User manual, Bellman Visit Baby-Cry Transmitter (GB
Contents
1. for approx one year When the indicator lamp flashes yellow the batteries need to be changed Range The range between the transmitter and receivers is approx 30 m but is influenced by the thickness of the walls and the wall materials in the house apartment Thick concrete and metal walls limit the range Radio channel On delivery all units are set to the same radio channel If you change the channel in the baby cry transmitter you must also change the channel in all other Visit units Adjustments There are switches to change the radio channel inside the battery compartment The radio channel is changed by changing the position of one or several of the radio switches There are also delay switches inside the battery compartment More information about the delay switches is placed on the back of the battery lid Trouble shooting A fault is not always serious Follow the trouble shooting chart below before calling for service Symptom The indicator lamp flashes yellow when the units is active The indicator lamp shines green but the Bellman receiver does not respond The baby cry transmitter will not transmit although the baby is screaming The baby cry transmitter transmits if the baby just makes low noises The baby has to scream for a long period of time before the baby cry transmitter sends signals to the receiver The baby cry transmitter transmits although the baby just makes a short sound Procedure C2. User manual Bellman Visit Baby Cry Transmitter GB u A Bellman Visit Baby Cry Transmitter is part of the Visit System Bellman Visit Baby Cry Transmitter sends signals to Bellman Visit receivers when activated by the sound of a crying baby This is what to do 1 Open the battery compartment on the back of the baby cry transmitter Install two 1 5 V LR 14 alkaline batteries and choose delay time on the delay switch G Put back the battery lid 2 To turn the unit ON and OFF use slide switch D This is also the sensitivity selection switch and has the following positions 1 On High sensitivity 2 On Medium sensitivity 3 On Low sensitivity OFF 3 Place the baby cry transmitter on a table by using the enclosed tablestand or on a wall close to the baby but keep it out of the baby s reach The microphone B should be pointing towards the baby Miscellaneous Indicator lamp On the front of the baby cry transmitter there is an indicator lamp which flashes green when the unit is set to one of the sensitivity positions This indicates that the unit is active The indicator lamp shines green when the baby cry transmitter sends signals to the Bellman receivers When the indicator lamp flashes yellow the batteries need to be changed Battery The baby cry transmitter is powered with two 1 5 V LR14 alkaline batteries which is placed under the battery lid on the back of the unit The batteries will last
3. hange batteries in the baby cry transmitter 1 Check that the baby cry transmitter and the receiver are set to the same radio channel 2 Check the battery in the receiver Increase the sensitivity button 4 or place the baby cry transmitter closer to the baby Decrease the sensitivity button 4 or place the baby cry transmitter further away from the baby Shorten the delay time Please refer to information inside the battery lid Increase the delay time Bellman Visit Baby cry transmitter sends radio signals during 2 sec when activated The power of the radiosignal corresponds to one per thousand of the power used by a standard cellular phone Product description A Indicator lamp B Microphone C Test button D Sensitivity switch OFF switch E Wall fixture F Battery lid G Delay switch H Radio switch Address Our office hours are Telephone 46 31 682820 Bellman amp Symfon AB Mon Fri 08 00 12 00 12 45 16 30 Fax 46 31 682890 S dra Langebergsgatan 30 Homepage www bellman com 421 32 VASTRA FROLUNDA Sending us company e mail info bellman symfon se Sweden
Download Pdf Manuals
Related Search