Fortress Railing Products 52503000 Installation Guide
Contents
1. with a hooded flush type cover plate receptacle marked Wet Location is available a licensed electrical contractor must install a GFCI outlet at the required location Run 18 2 gauge stranded outdoor wire by routing in close proximity to the luminaire or fitting or next to a building structure such as a house or deck Wire should not be buried Total Wattage of lights in system should not exceed 30 watts If additional lights are required a second transformer must be used Do not connect two or more transformers in parallel Please visit www fortressaccents com for information on how to order additional accessories For technical assistance please email technicalhelp fortressrailing com Hours of Operation Monday through Friday 8 00 AM to 5 00 PM CST Phone 1 866 323 4766 Fax 972 644 3720 www fortressaccents com2. Installation Instructions FORTRESS ccenl FortressAccents 30W Transfomer It is the responsibility of the installer to meet all code and safety requirements The installer should determine and implement the appropriate installation techniques for each situation The Fortress Company or its distributors shall not be held liable for improper or unsafe installations WARNING Risk of Electric Shock Install power unit 10 feet 3 05 m or more from a pool spa or fountain Where the power unit is installed outdoors connect power unit to a receptacle protected by a GFCI READ INSTALLATION INSTRUCTIONS BEFORE WIRING e NOT FOR USE WITH DIMMERS FOR OUTDOOR USE ONLY MOUNT AT LEAST 12 30 48 cm ABOVE GROUND e NOT FOR USE WITH SUBMERSIBLE FIXTURES DO NOT CONNECT TWO OR MORE TRANSFORMERS IN PARALLEL Required Materials Phillips Head Screw Driver Wire Cutters Wire Strippers Eye Protection Tape Measure Power Switch not included FortressAccents Transformer Output wire 41 105 cm 30W DC12V Transformer must be installed more than 12 30 48 cm above the ground Determine the best location for the transformer based on your lighting layout Transformer should be located as close to the first luminaire as possible Supplied input wire with plug must be connected to a GFCI protected outlet with a hooded flush type cover plate receptacle marked Wet Location Do not to use an extension cord If no GFCI protected outlet
Download Pdf Manuals
Related Search