USER MANUAL
Contents
1. COLOR CHANNEL 1 CHANNEL 2 CHANNEL 3 RED 255 0 0 GREEN 0 255 0 BLUE 0 0 255 CYAN 0 255 255 YELLOW 255 255 0 MAGENTA 255 0 255 e RF REMOTE CONTROL RF Versions only Please refer to the RF Remote Control User Manual for detailed information Red Light red Green Light green Blue Light blue Speed speed Color Mode Sequence Modes Function Modes 1 FS ES an off gt Memory Button MA Ppa Pause Mode e Turn on off the light gt Sequence Modes Chill S1 Motion S2 Action S3 gt Function Modes Random Ft Fusion F2 Pulse F3 Rave F4 Ray F5 Moments F6 6 CARE AND MAINTENANCE Traxon products are of superior design and quality and should be treated with care The recommendations below will help fulfill and warranty obligations and gain good use and longevity from the products Make sure that the products are installed correctly and securely For indoor use only Keep products in a dry and precipitation free area as this may damage the products electronics Keep products in a dirt and dust free environment Make sure the products are not exposed to extreme heat and that they have sufficient airflow and cool air circulation if required Do not attempt to service or repair the products unless done by an authorized service personnel Conta2. EPS Om CREATIVE LIGHTING TECHNOLOGIES USER MANUAL COVE LIGHT 12 SMD RGB STRIP 12 SMD RGB Please check for the latest updates and changes on the TRAXON website TRAXON TECHNOLOGIES 2006 ALL RIGHTS RESERVED WWW TRAXONTECHNOLOGIES COM HONG KONG NEW YORK PARIS TOKYO RIO DE JANEIRO FRANKFURT MELBOURNE SHANGHAI Smart Chip Version 1 2 Manual Version 1 1 BIRMINGHAM ROTTERDAM USER MANUAL INDEX 1 INTRODUCTION P1 2 CONTENTS P2 3 SAFETY AND OPERATION P2 3 4 PRODUCT DESCRIPTION P3 4 5 INSTALLATION AND SYSTEM CONFIGRATION P4 9 5 1 MOUNTING P4 5 5 2 DATA CONNECTION P5 6 5 3 POWER CONNECTION P7 8 5 4 CONTROL P9 6 CARE AND MAINTENANCE P10 7 TECHNICAL SPECIFICATION P10 FOR YOUR OWN SAFETY AND THAT OF THE PRODUCT PLEASE READ THIS USER MANUAL CAREFULLY BEFORE BEGINNING SET UP AND INSTALLATION 1 INTRODUCTION COVE LIGHT 12 SMD RGB 1PXL DMX MO CL 52701 STRIP 12 SMD RGB 1PXL DMX MO ST 50101 COVE LIGHT 12 SMD RGB 1PXL RF MO CL 22701 STRIP 12 SMD RGB 1PXL RF MO ST 20101 COVE LIGHT12 SMD RGB 1PXL SLAVE MO CL 02701 STRIP 12 SMD RGB 1PXL SLAVE MO ST 00101 These products are part of the Traxon Modules product line enabling the use of RGB LED color changing systems in a linear configuration On board SMART CHIP technology used in the DMX Versions with the powerful feature of Auto Addressing enables fast and easy setup and installation High power LED techno
3. 240VAC POWER SUPPLY IMPORTANT NOTE DC POWER CONNECTION PLEASE BE SURE TO FOLLOW THE POWER IN AND POWER OUT MARKINGS WHEN CONNECTING AS FAILURE TO DO SO WILL RESULT IN THE PRODUCT NOT WORKING AND COULD CAUSE DAMAGE TO THE FIXTURES VOIDING THE WARRANTY FIG 9 FIG 9 POWER OUT POWER IN For the DC power connection a maximum of 35 COVE LIGHT 12 SMD RGB and or STRIP 12 SMD RGB fixtures can be connected to any 1 System Power Supply 320W In 1 daisy chain configuration a maximum of 28 COVE LIGHT 12 SMD RGB and or STRIP 12 SMD RGB are allowed as well as a maximum DC cable span of 15m starting from the System Power Supply connection terminals to the ast fixture in the chain Please refer diagram below FIG 10 FIG 10 EACH DAISY CHAINED CONNECTION CAN CONNECT MAX 28 UNITS MAX SPAN 15 M Ll SSeS moze ATddNS JIMOd WALSAS ApZ 60000 Sd 9V POWER CABLE CONNECTION NOTE ONE 24V POWER SUPPLY 320W CAN CONNECT MAX 35PCS COVE LIGHT STRIP CAUTION PLEASE ENSURE THAT THE POWER IS SWITCHED OFF WHEN THE DATA CABLES ARE BEING CONNECTED 5 4 CONTROL e DMX 512 DMX Versions only CHANNEL 1 RED DMX VALUE 0 255 CHANNEL 2 GREEN DMX VALUE 0 255 CHANNEL 3 BLUE DMX VALUE 0 255 DMX VALUES TO ACHIEVE SET COLORS
4. DO NOT USE PIN 5 PIN 5 WHITE BLUE PIN 5 DO NOT USE PIN 6 PIN 6 GREEN PIN 6 DO NOT USE PIN 7 PIN 7 WHITE BROWN PIN 7 DO NOT USE PIN 8 PIN 8 BROWN PIN 8 DO NOT USE CAUTION THE DMX DATA INPUT CONNECTOR PIN ASSIGNMENT MUST MATCH THE ABOVE DETAILS FAILURE TO DO SO WILL RESULT IN THE PRODUCT NOT WORKING AND COULD CAUSE DAMAGE TO THE FIXTURES VOIDING THE WARRANTY 5 3 POWER CONNECTION The Cove Light 12 SMD RGB and Strip 12 SMD RGB range use an external 24V DC system power supply For connection of the mains AC input cable with the 24V DC output please refer to the diagram below FIG 8 FIG 8 LIGHT GREY WHITE 100 240VAC f N J f I I A A A a A EA A ii k LIGHT GREY WHITE VE BLACK SPADE BRS RED SPADE VF a S Important notes The manufacturer accepts no responsiblilty for any malfunction or damage which is casued by incorrect electrical installation GES Y es 0 The electrical connection of the power supply should only be carried MS ol LIVE WARE out by a certified electrician crounnwere narina wae AL PS 00009 DC power cable to Strip Cove Light AC power cable 100
5. D LIGHT SOURCE AT CLOSE RANGE FOR YOUR OWN SAFETY ANY PERSON INSTALLING THIS PRODUCT SHOULD COMPLY WITH LOCAL STANDARDS AND REGULATIONS AND MUST BE QUALIFIED FOR THE HANDLING OF ELECTRICAL EQUIPMENT An ambient operating air temperature range of O C 50 C 32 F 122 F must be adhered to at all times If the fixture has been subjected to drastic temperature variances e g following transportation do not connect the fixture until it has reached room temperature as internal condensation build up may damage the fixtures electronics When installing the fixtures and system power supplies in the chosen locations please ensure that they will not be exposed to moisture extreme heat or direct sunlight and that it is in a dirt and dust free environment keeping the fixtures and system power supplies within their operating boundaries Please study all functions in this User Manual throughly and check the latest Technical Specifications Sheets available from our website www traxontechnologies com before set up 4 PRODUCT DESCRIPTION The Cove Light 12 SMD RGB and Strip 12 SMD RGB are part of the MODULES product line and features include low power consumption high light output with a wide even beam angle and an option of DMX512 with SMART CHIP technology or RF remote control The SMART CHIP is a world first technology that includes the powerful feature of DMX auto start addressing and channel selection e MASTER MAS
6. TER DMX Versions COVE LIGHT 12 SMD RGB DMX and STRIP 12 SMD RGB DMX are referred to as MASTER fixtures with control via DMX512 with SMART CHIP technology Once the primary MASTER has been selected subsequent MASTER models can be added with individual control via DMX The on board SMART CHIP automatically assigns DMX start addresses to all connected MASTER fixtures upon powering up of the system e MASTER SLAVE DMX amp RF Versions COVE LIGHT 12 SMD RGB DMX COVE LIGHT 12 SMD RGB FF and STRIP 12 SMD RGB DMX STRIP 12 SMD RGB RF are all referred to as being MASTER fixtures with control via DMX512 with SMART CHIP technology or via RF remote control depending on the model chosen Using them together with the SLAVE versions COVE LIGHT 12 SMD RGB SLAVE or STRIP 12 SMD RGB SLAVE the MASTER SLAVE control relationship is utilized for simultaneous color change of all fixtures with only the MASTER receiving the control signal and then sending the same signal to the other fixtures in the daisy chain 5 INSTALLATION AND SYSTEM CONFIGURATION 5 1 MOUNTING 5 1 1 COVE LIGHT 12 SMD RGB FIG 1 For installation use the M3 screws provided for mounting to a flat surface FIG 1 Select the desired position and fasten the screws in place taking care not to fix too tightly but enough to hold the Cove Light firmly in place On the Cove Light base you will find a hex screw for fixing the b
7. a maximum of 170 MASTER fixtures can be connected together in a daisy chain configuration The on board SMART CHIP technology is used to automatically assign the DMX start addresses once all data connections are made and when powering up the system power supply supplies FIG 6 FIG 6 MAX 170 UNIIS SPAN 100M HEE ome HH DMX 512 CONTROLLER MASTER MASTER MASTER MASTER MASTER Go me g en Fe SS e MASTER SLAVE DATA CONNECTION For MASTER SLAVE data connections a maximum of 99 SLAVE fixtures can be connected to 1 MASTER fixture in a daisy chain configuration FIG 7 FIG 7 MAX 100 UNITS SPAN 100M HEHE oom HHH SLAVE SLAVE SLAVE SLAVE MASTER a va mm aeo aaa DMX 512 CONTROLLER e DMX512 CONTROLLER A RJ45 INTERCONNECTION CABLE B PIN OUT CONFIGURATION A B 345 B PIN RJ45 8 PIN VIEW FACING PINS DATA CABLE VIEW FACING PINS a CAT 5 UTP 24AWG 4 PAIR y PINT FOR INTERCONNECTION BETWEEN COVE LIGHT STRIP DMX DATA INPUT CONNECTOR PIN 8 PIN RJ45 CABLE IS REQUIRED ASSIGNMENT FOR BOARD COVE LIGHT STRIP Bi PIN 1 USUALLY WHITE ORANGE PIN I DATA PIN 2 PIN 2 USUALLY ORANGE PIN 2 DATA PIN 3 PIN 3 USUALLY WHITE GREEN PN 3 GROUND PIN 4 PIN 4 BLUE PIN 4
8. ct the local Traxon office or distributor for details Do not drop knock or shake the products as rough handling may damage the electronics and void the warranty Do not use harsh chemicals cleaning solvents or strong detergents to clean Wipe with a damp cloth on housings and a dry cloth on electronics to remove dirt or dust If the products are not working correctly please contact your nearest authorized service centre or Traxon office for assistance 7 TECHNICAL SPECIFICATIONS COVE LIGHT 12 SMD RGB 8 STRIP 12 SMD RGB Color Range 16 7 million of additive RGB colors with variable intensity Light Source Ultra Bright SMD LED Source Life 50 000 hours under normal operating conditions Beam Angle 120 Power Input 24VDC Current Consumption 0 375A max Power Consumption 9W max Operating Temperature Range 0 C 50 C 32 F 122 F 10
9. eam angle FIG 2 8 3 When using the provided 3mm Hex Key M3 Screw FIG 2 FIG 3 Swivel lamp body i 03 take care not to fix too tightly as PT E ory E N overtightening can damage the N 5 Nw H L USE HEX KEY PROVIDED Pea fixture TO LOCK THE HINGE Timm 2 80 DO NOT FIX TOO TIGHTLY 5 1 2 STRIP 12 SMD RGB FIG 4 For installation first place the nylon Nylon spacer spacers provided into the mounting holes on the bottom side of the Strip then use the M3 screws to mount to a flat surface Select the desired position and fasten the screws in place taking care not to fix too tightly but enough to hold it firmly in place FIG 4 M3 screw 5 2 DATA CONNECTION Data connection is via the RJ45 sockets on the fixtures and the RJ 45 CAT5 patch cable that is supplied with each fixture For connection as per the diagram follow the DATA IN and DATA OUT marking on the bottom of the fixture and firmly connect the cables in a daisy chain configuration FIG 5 FIGS DATA OUT DATA IN IMPORTANT NOTE DATA CONNECTION PLEASE BE SURE TO FOLLOW THE DATA IN AND DATA OUT MARKINGS WHEN INTERCONNECTING TWO FIXTURES AS FAILURE TO DO SO WILL RESULT IN THE PRODUCT NOT WORKING AND COULD CAUSE DAMAGE TO THE FIXTURES VOIDING THE WARRANTY e MASTER MASTER DATA CONNECTION For MASTER MASTER data connection
10. logy combined with low power consumption brings the best solution possible for any number of applications COVE LIGHT 12 SMD RGB e 180 Position Adjustment 51 5 295 e 12 Ultra Bright SMD LED of Eu Bor e DMX or RF Control Options EN A eh ele ED e Auto Addressing DMX Version Only a e SMART CHIP DMX Version Only peep ma Lamp bese e RJ45 Cat5 Data Cabling eS 1 eer E Cm STRIP 12 SMD RGB e 12 Ultra Bright SMD LED ATA OUT SOCKET DATA IN SOCKET e DMX or RF Control Options g p Ea y re T e Auto Addressing DMX Version Only I POWER IN SOCKET OPTIONAL DMX RF MODULE e SMART CHIP DMX Version Only A e RJ45 Cat5 Data Cabling a re A RGB SMD LED 159 5S 2 E ro o0 o0 o o nou o tl 288 av POWER OUT SOCKET 2 CONTENTS COVE LIGHT 12 SMD RGB MO CL 52701 MO CL 22701 MO CL 02701 Oi 1 X DC Power Cable 1 X 3mm Hex Key 1 X Cove Light 12 SMD RGB 1 X RJ45 Data Cable 2 X M3 Screw STRIP 12 SMD RGB MO ST 50101 MO ST 20101 MO ST 00101 Ci SS 1 X DC Power Cable 2 X M3 Screw 1 X Strip 12 SMD RGB NE O IQ gt 1X RJ45 Data Cable 2 x Nylon Spacer 3 SAFETY AND OPERATION CAUTION UNPLUG THE POWER SUPPLY FROM MAINS POWER BEFORE CONNECTING ANY CABLES AS THIS CAN DAMAGE THE PRODUCTS CAUTION AVOID LOOKING DIRECTLY INTO THE LE
Download Pdf Manuals
Related Search