The Cement Store Green Label Super Gloss Installation Guide
Contents
1. TH E See Apply GREEN LABEL SUPER GLOSS as a finish or top coat on fully cured concrete after 28 days which has P een previously sealed with BLUE LABEL CURE amp SEAL Will darken surface Follow SURFACE PREPARATION steps o not apply in wet weather or if rain is expected in 24 hours he product supplied is formulated at the consistency for application DO NOT DILUTE Any dilution will reduce the performance and gloss horoughly mix before applying O NOT apply in DIRECT SUNLIGHT see YouTube videos 7 Apply product on a dry surface when air and surface temperatures are between 5 C 30 C and will remain IMPORTANT between 5 C 30 C for at least 4 hours after applying WHAT TYPE OF SEALER WAS APPLIED BEFORE Use a solvent resistant poly wool roller with a nap to match the surface being treated or spray with a If WATER BASED sealer has been applied at any time in the past it must professional sprayer be completely removed before applying ANY new sealer DONOT pour directly from container onto surface Always use a tray amp a solvent resistant tray liner RED LABEL WHITEOUT will remove old sealer Donotruna roller dry do sections small enough to maintain a wet edge SURFACE PREPARATION Some areas may be more porous than others and may require additional coats to even out final appearance and provide extra protection Once WATER BASED sealer has been removed or if applying over Sealer should not be2. allowed to puddle or run SOLVENT BASED sealer On vertical surfaces apply sealer from the bottom up to prevent unevenness from runs The basic rule for time between coats is 24 hours 1 Surface must be clean and free of dirt debris oil and contaminants You will be able to walk on it within 2 hours and drive on it with 24 48 hours 2 Use TCS OILOUT oil spot remover as per directions if necessary You are applying a premium acrylic coating and the sealed surface will be slippery when wet For added 3 Use TCS PINKPREP cleaner degreaser as per directions safety please use TCS SHARK GRIP anti slip additive 4 parte alone lg and give ample time 24 hours HIGHLY FLAMMABLE 5 Repair any scratches peeling white marks or blushing with RED Refrain from smoking when using the product Use an efficient extractor fan if the product is LABEL WHITEOUT as per directions applied in an enclosed area Vapours may form an explosive mixture in the air STORAGE Keep container tightly closed when not in use Keep away from heat from open flame Keep out of reach of children Do not freeze See our website for TIPS and further information mus greenlabelsealer com fu ooo s Approx 125 200 sq ft per gallon Coverage varies due to porosity and condition of concrete surface PRODUCT OF CANADA 18 9 L 5 Gallon RESIN SOLUTION flammable Class 3 UN 1866 PGII CLEAN UP Use a solvent like RED LABEL WHITEOUT to clean tools
Download Pdf Manuals
Related Search