120. l description of the legend If this description 1s then edited in the legend the new descrip tion will only appear in that legend The new description in the legend will not replace the default description in the library To change the default description the descrip tion must be changed in the library as discussed below However the actual symbols are the same in the legend as in the library and if edited in the library the symbols in the legend will change as well Libraries are stored in the master project database so that they are accessible by all programs The format of the master database 15 Microsoft Access 97 This database 15 stored in the Main Database Directory This chapter describes how to 1 Create a new library 2 Edit a library 4 Save a library 5 Print a library Creating New Library These tasks can be performed using menu commands on the Edit menu or buttons on the Library Toolbar Save Close DELALE Pin Lithology Symbols O Creating a New Symbol Library Since libraries are stored in the master project database they can be created and edited at any time no project has to be open To create a library either select the New Library menu item of the Symbol Libraries submenu of the File menu or click the New button on the Library Toolbar The Create New Lithologic Library form below will be displayed Create New Lithologic Library Existing Library IDs WellMaterials Uniqu
121. lbar will be displayed Show Template Toolbar Show Library Toolbar Show Cross Section Toolbar if checked the Cross Sec tion toolbar will be displayed Show Template Toolbar if checked the Template toolbar will be displayed Show Library Toolbar if checked the Symbol Library toolbar will be displayed Window Menu This menu contains the standard Windows commands for selecting and arranging windows on the desktop Help Menu Accesses online help and information about the program Popup Menus Popup menus can be displayed at any time by pressing the right mouse button The menu that will be displayed depends upon what is currently displayed on the desktop WinFence User s Guide 11 Getting Started Project Popup Menu If no cross section or template 1s displayed the Project Popup Menu will be displayed This menu contains the following menu items Open Project dt isti ject z p j used to open an existing projec Open Project New Cross Section creates a new cross section dimmed if no pro ject is currently opened New Cross Section Open Cross Section opens an existing cross section dimmed if no Open Cross Section project is currently opened Open Template Open Template opens an existing template Exit Exit exits the WinFence program Cross Section Popup Menu If a cross section is currently displayed on the desktop the Cross Section Popup Menu will be dis played This pop
122. lbar at the top of the form is used to format the text Left This is the position of the left border of the paragraph in inches or millimeters from the left side of the page If the Paragraph button on the toolbar is used to create the paragraph this position will be filled in by the program The units of measurement are specified in the page layout Right This is the position of the right border of the paragraph in inches or millimeters from the left side of the page If the Paragraph button on the toolbar 1 used to create the paragraph this position will be filled in by the program Top This 15 the position of the top border of the paragraph in inches or millimeters from the top of the page If the Paragraph button on the toolbar is used to create the paragraph this position will be filled in by the program WinFence User 5 Guide 153 Templates Bottom This is the position of the bottom border of the paragraph in inches or millimeters from the top of the page If the Paragraph button on the toolbar is used to create the paragraph this posi tion will be filled in by the program Background Color This is the background color of the paragraph text box When the Back ground Color button is pressed a Color form will be displayed Using this form a basic color can be selected or a custom color can be specified Frame Select yes to display a frame around the paragraph text Frame Width This is the line width of the frame around th
123. lect the Edit Properties menu item from the Edit Strata popup menu The Strata Data form will be displayed This form is described in detail in the previous Adding Strata section 88 WinFence User 5 Guide Editing Strata X Delete Strata The currently selected strata can be deleted either by clicking on the Delete Strata button on the Strata toolbar or be selecting the Delete Strata menu item from the Edit Strata popup menu After it has been deleted no strata will be selected and the next time the right mouse button is clicked the Cross Section popup menu will be displayed Use Existing Strata Multiple layers can be quickly and accurately drawn by using existing strata for the their top or bottom boundaries Strata boundaries can either be formed by a series of points drawn on the cross section or by another strata To select another strata to use for the boundary select the Use Existing Strata menu item of the Edit Strata popup menu If the current strata has a top and bottom boundary you will also need to select which boundary you are specifying If the boundary has already been specified and contains multiple segments the Create New Seg ment message below will be shown Select whether to create a new segment or to re specify the boundary of the existing segment If you select to use an existing segment and there is more than one segment you will need to select the segment to use Create New Segment Either a new segment for the strata c
124. ll of the cross sections in a project would use one or two templates In this way a consistent format can be established within a project and across projects Once a template is created it is avail able to all projects WinFence comes with numerous easily customized tem plates which can be edited and saved as new templates You can also create a new template by specifying the desired layout Each template consists of a title bar leg end cross section location map and scale bar The loca tion map and scale bar are optional Templates can also contain paragraph text bitmaps lines arrows and rec tangles Templates are stored in the WinFence master database The format of the master database is Microsoft Access 2000 This database is stored in the Main Database Directory For a detailed discussion of the database struc ture see Database Structure in Appendix B This chapter describes how to 1 Create a new template 2 Open a template 3 Edit a template 4 Save a template 5 Delete a template 6 Set a password for the template Creating a New Template These tasks can be performed using menu commands on the Edit menu or buttons on the Tem plate amp DG E Title Bar o amp Q5 B a Legend Cross Section Scale Bar Location Map Paragraph Text Bitmaps Lines Rectangles amp Page Layout O Creating a New Template Since templates are stored in the WinFence master database they can be created and
125. mplate Legend Layout Strata Available Strata Strata In Legend Template gt Cancel Help The Strata tab shown above is used to specify the following information Available Strata This lists the available strata in the master WinFence database that can be included in the legend Strata in Legend Template This lists the strata currently included in the legend Additional strata can be added after the cross section is created The Right arrow is used to add the selected strata to the legend lt The Left arrow is used to remove the selected strata from the legend 4 The Up arrow is used to move the selected strata up in the legend The order of the strata in the list will determine the order they are displayed in the legend The Down arrow is used to move the selected strata down in the legend WinFence User 5 Guide 137 Templates Sizing and Moving the Legend The size and position of the legend can be changed using the Template Legend form or the mouse To adjust the size using the mouse click on a border and drag it to its new location To move the legend position the mouse in the center of the legend and drag it to its new location Cross Section The style of the cross section is specified in the Cross Section style form This form is used to specify the horizontal and vertical axes scales position of the cross section on the page and the data to be displayed from the borehole logs To edit the st
126. n an existing cross section Edit a cross section Save a cross section Print a cross section mV uer Reus Delete a cross section WinFence User 5 Guide 75 Cross section Data Strata These tasks can be performed using menu commands on the Edit menu or Drawing Order buttons on the Cross Section toolbar Legend Title Bar D c a ER Scales Paragraph Text Select Strata lg x Bitmaps Lines Rectangles Creating a New Cross Section After a project has been created or opened a new cross section can be created by selecting the New Cross Section menu item in the Cross Sections submenu of the File menu or the New button on the Cross Section or Location Map toolbars The New Cross Section toolbar below will then be displayed New Section Bar oN are 01 12 The buttons on this toolbar are used to perform the following tasks The Line button is used draw the pathline of the cross section on the location map When this button is pressed the cursor will change to cross hairs and you will be able to draw the pathline The drawing of pathlines is described in detail in the Drawing Pathlines section below The Erase Line button is used to erase the currently drawn pathline The Path Width sliding bar and entry 15 used to specify the width of the pathline to 21 24 use when selecting intersecting wells boreholes This feature is described in detail in the Drawing Pathlines section below
127. n created and saved it can be opened by Clicking on the Open button on the Cross Section toolbar Clicking on it on the Location Map or Selecting the Open Cross Section menu item from the File menu If the Open button or Open Cross Section menu item are used the Select Cross Section form below will be displayed Using this form the cross section to be edited can be selected Select Cross Section Cross Section Name 4 b Dl E Location Map X Cancel Help WinFence User 5 Guide 81 Cross section Data Editing a Cross Section After the cross section has been opened or created it can be edited using the Edit and Popup menus Cross Section SEC Toolbar and Strata Toolbar Editing of the cross section consists of creating and entering layers lenses faults intrusions and alteration zones In WinFence these fea tures are referred to collectively as strata In addition the drawing order title bar legend and scales can be edited Each strata in a cross section consists of a strata definition and one or more boundaries The strata definition includes the name of the strata its description bitmap symbol and boundary line styles Strata definitions can be stored either in the master database or the project database If the strata definition is stored in the master database it will be available to all projects If the strata definition is stored in the project database it will only be available to cross sections within
128. n farther away from the grid square to zoom out on the fence diagram The fence diagram itself will not zoom out unless you move the current camera farther from the grid square on the Scene Map WinFence User 5 Guide 123 Fence Diagrams Changing the Template as The template used to format and print the fence diagram is initially selected when the HE fence diagram 1 created it can be changed by clicking on the Change Template button on the Fence Diagram toolbar The Select Template form below will be displayed select the template to use and then click the Ok button Select Template Templates Side Bar Metric X Cancel 7 Help v OK Printing a Fence Diagram amp To print the fence diagram click on the Print button on the Fence Diagram toolbar 124 WinFence User 5 Guide Saving a Fence Diagram Display Saving a Fence Diagram Display e The display settings for the fence diagram are automatically saved by the program when the fence diagram is closed However these settings can be reset back to the default set tings by clicking on the Reset button on the Fence Diagram toolbar Closing a Fence Diagram gg close the fence diagram click on the Close button on the Fence Diagram toolbar WinFence User 5 Guide 125 Fence Diagrams 126 WinFence User 5 Guide Templates Templates Templates are used to control the layout and formatting of the cross section In general a
129. nates of either feet or meters Vertical Spacing This is the spacing between vertical grid lines as shown on the location map in real grid coordinates of either feet or meters Grid Line Style Clicking the line style button opens a Line properties form on which the user can user select the type of grid lines Horizontal Vertical Axis Line Style Clicking the line style button opens a Line properties form on which the user can user select the type of axis line they would like on the location map Horizontal Vertical Axis Font The font button allows the user to edit the size of the axis font 68 WinFence User 5 Guide Setting Program Preferences Auto Backups Tab Other Section Generation Fence Diagrams Directories Scales Map Auto Backups Back Up Project Databases minutes v Back Up Project List Database fi minutes Back Up Main Database minutes X Cancel Help The following parameters can be set on the Auto Backups tab Back Up Project Database If this checkbox 15 checked then the currently open project will be backed up at a regular interval defined by the combobox to the right of it If this checkbox is not selected then the currently open project will not be backed up Back Up Project List Database If this checkbox is checked then the WinLoG project list data base will be backed up at a regular interval defined by the combobox to the right of it If this checkbox is not sel
130. nd drag it to its new location Intersecting Cross Sections In version 2 intersecting cross sections are shown on a cross section similar to the way bore holes wells are shown except only the lithologies are displayed The intersecting cross sections that are displayed can be selected using the Intersecting Cross section menu item on the Edit menu and popup menu When this menu item is selected the Intersecting Cross section form below will be displayed x Select the Intersecting Cross Sections you would like to show x Cancel Help On this form select the intersecting cross sections to display by clicking on their checkboxes 108 WinFence User 5 Guide Water Levels Water Levels Multiple water levels can be drawn on a cross section The water levels are represented by a poly line and a static or dynamic water level symbol Adding a Water Level There are two methods that can be used to add a water level to a cross section By clicking on the Water Level button on the Toolbar If this is the first water level and there are water levels in the boreholes on the cross section the program will try to draw the water level using the water levels WinLoG Otherwise the water level can be added the same way as a polyline Click on the location of the starting point of the first line segment Then while holding down the left mouse button drag the cursor to the end point of the first li
131. nd wells The deviated borehole and well data must first be entered in WinLoG After the deviation data has been entered the borehole well will be displayed in true depth on the cross sections WinFence shares the same database as WinLoG and can be used to access and plot the borehole data entered in WinLoG Several types of borehole data can be plotted on the cross sections including lithologic symbols sample symbols core logs well diagrams graphs and geophysical logs The actual borehole log data can be opened and edited in WinLoG by double clicking on it in WinFence cross section data for a project is stored in a Microsoft Access database This database allows for the quick storage and retrieval of cross section data and can be interfaced with a variety of other programs There is no limit to the number of projects and cross sections that can be stored in the database The database is setup to work across a network if desired with each project stored in a separate directory The format of the cross section 1 controlled by a template that can be easily edited and cus tomized Templates are used to specify the format and position of the cross section title bar leg end block location map and scale bar Company logos bitmaps text paragraphs lines arrows and rectangles can also be added to templates Customizing of templates is explained in detail in Chapter 5 This chapter describes how to Create a new cross section Ope
132. ne segment and release the mouse button Continue to add the other line segments the same way After the end point of the last line segment had been added either click the right mouse button or double click ing the left mouse button The Water Level Information form described in the next section will then be displayed 2 By selecting the Water Level menu item from the Edit menu or Popup menu and then clicking on the Add button on the form The Water Level Information form described in the next section will then be displayed Using this method the location of the line must be specified on the form Editing a Water Level Existing water levels can be edited by selecting the Water Level menu item of the Edit or Popup menus or by clicking the left mouse button on the start or end point of one of the line segments or water level symbol If the start or end point of a line segment is double clicked on the points in the water level will be drawn with a square box The points can then be moved using the left mouse button If the water level symbol is clicked on the position of the symbol on the polyline can be moved using the mouse If the Water Level menu item 15 selected the Water Level Information form on the next page will be displayed WinFence User 5 Guide 109 Cross section Data Water Level Information xj Show Water Level Pom 0 00 326 92 Point 2 6758 16 513 30 Point 3 20304 48 507 82 Point 4 22761 07
133. ng the Grid Elev Slider on the Scene Map To adjust the elevation click on the slider triangle and move it to the left to move the grid eleva tion down and to the right to move the grid elevation up On the right side of the slider the eleva tion of the grid is indicated negative below sea level and positive above sea level Changing the Grid Extent Grid Extent 0 VW 3 5 11099 The extent of the horizontal grid can be adjusted using the Grid Extent Slider on the Scene Map To adjust the extent click on the slider triangle and move it to the left to decrease the extent and to the right to increase the extent On the right side of the slider the grid extent as a percentage of the fence diagram extent is shown 122 WinFence User 5 Guide Modifying the Display Zooming In To zoom in on the Scene Map click on the Zoom In button on the Fence Diagram toolbar As you zoom in the square outlining the grid on the Scene Map should get larger After you have zoomed in you can adjust the camera more finely within the grid square to zoom in on the fence diagram The fence diagram itself will not zoom in unless you move the current camera closer to the center of the Scene Map Zooming Out To zoom out on the Scene Map click on the Zoom Out button on the Fence Diagram tool bar As you zoom out the square outlining the grid on the Scene Map should get smaller After you have zoomed out you can adjust the camera to a positio
134. nt the cursor will change to a hand and you will need to select which segment to use WinFence User 5 Guide 91 Cross section Data of the existing points on the boundary segment will be highlighted with a box Click on the point to be deleted The other points on the boundary can also be deleted the same way When you have deleted all of the points required select Done from the Edit Strata popup menu Drawing Order The drawing order of the strata determines which order they will be drawn If strata overlap the drawing order will affect which strata 1s in the front and which is in the back To change the draw ing order select the Drawing Order menu item from the Cross Section popup menu or the Edit menu The Drawing Order form below will be displayed f Drawing Order rr NE Sandy Silt Till 200 c tv z a Limestone Cancel Help 5 The list of strata 15 sorted by the type of strata Before adjusting the drawing order select the type of strata to be adjusted Then to change the drawing order select a strata and then move it up or down in the list using the Up and Down arrows 92 WinFence User 5 Guide Legend Legend The legend of the cross section is used to display the symbol of the strata shown in the cross sec tion and their descriptions To add or remove strata in the legend select the Legend menu item in the Cross Section Popup or Edit menus The Strata in Legend fo
135. ntal Axis Vertical Axis Scales Elevations Units m gt Top Best Fit Bottom v Best Fit Scales Units mem Harizontal Length Scale so Vertical Depth Scale x Cancel Elevation Units These are the units to use when specifying the top and bottom elevations The units can be either meters or feet Top Elevation This is the top elevation of the cross section The elevation can be specified or the best fitting elevation used The best fit elevation is determined from the boreholes used in the actual cross section and may vary for each cross section Bottom Elevation This is the bottom elevation of the cross section The elevation can be speci fied or the best fitting elevation used The best fit elevation is determined from the boreholes used in the actual cross section and may vary for each cross section Scale Units This is the units to use for the horizontal and vertical scales of the cross section The units can be either m cm m in ft cm or ft in Horizontal Length Scale This 15 the horizontal scale of the cross section It relates real world coordinates with page coordinates For example if the scale units are m cm and the scale is 5 then 5m in real coordinates would equal 1 cm on the page The vertical and horizontal scales can also be adjusted when editing a cross section to make sure that all the data fits on the page Vertical Depth Scale This is the vertical
136. o this field will not appear Point Color This is the color of the data points To change the color press the Color button a Color form will be displayed This form can be used to select a basic color or a custom color If the Point Type is set to none this field will not appear WinFence User 5 Guide 145 Templates Background Shade This is used to specify whether the background behind the graph will be shaded or transparent If the background is not shaded the cross section strata will appear behind the graph Background Color This is the color to shade the background When the Background Color but ton 1s pressed a Color form will be displayed This form can be used to select a basic or custom color Position Tab Cross Section Style X Horizontal Axis Vertical Axis Scales Borehole Position Intersecting Cross Sections x Cancel Help The Position tab shown above is used to specify the following information Left This is the position of the left border of the cross section in inches or millimeters from the left side of the page The units of measurement is specified in the page layout Right This is the position of the right border of the cross section in inches or millimeters from the left side of the page The units of measurement is specified in the page layout Top This is the position of the top border of the cross section in inches or millimeters from the top of the page The uni
137. on The units of measurement are specified in the location map grid settings Background Color This 15 the background color of the paragraph text box When the Back ground color button is pressed a Color form 1s displayed Using this form a basic color can be selected or a custom color can be specified Frame Select yes to display a frame around the paragraph text Frame Width This is the line width of the frame around the paragraph text If no frame is selected above this field will not be displayed Frame Color This is the color of the frame to display around the paragraph text When the Frame Color button 1 pressed a Color form is displayed Using this form a basic color can be selected or a custom color can be specified If no frame is selected above this field will not be displayed North Arrow Button The North Arrow Button allows the user to place a north arrow anywhere on the location map To use the North Arrow button click on the button and then click on the location where you would like the north arrow to appear Once you have clicked on the location map and released the mouse button the North Arrow form on the next page will be displayed WinFence User 5 Guide 49 Projects Pi North Arrow Form 0 xl North Arrow Information N N A eh N 5 Rectangle Information N Left 378 Right 245 Top 823 Bottom 696 M4 n4X x Cancel Help The following can be edited from this form
138. on will email the information to GAEA support when you are finished filling out the form Other Methods to Contact Technical Support To expedite support services we prefer electronic communications through email or the Internet These communications minimize the possibility for any mistakes and allow us to better track your request You can email technical support by selecting the Email Technical Support menu item from the Help menu This menu item will create an email message using your default email pro gram WinFence User 5 Guide 185 To connect to GAEA s Internet site select the GAEA s Web Site menu item from the Help menu Below are the various methods to contact technical support Service Contact Method Web Site http Wwww gaea ca E mail support gaea ca Phone 905 666 7527 FAX 905 666 3744 Mail GAEA Technologies Ltd 87 Garden Street Whitby Ontario Canada 9 7 After receiving your communication GAEA will respond promptly with either the solution to the problem or a schedule for solving the problem Before Contacting GAEA Before contacting technical support we suggest you try the following to help us resolve your problem Determine if the problem is specific to the cross section you are creating Does it occur with other templates or other cross section Does the problem occur every time or intermittently f you have another PC does the problem occur on it 186 WinFence Us
139. or of the boreholes wells for the fence diagram When the button 1s pressed a select color form will be displayed Strata Outline This is the line style used to outline the strata in the fence diagram To change the line style click on the Line button Borehole Outline This is the line style used to outline the boreholes in the fence diagram To change the line style click on the Line button Outline Boreholes When checked the boreholes on the fence diagram will have an outline drawn around them 72 WinFence User 5 Guide Cross Section Data Strata Data x Name Fill Top Boundary Bottom Boundary Stored Where v UseCurve Fit C Haste 6 Project Multiple Segments Name Sand 4 Cancel L T Type ayer 7 Help T Arial 8 m B z u as gi TakeFill Description Y Cross Section Data Cross sections are used to depict the geology and stratig raphy of the subsurface Typically cross sections intersect several boreholes and possibly other cross sections that may or may not be along a straight line The stratigraphic information from the boreholes and intersecting cross sections is combined with other knowledge of the area to generate the cross section WinFence can be used to graphically create detailed full color cross sections easily and quickly The program can be used to interpret and map soil and rock layers conta mination fossils minerals and hydrocarbons In ve
140. p Always Suggest X Close WinFence User 5 Guide 175 Libraries Symbol Tab The Symbol tab is used to create and edit the symbols At the left side of the tab there 1s a toolbar used to edit the symbol The buttons on the toolbar perform the following actions Symbol Descriptions Description sgl 4 X Cancel Help The Clear button is used to erase the current symbol and provide a blank page The Import Picture button is used to import a bitmap picture from a file into the current symbol When this button 1 pressed the Open bitmap form will be displayed Select the bitmap file to import and then press the Open button The Erase button 1 used to delete parts of the symbol When this button is pressed the cur z sor will change to an eraser To erase a part of the symbol hold the left mouse button down and move the cursor over the area to be erased e The Fill button is used to fill regions of symbols When this button 1 pressed the cursor will change to a paint can To fill an area click inside the region The Undo button is used to undo the previous edit operation 176 WinFence User 5 Guide Editing a Library The Curve button is used to draw a curved line on the symbol When pressed the cursor will 5 change to a pencil To draw a curve hold down the left mouse button and move the mouse When finished drawing the line release the mouse button
141. page layout Right This is the position of the right border of the bitmap in inches or millimeters from the left side of the page If the Bitmap button on the toolbar is used to create the bitmap this field will not be displayed If Stretch Bitmap is set to No then this field will not be displayed Top This 15 the position of the top border of the bitmap in inches or millimeters from the top of the page If the Bitmap button on the toolbar is used to create the bitmap this field will not be dis played If Stretch Bitmap 1 set to then this field will not be displayed Bottom This 15 the position of the bottom border of the bitmap in inches or millimeters from the top of the page If the Stretch Bitmap is set to No or Maintain Aspect Ratio is set to Yes then this field will not be displayed and the bottom will be calculated by the program Center X This is the bitmap s horizontal center in inches or millimeters from the left side of the page If Stretch Bitmap is set to Yes this field will not be displayed If the Bitmap button on the toolbar is used to add the bitmap this field will be filled in by the program Center Y This is the bitmap s vertical center in inches or millimeters from the left side of the page If Stretch Bitmap is set to Yes this field will not be displayed If the Bitmap button on the toolbar is used to add the bitmap this field will be filled in by the program Sizing and Movin
142. pically used to add comments to a cross section Adding Paragraph Text There are two methods that can be used to add a Paragraph Text box to a template 1 Click on the Paragraph button on the Toolbar Next click on the location of the upper left corner of the paragraph text box Then while holding the left mouse button down drag the mouse to the location of the lower right corner After the button has been released the Paragraph Text form shown in the section below will be displayed 2 Select the Paragraph Text menu item from the Edit menu or Popup menu and then click on the Add button on the Paragraph Text form This will create a new paragraph Using this method the location of the paragraph must be specified on the form as described below 152 WinFence User 5 Guide Paragraph Text Editing Paragraph Text Existing Paragraph data can be edited by selecting the Paragraph Text menu item of the Edit or Popup menus or by clicking the left mouse button inside the paragraph on the template The Para graph Text form below will then be displayed The following information can be specified on this form Paragraph Text 11 1 zu Positi A 45 GAEA Technologies Cross Section Profile Background Color No C Yes wv Ok X Cancel Text This is the text for the paragraph There is no limit to the length of the text The Rich Text too
143. position of the cross section can be changed using the Cross Section Style form or the mouse To adjust the size using the mouse click on a border and drag it to its new location To move the cross section position the mouse in the center of the cross section and drag it to its new location Scale Bar The cross section can contain an optional scale bar that graphically depicts the horizontal scale This scale bar can be customized and positioned anywhere on the page To edit the position and style of the scale bar select the Scale Bar menu item from the Edit or Popup menu The Scale Bar form shown below will then be displayed iS Scale Show Scale Bar Center Y Height Length Divisions The following information can be specified on the Scale Bar form Show Scale Bar Check to show the scale bar on the page If unchecked the information below will not be displayed Title This is the title to use above the scale bar up to 255 characters Center X This is the horizontal location of the center of the scale bar from the left side of the page in inched or millimeters The measurement units are specified in the page layout 148 WinFence User 5 Guide Location Map Center Y This is the vertical location of the center of the scale bar from the top of the page in inched or millimeters The measurement units are specified in the page layout Length This is the horizontal length of the scale bar in the same units as
144. r is used to create the rectangle this position will be filled in by the program Bottom This is the position of the bottom border of the rectangle in inches or millimeters from the top of the page If the Rectangle button on the toolbar is used to create the rectangle this posi tion will be filled in by the program Line Style This is the style of the rectangle border The line style can be changed by pressing the Line Style button a Line Properties form will be displayed Using this form the style color and width of the rectangle can be set Fill Color This is the color to use to fill the inside of the rectangle When the Fill Color button 15 pressed a Color form will be displayed Using this form a basic color can be selected or a custom color can be specified Sizing and Moving Rectangles The size and position of a rectangle can be changed using the Edit Rectangle form or the mouse To adjust the size using the mouse click on a border and drag it to its new location To move the rectangle position the mouse in the center of the rectangle and drag it to its new location 162 WinFence User 5 Guide Page Layout Page Layout The page layout 15 used to set the paper size and orientation for the printed cross section To change the page layout select the Page Layout menu item from the Edit or Popup menu The Page Setup form below will be displayed IS Page Layout Page Size Letter Width 11 Units jin m Height 8 5
145. rm below will be displayed Strata Legend Available Strata Strata In Legend Contaminated Zone Sandy Silt Till Ground Surface Clayey Sand gt v Strata can be added to the legend in the template and in the cross section Strata added to the leg end in the template will be shown in all cross sections that use that template Whereas strata that are added in the cross section will only be shown in the cross section The Strata in Legend form 1 used to specify the following information Available Strata This lists the available strata in the master and project databases that can be included in the legend Strata in Legend This lists the strata currently included in the legend gt The Right arrow is used to add the selected strata to the legend The Left arrow is used to remove the selected strata 4 The order of the strata in the list will determine the order they are displayed in the legend The Up arrow is used to move the selected strata up in the legend The Down arrow is used to move the selected strata down in the legend WinFence User 5 Guide 93 Cross section Data Title Bar The title bar is used to display general information about the cross section This can include infor mation such as project name location date client name etc There 15 no limit to the number of data items that can be displayed To edit the Title Bar select the Title Bar menu item from the Edit or Cross Section Pop
146. rsion 2 fence diagrams can now be displayed and manipulated Fence diagrams are used to show a 3 dimensional representation of one or more cross sections that may or may not intersect In this chapter the creation and editing of cross sections is described In chapter 5 the creation and editing of fence diagrams 15 described A wide variety of strata can be used to create cross sec tions using WinFence Types of strata that can be used include layers faults lenses intrusions and alteration zones Very detailed and complicated stratigraphy can be represented and easily drawn Layers can contain multi ple segments to represent unconformities and erosion in highly faulted zones Creating a New Cross Section In version 2 there is the option to have the program automatically generate the cross section This is done using artificial intelligence AI built into the program When determining how to connect the strata between boreholes wells and intersecting cross sections the program looks at the simi larities in the lithologies thicknesses and occurrence of the strata This methodology works well with most geologies except where the geology is very complicated or there are faults In addition the program s AI will not be able to determine alteration zones However these zones can be added and the strata can be edited after the cross section has been generated Also new in version 2 is the ability to display and use deviated boreholes a
147. se select the Main Database List menu item from the Restore Backup Database submenu of the Projects submenu from the File menu The Select Backup Database form will be displayed The Select Backup Database form lists all the backup databases for the main database The date time information indicates the date and exact time at which the project list database was backed up Select the database you wish to restore and then press the Ok button Setting Project Passwords It maybe advantageous for some companies to create Projects that have a password associated with them In this way accidental editing or deleting of boreholes can be avoided since only employees knowing the password to the project would be able to open or edit it Project password locking is done by selecting the Change Password menu item from the Projects submenu of the File menu This will open the Change Password form Change Project Password Current Password New Password Confirm New Password Af OK Cancel Help 64 WinFence User 5 Guide Setting Program Preferences There are three editable fields on this form Current Password The current password of the project If the project doesn t currently have a password then leave this blank New Password The new password of the project If you want to remove the old password then set this to blank Confirm New Password The new password again of the project If you want to remove the old password then se
148. section The Open button is used to open an existing cross section The speed buttons below will be dimmed if no cross section 1s currently opened Eg x 4 8 d The Close button is used to close a cross section The Save button is used to save changes to the cross section The SaveAs button is used to save the cross section under a different name The Print button is used to print the cross section The Undo button is used to undo changes to the cross section The Zoom in button is used to expand the cross section The Zoom out button is used to shrink the cross section The Full Screen button is used to reset the zoom factor to full screen The Water Level button is used to draw edit and delete water levels The Paragraph Text button is used to add paragraph text to the cross section The Bitmap button 15 used to add a bitmap to the cross section The Line button is used to draw lines and arrows on the cross section ii The Polyline button is used to draw polylines on the cross section 16 The Rectangle button is used to draw rectangles the cross section WinFence User 5 Guide Toolbars The Change Template button is used to change the template that is used to format the cross section A VB Template Toolbar I E DG E B B a C The Template Toolbar is displayed below and is used to edit templates Each of the speed bu
149. splayed select Yes to continue and the Restore Project Database Form will be displayed 62 WinFence User 5 Guide Managing a Project Database Restoring an Individual Project Database When the Individual Project menu item is selected from the Restore Backup Database submenu the Restore Individual Project Database form below will be displayed This form allows you to select the project that your would like to restore Select WinFence Project Name Directoy CompletedT utorial WinLoG Samples WinFence Tutorial WinFence Example 1 WinFencel2 WinFence Example 2 Samples WinFence Tutorial WinFencel WinFencel2 WinFence2 WinFence3 WinFence Example 3 Completed WinLoG Tutorial Cancel C Program Files GAEA D utorial C Program Files GAEA D atabase S amples C Program Files GAEASD atabase WinFence Tutorial C Program Files GAEA D atabasexWw inF ence C Program Files GAEA Dealer database WinFencel C Program Files GAEA D atabase WinFence2 C Program Files GAEA D atabase WinFence3 4 b M Help After a project has been selected the Select Backup Database form below will be displayed This form lists all the backup databases for an individual project The date and time information indi cates the date and exact time at which the project databases were backed up Select Backup Database Date Time Information 11 8 2004 4 36 03 PM 11 8 2004 4 46 03 PM 11 8 2004 4
150. ss section Auto Generate Strata When checked the program will use it s built in intelligence to create the strata for a new cross section This works very well for most normal geologies however it may not work well for complex geology or faulting Use Intersecting Cross Sections When checked intersecting cross sections will be used when auto generating the strata of a new cross section The intersecting cross sections are treated like additional wells when generating the cross section strata If the Auto Generate Strata box is not checked this box will be disabled Use Auto Generate Strata Message When checked a message will be displayed when a new cross section 1s created asking whether to auto generate the strata If the Auto Generate Strata box is not checked this box will be disabled WinFence User 5 Guide 71 Projects Fence Diagram Tab Preferences Directories Scales Auto Backups Other Section Generation Fence Diagrams Display Options Background Color gt Borehole Color D B Strata Outline N Line Borehole Outline Line Rendering ptions Outline Boreholes X Cancel Help The following parameters can be set on the Fence Diagram tab shown above Background Color This is the color of the screen background for the fence diagram When the button is pressed a select color form will be displayed Borehole Color This is the col
151. surement are specified on the Units tab Minor Tic Interval Line Style Button Clicking the Line Style button opens a Line Properties form on which the user can user select the type of axis line they would like on the location map Font Button The Font button allows the user to edit the size of the axis font Clicking on the but ton opens up the Font Style form Fence Line Tab The Fence Line tab shown on the next page controls the appearance of the cross sections on the location map The following information can be entered and edited using this tab X Offset This is the offset in feet or metres of the labels from the beginning and end of the fence lines in the horizontal direction The units of measurement are specified on the Units tab Y Offset This is the offset in feet or metres of the labels from the beginning and end of the fence lines in the vertical direction The units of measurement are specified on the Units tab Line Style Button Clicking the line style button opens a Line properties form on which the user can user select the type of fence line representation they would like on the location map WinFence User 5 Guide 55 Projects Font Button The Font button allows the user to edit the fence line font Clicking on the button opens up the Font Style form This form allows the user to change the font font size font color and font style Location Map Setup Scale Units Grid Map Axis f
152. t Lines Orientation Line Style C Diagonal 2 Arrow Horizontal Arrowhead No C Yes C Vertical Position x n 0 65 End 79 0 65 M4 n X X Cancel Help WinFence User 5 Guide 103 Cross section Data The following information can be entered and edited using this form Orientation This is the orientation of the line either diagonal horizontal or vertical If the orien tation is set to horizontal the vertical position will be set to the y position of the start of the line If the orientation 1 set to vertical the horizontal position will be set to the x position of the start of the line Start X This is the horizontal position of the start of the line in inches or millimeters from the left side of the page If the Line button on the toolbar is used to create the line the program will fill in this field Start Y This is the vertical position of the start of the line in inches or millimeters from the top of the page End X This is the horizontal position of the end of the line in inches or millimeters from the left side of the page End Y This is the vertical position of the end of the line in inches or millimeters from the top of the page Line Style This is the style of the line The line style can be changed by pressing the Line Style button A Line Properties form will be displayed Using this form the style color and width of the line can be set Arrowhe
153. t location map that can be used to display and edit boreholes or wells if WinLoG has been installed cross sections and fence diagrams In addition site features and AutoCAD files can also be displayed The project location map can also be printed to be included with the boring logs Editing a Borehole To edit a borehole or well in the project just double click on it on the location map If you have WinLoG installed the selected borehole or well will be displayed in WinLoG Adding a Cross Section To add a new cross section to the project click on the New button on either the Section SEC or Location Map LOC toolbars The New Cross Section NEW toolbar will be displayed See Chapter 4 for how to use this toolbar to create a new cross section Editing a Cross Section To edita cross section in the project just double click on it on the location map The selected cross section will then be displayed Location Map Toolbar The display and editing of the project location map is controlled using the LOC toolbar on the right side of the map This toolbar has several buttons which are described in the following sec tions Label Font Button The Font button is used to specify the font to use for the borehole well labels When this button 1s pressed a Font form is displayed This form can be used to select the type face style size and color of the font WinFence User 5 Guide 39 Projects
154. t the first of the Title Bar When the Title Font button is pressed a Font form will be displayed This form can be used to select the type face size and color of the font Left This 1 the position of the left border of the Title Bar in inches or millimeters from the left side of the page The units of measurement is specified in the page layout Right This is the position of the right border of the Title Bar in inches or millimeters from the left side of the page The units of measurement is specified in the page layout Top This is the position of the top border of the Title Bar in inches or millimeters from the top of the page The units of measurement is specified in the page layout Bottom This is the position of the bottom border of the Title Bar in inches or millimeters from the top of the page The units of measurement is specified in the page layout Sizing and Moving the Title Bar The size and position of the title can be changed using the Template Title Bar form or the mouse To adjust the size using the mouse click on a border and drag it to its new location To move the title bar position the mouse in the center of the title bar and drag it to its new location Legend The legend is used to display the strata used in the cross section and their descriptions The layout and initial strata to include in the legend can be specified in the template Additional strata can be added to the legend after the cross section is
155. t this to blank Opening a Password Locked Project To open a project that has been password locked simply follow the same procedure as a user would normally follow to open a project This will open up the Password form if the project 1s password locked otherwise the project will open normally Enter Project Password Please enter the password for the project WinFencel Password X Cancel Help Setting Program Preferences Using the Preferences menu item of the File menu preferences for file directories and display characteristics can be set for the WinFence program When this menu item 15 selected the Prefer ences form is displayed This form has seven tabs used for setting program preferences WinFence User 5 Guide 65 Projects Directories Tab Dther Section Generation Fence Diagrams Directories Scales AutoBackups Database Directory JEAPROGRA I GAEA database l Bitmap Directory CAPROGRA T GAEANWINFEN T Bitmaps l Default Directory EAPROGRA7TWGAEANWINFENT Temporary Directory c SPROGRA 1SGAEANSWINFEN 1 WinLoG Program cAProgram Files GAEA WinLoG Winlog exe fs Cancel Help The following parameters can be set on the Directories tab Database Directory This is the directory where the Master Project Database is located It should only be changed if the database has been moved The directory can be changed by entering the new directory or
156. tain an unlimited number of boreholes and well logs Cross sections can contain an unlimited number of layers lenses intrusions faults and alteration zones Boundaries can be snapped to other layers faults or intrusions Layers can contain multiple segments and may be discontinuous Points defining strata boundaries can be graphically edited and deleted Templates can be customized and re used Lithologic descriptions for legends are stored in the master or project databases and can be reused An unlimited number of lithologic symbols can be used to represent different horizons more than 100 are supplied with the program Bitmaps lines text and rectangles anywhere on the cross section Full color printing of cross sections Cross sections can be exporting to the clipboard bitmap files or metafiles WinFence User 5 Guide vii W ntroduction viii WinFence User Guide Getting Started Copyright 2000 All Right Reserved GAEA Technologies Register A Continue i uma Tree Ww Ue Getting Started Before you begin working with the WinFence program you should Check the contents of your distribution package Make sure you have the necessary equipment Run the installation program Read the README file Start the WinFence program Un hk Register the WinFence program Th
157. template Left This is the position of the left side of the location map in inches or millimeters from the left side of the page The units of measurement are specified in the page layout WinFence User 5 Guide 149 Templates Location Map Show Location Map Line Style gt Fill Color Selected Features Selected Boreholes Unselected Borehole Show All Boreholes Show Selected Boreholes bu Font EEUU Show Current Cross Section Show ll Cross Sections Symbol Size Symbolsize 24 Show Rectangles Show Ellipses o D Color Show Lines ME eter Current Cross Section p Other Cross Sections Show Polygons Show Grid Sue FFE Show Axis Label Font Label Font X Cancel Right This is the position of the right side of the location map in inches or millimeters from the left side of the page Top This 15 the position of the top of the location map in inches or millimeters from the top of the page Bottom This is the position of the bottom of the location map in inches or millimeters from the top of the page Margin This is the size of the margin in inches or millimeters between the borders of the loca tion map and the plotting area of the map Title This 1s the optional title to use for the location map up to 255 characters Title X This is the horizontal position of the
158. that project The number of boundaries a strata has depends on the type of strata Layers have a top and bottom boundary Faults lenses alteration zones and intrusions have only one boundary These bound aries can be defined by a series of points on the cross section or by the boundaries of other strata The cross section can also contain paragraph text lines bitmaps and rectangles When these fea tures are added to the cross section they will only appear on the cross section in which they are added To have them appear on all cross sections they need to be added to the template The editing of the cross section is described in the sections below The first three sections describe the creation and editing of strata in detail since this will comprise the majority of the editing of the cross section In version 2 a new Strata Toolbar shown below has been added to make the editing of strata eas ier The use of this toolbar is described in the sections below 1 5 e x H Select Strata 82 WinFence User 5 Guide Editing Cross Section Selecting Strata Before a strata can be edited it needs to be selected The strata can be Select Strata selected using the Select Strata button on the Strata toolbar or using the Strata submenu on the Popup menu When a cross section is created the ground surface strata is automatically generated and added to the strata list Unless the auto generate strata option was used to cre
159. the area to generate the cross section WinFence can be used to graphically create detailed full color cross sections and fence diagrams quickly and eas ily The program can be used to interpret and map soil and rock layers contamination fossils minerals and hydrocarbons A wide variety of strata can be used to create cross sec tions in WinFence Types of strata that can be used include layers faults lenses intrusions and alteration zones Very detailed and complicated stratigraphy can be represented and easily drawn Layers can contain multi ple segments to represent uncomformities and erosion in highly faulted zones Before using the WinFence program it is recommended that the tutorial in this chapter be completed This tutorial will give you a basic understanding of how to use the WinFence program It describes how to select a project enter the cross section data and print the cross section It is recommended that while you read this tutorial you perform the actual procedures discussed using the Win Fence program The program includes the WinFence Tutorial project and template that are referred to in this chapter Selecting a Project This tutorial describes how to Select a project Create a new cross section Enter the title bar data Edit the strata Save the cross section Print the cross section Mo fs Display the Fence Diagram Each of these steps 1s discussed in deta
160. the desired symbol and then press the Ok button amp Print Button The Print Location Map Button allows the user to print the project location map Clicking the but ton opens up a standard print dialog that allows the user to select the print range and the number of copies More advanced print properties can be set by clicking print properties on the Properties button Most printers allow you to change things such as the Print Quality Paper Type Paper Size Paper Orientation Paper Color etc New Cross Section Button To add a new cross section to the project click on the New button on either the Section SEC or Location Map LOC toolbars The New Cross Section NEW toolbar will be displayed See Chapter 4 for how to use this toolbar to create a new cross section a Zoom In Button The Zoom In button allows the user to zoom in the field of view to a specific area To zoom into a specific area all the user needs to do is click on the Zoom In button on the toolbar Next using the left mouse button click on the location of the upper left corner of the desired viewing area Then while holding the left mouse button down drag the mouse to the location of the lower right corner of the viewing area Then release the mouse button Once the mouse button is released the new viewing area is shown Zoom Out Button The Zoom Out button allows the user to zoom out from the users field of view by 5096 each time the button is clicked
161. the horizontal scale of the cross section Divisions This is the number of divisions to show on the scale bar The color of the scale bar will alternate between divisions Font This is the font to use for the scale bar title When the Font button is pressed a Font form will be displayed This form can be used to select the type face color size and style of the font Fill Color This is the color to use when filling the alternating divisions on the scale bar When the Color button is pressed a Color form will be displayed This form can be used to select a basic color or specify a custom color Sizing and Moving the Scale Bar The size and position of the scale bar can be changed using the Scale Bar form or the mouse To adjust the size using the mouse click on a border and drag it to its new location To move the scale bar position the mouse in the center of the scale bar and drag it to its new location Location Map The optional location map is used to show the position of the cross section in plan view This view is similar to that shown when specifying the cross section path The position size and style of the location map can be customized in the template To edit the location map select the Location Map menu item from the Edit or Popup menu The Location Map form shown on the next page will be displayed The following information can be entered on the Location Map form Show Location Map Check to display the location map on the
162. tion of the bottom border of the rectangle in real grid coordinates either feet or meters If the rectangle button on the toolbar is used to create the rectangle the position will be filled in by the program otherwise the user will have to enter in the position Line Style Clicking the Line Style button opens a Line properties form on which the user can user select the Line Style Solid Dashed Dash Dot etc thickness and color of the line Fill Color Clicking the Fill Color button open up the Color form from which the user can select the color they wish to have on the interior of the rectangle C Ellipse Button The Ellipse button allows the user to place an ellipse anywhere on the location map To draw an ellipse click on the Ellipse button then click and hold down the left mouse button at the upper left hand corner of the ellipse and drag the cursor across the screen to the bottom right hand corner of the ellipse Once this is done the program will open the Edit Ellipse form below Edit Ellipses Ellipses A Line Style Fill Color M4 n4X Cancel Help WinFence User 5 Guide 45 Projects The following can be edited on this form Left This is the position of the left border of the ellipse in real grid coordinates either feet or meters If the Ellipse button on the toolbar is used to create the ellipse the position will be filled in by the program otherwise the user will have to
163. tions and symbols for each layer sample data well completion details water level measurements geophysical logs and numer ous graphs and text columns WinFence can be used to graphically create detailed full color cross sections easily and quickly The program can be used to interpret and map soil and rock layers conta mination fossils minerals and hydrocarbons See Chap ter 4 for a detailed description on how to create and edit cross sections This chapter describes how to 1 Create a fence diagram Modify the display Print the fence diagram Save the fence diagram display Aa U N Close a fence diagram Creating a Fence Diagram Creating a Fence Diagram g Fence diagrams are used to depict the geology and stratigraphy of the subsurface in three dimensions Typically fence diagrams show several cross sections that may intersect as well as boreholes and wells Before a fence diagram can be displayed the cross sections must e created using the information from the boring and well logs See Chapter 4 for a detailed descrip tion on how to create and edit cross sections After one or more cross sections have been created it is very easy to create and display a fence diagram for the project Either click on the Fence Diagram button on the Project toolbar or select the Fence Diagram menu item from the View menu The Display Fence Diagram form below will be displayed x JA Cancel Cross Section N
164. title in inches or millimeters from the left side of the page Title Y This is the vertical position of the title in inches or millimeters from the top of the page 150 WinFence Users Guide Location Title Font This is the font to use for the title When the Title Font button is pressed a Font form will be displayed This form can be used to select the type face size color and style of the font Line Style This is the style of line to use for the border of the location map When the Line Style button is pressed a Line Properties form is displayed This form can be used to specify the line style width and color Fill Color This 15 the background color of the location map When the Fill Color button is pressed a Color form 15 displayed This form can be used to select a basic color or specify a cus tom color Selected Features Check the boxes to display each feature on the location map Selected Boreholes Label Font This is the font to use for the labels of the selected boreholes those appearing on the cross section Selected Boreholes Symbol Size This is the size of the well symbol to use for the selected bore holes Typically between 10 and 20 Selected Boreholes Color This is the color of the well symbol to use for the selected boreholes Unselected Boreholes Label Font This is the font to use for the labels of the unselected bore holes those not appearing on the current cross section Unselected Borehol
165. to find information on line rather than by using this manual Both sources will pro vide the same information but are organized somewhat differently Help will appear in a separate window with its own menu bar and controls as shown below This chapter describes how to 1 Display help 2 Use help 3 Get technical support Displaying Help Displaying Help There are several ways to access the Help System these are Press the Help button To display the help contents at any time press the help button on the Toolbar Click a Help button in a form For more information on using a particular form click the Help button Choose a command from the Help menu The Help menu offers several options Contents displays the same Help Contents that appear when you press F1 with no com mands highlighted Search displays the Search dialog box and a list of keywords you can use to find topics About WinFence gives information about the program including the 3 digit version number required by technical support Using Help You can move back and forth between topics or search through the entire help system for the topic you want Topics that are underlined can be displayed by clicking on them and topics that have dotted underlines can have their definition displayed by clicking on them The tabs on the Help form are used for the following Contents displays the complete Table of Contents of the Help System Index is used to
166. ts of measurement is specified in the page layout 146 WinFence User 5 Guide Cross Section Bottom This is the position of the bottom border of the cross section in inches or millimeters from the top side of the page The units of measurement is specified in the page layout Intersecting Cross Sections Tab Cross Section Style Horizontal Axis Vertical Axis Scales Borehole Position Intersecting Cross Sections Intersecting Cross Sections Cross Section ID Label Cross Section Symbol Top C Top Size 10 ZA Bottom Font C Bottom C None None Border Style x Cancel Help The Intersecting Cross Sections tab shown above is used to specify the following information Cross Section ID Label This determines t he placement of the intersecting cross section ID as either on top below or none The Font button is used to change the font for the ID Cross Section Symbols This determines the placement of the intersecting cross section symbols as either on top below or none The size and color of the symbols can also be changed Border Style This is the style of the line used to draw the border around the intersecting cross section When the Border button is pressed a Line Properties form will be displayed This form can be used to specify the line width color and style WinFence User 5 Guide 147 Templates Sizing and Moving the Cross Section The size and
167. ttons on the toolbar 15 explained below New button is used to create a new template 2 The Open button is used to open an existing template The speed buttons below will be dimmed if no template 1s currently opened gg The Close button is used to close a template The Save button is used to save changes to the template 2 The SaveAs button is used to save the template under different name amp The Print button is used to print the template 3 The Undo button is used to undo changes to the template A The Zoom in button is used to expand the template The Zoom out button is used to shrink the template The Full Screen button is used to reset the zoom factor to full screen 100 The Paragraph Text button is used to add paragraph text to the template WinFence User 5 Guide 17 Getting Started s The Bitmap button is used to add a bitmap to the template The Line button is used to draw lines and arrows on the template The Rectangle button is used to draw rectangles on the template Symbol Library Toolbar incus The Symbol Library Toolbar is displayed below and is used to edit symbol libraries Each of the speed buttons on the toolbar is explained below New button is used to create a new symbol library 57 The Open button is used to open an existing symbol library The speed buttons below will be dimmed if no symbol library is currently opened BS The Close button is used
168. u from the Projects submenu Then select either to com pact and repair the main database or a project database If a project database is selected the Com pact Project Form below will be displayed Compact Project uxe Name Diemy i CompletedT utorial Completed WinLoG Tutorial C Program Files GAEA D atabasexCompletedT utorial Samples WinLoG Samples C Program Files GAEA Database S amples WinFence Tutorial WinFence Tutorial C Program Files GAEA D atabaseSW inFence Tutorial WinFence Example 1 C Program Files GAEA D atabase WinFencel WinFencel2 C Program Files GAEA Dealer database WinFencel WinFence Example 2 C Program Files GAEA D atabase WinFence2 WinFence Example 3 C Program Files GAEA D atabase WinFence3 4 X Cancel Help Select the project database you wish to compact and then press the Ok button Backing Up a Database WinFence has the ability to automatically backup all databases at regular intervals while the user is editing and creating new templates logs and projects You can decide how often you would like to backup your data To set the time intervals between backups select the Preferences menu item from the File menu This option is described in the Preferences section below Restoring a Database Restoration of a backed up database is very simple Select the Individual Project menu item from the Restore Backup Database submenu of the Projects submenu from the File menu A confirma tion message will be di
169. ult dataset name will be the one specified in the template 96 WinFence User 5 Guide Paragraph Text Geophysical Columns DER Column 3 Paragraph Text Floating paragraph text boxes can be added anywhere on a cross section These text boxes are dis played over top of any information on the cross section There is no limit to the number of para graph text boxes that can be displayed Paragraph text boxes are typically used to add comments to cross section Adding Paragraph Text There are two methods that can be used to add a Paragraph Text box 1 Click on the Paragraph button on the Toolbar Next click on the location of the upper left corner of the paragraph text box Then while holding the left mouse button down drag the mouse to the location of the lower right corner After the button has been released the Paragraph Text form shown in the section below will be displayed 2 Select the Paragraph Text menu item from the Edit menu or Popup menu and then click on the Add button on the Paragraph Text form This will create a new paragraph Using this method the location of the paragraph must be specified on the form as described below WinFence User 5 Guide 97 Cross section Data Editing Paragraph Text Existing Paragraph data can be edited by selecting the Paragraph Text menu item of the Edit or Popup menus or by clicking the left mouse button inside the paragraph on the template The Para graph Text form b
170. undaries for the Delete Strata strata can be edited interactively using the mouse or specified with the keyboard using the Edit Properties menu item Use Existing Strata gt Add Boundary The number of boundaries a strata has depends on the type of strata Fong Layers have a top and bottom boundary Faults lenses alteration Edit Points zones and intrusions have only one boundary These boundaries ain Points be defined by series of points the cross section or by the boundaries of other strata If the strata has a top and bottom bound Cancel ary then the Use Existing Strata Add Boundary Add Points Edit Points and Delete Points menu items will be submenus that can be used to select either the top or bottom boundary Otherwise these menu items will automatically select the boundary of the strata Previous menu When adding or editing a boundary interactively using the mouse the current editing can be can celed by clicking the right mouse button and selecting Cancel on the Edit Strata popup menu In addition the current editing can be completed by selecting Done on the popup menu If the Previous Menu menu item is selected the strata will no longer be selected The next time the right mouse button 1 clicked the Cross Section popup menu will be displayed bg Edit Properties To edit the properties of the selected strata either click on the Edit Properties button on the Strata toolbar or se
171. up menu The Cross Section Data form below will be displayed New and edited data up to 255 characters can be entered on the input lines to the right of the data type Cross Section Data Location i Edit Data Ll ap 28 Cancel Help The template being used for the cross section will determine the types of data to be entered To change the type of data press the Edit Data Type button at the bottom of the form The Edit Data Type form shown below will be displayed This form will also be displayed when a new input line is inserted ri Edit Data Type 9 Select Data Type Location X Add New Data X Cancel Help 94 WinFence User 5 Guide This form can be used to select a different data type from the template or to enter a unique new data type Care should be used in changing the data type since it will affect where the data 1 dis played If a new data type is added it will only be displayed if the exact same data type appears in the template Data types are case sensitive and use exact spelling Scales The horizontal and vertical scales together with the elevations are used to determine the size of the cross section on the page These scales and elevations are initially set in the template However when the cross section 15 created there 1s the option to have the scales automatically adjusted so that the entire cross section will fit on the page To edit the sc
172. up menu contains the following commands pe Save saves the cross section in the database Print prints the cross section Select Strata Close closes the cross section Drawing Order Select Strata displays a submenu that can be used to add or Legend select a strata for editing Title Bar Drawing Order used to change the drawing order of the Scales strata Geophysical Log Legend used to select strata to show in the legend Paragraph Text Title Bar used to enter data for the title bar Bitmaps Scales used to set the horizontal and vertical scales and ele Lines vations Rectangles Paragraph Text used to add edit and delete paragraph text on the cross section Bitmaps used to add edit and delete bitmaps on the cross section Intersecting Cross sections Water Level LocationMap Lines used to add edit and delete lines and arrows on the cross section Rectangles used to add edit and delete rectangles on the cross section Intersecting Cross sections used to select which intersecting cross sections to display 12 WinFence User 5 Guide Using WinFence Water Level used to add edit and delete water levels Location Map used to edit the extents of the location map Strata Edit Popup Menu If a strata has been selected on the cross section the Strata Edit Popup Menu will be displayed This popup menu contains the following commands Edit Properties used to
173. ure the copyright notices Term This License Agreement is effective from the date of purchase by the Licensee of the Licensed Product and shall remain in force until terminated The Licensee s rights to use the Licensed Product will terminate if the Licensee fails to comply with any of the terms or conditions of this License Agreement Upon such termination the Licensee shall return the Licensed Product to the Distributor immediately Limited Warranty If the Licensee finds a Licensed Product diskette to be defective in materials or workmanship which shall not include problems relating to the nature or operation of the Licensed Product under normal use the Distributor will replace it free of charge within one year following the date of purchase Any request for replacement of a defective diskette must be accompanied by the origi nal defective diskette The Licensed Product is provided as is without warranty of any kind either expressed or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose The Distributor does not warrant that the func tions contained in the program will meet your requirements or that the operation of the program will be uninterrupted or error free Neither the Distributor nor anyone else who has been involved in the creation or production of this product shall be liable for any direct indirect incidental special or consequential damages whether arising out
174. utton allows the user to place a rectangle anywhere on the location map To draw a rectangle click on the Rectangle button then click and hold down the left mouse button at the upper left hand corner of the rectangle and drag the cursor across the screen to the bottom right hand corner of the rectangle After the mouse button is released the Edit Rectangles form below Edit Rectangles Rectangles A Line Style Fill Color M 4 b Wn TX X Cancel Help 44 WinFence User 5 Guide Using the GIS Interface The following can be edited from this form Left This is the position of the left border of the rectangle in real grid coordinates either feet or meters If the Rectangle button on the toolbar is used to create the rectangle the program will fill in the position otherwise the user will have to enter in the position Right This is the position of the right border of the rectangle in real grid coordinates either feet or meters If the Rectangle button on the toolbar is used to create the rectangle the position will be filled in by the program otherwise the user will have to enter in the position Top This is the position of the top border of the rectangle in real grid coordinates either feet or meters If the Rectangle button on the toolbar is used to create the rectangle the position will be filled in by the program otherwise the user will have to enter in the position Bottom This is the posi
175. yle of the cross section either click on the cross section or select the Cross Section menu item from the Edit or Popup menu The Cross Section style form on the next page will then be displayed This form has six tabs for the Horizontal Axis Vertical Axis Scales Borehole Posi tion d Intersecting Cross Sections 138 WinFence User 5 Guide Cross Section Horizontal Axis Tab Cross Section Style x Borehole Position Intersecting Cross Sections Horizontal Axis Vertical Axis Scales Horizontal Axis None Title Distance Top Major Interval so Show Grid Lines Minor Interval fi 0 Font Both Axes Line Style From Both Axes Font Line Style x Cancel Help The Horizontal Axis tab shown above can be used to specify the following information Horizontal Axis This is used to specify which horizontal axes to draw It can be set to none top only bottom only or both Show Grid Lines If checked vertical grid lines will be at the specified major interval Title This is the optional title to use for the axis up to 255 characters Major Interval The major interval determines the interval between grid lines and axis labels The interval is specified in the same units specified in the Scales tab Minor Interval This is the tic interval along the axis Axes Font This is the font to use to draw the horizontal and vertical axes titles and labels When the Axes Font

Download Pdf Manuals

Related Search

Related Contents

* 一ノ ~~辛~~  AEG T 520 Clothes Dryer User Manual  Elite Screens ZR800D remote control  Vox VT15 User's Manual  LC/MS Agilent série 6000  取扱説明書  B-SAFE™ - The Bob  FPSTFN7700 - Magazine Luiza  CIRCULAR Nº 102 ASUNTO: CURSO TRABAJO  SINGER® - Alza.cz  

Copyright © All rights reserved. Failed to retrieve file