Operating instructions
Contents
1. CI ASI TS amp A V C LINE When this menu item is requested at first a security query whether it really set all parameters to the factory default settings Affirming the query all settings stored in the EEPROM will be deleted and replaced by the default settings The module will go back to these default values Once the setting process is over there will be an automatic return to the main menu Name of device item number address in headend displays whether SYNChronization or noSYNChronization displays the receiv standard of the signal displays the actual input frequency displays the actual symbol rate displays the FEC displays the signal modulation displays the spectral inversion in in dB bit error rate DVB S packet error rate DVB S2 according to the signalling DVB S2 Synchronization status for the TS audio and video decoder Complementary data displays detailed information about current VPS data displays detailed information about current WSS data temperature of terminals board display of the device number display of the device index hardware SDB 908 SAT TV Demodulator ce Part N 9726 02 9726 02 DVB S S2 Cl ASI TS amp A V LINE 10 12 Software overview menu 11 SAT TV DEMODULATOR SDB 905 9726 02 i 00 Address OO 00 Name of device item number address in headend Version sion Version 9726 02 8101 Displays the software versions for the cont2. 163 AC3 po ee Test OK 165 VBI on Ce peat Test OK 169 VBI ramen Test OK _ SDB 908 SAT TV Demodulator ce Part N 9726 02 9726 02 DVB S S2 Cl ASI TS amp A V LINE 10 9 Extended settings menu 8 SAT TV DEMODULATOR SDB 908 Name of device item number address in headend 9726 01 100 Address 00 15 Video settings of the video parameters Video output selection on auto off auto colour palette bar Color bar selection on off Color system selection PAL SECAM NTSC Audio A setting of the following fields is only necessary when two audiq Sound channel selection Audio PID 2 is selected The selection PID s are selected for transmission in the main menu For bot must only be made if dual tone is transmitted in the respective audio of these audio data streams a dual tone is generated If even a TS The audio channel to be transmitted has to be selected dual tone is transmitted in one or two data streams so you ca choose with the two setting fields which of the two tones pe audio stream to be used for the generation of the resulting dua tone Dolby Mode Only available if the software option Dolby mode is enabled Auto automatic setting Stereo Pro Logic L R Pro Logic Mode 2 Lai Ry Stereo iat VPS settings MPEG hi CNI code adjustment range 0x000 0xFFF hex A056 PDC Source audio mode selection MPEG AO56 MPEG sae Source PIL selection A056 PDC A
3. Feed DVB S S2 iA os oe SDB 908 SDB 908 SDB 908 I ASI OUT 16 Technical data SAT IF input Frequency range Frequency step AFC range AGC level range Connector Impedance 950 1 MHz 3 MHz SR lt 10 MSps 5 MHz SR 10 MSps 2 82 dBuV F socket 750 2150 MHz DVB S demodulator QPSK Symbol rate Code rate Roll off Signal processing 1 45 MSps 1 2 2 3 3 4 5 6 7 8 35 EN 300 421 DVB S 1 DVB S2 demodulator QPSK 8PSK Symbol rate QPSK 2 47 MSps 8PSK 2 31 5 MSps Code rate QPSK 1 4 1 3 2 5 1 2 3 5 2 3 3 4 4 5 5 6 8 9 9 10 8PSK 3 5 2 8 3 4 5 6 8 9 9 10 Roll off 20 25 35 Signal processing ASI output Data rate Polarity Mode TS data rate TS mode Output voltage Connector Impedance Signal processing Decryption interface Common Interface Operating voltage Multi Service decryption MPEG decoder Video EN 302 307 DVB S2 2 270 Mbps normal inverted burst continuous according symbol rate and coding 188 Bytes 800 MV p 10 BNC socket 75 Q EN 50083 9 3 PCMCIA Slot according EN 50221 4 5V 21 services max H 264 AVC Level 4 1 HP MPEG 2 MP HL SDB 908 SDB 908 SDB 908 A V output Audio 1 Audio 2 Video output Output voltage Connector Impedance Audio output Rated level at digital 6 dBFS max output level Output impedance Output Connector Operating
4. For direct connection between a PC and HCB x00 use crossover cable RJ 45 For connection over a hub use a normal straight throught patch cable Start up HTML browser and put in IP address as target address If connected correctly the web interface will be opened on the pc and a blue LED LINK at the HCB x00 will be lit up All adjustments of the modules are specified on the web interface 7 3 Setting with SNMP Prerequisite for the SNMP functionality is the use of HCB x00 with enabled SNMP software option CKB 100 Supported is SNMP version 1 0 7 Automatic creation of the MIB based on the current headend configuration by the HCB x00 For setting and reading out the parameters and is to receive traps from an SNMP management software required Further notes on the SNMP functionality of BLANKOM modules are listed in the SNMP manual download www blankom de The manual instructions of the Headend Controller HCB x00 and the Bus Extender BEB x00 have to be considered 8 Front panel LED s Designation Colour Status sid Meaning of display STANDBY red module is in standby aa module faulty hardware error READY green permanentlyon sd on module working properly flashing error warnings depending on signal tuner not synchronized e g there is no input signal service settings are not valid ADDR yellow illuminated flashing remote control connection data being exchanged 9 Audio socket
5. Tv 13012 germpegi missing Set AITRADTIO OES free IV 13013 ger mpegl russing Cse ORF ZE free TV 13014 ger mpeg missing Hallo TV German free free TY 13015 ger mpegs fissing Hallo TV Espa a free free TV 13016 spa mpeg missing Hallo TV Polska tree e Tv 13017 pol mpeg2 missing Cse Folz TV e TV 13018 ger mpegs OoOO Mm fee Tv 13019 germpeg2 missing Set ee This menu contains a list of all H 264 AVC amp MPEG 2 services available in the data stream Audio and DVB subtilte language selection can take place here if there are any available A service is adopted or changed by clicking the relevant Set button SDB 908 SAT TV Demodulator ce Part N 9726 02 9726 02 DVB S S2 Cl ASI TS amp A V LINE 10 4 CA menu menu 3 SALTV DEMODULATOR SDB 908 l 9726 02 00 Address 00 00 Name of device item number address in headend On these pages all menus implemented in the CA module t 3 16 c Mascom GmbH are offered The available menus are selected individually or are invoked one by one to do necessary settings or to get all Module Hauptmenu information about the CA module Lf Information ai Startkarte 4f Nachrichten 4f Jugendschutz Sf Enstelungen 6f Aurich Bitte w hlen Sie mit OE Select Menu 1 6 C C 0 J Man mens JL Next gt gt i ett C00 10 5 Multi decryption menu
6. Pin assignment Audio mode signaling 5 3 7 Mono Pins 6 8 Connection open Pins 7 8 Connection closed 1 stereo left dual A mono 2 screening earth 3 stereo right dual B Stereo Pins 6 8 Connection closed 2 8 4 stereo left dual A mono Pins 7 8 Connection open 5 stereo right dual B 6 control line contact 1 Dual Pins 6 8 Connection closed 7 control line contact 2 Pins 7 8 Connection closed 8 control line return path earth or Pins 6 8 Connection open Pins 7 8 Connection open SAT TV Demodulator DVB S S2 CI ASI TS amp A V C LINE SDB 908 Part N 9726 02 9726 02 10 Programming by web server 10 1 Main menu SAT TV DEMODULATOR SDB 908 9726 02 00 Address 00 00 Description ORF2 i Input sar IF 2092 Me Symbol rate 22000 k kSps Standard auto v Status SYNC BISS settings BIss key BISS E injected ID AST output Polarity normal y rs source auto K ccna CREA A V program settings Program listing Load Load Service ID ID Service ID atti i s s r 1 3002 faez Service type TV Audio PID 1 language number i Language code 1 ger mpeg Audio PID 2 language number 1 Language code 2 aes Audio description Audio settings Audio gain 0 v ap Common Interface Status AlphaCrypt ca menu Mfultidecryption Menu Count of service 2 Operating status SNM
7. and other digital video broadcasting decoder applications German version EN 50221 1997 Corrigendum 2000 5 DIN 45326 EN 60130 9 Connectors for frequencies below 3 MHz Part 9 Circular connectors for radio and associated sound equipment 2000 05 6 EN 60728 11 Cable networks for television signals sound signals and interactive services Part 11 Safety IEC 60728 11 2005 German version EN 60728 11 2005 7 RFC 1157 Request for Comments RFC RFC Database URL http www rfc editor org rfc html 19 Document history Version Modification Author 14 10 2013 basic document HauBer 15 07 2014 software options added chapter 3 device variant 9726 01 and Dolby Mode in Appelfelder chapter 10 9 added revision tech data Options and other TV standards available upon request Subjects to changes due to technical progress BLANKOM Antennentechnik GmbH Hermann Petersilge StraBe 1 07422 Bad Blankenburg Germany Phone 49 0 3 67 41 60 0 Fax 49 0 3 67 41 60 100 16 C Declaration of Conformity Manufacturer BLANKOM Antennentechnik GmbH Hermann Petersilge Stra e 1 07422 Bad Blankenburg Germany Product Name SAT TV Transmodulator Type Name SDB 908 Type N 9726 01 9726 02 BLANKOM Antennentechnik GmbH confirms that the mentioned product meets the guideline s of the Council for the approximation of legislation of the member states Electromagnetic compatibility 2004 108
8. menu 4 SAT TV DEMODULATOR SDB 908 9726 02 00 Address 00 00 Progamname nare Decoding settings settings Status 4 2 letel tored dec PID s 5 erice completely store dec FID s total 10 Clear entries ee Serve comity stored Selection Testing selection Transmit Back It is important to note that the possibility of multiple decryption depends on the CA module used The maximum number of PIDs to be decrypted is limited and maximum limit per CA module is different When calling this menu the selection of the services of the adjusted transponder which were selected for decryption and whose decryption was successfully appears Indicated are the program name with the number of the decoded PID s the decryption settings and the status of the program Stored means that the service was successfull decrypted and saved in the CA service list Using the check box Clear entries and the Transmit Back button the entire selection will be deleted and no services are decrypted afterwards By using the Selection button and the appropriate selection of the services in the multi decryption selection menu menu 5 the list of the services to decrypt can be changed Using the Testing selection button calls the test menu menu 6 in which the decryption state of all programs in the CA service list will be tested again and possible occurring errors will be listed SDB 908 SAT TV Demodulator ce Pa
9. parameters Voltage current w o CAM Residual ripple of supply voltage Environmental conditions Temperature range Temperature range for data keeping Relative humidity Method of mounting Location of mounting Miscellaneous Dimensions w x h x d without 19 adapter with 19 adapter Weight Delivery content 1x Bus connector C LINE SDB 908 SDB 908 ASI output MPEG 1 Layer 1 amp 2 AAC AC3 MPEG 1 Layer 1 amp 2 1 Vio BNC socket 750 6 dBu 12 dBu lt 300 symmetrical free of ground socket according DIN 45326 5 IEC 130 9 20 12 V 0 2 V 600 mA lt 10 MV p 10 55 C 5 45 C lt 80 non condensing vertical splash proof and drip proof 50 x 276 x 148 mm 50 x 301 x 148 mm 1 300 g 1x Audio connecting cable ASK 525 1x Video connecting cable VVK 526 only supported in the device variant 9726 01 15 SDB 908 SAT TV Demodulator ce Part N 9726 02 9726 02 DVB S S2 Cl ASI TS amp A V LINE 17 Glossary AAC AC3 AP ASI AV BISS CA CAM Cl CCIR DVB FPGA HTML HTTP ID IIC IP Advanced Audio Coding LED Light Emitting Diode Adaptive Transform Coder 3 MC Microcontroller Anschlussplatte Terminals board MIB Management Information Base Asynchronous Serial Interface MPEG Moving Picture Experts Group Audio Video NTSC National Television Systems Committee Basic Interoperable Scrambling System PAL Phase Alternating Line Condit
10. 056 PDC TimerControlCode CA settings SDTPMT processing SDT PMT processing selection on off Mode CA PMT update CA PMT Entry Mode CA PMT selection CA PMT List CA PMT Entry oe F Eme oo of update isn t Supporiga by all CAM s Use of date amp time selection on off Smart card activation mode deactivated Smart card act mode selection activated deactivated CA check time CA check time input in min Subtitling Only available if the software option Subtitling is enabled Mode selection Off Teletext DVB Settings D VB Subtitling DVEB Subtitling Settings DVB Subtitling Only available if the software option Subtitling is enabled DVB language index language index DVB languages index adjustment range 0 16 IDVE language code DVB language code displays the code of the language selectec ne Use extended ID s selection yes no Use extended ID s Settings Teletext Subtitling Settings Teletext Subtitling Only available if the software option Subtitling is enabled Teletext page Teletext page adjustment range 0 899 Language group selection west east russian arabic farsi Language group west 1 The settings listed under CA settings are selected individually depending on the particular CA module since the individual modules may require appropriate resources and timelines for their initialization Furthermore in the second setting point the modes o
11. 55 activation ASI output 4 General The SAT TV Demodulator SDB 908 is a module of the headend system B LINE which is conceived as a complete system for middle sized networks The SDB 908 demodulates DVB S S2 signals 8PSK QPSK into analogue audio video signals A Common Interface slot enables the use of CA modules for the reception of scrambled satellite signals programs Additionally the processed transport stream with the descrambled services is available on the ASI output All the components are programmed via a central control unit and will function independently thereafter The status of the modules is displayed via LED s chapter 7 Status LED s SDB 908 SAT TV Demodulator ce Part N 9726 02 9726 02 DVB S S2 Cl ASI TS amp A V LINE 5 Front view SAT IF input SAT TV DEMODULATOR DVB S S2 gt CI gt A V amp ASI Type SDB 908 Part N 9726 02 SAT IF IN 950 2150 MHz INPUT LEVEL 42 82 dBuVv TV RF IF OUT 45 862 MHz IF OUTPUT LEVEL max 116 dBuV TV STANDARD B G D K Operating voltage control bus Sess LED STANDBY red s n READY green Cl slot aaa LED ADDR yellow e Address selector ASI OUT VIDEO OUT ASI TS output e Video output managed by a O Audio output SNMP 6 Functional descri
12. BLANKOM Professional Headend Solutions Operating instructions SAT TV Demodulator DVB S S2 Cl gt ASI TS amp A V Contents 1 Safety and Operating instructions ccccccceeeececeeeeeeeeeeeeeceeeeeeseaeeeessaeeeessaees 2 I OVICS VANS sccis E a aE E E aaa E CRC e E E E E deretasaatics g B A FONG VICW eaa a E E EE E A A eens 5 Functional description sessssesseseserssrersresrrnsresrnnsrrnsnrerrrsrronnenrreerersrernrrsrene ERSE E e AEE A EE E E E T T ere tee reer 6 1 Setting with the Headend Controller ccccccccsseeceeeeseeceseeeeeeesaeeeessaees 6 2 Setting With the PC VON roaches tcecoce sees catenat cece pace sceateeeaeeeneees 6 3 Setting with SNMP cccccsssecccceeeecceeeeeeceeeseeeceeseeesseeeeeseeeeesseeseessaaes Fe AUG LED See E 8 Audio socket s ssesiexansscsatnassacestingniagcuasce sed lensstedsnciseessacxtatasedeateb seecauatdauseussetuniasunn 9 Programming by web server siccwatesatnesaestencnenoesenesacsecrtasbelanisdivenenaeieiemennedis 9 1 Main Menu ss ciccetcles sccetet tenance tise ukien tandattabninhecdacecescnnouetacusahaentenaneeametenaeteuitaideess 9 2 SOM Wale OD OIG specs ses scces cannes tains ties snueenen aE TO 9 3 Loading the Program list cccecccseccsseecsseeseeceeeceeeeeseeeaseesaeesaeensenenes 4 p 7 0 r E E ee A 9 5 Multi decryption MONU cccccccseceeseeeeeeeeeeeeeseeeeseeeeseeeeseeeseeeeneeeeseeeeseeenees 9 6 Multi decryption selection
13. EC The following standards are met DIN EN 50083 2 2007 04 EN 50083 2 2006 06 Low voltage guideline 2006 95 EC The following standards are met DIN EN 60950 1 2006 04 EN 60950 1 2006 11 Information technology equipment Safety Restriction of hazardous substances 2011 65 EC The following standards are met DIN EN 50581 2013 02 EN 50581 2012 Bad Blankenburg Germany 2013 10 14 Dr Piero Kirchner Managing Director
14. FI First all saved services of the CA service list are tested for the current decryption status SAT TV DEMODULATOR SDB 908 9726 02 00 Address 00 00 Program name Decoding settings Status ORE one letel nae dec PID s 5 CIVICE Corp ETE y ORFI n n OK dec PID s 5 CIVICE Corp ETE Y dec FID s total 10 Clear entries Testing selection Transmit Back At the end of the test the multi decryption menu menu 4 is displayed The Info button shows the test result of the respective service and the relevant information page of the test menu 7 is displayed By clicking the Transmit Back button all settings are transmitted The Selection button routes back to menu 5 where you can change input values e g if too much PID s were selected 10 8 Multi decryption test information menu 7 SAT TV DEMODULATOR SDB 908 9726 02 00 Address 00 00 Service Information On this page information about the test result of the selected ServiceID CA information Test result service are displayed 13001 r a Test OK ae First the final result of the test with service ID and CA information is listed than for each requested PID the type the CA information information about elementary streams and the test result PID Type CA information Test result coded Name of device item number address in headend 160 Video with CAM support Test OK 161 Audio ae nar cd Test OK
15. P trap message SYNC control ornak i Factory settings Load ad Load JI Software options Extended settings Ltrs tears Lee Back gt Name of device item number address in headend Description Name of program max 30 characters Input SAT IF adjustment range 950 2150 MHz Symbol rate adjustment range 1000 45000 kSps Standard selection auto DVB S DVB S2 Status display whether SYNChronization or noSYNChronization with input BISS settings will only be available if BISS decryption option is enabled BISS key input of the 12 digit code in BISS mode 1 or the 16 digit code in BISS mode E input of the 14 digit code in BISS mode E no input in BISS mode 1 BISS E injected ID ASI output will only be available if ASI output option is enabled Polarity selection normal inverse TS source selection auto original A V program settings Program listing see menu 2 Service ID adjustment range 0 65535 Service type displays the type of selected service TV Radio adjustment range 0 47 displays the code of the selected lang 1 adjustment range 0 47 displays the code of the selected lang 2 selection on off Audio PID 1 lang n Language code 1 Audio PID 2 lang n Language code 2 Audio description Audio settings Audio gain adjustment range 6 20 dB Common Interface Status status message of the CA module CA menu see menu 3 Mult
16. Timer Control Code CA settings on off CA PMT Entry CA PMT List on off activated deactivated input in min update Subtitle settings on off 0 15 yes no 0 899 west east russian arabic farsi index ID s Channel name SDB 908 end 13 only available if ASI output option is enabled only available if Subtitle option is enabled C LINE SDB 908 SAT TV Demodulator Part N 9726 02 9726 02 DVB S S2 CI ASI TS amp A V 12 Trap messages nem Message eanege ope panation MPEG Decoder not sync WARNING Decoding of service fail WARNING 8 Decoding of service ok INFORMATION Descrambling of service ok 13 Block diagram Video CVBS H 264 AVC amp MPEG2 decoder Video Audio Mae 7 Audio SAT IF Fone descrambler processing 950 2150 MHz J TS DVB table ASI Power supply selector processing amp pese feos j O control CAM 14 Headend bus structure HCB x00 eee Headend f Controller tHE Module ADDR 01 Module Module ADDR 15 ADDR 15 Module signal processing unit Module ADDR 15 The number of the possible module connections 00 15 to a BEB x00 depends on the total power consumption of this line 14 SDB 908 Part N 9726 02 9726 02 SAT TV Demodulator 15 Application example HCB 200 BEB al el Fs eens Pere Le ae DVB S S2 Cl ASI TS amp A V
17. ce Part N 9726 02 9726 02 DVB S S2 Cl ASI TS amp A V LINE 1 Safety and operating instructions When installing starting up and adjusting the modules it is necessary to consider the system specific references in the manual instruction The modules may only be installed and started up by authorized technical personnel When installing the modules into the receiving points the adherence of the EMC regulations is to be secured The installing and wiring have to be done without voltage All active modules may only be operated with the Headend Controller HCB x00 or Bus Extender BEB x00 The main voltage and the operating voltage of the modules working by DC have to be in complience to the operating parameters described in the technical data With all work the defaults of the DIN EN 50083 have to be considered Especially the safetyrelevant execution of the DIN EN 60728 11 6 is necessary WEEE Reg Nr DE 50389067 2 Device variants SDB 908 9726 01 DVB S S2 Cl ASI TS amp A V incl AC3 Dolby SDB 908 9726 02 DVB S S2 Cl ASI TS amp A V Minimum software requirements for HCB x00 9650 03 version 2 34 9650 04 05 version 3 18 9652 01 version 3 23 9653 01 version 3 27 9653 02 version 3 28 Version updates http www blankom de en download software headend update 3 Software options CKB 102 9650 52 activation subtitles CKB 104 9650 54 activation BISS function CKB 105 9650
18. f the CA PMT updates are set You ca choose between CA PMT List and CA PMT Entry but the latter is not supported by all CAM s Some CA modules require to initialize the resource date amp time For all other modules this setting should remain disabled 10 SAT TV Demodulator SDB 908 Part N 9726 02 9726 02 10 10 Factory settings menu 9 x Are you sure to load Factory settings abbrechen_ Windows Internet Explorer a ad pops up Default values are set Please wait 10 11 Status of the device menu 10 SAT TV DEMODULATOR SDB 908 9726 02 00 Address 00 00 Tuner Status Tuner Status SYNC Standard HNR s Standard ooo O Me Input frequency 2031 636 MHz Symbol rate 21991 420 a lode rate Code rate Modulation Spectrum Modulation Tuner AGC Spectrum IQ normal C N BER PER Tuner At 61 b4 lent P16 4B BER PER Oe le IDVB 2 parameters IMPEG decoder TS S NC Audio Decoder SYNC Video Decoder SYNC Complementary data PIL 11 10 10 15 Running Audio dual ch CHI 020 ACeZ secondary 4 3 a Current Wes data sec A056 WSS Information ooo e Temperature Temperature 33 C edie number 0000000 Device index o gg Input frequency symbol rate DVB S2 parameters information MPEG decoder Status Status Current VPS data Curent VPS data Current WSS data Information Device number Device index 11 DVB S S2
19. he processed data stream on the ASI TS connector The multi service decryption is enabled therby The design of the Common interface of this module is done according to DVB standards Because of the dependencies in interaction of the DVB signals CA modules and smart cards we can not assure a general functional capability for all application possibilities Please contact our servic department for further assistance SDB 908 SAT TV Demodulator ce Part N 9726 02 9726 02 DVB S S2 Cl ASI TS amp A V LINE 7 Settings 7 1 Setting with Headend Controller Adjustment of the addresses at the Bus Extender BEB x00 and at the modules Activation of the programming mode on each module by selecting the line BEB x00 and the module position 1 15 at the Headend Controller HCB x00 yellow LED illuminates until the beginning of the parameter adjustment Adjustment of the SDB 908 parameters see chapter 10 green LED is switched on After the programming the SDB 908 will be automatically switched into the operating mode yellow LED flashes shortly green LED is switched on 7 2 Setting with PC laptop Prerequisite for the remote programming is an online connection according the IP standard and an ethernet connection at the PC laptop Adjustment of the line position addresses at the Bus Extender BEB x00 as well as at the modules At the Headend Controller HCB x00 input IP address default 192 168 2 80
20. idecryption Menu see menu 4 selection on off reset on off if SNMP option in HCB x00 is enabled otherwise locked is displayed synchronization test at input selection fast normally slowly see menu 10 Operating status SNMP trap mess SYNC control Factory settings Routing to the appropriate adjustment menu Software options see menu 1 Extended settings see menu 8 Status see menu 10 Software overview see menu 11 1 In the SDB 908 it is possible to select 1 or 2 audio PID s for transmitting If you select only one language then this is transmitted in the present audio mode mono stereo dual If you choose however two audio PID s a dual tone is generated from both of them as the dual tone 1 the language of the audio PID 1 as the dual tone 2 the language of the audio PID 2 see also menu 8 The audio PID 2 is disabled by a non numerical character 2 If you activate the function of audio description a dual tone is automatically generated if a program in the appropriate format into the selected service is transmitted which is transmitted in dual tone 1 the original and the dual tone 2 the descriptive explanation of the image There is however necessary that there is set as the audio PID 1 the appropriately labeled audio stream of the service For further details see the HCB manual SDB 908 SAT TV Demodulator ce Part N 9726 02 9726 02 DVB S S2 Cl ASI TS amp A V LINE 10 2 Software opt
21. ional Access PCR Programme Clock Reference Conditional Access Module PDC Programme Delivery Control synonym of VPS Common Interface PID Packet Identifier Comit Consultatif International des PMT Programme Map Table Radiocommunications PLL Phase locked loop Digital Video Broadcasting SECAM S quentiel couleur m moire C Cable S Satellite S2 Satellite 2 T Terrestrial SNMP Simple Network Management Protocol Field Programmable Gate Array SPI Serial Peripheral Interface Hypertext Markup Language SPTS Single Programme Transport Stream Hypertext Transfer Protocol TS Transport Stream Identifier TV Television Inter Integrated Circuit VPS Video Programming System l C Bus data bus within device WSS Wide Screen Signalling Internet Protocol color encoding systems of analogue television 18 Bibliography 1 EN 300 421 Digital Video Broadcasting DVB Framing structure channel coding and modulation for 11 12 GHz satellite services 2 EN 302 307 Digital Video Broadcasting DVB Second generation framing structure channel coding and modulation systems for Broadcasting Interactive Services News Gathering and other broadband satellite applications 3 EN 50083 9 Cabled distribution systems for television sound and interactive multimedia signals part 9 Interfaces for CATV SMATV headends and similar professional equipment for DVB MPEG 2 transport streams 4 EN 50221 Common interface specification for conditional access
22. ions menu 1 SAT TV DEMODULATOR SDB 908 Name of device item number address in headend 9726 02 00 Address 00 00 Available software options P a eta Dialogue for entering a code to activate the subtitling CKB a S 102 BISS decryption CKB 104 and ASI output CKB 105 Subtitling activate software options When the page is called the current state of BISS descrambler activate activation is displayed AST output activate Enter license key License index 0 Device number OO00000 Back Transmit 10 3 Loading the program list menu 2 SAT TV DEMODULATOR SDB 9058 9726 02 00 Address 00 00 a A Program listing peal Progamaame stame SE sewoe odol Audon SHEE Iseton rogram name tatus E service ID ear aa e Selection GEFI coded rv 13001 ger mpeg fussing ORF coded TV 13002 ger mpeg missing ORFS W coded TV 13003 ger mpeg missing ORF2 NM coded TV 13004 ger mpegl russing ORF B coded TV 13005 ger mpeg missing ORF2 Q coded TV 13006 ger mpeg russing ORF coded TV 13007 ger mpeg missing GEF2 T coded TY 13008 ger mpeg fussing ORF V coded TV 13009 ger mpeg missing Leet ORF St coded TV 13010 ger mpeg missing ORFS K coded IV 13011 ger mpeg russing ATV coded
23. ption The SAT IF input signal is fed to the DVB S S2 front end where the selection of a transponder and its QPSK or 8PSK demodulation are done The data stream is routed by a switching matrix either to the Common Interface or directly to the DVB module consisting of a demultiplexer and a H 264 AVC amp MPEG2 decoder An analogue video and an associated stereo audio signal are generated within the DVB module The video signal is filtered and the audio signal is processed by a DA converter afterwards The SDB 908 supports the output of additional services like Teletext WSS VPS and optional the display of subtitle The analogue signal outputs were fed by buffer amplifiers for the pin assigment of the audio socket see chapter 8 The audio outputs are balanced to ground A respective CA module with smart card which is supported by the device has to be used for descrambling Multi service decryption is possible if there are not any restrictions by the CAM itself or by the service provider With this module its possible to choose elementary streams of a service for decryption So the ressources of the respective CAM smart card combination can be used optimally BISS decryption can be performed by activating the software option CKB 104 Supported are the BISS mode 1 and the BISS mode E with entering the necessary injected ID but not the BISS mode E with the optional buried ID The activation of the software option CKB 105 allows the output of t
24. rollers as follows AP Controller AP controller W100 Controller of terminals board 09 10 2013 JE JH 9726 01 86 01 MPEG4 Cl MPEG decoder VO 10 MPEG decoder 03 09 15 D 9726 01 67 01 ASI Encoder FPGA ASI encoder Wo 29 08 2013 FPGA ASI encoder 12 SDB 908 Part N 9726 02 9726 02 SAT TV Demodulator DVB S S2 CI ASI TS amp A V C LINE 11 Manual menu control at the Headend Controller HCB x00 Power Status SAT IF Symbol rate Standard No Service ID Audio 1 index Audio 2 index Audio description Dual mode audio 1 Dual mode audio 2 ASI polarity ASI TS source Audio gain Video output Colour system Colour bar VPS CNI code Source VPS audio Source VPS PI SDT PMT processing Mode CA PMT Use of date amp time Smart card activation mode CA check time Subtitling mode DVB language Use extended Teletext page Language group SDB 908 start Edit or close on off SAT IF input 950 2150 MHz 1000 45000 kSps auto DVB S DVB S2 Yes Program selection Language selection 1 Language selection 2 0 65535 0 47 0 47 Audio settings on off dual dual Il dual dual Il ASI settings normal inverse auto original TV sound 6 20 dB Video settings on auto off auto colour bar PAL SECAM NTSC on off VPS settings 0x000 OxFFF MPEG A056 MPEG L A056 PDC A056 PDC
25. rt N 9726 02 9726 02 DVB S S2 Cl ASI TS amp A V LINE 10 6 Multi decryption selection menu 5 SAT TV DEMODULATOR SDB 908 9f26 02 00 Address 00 00 Program selection Decoding settings ine MPEG 1 2 Subtil Selection Program name Status Pe l Audio PID drop list streams streams etreams streams ORF coded all vj iy ef ss ORF2 coded all 7 SE O a ORF2 W coded O O ro vl no z o i ORF2 N lcoded O O m vi no oO O e ORF2 B codd O O fro E no T O mE ORF2 0 coded O O m vi no O O oO ORF S coded O O fro E no o mE ORF2T leoded O O m I m a CU B ORF2 V coded O O ro E no E O Oo ORF St coded O O inc vi no oO O t tC Oo ORF2 K coded O OF ino E no T O LI ATV coded L E no na w CI Oo HITRADIO OF3 fee O O mw Woy a YT aa ORF2E fee O OF frw E no E 8 ets S E o Hallo TY German free f e O oO no oO O oO Hallo TV Espa a free f e O oO no J m O Oo Hallo TY Polska free free Oo o no no d Folz TV free d d no v J no EE d E RiC tee O OF w E ao a are e t eee momon ew OY OJ ee et e Reset CA module Simultaneous decoding of several programs depends on A module and smart card In this menu all services of the adjusted transponder and their CA status are listed The services are selectable for decr
26. siccssdscesace vans cacencneccsscndadvnebidcevassheiidaesetededeaamnceacdis bian 9 7 Multi decryption test ccceeecseeeeeeeeeeeeeeeeseeeeseeeesaeeeseeeseeseseeeeneeeeseeeeges 9 8 Multi decryption test InfOrmatiOn cccccsseeccseceeseseeseeeeesseeeeseeseesseeeess 9 9 Extended settings cececceccssecceseeceeeeceeecaeecsaaceeaeeeeseeseeesausesausesseeenseees 9 10 Factory S6MINGE screenie a ORE 9 11 Status of the device sssnnnsssnrensrrrrerrrrnrrrrrnrrrrrsrrrrnsrrrrnrrrrnsrrrensrrreene 9 12 Software OV CIVIC oases descr tase ceenissaricer aaae daaa iaai aeaa 10 Manual menu control at the Headend Controller ccccccssseeeeeeeeseeeeeees 11 Trap AMS SSA CS sessirnir eer EE Ea SE aaraa 12 Block diagram scnscuiscsuin scene tinnnsapenanantasiecsiceceacshavelacedeGesccaietsbuneesanstednsorasebentavens 13 Headend DUS SMUCIUTG scosiacastcansnacuceteudusteanncsn ces iemosecsecsteatistenasdiaencnunieiaesaune 14 Application example cccccecsesecsseeceeeecseeeceeeeseeeeaeeesseesaeesageesaaeesaesenaenes 15 TO CMIIC MAA urapi ie a E ERE RESE EIE NETE E EE A A AE 17 BIDIOQA DRY sesei EE EE A E 18 Document history ceece ceccseceeseesenecseneesseeenseeeaueeseuecseueessecessetsauenseneesentens CE Declaration of Conformity scicscessscccdaccsdecndsntanaddsaahissuncadenvassigsnnsdntausesidensasnce gt SDB 908 Part N 9726 01 9726 02 SDB 908 eae Soh bo SDB 908 SAT TV Demodulator
27. yption For each of this selected services one can determine what streams or PID s are to be decrypted That s important because the maximum number of the decryptable PID s is limited and this limit has a different size per CA module In the selection boxes MPEG 1 2 Audio Streams respective Subtitling Streams all no or individual streams are selectable If one wants to select more than one stream but not all the selection field all in the box is to be selected and in the column PID Drop list all PID s have to be entered that shall not be decrypted In the column PID Drop list all PID s are listed that shall not be decrypted The PID s can be given in decimal or hexadecimal format and have to be separated by a semicolon The maximum number of PID s is 10 Individual CA modules have to be initialized once again before the CA services will be sent to the module To do so the option Reset CA Modul can be activated 1 Other Audio Streams includes all AC3 and DTS streams Private Streams selects all streams which are not captured by the other selection fields Particularly PID s can be given here which are active only at times and no authorisation for decryption is available for them SDB 908 SAT TV Demodulator ce Part N 9726 02 9726 02 DVB S S2 Cl ASI TS amp A V LINE 10 7 Multi decryption test menu 6 Send selection to CA module Check program OR
Download Pdf Manuals
Related Search