Installation manual VIP MINI
Contents
1. lluting to the environment Unauthorized disposal of the foregoing waste material is punishable by law2. p the fluorescent lamps of proper power into the holders rotate the lamp by 90 degrees holding it in the middle put the diffuser and flaps in ZARZADZANIE JAKOSCIA ISO 9001 2008 PXF Lighting 73 Jutrzenki Street lr PXE LIGHTING 02 230 Warszawa 48 22 33 44 000 48 22 33 44 033 Important warnings The manufacturer cannot be considered liable for any damages deriving from improper wrong and unreasonable use of the fitting Luminaries may be installed by qualified personnel only Any manipulation inside the luminaire when power supply is on causes the risk of electric shock Manufacturer is not responsible for any flaws caused by avoid using this manual Manufacturer reserves a right to change the construction of the product Do not assembly in places without air circulation To guarantee safety of luminaire functions please assembly according to instruction The European Directive 2002 96 EC on waste electrical and electronic equipment requires that electric and electronic devices must be disposed of in the normal household waste The crossed out wheeled bin is reproduced in order to remind obligations towards separate collection For correct disposal please use authorized waste disposal facilities or return to the distributor at the date a new lighting fitting is purchased Lamps if disposed together with the lighting fitting shall not be broken up since they contain substances which are highly po
3. rPXE LIGHTING T 48 22 33 44 000 48 22 33 44 033 PXF Lighting 73 Jutrzenki Street 02 230 Warszawa 230V 50HZ Installation manual VIP MINI VIP Mint i ton ly wae 121 39 15 128 54 T5 installation on the wall screw wall fixing to the wall with wall plugs screw wall fixing to fixture in bush controls with a M8 screw suspended installation screw universal suspension on to the ceiling screw the electric suspension on to the ceiling a turn off the power in the circuit where the fixture will be installed b pull the diffuser and flaps out of fixture c put the connector in the fixture in case of installation of the lighting line d screw the line regulators in the set with electric suspension to the fixture in case of suspended versions e pull the feeding cable through the hole in the base of a fixture f connect the feeding wires as shown on the cube g if the fixture is adjustable and has a emergency module connect it s wire to separate dedicated cube h installation on the wall on the ceiling installation on the ceiling connect the upper part of ceiling assembly to ceiling screw the down part of ceiling assembly to fixture into bush control with a M8 screws put the lower part of the assembly into upper part of the assembly and screw them with a two M4 screws pull the lines through the line regulators and adjust i installation of the lamps sli
Download Pdf Manuals
Related Search