2C Frame IT Cinema Flocked Frame Screen Installation Manual
Contents
1. Step 6 There is a S latch on the bottom wall mount only Fig 16 er Up Bracket Stee Bottom Bracket Secure Button Fig 16 Step 7 Fix the mounts onto the wall separately Fig 17 18 For 95 height h 1260mm amp 105 height h saait A Up Bracket Z Bottom Bracket Fig 17 Step 8 Hook screen onto the top mount and bottom mount Fig 19 20 ANY Fig 19 Fig 20 Step 9 To uninstall the screen please press the latch towards the wall to release bottom frame from bottom mount then lift the screen a little to release it totally from top and bottom groove of the mounts Fig 21 22 a nnm ti Fig 21 Fig 22 Happy Viewing Protecting Your Screen Keep away from direct sunlight or high temperatures Examine both the front and back surfaces before retracting into the case to make sure it is free of dust dirt insects or other foreign matter Use a soft brush or cloth to lightly remove any foreign particles Cleaning Your Screen Do not use any solvents chemicals or abrasive cleaners on the screen surface Use a mild detergent with warm water to remove any marks on the surface or screen case Always immediately dab the screen with a soft cloth to avoid soap marks Do not scrub the surface Warranty 12 Months For more information please go to www 2cdisplays com au or call 1300 730 025 2C_FramelT_Cinema_Flocked_Mar11_v1 1 2C Fra2. me IT Cinema Flocked Frame Screen Installation Manual Required not supplied Electric Drill 3 x Screws Screw Driver to suit Wall Supplied Horizontal Frame x 2 Corner Brackets Top Mount x 1 amp Vertical Frame x 2 x 4 Fixing Lug 10mm Corner Bottom Mount x 1 95 x 24 105 x 28 Screw Q gt Side Tensioning Horizontal Tension 25x 40mm Tapping Bar x 2 ing Bar x 2 Screw oe x8 Step 1 Lay each section of the frames on a tidy flat surface Fig 1 a Horizontal Frame a Vertical Frame Fig 1 Step 2 Slide Fixing Lugs into grooves on the reverse side of frames Fig 2 3 Fixing Lug Fig 2 Step 3 Insert both horizontal and vertical frame sections with the cor ner stakes Ensure all joints are square and then lock off by tightening with the screws provided Fig 4 7 Corner Step 4 Unfold screen fabric and insert the tensioning bars into the fab ric grooves Fig 8 10 Fig 8 Step 5 Align fixing lugs and the eyelets provided on the fabric Using the tensioning bar pull fabric eyelets over the lugs Tip Arrange horizontal tensioning bars first then side tensioning bars Fig 11 15
Download Pdf Manuals
Related Search