Tripp Lite PAM-1 User's Manual
Contents
1. TRIPP LITE Owner s Manual Addendum POWER PROTECTION PAM 1 1111 W 35th Street Chicago IL 60609 USA ae Customer Support 773 869 1234 Wirin g Instructions www tripplite com Connecting a PAM 1 to the Output of a Unison SU6K or SU10K WARNING Before connection make sure that your Unison system is OFF that both input and output breakers are switched OFF and that the system is not connected to AC power See Unison Owner s Manual e Remove the PAM 1 s input plug by loosening its strain relief unscrewing and removing the plug s housing detaching the power cord s four internal colored wires from their terminals and sliding off the plug e Strip an additional 1 to 2 of the outer black casing of the power cord away from the internal colored wires Neatly shape the exposed metal ends of the four colored wires to eliminate loose strands e Slip the strain relief provided over the exposed end of the power cord then thread the exposed end of the power cord through the knockout nearest the right of the Unison s terminal block e Connect the colored wires to the Unison s terminal block as shown below The black cord can be connected for either 240V output or 208V output Note the desired output voltage MUST match the Unison s input voltage See Unison Owner s Manual e Tighten the strain relief and affix it to the knockout Red White Green Black Black a ie lg JOE L1 L2 G G 208V 240V 120V 2402. V 120V AC INPUT INPUT 208V VOLTAGE SELECT Note This diagram shows the terminal block of a SU6KVA model SU10kVA models have double connectors but the wires are attached to the same terminals on both models Copyright 1999 Tripp Lite All rights reserved Unison is a registered trademark of Tripp Lite 93 1466 9909163 10 99
Download Pdf Manuals
Related Search