Home

ca

1. Operating Instructions Fischione 1020 Plasma Cleaner 1 Open the main gas supply tank valve 2 Adjust the regulator knob so the gauge reads 10 psig Note failure to turn on the supply gas at the required pressure will result in damage to the plasma cleaner 3 Ensure the unit is plugged into the wall socket 4 Turn on the unit with the small on off switch located on the back of the instrument beside the power cable connection 5 Ifa sample holder or blank is installed in the plasma cleaner chamber port and the HIGH VACUUM indicator is lit the instrument will need to be vented prior to loading your specimen i Press the VENT button on the front panel wait until the ATMOSPHERE indicator is lit ii Gently remove the specimen holder or blank from the plasma cleaner chamber port 6 Load your specimens TEM or SEM on the appropriate holder re install holder in plasma cleaner chamber port 7 Press the PUMP button on the front panel wait until the HIGH VACUUM indicator is lit 8 Enter cleaning time in minutes seconds using the numerical buttons on the front panel 9 Press SET to begin plasma cleaning The minutes seconds display will flash for a short while as the instrument starts up Once cleaning begins the time will count down and the purple plasma glow will be visible through the glass window on the side of the instrument tower 10 Once the timer hits zero press VENT to vent the chamber to atmospheric pressure wait unti
2. l the ATMOSPHERE indicator is lit 11 Gently remove specimen holder 12 When finished cleaning place a specimen holder or blank into the plasma cleaner chamber port press PUMP button on the front panel 13 Once the HIGH VACUUM indicator is lit turn off the instrument with the small on off switch located on the back of the instrument beside the power cable connection The instrument will remain at high vacuum until the next use 14 Turn off the main gas supply tank valve

ca

Contents

Download Pdf Manuals

Related Search

Related Contents