Kenroy Home 32669BW Installation Guide
Contents
1. CK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 32669BW INSTRUCTIONS2. MODEL 32669BW PACKING_DIAGRAM SOCKET ASsEMBLy O INAL RUBBER WASHER CLEAR SHADE 3e669SHBW REPLACEMENT PART HARP HARP9 5 REPLACEMENT SOCKET a AVAILABLE PART IS 32669SHBW SHADE HARP9 5 HARP ASSEMBLY INSIRUCTIIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY AND BASE TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAM 2 SCREW SOCKET ASSBEMBLY TO TOP OF BODY 3 PULL THE EXCESS POWER CORD THROUGH THE BASE 4 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 5 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER WASHER AND FINIAL 6 INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE A 3 WAY BULB NOT INCLUDED INTO SOCKET 7 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BA
Download Pdf Manuals
Related Search