MH-x200 Pro Spot moving head user manual
Contents
1. 55 Operation Channel 12 13 14 th mann MUSIC IS OUR PASSION 56 Value 204 219 220 237 238 255 Focus 0 255 Aperture 0 63 64 127 128 191 192 255 Prism 0 7 8 15 Function Gobo 9 shake increasing speed Rotation clockwise increasing speed Rotation counter clockwise increasing speed Focussing Open close iris diaphragm manually Automatic zoom increasing speed Slow zooming in fast zooming out Fast zooming in slow zooming out White Static prism moving head Operation Channel Value Function 16 127 Rotating prism rotation clockwise 128 239 Rotating prism rotation counter clockwise 240 255 Static prism 15 Channel dependent functions 0 9 Free 10 14 Blackout during rotation and inclination 15 19 Blackout during colour wheel movement 20 24 No blackout during colour wheel movement and during rotation and inclination 25 29 Blackout during Gobo wheel movement 30 34 No blackout during Gobo wheel movement and during rotation and inclination 35 39 No blackout during colour wheel or Gobo wheel movement 40 44 No blackout during colour wheel or Gobo wheel movement and during rotation and incli nation MH x200 Pro Spot th mann MUSIC IS OUR PASSION 57 Operation Channel Value Function 45 49 Reset rotation 50 54 Reset inclination 55 59 Reset colour wheel 60 64 Reset aperture 65 69 Reset Gobo 1 70 74 Reset Gobo rotation 752. Pan range 540 360 Pan range 360 and 780 Pan range 180 When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC moving head 30 Operation Tilt range Press MODE ESC repeatedly until the display shows Tilt Angle Press ENTER to open this menu item Now use UP and DOWN to determine the Tilt range Choose between 270 Tilt range 270 780 Tilt range 180 and 90 Tilt range 90 When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC Operating mode DMX Press MODE ESC repeatedly until the display shows Channel Press ENTER to open this menu item Now use UP and DOWN to select one of the following DMX operating modes 11 channel display shows Basic or 16 channel display shows Advanced This setting is only relevant if the device is controlled via DMX When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC Temperature display Press MODE ESC repeatedly until the display shows Temp Display Press ENTER to let the display show the
3. 79 80 99 100 119 120 139 140 159 160 179 180 199 Function Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 2 shake increasing speed Gobo 3 shake increasing speed Gobo 4 shake increasing speed Gobo 5 shake increasing speed Gobo 6 shake increasing speed Gobo 7 shake increasing speed MH x200 Pro Spot Operation th mann MUSIC IS OUR PASSION 53 Operation Channel 10 11 th mann MUSIC IS OUR PASSION 54 Value Function 200 219 Gobo 8 shake increasing speed 220 237 Rotation clockwise increasing speed 238 255 Rotation counter clockwise increasing speed Gobo rotation 0 10 No rotation 11 127 Fixed position from 0 to 360 128 191 Rotation clockwise increasing speed 192 255 Rotation counter clockwise increasing speed Gobo wheel 2 static 0 9 Open 10 19 Gobo 2 20 29 Gobo 3 30 39 Gobo 4 moving head Channel Value 40 50 60 70 80 90 92 T 108 124 140 156 172 188 49 59 69 79 89 91 107 123 159 155 171 187 203 Function Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 9 Open Gobo 2 shake increasing speed Gobo 3 shake increasing speed Gobo 4 shake increasing speed Gobo 5 shake increasing speed Gobo 6 shake increasing speed Gobo 7 shake increasing speed Gobo 8 shake increasing speed MH x200 Pro Spot Operation th mann MUSIC IS OUR PASSION
4. Normal normal rotational direction When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC MH x200 Pro Spot themann MUSIC IS OUR PASSION 29 Operation Tilt inversion Display duty cycle Pan range th mann MUSIC IS OUR PASSION Press MODE ESC repeatedly until the display shows Tilt Press ENTER to open this menu item Now use UP and DOWN to toggle between Reverse inverse direction of inclination and Normal normal direction of inclination When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC Press MODE ESC repeatedly until the display shows Display Press ENTER to open this menu item Now use UP and DOWN to toggle between Bright display permanently on and 30 Close display shuts off when no button is pressed for 30 seconds When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC Press MODE ESC repeatedly until the display shows Pan Angle Press ENTER to open this menu item Now use UP and DOWN to determine the Pan range Choose between 540
5. current LED temperature Press MODE ESC to quit the menu MH x200 Pro Spot th mann MUSIC IS OUR PASSION 31 Operation System reset Loading default values 7 3 Settings menu th mann MUSIC IS OUR PASSION Press MODE ESC repeatedly until the display shows Reset System Press ENTER to open this menu item Now use UP and DOWN to select one of the following options NO or OK Select OK and press ENTER to reset all moving axes the Gobo wheels and the Colour wheel to their home positions Press MODE ESC repeatedly until the display shows Load Set Press ENTER to open this menu item Now use UP and DOWN to select one of the following options NO or OK Select OK and press ENTER to reset all parameters to their factory default values Press MODE ESC for at least five seconds to activate the settings menu Use UP and DOWN to enter the password 2323 Use the UP button to change the digit on the cursor position the DOWN button moves the cursor to the next position Press ENTER when all digits are entered Press MODE ESC twice to quit the settings menu All previously done settings are saved even if you disconnect the device from the mains power supply moving head 32 Rotation alignment Inclination alignment Colour wheel alignment Operation Activate the settings menu Press MODE ESC repeatedly until the display shows Pan Init Press ENTE
6. gobos Gobo wheel 2 moving head z o a a x 2 fo m 9 u 2 c v Ke ruj 38 Operation 7 5 Menuoverview 1 DMX Address lt 2 Run 3 Pan lt 4 Tilt lt 5 Display lt 6 Pan Angle lt 2 Run 3 Pan 4 Tilt 5 Display 6 Pan Angle 7 Tilt Angle 1 DMX Address 2 Run 3 Pan 4 Tilt 5 Display 6 Pan Angle Set Address 001 Select Fast Select Normal Select Normal Select Bright Set Address 540 2 Run 3 Pan 4 Tilt 5 Display 6 Pan Angle Select Slow Select Reserve Select Reserve Select 30 Close Select 360 2 Run 6 Pan Angle Select Sound Select 180 2 Run Select Slave i i i i l MH x200 Pro Spot th mann MUSIC IS OUR PASSION 39 Operation 7 Tilt Angle lt 8 Channel lt 9 Temp Disp lt 10 Reset System lt 8 Channel 9 Temp Disp 10 Reset System 11 Load set 7 Tilt Angle 8 Channel TI 10 Reset System Select 270 Select Advance 50 Select No 7 Tilt Angle 8 Channel 10 Reset System Select 180 Select Basic Select OK 7 Tilt Angle Select 90 11 Load set 1 DMX Address Init Motor Set Password 0000 11 Load set Select No 11 Load set Select OK themann moving head MUSIC IS OUR PASSION 40 Operation 6 Gobo 2 Init 7 Focus Init 6 Gobo 2 Init Set 128 1 Pan Init lt 2 Tilt Init 1 Pan Init Set 128 2 Tilt Init lt 3 Color Init 2 Tilt Init Set 128 3 Color Init 4 Gobo 1 In
7. near vicinity of the device it must remain turned off NOTICE Risk of overheating The distance between the light output and the illuminated surface must be more than 0 5 m 19 7 in Always ensure sufficient ventilation The ambient temperature must always be below 40 C 104 F MH x200 Pro Spot th mann MUSIC IS OUR PASSION 11 Safety instructions NOTICE Risk of fire Do not cover the device nor any ventilation slots Do not place the device near any direct heat source Keep the device away from naked flames NOTICE Operating conditions This device has been designed for indoor use only To prevent damage never expose the device to any liquid or moisture Avoid direct sunlight heavy dirt and strong vibrations themann moving head MUSIC IS OUR PASSION 12 Safety instructions NOTICE Power supply Before connecting the device ensure that the input voltage AC outlet matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker Failure to do so could result in damage to the device and possibly injure the user Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire MH x200 Pro Spot th mann MUSIC IS OUR PASSION 13 Features 3 Features This Moving Head is specially suited for professional lighting e g at events on rock stages in theat
8. 60 69 Gobo 7 MH x200 Pro Spot th mann MUSIC IS OUR PASSION 47 Operation Channel th mann MUSIC IS OUR PASSION 48 Value 70 80 90 go 108 124 140 156 172 188 204 220 238 107 123 139 155 171 187 203 219 2237 255 Function Gobo 8 Gobo 9 Open Gobo 2 shake increasing speed Gobo 3 shake increasing speed Gobo 4 shake increasing speed Gobo 5 shake increasing speed Gobo 6 shake increasing speed Gobo 7 shake increasing speed Gobo 8 shake increasing speed Gobo 9 shake increasing speed Rotation clockwise increasing speed Rotation counter clockwise increasing speed moving head Channel 9 10 11 Value Focus 0 255 Aperture 0 63 64 127 128 191 192 255 Prism 0 7 8 15 16 127 128 239 240 255 Function Focussing Open close iris diaphragm manually Automatic zoom increasing speed Slow zooming in fast zooming out Fast zooming in slow zooming out White Static prism Clockwise rotating prism Counter clockwise rotating prism Static prism MH x200 Pro Spot Operation themann MUSIC IS OUR PASSION 49 Operation 7 7 Functions in 16 channel DMX mode Channel Value 1 0 255 0 255 0 255 09955 0 255 a Wu A w N Colour wheel 0 7 8 15 16 23 24 31 32 39 themann MUSIC IS OUR PASSION 50 Function Rotation pan 0 to maximum Pan range
9. 79 Reset Gobo 2 80 84 Reset focus 85 89 Reset prism 90 99 Reset channels 100 129 Free 130 192 Random programme sequence 193 255 Sound control themann moving head MUSIC IS OUR PASSION 58 Channel 16 Value Effects 0 9 10 19 240 249 250 255 Function Free Effect 1 Effect 24 Effect 25 MH x200 Pro Spot Operation th mann MUSIC IS OUR PASSION 59 Cleaning 8 Cleaning Optical lenses Fan grids th mann MUSIC IS OUR PASSION Clean the exterior of accessible optical lenses periodically to optimise light output The fre quency of cleaning depends on the operating environment wet smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device B Clean with a soft cloth using normal glass cleaning products m Always dry the parts carefully The fan grids of the device must be cleaned on a regular basis to remove dust and dirt Before cleaning switch off the device and disconnect AC powered devices from the mains Use a lint free damp cloth for cleaning Never use solvents or alcohol for cleaning moving head 60 Troubleshooting 9 Troubleshooting NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers In the following we list a few com
10. Always use proper ready made insulated mains cabling power cord with a pro tective contact plug Do not modify the mains cable or the plug Failure to do so could result in electric shock death or fire If in doubt seek advice from a regis tered electrician MH x200 Pro Spot th mann MUSIC IS OUR PASSION Safety instructions WARNING Eye damage caused by high light intensity Never look directly into the light source WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy Sensitive persons should avoid looking at strobe lights WARNING Risk of burns The surface of the device can become very hot during operation Do not touch the device with bare hands during operation and after switching off wait for at least 15 minutes th mann moving head MUSIC IS OUR PASSION 10 Safety instructions CAUTION Risk of injury due to movements of the device The head of the device can move quickly pan tilt and can produce very bright light This is also valid immediately after you turn on the device when the device operates in automatic mode or under remote control and when you turn off a DMX controller that is connected to the device Persons staying near the device could be injured or frightened Before you turn on the device and during the operation always ensure that nobody stays close to the device If work has to be performed in the area of move ment or in the
11. ON 27 Operation DMX address th mann MUSIC IS OUR PASSION Press MODE ESC repeatedly until the display shows DMX Address Press ENTER to open this menu item Now you can set the number of the first DMX channel to be used by the device DMX address Use UP and DOWN to select a value between 1 and 512 When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC Make sure that this number matches the configuration of your DMX controller The following table shows the highest possible DMX address for the various modes Mode Highest possible DMX address 11 channels 502 16 channels 497 moving head 28 Operation Operating mode Auto Show Press MODE ESC repeatedly until the display shows Run Press ENTER to open this menu item Now use UP and DOWN to select the operating mode Press ENTER to start operation in the selected operating mode Menu display Operating mode Fast Fast automatic show in Stand alone mode Slow Slow automatic show in Stand alone mode Sound Sound controlled show in Stand alone mode Slave Preprogrammed show in slave mode Pan inversion Press MODE ESC repeatedly until the display shows Pan Press ENTER to open this menu item Now use UP and DOWN to toggle between Reverse inverse rotational direction and
12. R to open this menu item Use the UP and DOWN buttons to adjust the desired home position When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC Activate the settings menu Press MODE ESC repeatedly until the display shows Tilt Init Press ENTER to open this menu item Use the UP and DOWN buttons to adjust the desired home position When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC Activate the settings menu Press MODE ESC repeatedly until the display shows Color Init Press ENTER to open this menu item Use the UP and DOWN buttons to adjust the desired home position When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC MH x200 Pro Spot themann MUSIC IS OUR PASSION 33 Operation Gobo wheel 1 alignment Gobo rotation Gobo wheel 2 alignment th mann MUSIC IS OUR PASSION Activate the settings menu Press MODE ESC repeatedly until the display shows Gobo 1 Init Press ENTER to open this menu item Use the UP and DOWN buttons to adjust the desired home position Whe
13. STARvL CLEE MH x200 Pro Spot moving head user manual MUSIC IS OUR PASSION Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany Telephone 49 0 9546 9223 0 E mail info thomann de Internet www thomann de 10 06 2013 Table of contents na Uu B WN Table of contents GOT AN OCS 5 Safety iNstructiOns eecsscssssssssecssecsssecssscesescessseecssecesuecesscesssecsssesssscessscesacesstecsusecssceeeseessueecsseessess 8 Gu AA 14 HIELCIIEYIT a AA AA AA Starting up sese Connections and operating elements Operation sss 7 1 Starting the device Fad M i kka NAA NANG PG ANN 7 3 7 4 T5 MENWOVENIEW a mna 7 6 Functions in 11 channel DMX MOde csssscssscsssscssseccscccssecessecsuscesseesnscessesessceesseceseecsnecesseesnecs 43 7 7 Functions in 16 channel DMX MOE c cscsssssscssessesssesssesssecsscsssssssessessnscsscssecsscsnssessesseesseesees 50 SV ATMA AGG E E har 60 MH x200 Pro Spot th mann MUSIC IS OUR PASSION Table of contents 9 TOUTE SIO OCG NANABIK ARA 61 10 Technical specifications XXX a m m m mm mmmmasanasasanasusmanas 63 11 Protecting the environmentu Amana maara 64 themann moving head MUSIC IS OUR PASSION 1 General notes Sym
14. bols and signal words General notes This user manual contains important information on safe operation of the device Read and follow all safety notes and all instructions Save this manual for future reference Make sure that it is available to all persons using this device If you sell the device include the manual for the next owner Our products are subject to a process of continuous development We therefore reserve the right to make changes without notice This section provides an overview of the symbols and signal words used in this user manual MH x200 Pro Spot th mann MUSIC IS OUR PASSION General notes Signal word DANGER WARNING CAUTION NOTICE themann moving head MUSIC IS OUR PASSION Meaning This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a possible dangerous situation that can result in minor injury if it is not avoided This combination of symbol and signal word indicates a possible dangerous situation that can result in material and environmental damage if it is not avoided General notes Warning signs Type of danger Warning high voltage Warning hot surface Warnin
15. e the settings menu Press MODE ESC repeatedly until the display shows Prism Init Use the UP and DOWN buttons to adjust the desired home position When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC Aperture alignment Activate the settings menu Press MODE ESC repeatedly until the display shows Iris Init Press ENTER to open this menu item Use the UP and DOWN buttons to adjust the desired home position When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC MH x200 Pro Spot th mann MUSIC IS OUR PASSION 35 Operation Brightness alignment th mann MUSIC IS OUR PASSION Activate the settings menu Press MODE ESC repeatedly until the display shows Lamp Init Press ENTER to open this menu item Use the UP and DOWN buttons to adjust the desired default brightness When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC moving head 36 Operation 7 4 Gobos Gobo wheel 1 rotating gobos MH x200 Pro Spot th mann MUSIC IS OUR PASSION 37 Operation static
16. fficient for the intended number of devices Note that the movement of the head may addition ally stress the load bearing structures th mann moving head MUSIC IS OUR PASSION 16 Installation CAUTION Risk of injury due to movements of the device The head of the device can move quickly pan tilt and can produce very bright light This is also valid immediately after you turn on the device when the device operates in automatic mode or under remote control and when you turn off a DMX controller that is connected to the device Persons staying near the device could be injured or frightened Before you turn on the device and during the operation always ensure that nobody stays close to the device If work has to be performed in the area of move ment or in the near vicinity of the device it must remain turned off NOTICE Risk of overheating Always ensure sufficient ventilation The ambient temperature must always be below 40 C 104 F MH x200 Pro Spot th mann MUSIC IS OUR PASSION 17 Installation th mann MUSIC IS OUR PASSION NOTICE Possible damage caused by movements of the device Always ensure that enough space is free around the device for the movements of the head pan tilt NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixe
17. g suspended load Warning danger zone gt PPP MH x200 Pro Spot th mann MUSIC IS OUR PASSION Safety instructions 2 Safety instructions Intended use This device is intended to be used as moving head spotlight Use the device only as described in this user manual Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage No liability will be assumed for damages resulting from improper use This device may be used only by persons with sufficient physical sensorial and intellectual abilities and having corresponding knowledge and experience Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety DANGER Danger for children Ensure that plastic bags packaging etc are disposed of properly and are not within reach of babies and young children Choking hazard Safety Ensure that children do not detach any small parts e g knobs or the like from the unit They could swallow the pieces and choke Never let children unattended use electrical devices th mann moving head MUSIC IS OUR PASSION Safety instructions DANGER Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present Never remove any covers There are no user serviceable parts inside DANGER Electric shock caused by short circuit
18. it 3 Color Init Set 128 4 Gobo 1 Init 5 Grota Init 4 Gobo 1 Init Set 128 5 Grota Init lt 6 Gobo 2 Init 5 Grota Init Set 128 MH x200 Pro Spot themann MUSIC IS OUR PASSION 41 Operation 9 Iris Init 10 LED Init 7 Focus Init lt 8 Prism Init 7 Focus Init Set 128 8 Prism Init lt 1 Iris Init 8 Prism Init Set 128 10 LED Init 1 Pan Init 10 LED Init Set 128 themann moving head MUSIC IS OUR PASSION 42 Operation 7 6 Functions in 11 channel DMX mode Channel Value Function 1 0 255 Rotation pan 0 to maximum Pan range value 180 270 or 540 2 0 255 Inclination tilt 0 to maximum Tilt range value 90 180 or 270 3 Colour wheel 0 7 White 8 15 Blue 16 23 Yellow PA ssl Pink 32539 Green 40 47 Red 48 55 Light blue 56 63 Orange red MH x200 Pro Spot th mann MUSIC IS OUR PASSION 43 Operation Channel th mann MUSIC IS OUR PASSION Value 64 66 67 78 79 92 93 107 108 120 121 136 97550152 153 170 171 212 213 255 Shutter 0 7 8 22 Function White Stepwise transition from white to blue Stepwise transition from blue to yellow Stepwise transition from yellow to pink Stepwise transition from pink to green Stepwise transition from green to red Stepwise transition from red to light blue Stepwise transition from light blue to orange red Rotation clockwise inc
19. mon problems that may occur during operation We give you some suggestions for easy troubleshooting MH x200 Pro Spot th mann MUSIC IS OUR PASSION 61 Troubleshooting Symptom Remedy The unit does not work no light Check the mains power connection and the main fuse the fan does not run No response to the DMX con 1 The DMX indicator should light up If it doesn t check troller DMX connectors and cables for proper connection 2 If the DMX indicator lights up but with no response check the address settings and DMX polarity 3 Try using another DMX controller 4 Check whether the DMX cables lie near or adjacent to high voltage cables which could cause damage or inter ference with a DMX interface circuit If the procedures recommended above do not succeed please contact our Service Center You can find the contact information at www thomann de themann moving head MUSIC IS OUR PASSION 62 Technical specifications 10 Technical specifications Number of DMX channels 16 11 LED 120W Operating supply voltage AC 230 V 50 Hz Power consumption 200 W Dimensions W x D x H when pointing upwards 495 mm x 422 mm x 482 mm Weight 20 5 kg MH x200 Pro Spot th mann MUSIC IS OUR PASSION 63 Protecting the environment 11 Protecting the environment Disposal of the packaging mate rial Disposal of your old device th mann MUSIC IS OUR PASSION For the transport and protective
20. n the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC Activate the settings menu Press MODE ESC repeatedly until the display shows Grota Init Press ENTER to open this menu item Use the UP and DOWN buttons to adjust the desired rotation position When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC Activate the settings menu Press MODE ESC repeatedly until the display shows Gobo 2 Init Press ENTER to open this menu item Use the UP and DOWN buttons to adjust the desired home position When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC moving head 34 Operation Focus alignment Activate the settings menu Press MODE ESC repeatedly until the display shows Focus Init Press ENTER to open this menu item Use the UP and DOWN buttons to adjust the desired home position When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To switch the menu item without changes press MODE ESC Prism alignment Activat
21. packaging environmentally friendly materials have been chosen that can be supplied to normal recycling Ensure that plastic bags packaging etc are properly disposed of Do not just dispose of these materials with your normal household waste but make sure that they are collected for recycling Please follow the notes and markings on the packaging This device is subject to the European directive 2002 96 EC Do not dispose of the device with your normal household waste Dispose of this device through an approved waste disposal firm or through your local waste facility When discarding the device comply with the rules and regulations that apply in your country If in doubt consult your local waste disposal facility moving head 64 Notes MH x200 Pro Spot th mann MUSIC IS OUR PASSION 65 Notes themann moving head MUSIC IS OUR PASSION 66 Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany www thomann de
22. reasing speed Rotation counter clockwise increasing speed Closed Open moving head Channel Value 23 85 86 100 101 165 166 180 181 245 246 255 Dimmer 0 255 Operation Function Strobe light increasing speed Open Triple strobe increasing speed Open Irregular strobe light increasing speed Open 0 100 96 Gobo wheel 1 movable 0 9 10 19 20 29 30 39 Open Gobo 2 Gobo 3 Gobo 4 MH x200 Pro Spot th mann MUSIC IS OUR PASSION 45 Operation Channel th mann MUSIC IS OUR PASSION 46 Value 40 50 60 70 80 100 120 140 160 180 200 220 238 49 59 69 79 399 119 139 159 179 199 219 AB 255 Function Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 2 shake increasing speed Gobo 3 shake increasing speed Gobo 4 shake increasing speed Gobo 5 shake increasing speed Gobo 6 shake increasing speed Gobo 7 shake increasing speed Gobo 8 shake increasing speed Rotation clockwise increasing speed Rotation counter clockwise increasing speed moving head Channel 7 Operation Value Function Gobo rotation 0 10 No rotation 11 127 Fixed position from 0 to 360 128 191 Rotation clockwise increasing speed 192 255 Rotation counter clockwise increasing speed Gobo wheel 2 static 0 9 Open 10 19 Gobo 2 20 29 Gobo 3 39 39 Gobo 4 40 49 Gobo 5 50 59 Gobo 6
23. res musicals or discos Special features of the device B Two moving axes with 8 or 16 bit resolution Inclination 270 Rotation 540 Automatic position correction Control via DMX 11 or 16 channels as well as via buttons and display on the unit Preprogrammed automatic show programmes Sound control Master slave mode Colour wheel with white 7 full colours 7 split colours and rainbow effect Gobo wheel with 8 static gobos gobo shake function and rainbow effect Gobo wheel with 7 rotatable gobos and rainbow effect Effects wheel with triple prism Electronical dimmer th mann moving head MUSIC IS OUR PASSION 14 Features B Electronical aperture m Mechanical focus Shutter frequency 0 20 Hz MH x200 Pro Spot th mann MUSIC IS OUR PASSION 15 Installation 4 Installation Unpack and carefully check that there is no transportation damage before using the unit Keep the equipment packaging To fully protect the device against vibration dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage respectively WARNING Risk of injury by falling off Make sure that the installation complies with the standards and rules that apply in your country Always secure the device with a secondary safety attachment such as a safety cable or a safety chain The carrying capacity of the truss or other mounting must be su
24. rs or ampli fiers moving head 18 Installation DMX connections The unit offers a 3 pin XLR socket for DMX output and a 3 pin XLR plug for DMX input Please refer to the drawing and table below for the pin assignment of a suitable XLR plug Pin Configuration 1 Ground shielding 2 Signal inverted DMX cold signal 3 Signal DMX hot signal MH x200 Pro Spot themann MUSIC IS OUR PASSION 19 Starting up 5 Starting up Establish all connections as long as the unit is switched off Use the shortest possible high quality cables for all connections themann moving head MUSIC IS OUR PASSION 20 Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device Connect the output of the first DMX device to the input of the second one and so on to form a daisy chain Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor 110 O 74 W 2 n MH x200 Pro Spot th mann MUSIC IS OUR PASSION 21 Starting up DMX indicator Connections in master slave mode th mann MUSIC IS OUR PASSION If the device and the DMX controller are in operation the DMX indicator in the display red LED shows an incoming DMX signal at the input When you configure a group of devices in master slave mode the first unit will control the other units for an automatic sound activa
25. ted synchronized show This function is ideal when you want to start a show immediately Connect the DMX output of the master device to the DMX input of the first slave device Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on moving head 22 Connections and operating elements Connections and operating elements MH x200 Pro Spot th mann MUSIC IS OUR PASSION 23 Connections and operating elements 1 Light aperture with projection lens mechanical focus 2 Display 3 MODE ESC button Activates the main menu and the settings menu and switches between the menu items Closes an open menu without saving the changes 4 UP button Increases the displayed value by one 5 DOWN button Decreases the displayed value by one 6 ENTER button Selects an option of the respective operating mode confirms the set value 7 DMX indicator th mann moving head MUSIC IS OUR PASSION 24 INPUT DMX input OUTPUT DMX output POWER IEC chassis connector with fuse holder MH x200 Pro Spot Connections and operating elements th mann MUSIC IS OUR PASSION 25 Operation 7 Operation 7 1 Starting the device CAUTION Risk of injury due to movements of the device The head of the device can move quickly pan tilt and can produce very bright light This is also valid immediately after you turn on the device when the device operates in au
26. tomatic mode or under remote control and when you turn off a DMX controller that is connected to the device Persons staying near the device could be injured or frightened Before you turn on the device and during the operation always ensure that nobody stays close to the device If work has to be performed in the area of move ment or in the near vicinity of the device it must remain turned off Connect the device to the power grid to start operation After a few seconds the fans start to work and the head moves to the pan rotation and tilt inclination home position After some more seconds the display shows DMX Address 001 Now the device is operational th mann moving head MUSIC IS OUR PASSION 26 7 2 Main menu Operation Press MODE ESC to activate the main menu Press UP and DOWN to select a main menu item and ENTER to open the selected menu item Use UP and DOWN to change the respectively indicated value When the display shows the desired value press ENTER To return to the main menu without any changes press MODE ESC If you don t press any button for about 30 seconds the display turns dark Then press MODE ESC briefly to turn it on again All previous settings are saved even if you turn the device off and disconnect it from the mains To restart with default values use the Load set function Loading default values on page 32 MH x200 Pro Spot th mann MUSIC IS OUR PASSI
27. value 180 270 or 540 Inclination tilt 0 to maximum Tilt range value 90 180 or 270 Rotation pan 16 bit operation Inclination tilt 16 bit operation Speed rotation inclination fast to slow White Blue Yellow Pink Green moving head Channel Value 40 48 56 64 ZONE soc 108 121 137 153 Wee 213 47 55 63 66 67 78 92 107 120 136 152 170 212 255 Operation Function Red Light blue Orange red White Stepwise transition from white to blue Stepwise transition from blue to yellow Stepwise transition from yellow to pink Stepwise transition from pink to green Stepwise transition from green to red Stepwise transition from red to light blue Stepwise transition from light blue to orange red Rotation clockwise increasing speed Rotation counter clockwise increasing speed MH x200 Pro Spot th mann MUSIC IS OUR PASSION 51 Operation Channel 7 th mann MUSIC IS OUR PASSION 52 Value Shutter 0 7 8 22 23 8 86 1 101 166 181 246 Dimm 0 25 5 00 165 180 245 255 er 5 Function Closed Open Strobe light increasing speed Open Triple strobe increasing speed Open Irregular strobe light increasing speed Open 0 100 96 Gobo wheel 1 movable 0 Open moving head Channel Value 10 19 20 29 30 39 40 49 50 59 60 69 70
Download Pdf Manuals
Related Search