Minka Lavery 4750-206 Installation Guide
Contents
1. INSTALLATION INSFRUCTIONS FOR 4750 206 me oe Mount titiis Installation see fig 1 I Disconnect power at main electrical panel before installation l 2 Thread the two mounting screws about 1 4 into the pre drilled holes in the mounting plate spaced abont the same distance apart as the holes in the fixture back plate Attach the mounting plate to the junction box using two junction box screws The side of the mounting plate marked GND must face out 3 Guide fixture wires through hole in center of mounting plate 4 Follow wiring instructions carefully see fig 2 5 Mount fixture by aligning mounting holes in fixture back plate with mounting screws and threading ball nuts F omo mounting screws 6 Mark the location for plastic anchors on wall Be sure to check for level before installing plastic anchors 7 Mount the plastic anchor to the wall and use the wood screw to tighter the back plate of the fixture body E 8 Attach the metal trim D the glass shade C and the collar ring B to the lamp holder on the fixture body E then look securely with the check ring A 9 Install the light bulbs m accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING Wiring see fig 2 1 Connect the electrical wires as follows Connect the Biack wire from the fixture to the black house hot wire Connect the white wire from the fixture to th2. e white neutral house wire Make sure all wire uts are secured You may wrap the connections with electrical tape If your outlet box has a ground wire green or bare copper connect fixture s ground wire to it Otherwise attach the bare copper fixture wire to the green ground screw on the mounting plate Tuck the wire connections neatly mto the wall junction oS FIXTURE FIRES VIRES i D gmepfcan nite or ghtligg Ribbed Copper HOUSE Ground POSE USTED ELH ation FIRES White nea ar Neutral Bare Copper Ground
Download Pdf Manuals
Related Search