Technical Data Description of Functions Operating Instructions г г г
Contents
1. and insert the new one taking care to ensure that the polarity corresponds to that indicated on the container The used battery must be disposed of correctly in the apt re cycling bins The product Radio commander Mx6 Complies with the requirements of Directive R amp TTE 99 5 EC CE2. Rapio Contrott MX6 6 channel transmitter with the capability for 12 and 18 bit code transmission and the division of codes for common and personal ised command management Mod Mx6 433 92 MHz Technical Data Battery power supply 12VDC 23A Working Frequency See Model Possible code combinations 262144 Max consumption 25mA Working Temperature 20 70 C Dimensions 45x75x14mm 12 swi Wannnnnnina 12345678910 Description of Functions The transmitter has six buttons for the separate operation of 6 dif ferent users Operating Instructions a Standard configuration T1 T3 12 bit T4 T6 18 bit b Configuration with T1 T6 18 bit c Channel division 1 common 5 private d Channel division 2 common 4 private e Channel division 3 common 3 private a Standard configuration T1 T3 12 bit T4 T6 18 bit The transmitter is setup at the factory with the following configura tion SW2 dip 1 and 2 off Jumper J1 open and buttons T1 T3 12 bit T4 T6 18 bit Maintaining compatibility between the TX mono bi trichannel model and buttons T1 to T3 b Configuration with T1 T6 18 bit To set up the transmitter with all buttons generating 18 bit code connect the two poles of the J1 jumper c Channel division 1 common 5 private To set up the transmitter to generate 1 common code e g for a condominium and 5 private users set SW2 dip 1 to ON and di
3. p 2 to OFF As the channel division is type 4 6 the first 4 dip of SW1 are for programming the common code and the remaining 6 dip are for programming the private code The set up of buttons T1 to T3 for 12 of 18 bit transmission is con trolled by Jumper J1 see points a and b above d Channel division 2 common 4 private To set up the transmitter to generate 2 common codes e g for a condominium and 4 private users set SW2 dip 1 to OFF and dip 2 to ON As the channel division is type 4 6 the first 4 dip of SW1 are for programming the common code and the remaining 6 dip are for programming the private code The set up of buttons T1 to T3 for 12 of 18 bit transmission is con trolled by Jumper J1 see points a and b above e Channel division 3 common 3 private To set up the transmitter to generate 3 common codes e g for a condominium and 3 private users set SW2 dip 1 and 2 to ON As the channel division is type 4 6 the first 4 dip of SW1 are for pro gramming the common code and the remaining 6 dip are for pro gramming the private code The set up of buttons T1 to T3 for 12 of 18 bit transmission is con trolled by Jumper J1 see points a and b above WARNING The alkaline 12VDC 23A battery must be changed every year in order to guarantee the correct functioning of the trans mitter In order to substitute the dead battery remove the plastic cov er by sliding it off take the old battery out
Download Pdf Manuals
Related Search