Minka Lavery 823-77 Installation Guide
Contents
1. INSTALLATION INSTRUCTION FOR FIXTURE 823 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER MOUNTING THE FIXTURE Fig 1 Shut off the power supply at the fuse box or circuit breaker If necessary remove the old fixture and all mounting hardware Carefully unpack your new fixture and lay out all the parts in a clear area Take care not to lose any parts necessary for insiallation Attach the cross bar B to the outlet box using the outlet box screws A Size 8 32 1 L The side of the cross bar marked GND must face out Follow the wiring instructions carefully Fig 2 Thread the mounting screws C 1 4 into the cross bar B Attach the fixture pan D to the cross bar B by protruding the mounting screw C Size 8 32 1 5 L through the keyholes in the pan D then rotate the pan D until the mounting screw C Size 8 32 1 5 L are seated in the slots of the keyholes then tighten the screws with a screwdriver Install the bulb s in accordance with fixture s specifications DO NOT EXCEED THE MAXMUM WATTAGE RATING NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE Place the glass shade E over the ring F and secure the ring F onto the pan D using the finials G Your installation is now complete Return power to the outlet box and test the fixture Set A 010 Cross Bar Ground Screw Mounting screws 2 CROSS BAR B MOUNTING SCREWS C SIZE 8 32 1 5 L Wirin2. g Fig 2 1 Connect the electrical wires as shown in figure 2 making sure that all wire connectors are secured If your outlet box has a ground wire green or bare copper connect the fixture s ground wire from the cross bar to it Otherwise connect the fixture s ground wire directly to the mounting plate using the green screw provided After the wires are connected tuck them carefully into the outlet box GREEN OR BARE COPPER GROUND HOUSE ES GREEN OR BARE COPPER GROUND GREEN GROUND SCREW OUTLET BOX SCREWS A SIZE 8 32 1 L PAN D 7 Ns SHADE E 1 i A ea eee i Intertek RINGIF american lighting association
Download Pdf Manuals
Related Search