Technics SU-C700 Operating Instructions
Contents
1. To su cr00 This unit rear Coaxial digital cable Coaxial digital cable L e Use the system connection cables and the coaxial digital cables supplied with the ST C700 SL C700 e Connect the system connection cables to the system terminals CONTROL1 CONTROL2 Connect the ST C700 to CONTROL1 and the SL C700 to CONTROL2 e Connect coaxial digital cables to the digital audio input terminals COAX1 IN COAX2 IN Connect the ST C700 to COAX1 IN and the SL C700 to COAXz2 IN 10 Connecting to analog audio output devices You can input analog audio signals to this unit and play back music e g This unit Record player rear Blu ray Disc player etc PHONO AUDIO OUT Audio cable Audio cable not supplied not supplied 1 When connecting to a record player with a built in PHONO equalizer connect its cable to the analog audio input terminal LINE IN 2 When connecting a record player with a ground wire connect the ground wire to the PHONO EARTH terminal PHONO EARTH of this unit Connecting to digital audio output devices You can input digital audio signals to this unit and play back music e g This unit CD player etc rear CD player etc ACIN OPTICAL OUT L Al rr iS N U Optical digital audio cable Coaxial digital cable not supplied not supplied COAXIAL OUT L The digital audio input of this2. Canada Inc Technics Stereo Integrated Amp 3 three years parts and labour Technics Network Audio Player 3 three years parts and labour Technics Speaker System 3 three years parts and labour Technics Compact Disc Player 2 two years parts and labour This warranty is given only to the original purchaser or the person for whom it was purchased as a gift of a Technics brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada which product was not sold as is and which product was delivered to you in new condition in the original packaging IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by Panasonic Canada Inc or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office resta
3. INPUT INPUT ia CEST F ol m T O NWP cD E E o a Glo RETURN E Buttons that work for this unit AMP Standby on switch Press to switch the unit from on to standby mode or vice versa In standby mode the unit is still consuming a small amount of power e The remote control do not operate when the power switch lever is in the lowered position AMP NWP CD Select the device to be operated AMP LINE indicator lights up NWP COAX1 indicator lights up CD COAXz2 indicator lights up gt INPUT lt Select the input source gt 13 DIMMER Adjust the brightness of the light and the indicators Each press of this button switches the brightness LAPC Measure the characteristics of the amplifier and correct its output gt 13 VOL Adjust the volume MUTE Mute the sound Input indicator blinks Press MUTE again to cancel E Buttons that work for the ST C700 SL C700 The remote control of this unit also works for the ST C700 SL C700 For information on the operations of the ST C700 SL C700 please also refer to their operating instructions Standby on switch for the ST C700 Standby on switch for the SL C700 Select the device to be operated Select the input source of the ST C700 Adjust the display brightness Q Display HOME menu Change the displayed information
4. Panasonic Corporation of North America referred to as the warrantor will for the length of the period indicated on the chart below which starts with the date of original purchase warranty period at its option either a repair your product with new or refurbished parts b replace it with a new ora refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by the warrantor Product or Part Name Parts Labor Technics Stereo Integrated Amp Technics Network Audio Player 3 three years 3 three years Technics Speaker System Technics Compact Disc Player 2 two years 2 two years During the Labor warranty period there will be no charge for labor During the Parts warranty period there will be no charge for parts This Limited Warranty excludes both parts and labor for non rechargeable batteries antennas and cosmetic parts cabinet This warranty only applies to products purchased and serviced in the United States This warranty is extended only to the original purchaser of a new product which was not sold as is Mail In Service Online Repair Request Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at www panasonic com support When shipping the unit carefully pack include all supplied accessories listed in the Owner s Manual and send it pr
5. ST C700 are connected For details visit www technics com support Listening to audio from a PC etc You can connect the digital audio input terminal PC and a PC etc with a USB cable and play back music on the PC etc with this unit Connecting to a PC Before connecting to a PC follow the steps below Refer to the following for the recommend OS versions for your PC Windows Vista Windows 7 Windows 8 Windows 8 1 OS X 10 7 10 8 10 9 10 10 Download and install the dedicated driver to the PC Only for Windows OS Download and install the driver from the website below www technics com support Download and install the dedicated app Technics Audio Player free of charge on your PC Common to both Windows OS and OS X Download and install the app from the website below www technics com support as of November 2014 1 Disconnect the AC power supply cord 2 Connect this unit and a PC etc e g This unit PC etc rear ACIN USB 2 0 cable not supplied 3 Connect the AC power supply cord to this unit and raise the power switch lever to the I position gt 12 4 Press gt INPUT lt below AMP repeatedly to select PC 5 Operate the PC etc for playback 6 Press VOL to adjust the volume e OS X is a trademark of Apple Inc registered in the U S and other countries e Windows and Windows Vista are either registered trademarks
6. Selection OK Return to the previous display Enter menu Turn on off Direct mode Turn on off Re master Basic playback control buttons Numeric buttons etc Getting started Turn off all equipment before connection and read the appropriate operating instructions e Do not connect the AC power supply cord until all other connections are complete Insert the plugs of the cables to be connected all the way in e Do not bend cables at sharp angles Speaker connection e g SB C700 Speaker cable SB C700 This unit rear 1 Turn the knobs to loosen them and insert the core wires into the holes 2 Tighten the knobs LEI When the connections are completed pull the speaker cables lightly to check that they are connected firmly DO NOT e Be careful not to cross short circuit or reverse the polarity of the speaker wires as doing so may damage the amplifier A e Wire the polarity of the terminals correctly Not doing so may adversely affect stereo effects or cause malfunction e For details refer to the operating instructions of the speakers System control connection to an ST C700 SL C700 You can input digital audio signals to this unit and play back music e You can automatically link this unit with the ST C700 SL C700 and operate them easily with the remote control gt 14 ST C700 System connection cable SL C700 System connection cable
7. as of December 2014 These may be subject to change e Do not use AC power supply cord with other equipment E Using the remote control Insert the battery so the terminals and match those in the remote control Point it at the remote control signal sensor on this unit gt 7 e Keep the batteries out of reach of children to ae prevent swallowing R03 LR03 AAA Alkaline or manganese batteries Unit care Pull out the AC power supply cord from the outlet before maintenance Clean this unit with a soft cloth e When dirt is heavy wring a wet cloth tightly to wipe the dirt and then wipe it with a soft cloth e Do not use solvents including benzine thinner alcohol kitchen detergent a chemical wiper etc This might cause the exterior case to be deformed or the coating to come off Control reference guide This unit E Front Power switch lever Turn on off this unit The remote control do not operate when the power switch lever is in the lowered position Headphones jack For connecting a headphone plug When a plug is connected the speakers do not output sound e Excessive sound pressure from earphones and headphones can cause hearing loss Listening at full volume for long periods may damage the user s ears LAPC indicator gt 13 The indicator lights up when amplifier output correction is on Volume knob Adjust the volume When this unit is muted if you
8. or trademarks of Microsoft Corporation in the United States and or other countries 15 16 Troubleshooting Before requesting service make the following checks If you are uncertain about some of the check points or if the solutions indicated in the following guide does not resolve the issue then consult your dealer for instructions To return all settings to the factory defaults When the following situations occur reset the memory e There is no response when buttons are pressed e You want to clear and reset the memory contents When the unit is off Press and hold AMP W While continuing to hold AMP raise the power switch lever of this unit to the position e Keep holding AMP W until the PC indicator and the COAXz2 indicator blink twice Heat buildup of this unit e This unit becomes warm when the volume is high This is not a malfunction A humming sound can be heard during playback An AC power supply cord or fluorescent light is near the cables Keep other appliances and cords away from the cables of this unit e Set the ATTENUATOR switch to ON gt 7 eA strong magnetic field near a TV or other device may adversely affect the audio quality Keep this unit away from such devices e The speakers may output noise when a device nearby is emitting powerful radio waves such as when a mobile phone is on a call No sound e Check connections to speakers and other equipm
9. original carton Include details of the defect claimed and proof of date of original purchase 19 Panasonic Corporation of North America Panasonic Canada Inc Two Riverfront Plaza Newark NJ 07102 5490 5770 Ambler Drive 3 Mississauga Ontario http www panasonic com LAW 273 www panasonic com En Panasonic Corporation 2015 SQT0489 Printed in Malaysia F0115BMO
10. turn the knob anticlockwise until it stops and then turn it clockwise the muting will be canceled Remote control signal sensor Distance Within approx 7 m 23 ft directly in front Angle Approx 30 left and right Input selector knob Turn this knob clockwise or anticlockwise to switch the input source gt 13 Peak power meter Display the output level Input indicator gt 13 The indicator for the selected input source lights up e The indicator blinks if you select PC COAX1 COAX2 COAX3 or OPT when the device is not connected to this unit PHONO EARTH terminal PHONO EARTH gt 11 For connecting the ground wire of a record player Analog audio input terminal PHONO gt 11 For connecting a record player e MM cartridges are supported Attenuator ATTENUATOR If audio distortion occurs when using the analog audio input terminal LINE IN set this switch to ON Analog audio input terminal LINE IN gt 11 Speaker terminals SPEAKERS gt 9 AC IN terminal AC IN 12 Digital audio input terminal PC gt 15 For connecting to a PC etc Digital audio input terminal OPT IN gt 11 Digital audio input terminals COAX1 IN COAX2 IN COAX3 IN 10 11 System terminals CONTROL1 CONTROL2 gt 10 Product identification marking The model number is indicated Remote control AMP E aan
11. unit supports only the linear PCM LPCM signals listed below For details refer to the operating instructions of the connected device Input terminal Sampling frequency Number of quantization bits Coaxial digital input 32 44 1 48 88 2 96 176 4 192 kHz 16 24 bit Optical digital input 32 44 1 48 88 2 96 kHz 16 24 bit 11 12 AC power supply cord connection Connect only after all other connections are completed This unit rear ACIN Q i Insert the AC power supply cord up to a point just before the round hole AC power supply cord supplied To a household AC outlet L e This unit consumes a small amount of AC power 17 even the power switch lever is in the OFF position Remove the plug from the main electrical outlet if you will not be using the unit for an extended period of time Place the unit so the plug can be easily removed Measuring the characteristics of the amplifier and correcting its output To optimize the audio output you can measure the amplifier characteristics and correct its output when it is connected to the speakers Disconnect the headphones If you connect them during amplifier characteristic measurement or amplifier output correction it will be canceled Test tone emitted during measurement To ensure the measurement accuracy the speakers output a test tone at regular intervals For approximately 4 minutes It is not possible to change the vol
12. B Audio Class specification Connector Format support DSD control mode Channel Analog input Line input PHONO MM Digital input Optical digital input Coaxial digital input x3 Format support System port System control x2 L e Specifications are subject to change without notice Mass and dimensions are approximate AC 120 V 60 Hz 73 W Approx 0 3 W Approx 0 3 W 340 mmx 132 mmx325 mm 13 3 3 X5 7 32 X 12 13 16 Approx 8 3 kg 18 3 Ibs 0 C to 40 C 32 F to 104 F 35 to 80 RH no condensation 45 W 45 W 20 Hz to 20 kHz T H D 0 5 8 Q 20 kHz LPF 70 W 70 W 20 Hz to 20 kHz T H D 0 5 4 Q 20 kHz LPF 40 to 160 20 Hz to 20 kHz RIAA DEVIATION 1 dB 8 Q 20 Hz to 80 kHz 3 dB 8 Q 20 Hz to 90 kHz 3 dB 8 Q 200 mV 22 kQ 2 5 mV 47 KQ Stereo 26 3 mm 1 4 USB 2 0 high speed USB Audio Class 2 0 Asynchronous mode USB Standard B connector LPCM 32 44 1 48 88 2 96 176 4 192 kHz 16 24 32 bit DSD 2 8224 MHz 5 6448 MHz ASIO Native mode DoP mode DSD64 DSD128 playback 2 ch Pin jack Pin jack Optical terminal Pin jack LPCM 3 5 mm 1 s jack e Direct Stream Digital DSD and their logos are trademarks of Sony Corporation 18 Limited Warranty ONLY FOR U S A Technics Products Limited Warranty Limited Warranty Coverage For USA Only If your product does not work properly because of a defect in materials or workmanship
13. Technics Owner s Manual Stereo Integrated Amplifier SU C700 Music is borderless and timeless touching people s hearts across cultures and generations Each day the discovery of a truly emotive experience from an unencountered sound awaits Let us take you on your journey to rediscover music Rediscover Music Technics Thank you for purchasing this product Please read these instructions carefully before using this product and save this manual for future use If you have any questions visit U S A www panasonic com support Canada www panasonic ca english support Register online at www panasonic com register U S customers only E Features of this unit This unit offers the following features Full digital amplifier with a high precision jitter reduction circuit and PWM conversion circuit This unit is a full digital amplifier Its specially designed jitter reduction circuit and high precision PWM conversion circuit eliminate distortion noise and jitter LAPC Load Adaptive Phase Calibration Adaptive processing of speaker impedance flattens frequency amplitude and phase characteristics The result is the reproduction of sound with rich spatial expression High speed and lower noise linear power supply The combination of a large current Schottky barrier diode a rectifier circuit with a large storage capacitor and a stabilized power supply circuit achieves remarkably superior power supply that is both lo
14. cles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped NOOR WN o WARNING Unit e To reduce the risk of fire electric shock or product damage Do not expose this unit to rain moisture dripping or splashing Do not place objects filled with liquids such as vases on this unit Use only the recommended accessories Do not remove covers Do not repair this unit by yourself Refer servicing to qualified service personnel Do not place heavy items on this unit AC power supply cord e The power plug is the disconnecting device Install this unit so that the power plug can be unplugged from the socket outlet immediately CAUTION Unit e Do not place sources of naked flames such as lighted ca
15. e that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Any unauthorized changes or modifications to this equipment would void the user s authority to operate this device This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Declaration of Conformity Trade Name Technics Model No SU C700 Responsible Party Panasonic Corporation of North America Two Riverfront Plaza Newark NJ 07102 5490 Support Contact http Awww panasonic com contactinfo Technics SU C700 THE FOLLOWING APPLIES ONLY IN CANADA CAN ICES 3 B NMB 3 B Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union If you wi
16. ent After checking the connections measure the characteristics of the amplifier gt 13 e Check to see if the correct input source is selected Insert the plugs of the cables to be connected all the way in e Playback of multi channel content is not supported The digital audio input terminals of this unit can only detect linear PCM LPCM signals For details refer to the operating instructions of the connected device The remote control does not work properly e To avoid interference please do not put any objects in front of signal sensor gt 7 Change the remote control code if other products react to this remote control gt 14 Pressing DIMMER changes the display and the basic control switches brightness of the ST C700 SL C700 e DIMMER works for the ST C700 SL C700 as well as this unit Turn off the device that you want to maintain the brightness level of and press DIMMER The peak power meter does not operate e In the following cases this meter does not operate When a headphone plug is connected When the peak power meter light is turned off by pressing DIMMER When this unit is muted by pressing MUTE The system control function is not working e Use the system connection cables supplied with the ST C700 SL C700 e Connect the system connection cables to the system terminals CONTROL1 CONTROL2 Connect the ST C700 to CONTROL1 and the SL C700 to CONTROL2 e C
17. epaid adequately insured and packed well in a carton box When shipping Lithium lon batteries please visit our Web Site at www panasonic com BatteryHandling as Panasonic is committed to providing the most up to date information Include a letter detailing the complaint a return address and provide a daytime phone number where you can be reached A valid registered receipt is required under the Limited Warranty IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT PROOF OF PURCHASE INDICATING DATE OF PURCHASE AMOUNT PAID AND PLACE OF PURCHASE CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by the warrantor or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than a Factory Service Center o
18. ion of North America 661 Independence Pkwy Chesapeake VA 23320 PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY Shop i Accessories for all your Technics gear Go to www panasonic com accessories Get everything you need to get the most out of your Technics products Accessories amp Parts for your Camera Phone A V products TV Computers amp Networking Personal Care Home Appliances Headphones Batteries Backup Chargers amp more Customer Services Directory For Product Information Operating Assistance Parts Owner s Manuals Dealer and Service info go to www panasonic com support For the hearing or speech impaired TTY 1 877 833 8855 NX of As of October 2014 User memo DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER Limited Warranty ONLY FOR CANADA Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 TECHNICS PRODUCT LIMITED WARRANTY Panasonic Canada Inc warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by Panasonic
19. ndles on this unit e Do not put any objects on this unit This unit becomes hot while it is on Placement e To reduce the risk of fire electric shock or product damage Do not install or place this unit in a bookcase built in cabinet or in another confined space Ensure this unit is well ventilated Do not obstruct this unit s ventilation openings with newspapers tablecloths curtains and similar items e Keep your speakers at least 10 mm 13 32 away from the system for proper ventilation e Do not lift or carry this unit by holding any of its knobs or levers Doing so may cause this unit to fall resulting in personal injury or malfunction of this unit Battery e Danger of explosion if battery is incorrectly replaced Replace only with the type recommended by the manufacturer e Mishandling of batteries can cause electrolyte leakage and may cause a fire Remove the battery if you do not intend to use the remote control for a long period of time Store in a cool dark place Do not heat or expose to flame Do not leave the battery ies in a car exposed to direct sunlight for a long period of time with doors and windows closed Do not take apart or short circuit Do not recharge alkaline or manganese batteries Do not use batteries if the covering has been peeled off Do not mix old and new batteries or different types at the same time e When disposing of the batteries please contact your local authori
20. o input COAX1 IN oe e ST C700 e Digital audio input COAX2 IN ela e SL C700 COAX3 Digital audio input COAX3 IN OPT Digital audio input OPT IN 3 Operate the device to be used for playback 4 Press VOL to adjust the volume 13 14 Auto off function This unit is designed to conserve its power consumption and save energy The unit will turn to standby mode automatically if there is no sound and it is not being used for approximately 20 minutes e The factory default is On To cancel this function 1 Press and hold MUTE until the PHONO indicator on this unit starts to blink 2 Press MUTE Each time you press the button COAXS3 indicator blinks On OPT indicator blinks Off 3 Press VOL to exit L e You will exit the auto off setup mode if you do not operate any buttons and controls for approximately 10 seconds after any of the three indicators above starts blinking Remote control code When other equipment responds to the supplied remote control change the remote control code e The factory default is 1 Point the remote control at this unit and press and hold OK and the numeric button for at least 4 seconds When the code is changed the PC indicator and the COAXz2 indicator blink for approximately 10 seconds OK 1 Set the code to 1 OK 2 Set the code to 2 LI e When the ST C700 SL C700 is connected via the
21. onnect coaxial digital cables to the digital audio input terminals COAX1 IN COAX2 IN Connect the ST C700 to COAX1 IN and the SL C700 to COAX2 IN The unit turns off automatically Is the auto off function turned on gt 14 e f the ST C700 is connected to this unit via the system control function this unit may automatically enter standby mode when the ST C700 enters standby mode 10 14 This unit incorporates a protection circuit to prevent damage caused by heat buildup When you use this unit at a high volume level for a long period of time it may turn off automatically Wait for this unit to cool down before turning on this unit again For approximately 3 minutes Input indicator blinks In the following cases the input indicator blinks When this unit is muted by pressing MUTE PC COAX1 COAX2 COAX3 or OPT is selected but no device is connected Audio signals such as sampling frequency components are not input correctly Specifications E GENERAL Power supply Power consumption Power consumption in standby mode Power consumption in off mode Dimensions WxHxD Mass Weight Operating temperature range Operating humidity range E AMPLIFIER SECTION FTC output power Load impedance Frequency response PHONO MM LINE COAX1 2 3 Input sensitivity Input impedance LINE PHONO MM E TERMINALS SECTION Headphones jack USB port USB Standard US
22. r other Authorized Servicer or damage that is attributable to acts of God The model number and serial number of this product can be found on either the back or the bottom of the unit Please note them in the space provided below and keep for future reference MODEL NUMBER SU C700 SERIAL NUMBER THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY As examples this excludes damages for lost time travel to and from the servicer loss of or damage to media or images data or other memory or recorded content The items listed are not exclusive but for illustration only ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If a problem with this product develops during or after the warranty period you may contact your dealer or Service Center If the problem is not handled to your satisfaction then write to Consumer Affairs Department Panasonic Corporat
23. sh to discard this product please contact your local HE authorities or dealer and ask for the correct method of disposal Table of contents IMPORTANT SAFETY INSTRUCTIONS ccccseeeesereeeeee 5 Listening to audio from a PC eCtc ceccccssseseeeenseeees 15 A CCOSSOMNCS ira aaaea aada ieaiaia en 6 Troubleshooting c cecseeececeeeeeeeeeeeeeseeeeeeeeeseeeeeeeenseeee 16 UG CONG a E E E A E 6 SPECIFICATIONS wickets anes ccsencecceccdennnsecenaannnd ances anneetsceensensesestes 17 Control reference guide c eccceeseeeeceeeeeeeeeeeeeeeeeeees 7 Limited Warranty ONLY FOR U S A ccccssesssernseeeees 18 Getting started ance ccciccnsccecetsensecscetcnnne cecescnssceceeseanseeeceseauseeees 9 Limited Warranty ONLY FOR CANADA 2 00 19 ODE FATIONS Sasecevsectovees tate eviliivesivarseasedeaed anirua 13 About descriptions in this Owner s Manual e Pages to be referred to are indicated as gt OO e The illustrations shown may differ from your unit Unless otherwise indicated operations are described using the remote control Accessories 1 AC power supply cord 1 Remote control 2 Batteries for remote control K2CB2YY00098 N2QAYA000096 omm ii o ONLY FOR CANADA The enclosed Canadian French label sheet corresponds to the English display on the unit L e Product numbers provided in this Owner s Manual are correct
24. system control function change its remote control code as well as the remote control code for this unit Using the system control function You can automatically link this unit with the ST C700 SL C700 and operate them easily with the remote control Preparation Connect this unit and the ST C700 SL C700 with system connection cables and coaxial digital cables gt 10 Set the power switch lever of this unit and the ST C700 SL C700 to the I position E Switching this unit and the ST C700 SL C700 to on standby simultaneously e f you point the remote control at this unit and press AMP when this unit and the ST C700 SL C700 are in standby mode this unit and the device of the selected input source will be turned on simultaneously e f you point the remote control at this unit and press AMP when this unit and the ST C700 SL C700 are turned on this unit and the ST C700 SL C700 will simultaneously enter standby mode E Switching this unit s input source automatically When you perform an operation such as playback on the ST C700 SL C700 the input source of this unit will be automatically switched to COAX1 COAX2 L e For information on the operations of the ST C700 SL C700 please also refer to their operating instructions e f you install the dedicated app Technics Music App free of charge on your tablet smartphone you can use a wide variety of functions when the unit and the
25. ties or dealer and ask for the correct method of disposal CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Conforms to UL STD 60065 Certified to CAN CSA STD C22 2 No 60065 Product Identification Marking is located on the rear panel of the unit THE FOLLOWING APPLIES ONLY IN THE U S A FCC Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarante
26. ume of the audio being output while the measurement is in progress 1 Raise the power switch lever of this unit to the I position 2 Press and hold LAPC until the LAPC indicator on this unit starts to blink e This unit will start measuring the characteristics of the amplifier Check that a test tone is output from both the left and right speakers If you press LAPC while the measurement is in progress it will be canceled The LAPC indicator on this unit will go off e When the measurement is complete amplifier output correction will be automatically turned on The LAPC indicator on this unit will light up E Turning on off the output correction function Press LAPC Each time you press the button LAPC indicator lights up On LAPC indicator goes off Off LEI Depending on the type of the connected speakers the effect of the output correction function may be minimal e The corrected output remains in effect until you measure the characteristics again When you use other speakers redo the measurement Operations e Reduce the volume to minimum 1 Raise the power switch lever of this unit to the C I position 2 Press gt INPUT lt below AMP to select the input source The indicator of the selected input source will light up PHONO Analog audio input PHONO LINE Analog audio input LINE IN PC Digital audio input PC gt 15 e Digital audi
27. urant or other business or rental use of the product or service by anyone other than an Authorized Servicer or damage that is attributable to acts of God Dry cell batteries are also excluded from coverage under this warranty THIS EXPRESS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN NO EVENT WILL PANASONIC CANADA INC BE LIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY As examples this warranty excludes damages for lost time travel to and from the Authorized Servicer loss of or damage to media or images data or other memory or recorded content This list of items is not exhaustive but for illustration only In certain instances some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or the exclusion of implied warranties so the above limitations and exclusions may not be applicable This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory WARRANTY SERVICE For product operation repairs and information assistance please visit our Support page on www panasonic ca english support IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid adequately insured and preferably in the
28. w noise and plentiful E Recommended devices We recommend using Technics devices optional for superior audio quality Product name Model number Network Audio Player ST C700 Compact Disc Player SL C700 Speaker System SB C700 This product is set to be released in July 2015 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit Follow the safety instructions on the unit and the applicable safety instructions listed below Keep these operating instructions handy for future reference 1 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience recepta
Download Pdf Manuals
Related Search