QNN SAFE AUSTRALIA PTY LTD PRODUCT USER MANUAL
Contents
1. 6 digits Manager code 6 digits operate in CEU factory setting 123456 CEU operation pls check the CEU instruction manual 3 With code hidden function 4 Holde 5mins of keypad after 3 times wrong trying Opening First opening install 4 AA batteries into the external battery case plug in the outlet which behind the Brand position level shift the Brand position from right to left Second to pressing the Handle button make handle up Third Press on the panel to wake up the safe back light on you can see the number clearly Input original code 1234 and gt You will see OPEN if the code is correct Then it will show OPENED Pull the handle to left Clockwise direction the door can be opened When you see the safe show E CODE that means your code is wrong Remove the batteries from the external battery case to the battery case on the back of the door you can use the safe without the external power supply now Close the door Push the drawer to close position press to wake up the safe and input your code 4 6 digits then press again the panel shows CLOSE then CLOSED the drawer is closed automatically Code setting 1 CHANGE MANAGER CODE Please refer to CEU user manual 2 CHANGE PERSONAL CODE Under open situation press the then input your new code within 4 6 digits and press gt again to show CLOSED Now you will see your new code on the displayer which means your2. o 2500 Displayed with 3 beeps means it is a wrong code try 3 continual wrong code tries will be held for 15 minutes Cautions After the Holding is activated there is no way to de activate the Holding within the 15 minutes period HOLD then displayed to indicate the remaining holding time in minutes Closing instructions Push the drawer at closed position rD activate the system then res Oan until safe is automatic locked Cautions This will keep the code unchanged for next openings Changing Code Please keep the drawer at open position during the whole processing until fully ensure that the code is changed correctly For security reasons please change to your own code after the first opening Your code can be set up from 4 to 6 digits Open the drawer and ensure that the lock is in unlocked position Press nel on the front screen to activate the system Input your new own digital code from 4 to 6 digits then sess lad o BORDIN Then displayed with 2 beeps and the locking bolts are driven to locking position which indicate that the code is changed successful Using the New Code to unlock the bolts and remember the code Page 2 of 5 QNN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www gnnsafe com au Email info qnnsafe com au Phone 02 87982669 Emergency Backup In an emergency saturation safe can be opened by
3. the Emergency key Override the digital lock The key whole is located right hand side of the front panel to expose the key hole you need to screw off the material plug Then turn the master key counter clockwise to unlock the drawer You need to reset a new code after open the safe using Emergency Key To reset the code Keep the Emergency key at counter clockwise position Press the the front screen to activate the system Input your new digital code from 4 to 6 digits then ae gt CLOSED Then displayed with 2 beeps and then LO BAT displayed which indicate that the code is changed successful Keep the Drawer opened turn the Emergency Key clockwise Using the New Code to unlock the bolts and remember the code Other features Code hidden function To activate the function rows then press lt twice nen again To de activate Repeat the above steps Cautions Do not store the Emergency Keys and the External Battery Box inside the safe When the LO BAY display with 3 beeps it means that the batteries need to be replaced Please replace new batteries as soon as possible Function of safe Page 3 of 5 QNN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www gnnsafe com au Email info qnnsafe com au Phone 02 87982669 Double code system user code and master code 1 User code 4 6 digits Factory setting 1234 2 Master code
4. ONN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www qnnsafe com au Email info qnnsafe com au Phone 02 87982669 ONN Safe USER S MANUAL FOR M 2045UZH SERIES WITH AUDIT TRAIL SYSTEM This package contents User manual 1 External Battery Box 2 Bolt Down Screws 4 AA Batteries 2 Emergency back up Keys Please contact your retailer or Qnn Safe Australia P L if any shortage occurred For the first time use it needs the external battery power support Insert the supplied 4 AA batteries into the External Battery Box Connect the power to the front panel The power inlet is located next to the QNN nameplate Please slid the nameplate sideward to expose the hole After the safe is opened please replace the batteries into the internal battery box which is located behind the door plate please slid the box cover sideward to open After enter the right code turn the handle knob clockwise Safe is new unlocked This safe is operated by the digital code The factory setting for the digital code is 1 23 45 6 QNN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www gnnsafe com au Email info qnnsafe com au Phone 02 87982669 Opening instructions Press nel on the front screen to activate the system Enter the code and then oe gt Factory setting code 123456 OPEN displayed with 2 beeps
5. closed it will show LO BAT on the displayer 3 lt q is also a deletion key press one time will delete one digit input Page 5 of 5
6. operation succeeds Tips After you change the code please do not close the door or turn the handle at once Follow the below steps at least 3 times to make sure your new code is work Press the back light on input your new code and gt The safe will beep one time if the Page 4 of 5 QNN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www gnnsafe com au Email info qnnsafe com au Phone 02 87982669 code 1s correct you can see OPENED That means the new code work now If the code is wrong the safe show E CODE and you will hear beep 3 times Please follow the steps of CODE SETTING to change the code again Emergency opening If you have forgotten your personal code or for other reasons the safe cannot be opened you can use the emergency key or CEU to open the door Code hidden function Press to wake up the safe then input lt button two times and gt one time you will hear beep two times It comes into hidden code function Repeat above steps the code will be recovered Code digits will be show as L Cautions 1 HOLD If you input an incorrect code 3 times the keypad will be held for 15 minutes During this period there will be no response when pressing any key and show HOLD Digit the digit is the holding time After 15 minutes 1t will recover its normal situation 2 LOW VOLTAGE When it lowers than 5V whether the door is open or
Download Pdf Manuals
Related Search