HeatTrak HR-P Installation Guide
Contents
1. You will need one Power Unit for each set of HeatTrak mats The Power In certain instances you may need a 20 Inch Cable Extender to create longer cable lengths between mats Follow this rule Unit connects your mats to a 120V electrical outlet and allows power to E Starting from the Power Unit wherever a Stair Mat leads to a Walkway Mat you will need a 20 Inch Extender flow to the mats Here are some scenarios You can connect up to 15 Amps on a single Power Unit Each Walkway Mat is 2 5 Amps and each Stair Mat is 0 6 Amps So you can connect either 5 Walkway Mats 15 Stair Mats or any combination thereof If your connected mats exceed 15 Amps you will have to split up the mats and add a second Power Unit to plug into a separate outlet Female Connector Male Connector You will need a 20 Inch CableExtender Walkway Mats are 20 x 60 inches Stair Mats are 10 x 30 inches You will need one Walkway Mat for every 5 feet of sidewalk and one Stair Mat for each stair For example If you have a 20 foot walkway and 3 stairs you will need 4 Walkway Mats 3 Stair Mats and 1 Power Unit Power Unit You will need a 25 Foot Cable Extender Each mat has a male and female connector To connect the mats connect the male connector on one mat to the female connector on another mat The Power Unit can only connect to the male connector on a mat 20 Inch Cable Extender Female Connector lt To wall outlet Powe2. r Unit Connector Stair Mat aan Female colle connector If your outlet is further than 6 feet from Walkway Mat your Power Unit you will need an outdoor rated extension cord or HeatTrak 25 Foot Cable Extender available online
Download Pdf Manuals
Related Search