Wayne-Dalton KEP-IV Operating Instructions
Contents
1. Wireless Keyless Entry Model KEP IV Operating Instructions and Owner s Manual Control Garage Door Opener and HomeSettings Home Controls System with a secure Personal Identification code PIN Thank you for purchasing the Wireless Keyless Entry KEP IV The Wireless Keyless entry uses a state of the art rolling code radio frequency RF transmitter to control compatible peripherals Your new Wireless Keyless Entry can open and close your garage door when used with a Wayne Dalton idrive or prodrive garage door opener In addition The Wireless Keyless Entry can control any brand garage door opener when used in conjuction with the Wayne Dalton Garage Door Opener Conversion Module model WDRR 372R For added functionality The Wireless Keyless Entry can control scenes in a Z Wave enabled network when used in conjunction with a Wayne Dalton Wireless Gateway model WDHA 12R A Z Wave enabled network is made of modules which are capable of controlling indoor and outdoor lighting security systems thermostats door locks etc Go to www wayne dalton com access for more information PACKAGE CONTENTS MaN Mounting Screws ode s User Manual Wireless Keyless Entry a Table of Contents introduction Package Content eerrceccrsccececessccsceesesusccusecscecscenscensrenseeaseceserasereseeee tts 1 VAMOS andiGloss Aes areca acc E aoa sean 2 Programming to Open a A A 3 MOUNINO AEA R ap rp nr 4 Operation2. Battery Replacement a eecccsc ccssecaseeaeee scot csevaccsscesuecreessrusaceunesuscveserenseacecs 5 Programming Operation Examples of use with Wireless Gateway 6 7 Warant Compianc e erates caesar care areue tee deaeaege E dud ecuasaeaeeeaeaeeeaeesace 8 Look for the Quick symbol for basic instructions Start Definition of Symbol AN Warning Installation Safety Precautions Never let children operate or play with door controls Keep remote controls away from children Fatal injury could result should a child become trapped between the door and the floor D Always keep moving door in sight and keep people and objects away until it is completely closed To prevent serious injury or death avoid standing in the open doorway or walking through the doorway while door is moving D Copy See Replicate Delete Erase transmitter or SCENE information from Controller Also known as Exclude Device Any item that is connected to a Z Wave module for example lamps Exclude Remove a module from the controller Include Add a module to the controller LED Light emitting diode Module Any HomeSettings or Z Wave product that is controlled with a HomeSettings or Z Wave remote controller A module can be part of more than one scene Network A collection of devices controlled by primary or secondary controllers operating on the same system A network has its own unique identification code so tha
3. Scene is now complete The LED on the Wireless Gateway will USE KEYPAD TO flash three 3 times quickly to indicate the INPUT 4 DIGIT programming is successful PIN CODE Note Your KEP IV cannot directly operate Z Wave modules the Z Wave modules must be programmed to the Gateway Scene to which you have programmed your ON OFF RESET KEP IV PIN code See the Gateway User Manual for instructions on programming Z Wave modules Note Each Scene on the Gateway must be programmed with a different PIN KEP IV Operation with Gateway To operate a Wireless Gateway Scene 1 Activate your keypad by pressing the ON OFF RESET button and the keypad will USE KEYPAD TO illuminate INPUT 4 DIGIT 2 Enter the 4 digit PIN personal identification PIN CODE number for the specific Scene you want to activate 3 Your Keypad will turn off automatically in 15 seconds or you may manually turn it off ON OFF RESET Aemoje 0 Huitweibold Examples of KEP IV Gateway Use Examples of how your KEP IV can be used with the Wireless Gateway WDHA 12R are described below For further ideas please visit our website at www wayne dalton com access 1 Deck Patio Barbecue Area Mount the KEP IV in a convenient location and pair it with the Gateway to control outside lighting Use it to turn on or off your flood lights and landscape lighting and control pre configured dimmed mood Scenes NOTE One KEP IV may be used with multiple Ga
4. bove THE MANUFACTURER WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES including but not limited to damage or loss of other property or equipment personal injury loss of profits or revenues business or service interruptions cost of capital cost of purchase or replacement of other goods or claims of third parties for any of the foregoing Some States do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you No employee distributor dealer representative or other person has the authority to modify any term or condition contained in this Limited Warranty or to grant any other warranty on behalf of or binding on the Manufacturer and anyone s attempt to do so will be null and void Buyer should be prepared to verify the date of installation to the satisfaction of the Manufacturer The rights and obligations of the Manufacturer and Buyer under this Limited Warranty will be governed by the laws of the State of Ohio USA to the extent permitted by law e This Limited Warranty gives you specific legal rights and you may also have other rights which may vary from State to State FCC and IC Statement FCC Regulatory Information NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable prote
5. ction against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try and correct the interference by one or more of the following measures a reorient or relocate the receiving antenna b increase the separation between the equipment and receiver c connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help IC Regulatory Information This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device Cet appareillage num rique de la classe B r pond a toutes les exigences de l interference canadienne causant des r glements d quipement L op ration est sujette aux deux conditions suivantes 1 ce disp
6. e will remain in the learn mode for 30 seconds The prodrive Quantum or Classicdrive opener will remain in learn mode for 60 seconds 4 Open the cover of the KEP IV then push the ON OFF RESET button of the keyless entry The Keyless Entry keypad will light indicating it has been activated and is waiting for commands illumination may not be visible in direct sunlight 5 Press the desired four digit PIN number then hold the 0 key until the door moves oe ce example 1 2 3 4 0 Release the 0 key Programming is now complete PIN CODE NOTE Jf at any time an error was made in entering the codes simply press the ON OFF RESET button and repeat the above procedures NOTE One KEP IV can be programmed to open multiple garage door openers To program for additional openers repeat steps 1 through 5 above except input a different four digit PIN number for each additional opener Only I PIN can be programmed to each garage door opener Jauadg 0 Hurlwweboid Mounting the KEP IV CAUTION MOUNT THE KEP IV A MINIMUM OF 5 FEET FROM THE FLOOR TO KEEP IT OUT OF THE REACH OF SMALL CHILDREN With new installations the KEP IV should be programmed before mounting to wall 1 Choose a convenient location that does not interfere with the normal opening and closing operation of the door such as the door jamb but is within sight of the door 2 Two screws are included for proper mounting into wood
7. ng and will stop and reverse the door direction if it is closing KEP IV Battery Replacement WARNING IF BATTERY IS SWALLOWED CONTACT PHYSICIAN IMMEDIATELY WARNING FIRE AND BURN HAZARD DO NOT RECHARGE DISASSEMBLE HEAT OR INCINERATE KEEP BATTERY OUT OF THE REACH OF SMALL CHILDREN INSTALL BATTERY CORRECTLY DISPOSE OF USED BATTERIES PROMPTLY USE COIN TO PRY OPEN BATTERY NOTE Replace the 9 volt battery when COVER keypad light becomes dim or does not light up 1 Raise Keyless Entry Cover to expose battery cover 2 Snap open battery cover with a coin and remove old battery BATTERY 3 Replace 9V battery then replace battery COVER cover BATTERY juawaIe day Ala eg uole19dg Programming KEP IV to Wireless Gateway To program a PIN to a Scene button on the Wireless Gateway WDHA 12R or to reassign a PIN to a Scene button 1 Press and Hold the Scene button you wish to program on the Wireless Gateway either scene 1 2 or 3 until the LED turns off then immediately release the Scene button before the LED turns on again 2 Open the cover of the KEP IV then push the ON OFF RESET button of the keyless entry The CHOOSE 1 Keyless Entry keypad will light indicating it has SCENE BUTTON been activated and is waiting for commands illumination may not be visible in direct sunlight 3 Press the desired four digit PIN number example 1 2 3 4 Programming to the
8. or any alteration of the product or its components abuse fire Acts of God failure to properly maintain the product or attempt to use the product its components or related products for other than its intended purpose and its customary usage This Limited Warranty does not cover ordinary wear THIS LIMITED WARRANTY COVERS A CONSUMER PRODUCT AS DEFINED BY THE MAGNUSON MOSS ACT NO WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WILL EXTEND BEYOND THE TIME PERIOD SET FORTH IN UNDERSCORED BOLD FACE TYPE IN THIS LIMITED WARRANTY ABOVE Some States do not allow limitations on how long an implied warranty lasts so the above limitations may not apply to you Any claim under this Limited Warranty must be made in writing within the applicable warranty period to the dealer from which the product was pur chased Unless the dealer is no longer in business a written claim to the Manufacturer will be the same as if no claim had been made at all At the Manufacturer s option pursuant to the dealer having notified the Manufacturer of a warranty claim a service representative may inspect the prod uct on site or Buyer may be required to return the product to the Manufacturer at Buyer s expense Buyer agrees to cooperate with any representative of the Manufacturer and to give such representative full access to the product with the claimed defect and full access to the location of i
9. or other similar material A 5 64 X 3 4 pilot hole may need to be drilled for the mounting screws If mounting to other materials consult a qualified building or hardware specialist for the proper hardware to insure secure mounting 3 Insert Upper screw into upper pilot hole leaving head of screw 1 16 away from wall as shown in the illustration to the right 4 Slide and lock back keyhole slot over exposed screw and position unit vertically 5 Remove battery door to expose lower screw mounting hole 6 Insert lower screw and tighten 7 Replace battery door KEP IV WIRELESS KEYLESS LEAVE UPPER SCREW HEAD AWAY 1 16 FROM WALL thas M LOWER SCREW MOUNTING HOLE LOCATED BEHIND BATTERY COVER ununoN KEP IV Operation with Opener To OPEN CLOSE START and STOP your garage door opener 1 Activate your keypad by pressing the ON OFF RESET button The keypad will illuminate 2 Enter the 4 digit PIN personal identification USE KEYPAD number for the garage door opener you want TO INPUT to operate The opener will begin to move the 4 DIGIT PIN door NOTE The opener will not move the door if the incorrect PIN is entered Reset the KEP IV by pressing the ON OFF RESET button and enter the correct PIN ON OFF RESET C1 3 The KEP IV will remain active for 15 seconds pressing any key except the ON OFF RESET button will stop the opener from Opening the door if it is openi
10. ositif peut ne pas causer l interf rence nocive et 2 ce dispositif doit accepter n importe quelle interf rence re ue y compris l interf rence qui peut causer op ration peu d sir e WARNING Changes or modifications not expressively approved by the party responsible for compliance could void the user s authority to operate the equipment The term IC before the radio certification number only signifies that Industry Canada technical specifications were met Copyright 2008 Wayne Dalton Corp Part No 0001684 Rev A 04 03 08 You can reach us for Consumer Assistance online at www wayne dalton com access aoueljdwoy Aueue
11. t no one else can control the system Opener Garage Door Opener Primary Controller The first controller used to set up your modules and network NOTE Only the Primary Controller can be used to include or delete modules from a network It is recommended that you mark the primary controller for ease in modifying your network Replicate Copy from one controller to another PIN Personal Identification Number set by person programming the KEP IV Scene A scene is a Series of Z Wave modules programmed to activate a specific level on off dim with the push of a button on a controller Transmitter Garage Door Opener transmitter Asesso 5 6uiuse Programming KEP IV to Opener To program the KEP IV to an Opener or to change an existing PIN PROGRAM PROGRAM 1 With new installations it is recommended to program the KEP IV before mounting to wall otherwise proceed to Step 2 2 Unit can be programmed with garage door in either up or down position l IDRI E TORSION IDRIVE TORQUEMASTER 3 Press the transmitter PROGRAM BUTTON on Me Aes DoorMaster light fixture idrive prodrive Quantum or Classicdrive opener LED will light or idrive opener will beep once indicating that it is ready to learn a transmitter See Illustration on right f PROGRAM The idrive and idrive Torsion opener will BUTTON uel remain in the learn mode for 30 seconds The POMER ae DoorMaster light fixtur
12. teways to achieve the desired number of Scenes 2 Pool Hot Tub Area Use the battery powered KEP IV paired to the Gateway to safely control outdoor and landscape lights from a pool hot tub area Create pre configured dimmed mood scenes on the Gateway and activate them using the KEP IV 3 Outbuildings Turn on off the lighting of your outbuildings from your back door for convenience and safety 4 Yard Landscape Lighting Turn on off your yard flood lights or landscape lighting from outside Save time and extra effort by mounting a KEP IV near your garden tools to control your outdoor lighting Covered by one or more of the following Patents D413 579 6 903 650 7 173 514 7 327 107 Other US and Foreign Patents pending Examples require the following modules X Number required for your particular application 1 Wireless Gateway WOHA 12R 1 Wireless Keypad Entry KEP IV X Dimmer Switch Module HA O6WD for each in wall mounted light switch X Outdoor Module HA 04WD for outside landscape lighting 1 Wireless Gateway WDHA 12R 1 Wireless Keypad Entry KEP IV X Dimmer Switch Module HA O6WD for each in wall mounted light switch X Outdoor Module HA 04WD for outside landscape or pathway lighting 1 Wireless Gateway WOHA 12R 1 Wireless Keypad Entry KEP IV X Dimmer Switch Module HA O6WD for each in wall mounted light switch X Appliance Module HA O02WD for power equipment or ligh
13. ting 1 Wireless Gateway WDHA 12R 1 Wireless Keypad Entry KEP IV X Dimmer Switch Module HA O6WD for each in wall mounted light switch X Outdoor Module HA 04WD for outside landscape or pathway lighting Uu9 eg sajdwexy Limited Warranty Wireless Keyless Entry Model KEP IV Subject to the terms and conditions contained in this Limited Warranty Wayne Dalton Corp Manufacturer warrants the Wireless Keyless Entry including electronic components Batteries are not warranted which is described at the top of this page for a period of ONE 1 YEAR from the date of installation against i Any defects in material or workmanship This Limited Warranty is extended only to the person who purchased the product and continues to own the premises where the product is installed as his her primary residence Buyer This Limited Warranty does not apply to residences other than primary or to commercial or industrial installations or to installations on rental property even when used by a tenant as a residence This Limited Warranty is not transferable to any other person even when the premises is sold nor does it extend benefits to any other person As a result this Limited Warranty does NOT apply to any person who purchases the product from someone other than an authorized Wayne Dalton dealer or distributor The Manufacturer will not be responsible for any damage attributable to improper storage improper installation
14. ts installation lf the Manufacturer determines that the claim is valid under the terms of this Limited Warranty the Manufacturer will cause the defective product to be repaired or replaced The decision about the manner in which the defect will be remedied will be at the discretion of the Manufacturer subject to applicable law THE REMEDY WILL COVER ONLY MATERIAL THIS LIMITED WARRANTY DOES NOT COVER OTHER CHARGES SUCH AS FIELD SERVICE LABOR FOR REMOVAL INSTALLATION SHIPPING ETC Any repairs or replacements arranged by Manufacturer will be covered by and subject to the terms conditions limitations and exceptions of this Limited Warranty provided however that the installation date for the repaired or replaced product will be deemed to be the date the original product was installed and this Limited Warranty will expire at the same time as if there had been no defect If a claim under this Limited Warranty is resolved in a manner other than described in the immediately preceding paragraph then neither this Limited Warranty nor any other warranty from the Manufacturer will cover the repaired or replaced portion of the product THE REMEDIES FOR THE BUYER DESCRIBED IN THIS LIMITED WARRANTY ARE EXCLUSIVE and take the place of any other remedy The liability of the Manufacturer whether in contract or tort under warranty product liability or otherwise will not go beyond the Manufacturer s obligation to repair or replace at its option as described a
Download Pdf Manuals
Related Search