Smeg AS 73 CS User's Manual
Contents
1. synthetic laundry such as shirts blouses aee rian blended laundry etc Do not dry curtains and lace in your machine 13 Anti creasing A 2 hour anti creasing programme to prevent laundry from creasing will be activated if you do not take the laundry out after the programme is over This programme rotates the laundry in 10 minute intervals to prevent creasing Special programmes For special cases there are also extra Epo ines available Additional programmes may differ aa to the model of your machine int You can use this programme to dry the cottons that are spun at high speeds in your washing machine It can dry your 1 2 kg Cotton laundry 8 Shirts 3 T Shirts within 30 minutes E In order to obtain better results from the dryer programs your laundry must be washed with suitable program and spun at the recommended spin speeds in your washing machine Shirt Dries the shirts in a more sensitive way so that they are less creased and ironed easily E Shirts may contain little amount of dampness at the and of the program It is advised not to leave the shirts in the dryer Jeans You can use this program to dry the jeans that are spun at high speeds in your washing machine CH Review the relevant part of the program table Delicates You can dry at a lower temperature your very delicate laundry silk blouses fine underwear etc that are suitable for drying or laundry which is advised to2. Fabric softeners or similar products should be used as specified by the fabric softener instructions Underwear that contains metal reinforcements should not be placed in a dryer Damage to the dryer can result if metal reinforcements come loose during drying Check all garments for forgotten lighters coins metal pieces needles etc before loading At times when your dryer is not in use or after the laundry is taken out following the completion of drying process turn off by using the On Off button In cases when the On Off button is on while the dryer is energized keep the door of the dryer closed Intended use This product has been designed for domestic use It should not be used for other purposes Use the product only for drying laundry that are marked accordingly Dry only those articles in your product that are stated in this manual This product is not intended to be used by persons with physical sensory or mental disorders or unlearned or inexperienced people including children unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product Children s safety Electrical appliances are dangerous for the children Keep children away from the machine when it is operating Do not let them tamper with the machine Packaging materials are dangerous to children Keep the packaging materials out of reach of children or dispose them b
3. alcohol fuel oil kerosene stain remover turpentine paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer Garments or pillows bolstered with rubber foam latex foam shower bonnets water resistant textiles materials with rubber reinforcement and rubber foam pads should not be dried in the dryer Do not use fabric softeners and anti static products unless they are recommended by the manufacturers of the fabric softener or the product This product must be grounded Grounding installation decreases the risk of electric shock by opening a path with low resistance for the electricity flow in case of a malfunction or failure Power cable of this product is equipped with a conductor and a grounding plug that allows for grounding the product This plug must be installed appropriately and inserted into a socket which is grounded in accordance with the local laws and regulations Do not install the product behind a door with a lock sliding door or a door that has a hinge against the hinge of the dryer Do not install or leave this product in places where it will be exposed to outdoor conditions Do not tamper with the controls Do not perform any repair or part replacing procedures on the product even if you know or have the ability to perform unless it is clearly suggested in the operating instructions or the published service manual Inside and exhaust duct o
4. and all buttons except the On Off button on the control panel are deactivated when the child proof lock is active Press the Start Pause Cancel and Cancel audio warning buttons simultaneously for 3 seconds to activate the child press lock any direction to end the programme while To start a new programme after the the machine is running Water tank and filter cleaning warning lights turn on to warn the user when the programme is cancelled by pressing the Start Pause Cancel button for 3 seconds However the warning lights do not turn on when the programme is cancelled by turning the programme selection knob Only the drying light turns on and the machine remains in hold until a new programme is selected and the Start Pause Cancel button is pressed Child proof lock of the machine should not be active in order to perform these two operations If the child proof lock is active deactivate it before performing these operations Adding removing laundry in standby mode In order to add or remove laundry after the programme starts 1 Press the Start Pause Cancel button to switch the dryer to Pause mode Drying process will stop 2 Open the door at Pause position and close it again after adding or taking out laundry 3 Press Start Pause Cancel button to start the programme Any laundry added after the drying process has started may cause the dried clothes in the machine i
5. next step Ready to wear Starts to illuminate when the drying degree reaches Ready to wear step and remains illuminated until the next step Final Anti creasing Illuminates when the program comes to an end and anti creasing function is activated E If more than one LED light up or flash concurrently it means there is malfunctioning or a failure please see Solution suggestions for problems 15 EN Changing the programme after it has started You can use this feature to dry your clothes under higher or lower temperatures after your dryer has started For example 1 Press and hold the Start Pause Cancel button for about 3 seconds to Cancel the programme in order to select Extra Dry programme instead of Iron Dry programme 2 Select the Extra Dry programme by rotating the programme selection button 3 Press Start Pause Cancel button to start the programme E Press Start Pause Cancel button for 3 seconds to cancel the programme or turn the programme selection knob in process but this process will extend the programme duration and increase energy consumption since the drying will be interrupted continuously Therefore it is recommended to add laundry before the drying programme has started Child proof lock There is a child proof lock to prevent any programme interruption due to the pressing of button while the programme is running The loading door
6. or once a month To clean the condenser 1 If a drying process has been carried out open the door of the product and wait until it cools down 2 Unlock the 4 condenser locks after opening the kick plate 3 Pull out the condenser 4 Clean the condenser with pressurized water and wait until the water drains 5 Replace the condenser with the side of it labelled with Top facing upwards Lock the 4 condenser locks Make sure that the red lock on the upper right corner is engaged securely 6 Close the kick plate cover Close properly and check the locking latchs ad O a 19 EN 6 Solution suggestions for problems Drying process takes too much time e Meshes of the filter may be clogged Wash with water Laundry come out wet at the end of drying e Meshes of the filter may be clogged Wash with water e Excessive laundry might have been loaded in Do not overload the machine Machine does not switch on or the program does not start Machine is not activated when set e It might have not been plugged in Make sure that the machine is plugged in e The loading door may be ajar Make sure that the loading door is properly closed e Program might have not been set or the Start Pause Cancel button might have not been pressed Make sure that the program has been set and it is not in Pause mode e Childproof lock might have been activated Deactivate the childproof l
7. programme has started Press Start Pause Cancel button of the machine to start the programme Programme selection Decide the appropriate programme from the table below which includes drying temperatures in degrees Select the desired programme with the programme selection button Dry at high temperature only for cotton laundry Thick and multi layered laundry E g towels linens jeans are dried in a way that they do not require ironing before placing in the wardrobe Normal laundry E g tablecloths underwear are dried in a way that they do not require ironing before placing in the drawers Ready to wear Normal laundry E g tablecloths underwear are dried in a way that they do not require ironing before placing in the drawers but more than those in the ready to wearoption Ready to wearPlus Normal laundry E g Shirts dresses are dried ready to be ironed E For further program details see Program Selection Table Main programmes Depending on the type of laundry the following main programmes are available Cottons You can dry your durable laundry with this programme Dries at high temperature It is recommended to use for your cotton items Such as bed sheets quilt cover underclothing etc Synthetics You can dry your less durable laundry with this programme It dries at a lower temperature compared to the cottons programme It is recommended for your
8. the same button is pressed again 6 hours and if pressed once more 9 hours delay will be selected If the time programming button is pressed one more time time delaying function will be cancelled Set the time delay as you require 4 Delayed operation of the selected program is started by pressing the Start Pause Cancel button after selecting the time delay E Additional laundry may be loaded taken out during the time delay period E During the time delay period laundry is rotated for 4 seconds in every 10 minutes to prevent creasing Canceling the time delay If you want to cancel the time delay countdown and start the program 1 Press Start Pause Cancel button for about 3 seconds 2 Press Start Pause Cancel button to start the program right away Starting the programme 1 Press Start Pause Cancel button to start the programme 2 Light of the Start Pause Cancel button will turn on to indicate that the programme has started Progress of program Progress of a running program is shown through the program follow up indicator At the beginning of every program step the relevant indicator LED will light up and light of the completed step will turn off Drying level will be illuminated during the whole drying process until the drying degree reaches iron dry Iron Dry Starts to illuminate when the drying degree reaches iron dry step and remains illuminated until the
9. be hand washed eVentilation Only ventilation is performed for 10 minutes without blowing hot air You can air your clothes that have been kept at closed environments for a long time thanks to this program to deodorize unpleasant odors eTimer programs You can select one of the 10 min 20 min 40 min and 60 min timer programmes to achieve the desired final drying level at low temperatures Programme dries at the selected time regardless of the drying temperature EN Program selection and consumption table Spin speediin T Drying time Programs Capacity kg washing machine RA tying remaining minutes rpm ae humidity Cottons Coloreds Ready to Wear 3 5 Ready to Wear Ready to Iron Synthetics coo mo e o a o Ready to Wear sw o aw o Delicates D st Energy consumption values fi A Approximate Spin speed in CACT Energy Capacity kg washing machine fe consumption remaining rpm humidity value kWh Energy Label standard program EN 61121 2005 All values given in the table have been fixed according to EN 61121 2005 Standard These values may deviate from the table according to the laundry type laundry spin speed environmental conditions and voltage fluctuations 14 EN Auxiliary function Cancel audio warning Your dryer will give an audio warning when the programme comes to an end If you do not want to hear the audio warning p
10. ctivated in order to change the drying programme To cancel any selected programme Press Start Pause Cancel button for about 3 seconds The Filter cleaning Water tank and End Anti creasing warning lights will turn on at the end of this period for reminding purposes A As the inside of the dryer will be excessively hot when you cancel the programme while the dryer is running activate the ventilation programme to cool it down Technical Specification EN ight adjustable idth Depth Capacity max eight net oltage Rated power input Model code Type label is located behind the loading door End of programme The End Anti creasing Filter cleaning and Water tank warning lights on the programme follow up indicator will turn on when the programme comes to an end The door can be opened and the machine becomes ready for a second cycle Press On Off button to turn off the dryer Final step of the drying cycle cooling step is performed without heat application in order to keep the items at a temperature that would not harm them EA 2 hour anti creasing programme to prevent laundry from creasing will be activated if you do not take the laundry out after the programme has come to an end If you will not take the laundry out immediately do not stop the dryer before the drying process is complete Clean the filter after each drying please see Filter cleanin
11. cts equipped with a condenser The moisture in the damp laundry is taken from the laundry and condensed Drain the water tank after each drying cycle or during drying when Water tank warning light turns on You can use the water in the water tank in your steam irons or air humidifiers Z Condensed water is not drinkable Never take out the water tank when the programme is running Water tank may be located in two different places as indicated below depending on the model of your dryer Inside the drawer on the panel Behind the kick plate cover If you forget to drain the water tank your dryer will stop during the following drying cycles when the water tank is full and the Water tank warning light will turn on If this is the case press the Start Pause Cancel button to resume the drying cycle after draining the water tank To drain the water tank 1 Carefully remove the water tank by opening the kick plate cover pulling the drawer 2 Drain the water by opening the water tank cover 3 If there is lint accumulation in the water tank cover clean it and press to close 4 Place the water tank into its seat 18 EN For the condenser products with a condenser Hot and humid air in the condenser is cooled with the cold air from the room Thus the humid air circulating in your dryer is condensed and then pumped into the tank Clean the condenser after every 15 drying cycles
12. d not be connected to the chimney of a stove or a fireplace Do not operate your product at the same time with heaters such as a coal or gas stove Airflow may cause the chimney to flare up Connection to water drain Products with a condenser In products equipped with condenser unit water accumulated during the drying cycle accumulates in the water tank You should drain accumulated water after each drying cycle You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank Connecting the water drain hose 1 Pull the hose out by its end to remove it from the product Do not use any tools to remove the hose Attach the drain hose adaptor to the end of this hose Connect the special drain hose supplied with the product to the hose adaptor fitting Connect the other end of the drain hose directly to the wastewater drain or to the washbasin The fitting must always be secured in every type of connection Your house may flood if the hose comes out of its housing during water discharge When you direct the water drain to outside Water Tank warning light will turn on at the end of each programme N oO Important e The hose should be attached to a height of maximum 80 cm e Make sure that the hose is not pinched or bend e The end of the hose should not be bent i
13. d sheets quilt any part of them n covers large tablecloths may bunch e Fabric softeners and similar products up Stop the dryer 1 2 times during must be used in accordance with the drying process to separate bunched up instructions of the manufacturer of the laundry relevant products All laundry must be spun at the highest spin speed that your washing machine allows for the laundry type Laundry may be tangled after washing Separate your laundry before placing them into your dryer Sort your laundry according to their types and thicknesses Dry the same type of laundry together E g fine kitchen towels and table cloths dry faster than the thick bath towels 10 EN Following weights are given as examples Approximate weights g Home articles Cotton quit covers double 1869 Cotton quit covers single 1000 Bed sheets double 500 Bed sheets single 350 Large tablecloths 700 Small tablecloths 250 Tea napkins 100 Bath towels 700 Hand towels 350 Approximate weights g Blouses 150 Cotton shirts 300 Shirts 200 Cotton dresses 500 Dresses 350 Jeans 700 Handkerchiefs 10 pieces 100 T Shirts 125 Garments Loading e Open the loading door e Place laundry items loosely into the dryer e Push the loading door to close Ensure that no items are caught in the door 11 EN Ef selecting a Programme and Operating Your Machine Control pa
14. ess SMeg AS 73 CS Read this manual prior to initial operation of the product Dear Customer We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you very good results We advise you to read through this manual carefully before using your product and keep it for future reference This User Manual will e Help you use your machine in a fast and safe way e Read the User Manual before installing and starting your product e In particular follow the instructions related to safety e Keep this User Manual within easy reach for future reference e Please read all additional documents supplied with your product Remember that this User Manual is also applicable for several other models Explanation of symbols Throughout this User Manual the following symbols are used A Important safety information Warning for hazardous situations with regard to life and property A Caution Warning for supply voltage A Caution Warning for fire hazard A Caution Warning for hot surfaces Read the instructions i Useful information Important information or useful hints about usage This appliance s packaging material is recyclable Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose Your appliance also contains a great amount of recyclable material It is marked with this label to indica
15. f the product must be cleaned by the qualified service personnel periodically Wrong connection of grounding conductor of the product can cause electric shock If you have any suspect about the grounding connection have it checked by a qualified electrician service representative or service personnel Do not reach into the machine when the drum is spinning Unplug the machine when it is not in use Never wash down the appliance with water There is the risk of electric shock Always disconnect by unplugging from the mains before cleaning Never touch the plug with wet hands Never unplug by pulling on the cable always pull out by grabbing the plug only Do not operate the machine if the power cable or plug is damaged Never attempt to repair the machine yourself otherwise you will be putting your life and others lives in danger For malfunctions that cannot be solved by following the information given in the safety instructions Turn off the machine turn off and contact an authorised service agent Do not stop the dryer before the drying cycle comes to an end unless you will remove all laundry from the dryer fast in order to lay them and dissipate the heat Remove the door of the drying compartment before decommissioning or disposing of the product The final step of the drying cycle cool down cycle occurs without applying heat to ensure that the items are left at a temperature that will not damage them 4 EN
16. g G Drain the water tank after each drying please see Water tank 38 kg See type label 17 EN Maintenance and cleaning Cover filter Lint and fibres released from the laundry to the air during the drying cycle are collected in the Cover Filter m ma Such fibre and lint are generally formed during wearing and washing Always clean the filter after each drying process E You can clean the filter and filter area by vacuum cleaner To clean the filter 1 Open the loading door 2 Remove the cover filter by pulling it up and open the filter 3 Clean lint fibre and cotton raveling by hand or with a soft piece of cloth 4 Close the filter and place it back into its seat Clogging may arise on the filter surface after using your machine for some time if this occurs wash the filter with water and dry it before using again Sensor models with a sensor There are humidity sensors in your dryer that detect whether the laundry is dry or not To clean the sensor 1 Open the loading door of the dryer 2 Allow the machine to cool down if drying has been carried out 3 Wipe the metal sensors with a soft cloth dampened with vinegar and dry them fi Clean metal sensors 4 times a year Never use solvents cleaning agents or similar substances when cleaning since these materials can cause fire and explosion Water tank Produ
17. ke sure that its location and power supply installations are appropriate If they are not calla qualified electrician to have any necessary arrangements carried out Make sure that the power connections of the product are in accordance with the instructions given in relevant chapters of this manual Disposing of packaging mate rial Packaging materials are dangerous to children Keep packaging materials in a safe place out of reach of children Packaging materials of your product are manufactured from recyclable materials Sort and dispose of them in accordance with recycled waste instructions Do not dispose of them with normal domestic waste 7 EN Transportation of the machine 1 Unplug the machine from the mains 2 Remove the water drain if any and chimney connections 3 Drain water remained in the machine completely before transportation Disposing of the old machine Dispose of your old machine in an environmentally friendly manner Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your machine Before disposing of your old machine cut off the power cable plug and make the loading door lock unusable to avoid dangerous conditions to children E Initial preparations for drying Normal temperature rying Things to be done for energy saving e Make sure that you operate the product at its full capacity but pay attention to not exceeding it e Spin y
18. nel att OG 1 Filter cleaning warning light Warning light turns on when the filter is full 2 Program follow up indicator Used to follow up the progress of the current programme 3 Cancel audio warning Used to cancel the audio warning given at the end of the programme 4 On Off button Used to turn on and off the machine 5 Programme selection knob Used to select a programme 6 Start Pause Cancel button Used to start pause or cancel the programme 7 Water tank warning light Warning light turns on when the water tank is full 8 Time delay selection button Used to set the time delay It may change according to the specifications of your dryer lt 7 AD 9 N aS FA O 1 Extra Cottons End Anti Synthetics Delicates Ventilation creasing Ready to Jeans Shirt iron Extra Ready to Wear Ready to Wear ik A OO gt u me plus paag On Off Start Pause Cancel Low Cancel temparature Audio li Warning Spin 12 1 Timer follow up indicator Filter cleaning Ready to Wear Plus Tank full Child proof lock EN Preparing the machine 1 Plug in your machine 2 Place the laundry in the machine 3 Press the On Off button CD Pressing the On Off button does not necessarily mean that the
19. ntermingle with wet clothes and the result will be wet laundry after the drying process is over E Laundry may be added or taken out as much as desired during a drying programme is over or to interrupt the programme the child proof lock should be deactivated Press the same buttons for 3 sec again to deactivate the child proof lock G Child proof lock is deactivated when the machine is restarted by pressing the On fi Press the relevant buttons for 3 seconds to activate the child proof lock A long beep will be heard and the child proof lock will be activated A double beep will be heard if you press any button or turn the programme selection knob while the child proof lock is active Press the buttons for 3 seconds to deactivate the child proof lock Single beep will be heard and child proof lock will be deactivated 16 EN A A double beep will be heard if you turn the programme selection knob when the machine is running and the child proof lock is active If you deactivate the child proof lock without returning the program selection knob to its previous position the programme will be terminated since the position of the programme selection knob is changed The drying light turns on and the machine remains on hold until a new programme is selected and the Start Pause Cancel button is pressed Finishing by canceling the programme A new programme can be selected and started after Programme cancel is a
20. nual prevent your machine from slipping on wet and slippery surfaces To install the plastic parts 1 Tilt your product to backwards 2 Fit the plastic parts on to the front adjustable feet Press on the plastic parts to snap them into their seating 3 Check the balance of your product again and readjust the adjustable feet if necessary Electrical connection Connect the machine to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table Our company shall not be liable for any damages that will arise when the machine is used on a circuit without grounding e Connection must comply with national regulations If the current value of the fuse or breaker in the house is less than 16 Amps have a qualified electrician install a 16 Amp fuse Power cable plug must be within easy reach after installation The voltage and allowed fuse or breaker protection are specified in the Technical Specifications section The specified voltage must be equal to your mains voltage Do not make connections via extension cables or multi plugs The main fuse and switches must have a contact distance of minimum 3 mm ZA Damaged power cable must only be replaced by a qualified electrician If the product is faulty it must not be operated unless it is repaired There is the risk of electric shock First use To have the product ready for operation before calling the authorised service agent ma
21. ock e The condenser cover on the models with a condenser might not be closed securely Make sure that the condenser cover and the red lock is closed securely Program has been interrupted without any cause e The loading door may be ajar Make sure that the loading door is properly closed e Electricity may be cut off Press Start Pause Cancel button to start the program e The condenser cover on the models with a condenser might not be closed securely Make sure that the condenser cover and the red lock is closed securely Laundry has shrunk become felted or deteriorated e A program suitable for the laundry type might have not been used Dry only the laundry which is suitable for drying in your machine after checking the labels on your clothes e Select a program with suitable low temperature for the laundry type to dry your clothes Drum lightning does not come on for models equipped with a lamp e The machine might have not been started by using the On Off button Make sure that the machine is On e Bulb may have blown Call the authorized service to replace the bulb e The condenser cover on the models with a condenser might not be closed securely Make sure that the condenser cover and the red lock is closed securely 2 beeps heard when the buttons are pressed or the program selection knob is turned e Childproof lock might have been activated Deactivate the childproof lock e Program selection knob migh
22. our laundry at the highest speed possible when washing them Thus the drying time is shortened and energy consumption is decreased e Pay attention to dry same types of laundry together e Follow the instructions in the user manual for programme selection e Make sure that sufficient clearance is provided at the front and rear side of the dryer for air circulation Do not block the grill at the front side of the product e Do not open the door of the machine during drying unless necessary If you must certainly open the door pay attention not to keep it open for a long time e Do not add new wet laundry during drying e Lint and fibres released from the laundry to the air during the drying cycle are collected in the Lint Filter Make sure that you clean the filters before or after each drying e In models with condenser make sure that you clean the condenser regularly at least once every month or after every 15 drying cycles e In vented models follow the chimney connection rules in the user manual and pay attention to the chimney cleaning e Ventilate the room where the dryer is located well during drying e For power saving in models with lamps at times when your dryer is not in use keep the door closed if the On Off button is pressed if the dryer is energizeq Laundry suitable for drying in the machine g Always follow the suggestions on the laundry labels Dry only the laundry having a label
23. rect load capacity Do not dry items cleaned with industrial chemicals in the dryer Do not dry your unwashed laundry in the dryer Items soiled with cooking oils acetone alcohol fuel oil kerosene stain remover turpentine paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer Garments or pillows bolstered with rubber foam latex foam shower bonnets water resistant textiles materials with rubber reinforcement and rubber foam pads should not be dried in the dryer Do not use fabric softeners and anti static products unless they are recommended by the manufacturers of Programme Selection Table Always the fabric softener or the product start the programme in accordance with e Do not dry the underwear reinforced the maximum load capacity with metal parts in the dryer If these Adding laundry to the machine more metal reinforcements loosen and break than the level shown in the figure is not during drying they will damage your recommended Drying performance dryer will degrade when the machine is Preparing laundry for drying overloaded Furthermore your dryer e Check all laundry items before loading and your laundry can be damaged them into the product to make sure that Place your laundry into the drum loosely there are no lighters coins metal items so that they will not get tangled needles and etc in their pockets or on Large pieces E g be
24. ress Cancel Audio Warning button The relevant light will turn on when this button is pressed and an audio warning will not be given when the programme comes to an end E You can select this function either before or after the programme starts Warning indicators G Warning indicators may differ accord ing to the model of your dryer Filter cleaning A warning light will turn on to remind filter cleaning after the programme finishes If the filter cleaning warning light lights up continuously please refer to Suggested solutions for problems Water tank Warning light starts flashing when the tank is filled with water The dryer stops operating if the warning light turns on when a programme is running Drain the water in the water tank to restart the dryer Press Start Pause Cancel button to start the programme after you have emptied the water tank The warning light turns off and the programme resumes operating Time delay If you wish to dry your clothes at a later time thanks to the time delay function you can delay the program start up to 3 hours 6 hours or 9 hours 1 Open the loading door and put the laundry in E Make sure that all air outlets are open door filter is cleaned and the water tank is empty 2 Set the drying program and if required the auxiliary functions 3 When the time programming button is pressed once a 3 hour delay is selected and the relevant led lights When
25. stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme p not Suitable fi See Or with drier tem perature drier Drying Dry ona Hang without hanger spinning Can be ironed Can be with hot iron ironed with warm iron trey Do not iron Laundry unsuitable for drying in the machine e Laundry items with metal attachments such as belt buckles and metal buttons can damage your dryer e Do not dry items such as woollens silk garments and nylon stockings delicate embroidered fabrics laundry with metal accessories and items such as sleeping bags in the dryer e Laundry made of delicate and valuable fabrics as well as lace curtains can be creased Do not dry them in the dryer e Do not dry items made of hermetic fibres such as pillows and quilts in the dryer e Laundry made of foam or rubber will be deformed Do not dry laundry containing rubber in the dryer Do not dry laundry exposed to petroleum oil combustible or explosive agents in the dryer even if they are washed beforehand Overly wet laundry or laundry with dripping water must not be put into the dryer Items cleaned or washed with gasoil fuel oil dry laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor Cor
26. t be turned to an undefined position Select one of the defined programs Filter cleaning light is flashing e Filter might have not been cleaned Clean the cover filter Final Anti creasing LED is on e Program has come to an end Turn off the machine and take out the laundry 3 beeps are heard when you press the Start Pause Cancel button e The loading door may be ajar Make sure that the machine is plugged in e Make sure that the condenser cover and the red lock is closed securely Also for products equipped with a condenser Water tank warning LED is flashing e Water may be full e Drain the water in the water tank A Call an authorized service agent if the problem persists 20 EN
27. t should not be stepped on and it must not be folded between the drain and the product Connecting the water drain hose for models with the water tank at the bottom Connection pipe to water drain is at the bottom rear of your machine 1 Remove the bracket and the rubber cap 2 Attach the drain hose and replace the bracket to its position I Important There is no pump in the machine so ensure that the hose is placed to allow a easy water flow 6 EN The end of the hose should never be higher than the level of the water outlet on the machine Otherwise the tank full light of your machine will illuminate and stop the programme If the dryer is mounted on the washing machine by means of a bracket use of the water drain hose is recommended The drain hose should be directed downwards as shown in the figure Adjusting feet In order to ensure that your product operates more silently and vibration free it must stand level and balanced on its feet Front feet of your product can be adjusted Balance the machine by adjusting the feet 1 Loosen the feet by hand 2 Adjust the feet until the product stands level and firmly on the floor Do not use any tools to loosen the adjustable feet otherwise they can be damaged Never remove the adjustable feet from their housings 2 plastic pieces supplied along with the user ma
28. te the used appliances that should not be mixed with other waste This way the appliance recycling organised by your manufacturer will be done under the best possible conditions in compliance with European Directive 2002 96 EC on Waste Electrical and Electronic Equipment Contact your town hall or your retailer for the used appliance collection points closest to your home We thank you doing your part to protect the environment 2960310281_EN 171209 1721 1 Important safety information This section includes safety information that e will help protection from risks of personal injuries or materialistic damages Failure to follow these instructions shall cause any warranty and reliability commitment to become void General safety Never place the machine on a carpet covered floor otherwise lack of airflow beneath the machine may cause electrical parts to overheat This will cause problems with your machine If the power cable or mains plug is damaged you must call Authorised Service Agent for repair The product should not be plugged in during installation maintenance and repair works Such works should always be made by the technical service Manufacturer shall not be held responsible for damages arising from processes carried out by unauthorised persons Connect the product to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table Operate your product at tempera
29. tures between 5 C and 35 C Do not use electrical devices in the product to the chimney holes which are used for the exhaust fumes of the devices operating with gas or other types of fuel You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect Always clean the lint filter before or after each loading Never operate your dryer without the lint filter installed Do not allow fibre dust and dirt accumulation around the exhaust exit and at adjacent areas Do not connect the air exit of the product Power cable plug must be within easy reach after installation Do not use extension cords multi plugs or adaptors to connect the dryer to power supply in order to decrease the risk of electric shock Do not make any changes on the plug supplied with the product If it is not compatible with the socket have a qualified electrician change the socket with a suitable one Items cleaned or washed with gasoil fuel oil dry laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor Do not dry items cleaned with industrial chemicals in the dryer Do not dry unwashed items in the dryer Items soiled with cooking oils acetone
30. uch anywhere tap socket etc and also pay attention to install the product at a place where it will stay permanently Do not place the product on top of the power cable e Keep at least 1 5 cm distance to walls of other furniture on for products equipped with an outlet vent Ventilation hose allows exhaust air from inside the machine Vented dryer has 1 air outlet Stainless sheet metal or aluminum pipes can be used instead of a hose The pipe diameter should be minimum 10 cm Maximum hose and pipe lengths are given in the table below Maximum length 1 elbow 45 1 elbow 90 1 elbow 90 short 1 wall passage Each elbow and other passages should be subtracted from the maximum length stated above To connect a ventilation hose 1 Connect the air outlet hose to the hose spacer piece by turning it counterclockwise 2 Make the hose passages as shown below Exhaust of humid air from the dryer into the room is inconvenient It may damage the walls and furniture in the room The ventilation hose can be routed outdoors via a window or it can be connected to the air outlet in the bathroom Air outlet hose must be routed directly to the outdoors There must be a limited number of elbows as not to hinder ventilation To prevent water accumulation in the hose make sure that it is not folded on the floor ES VITTE 2 z l f A The ventilation hose shoul
31. y classifying according to waste directives Do not allow children sit climb on or enter in the product Children should be supervised to ensure that they do not play with the product Close the loading door when you leave the area where the product is located 2 Installation Refer to the nearest Authorised Service entilation hose and connecti gor for installation of your product Preparation of location and electrical installation for the product is under customer s responsibility A Installation and electrical connections must be carried out by a qualified personnel A Prior to installation visually check if the product has any defects on it If so do not have it installed Damaged products will cause risks for your safety Appropriate installation locati on e Install the product in an environment which has no risk of freezing and is ina stable and level position e Operate your product in a well ventilated dust free environment e Do not block the air ducts in front of and under the product with materials such as long pile rugs and wooden bands e Do not place your product on a long pile rug or on similar surfaces e Do not install the product behind a door with a lock sliding door or a hinged door which can strike the product e Once the product is installed it should stay at the same place where its connections have been made When installing the product make sure that the rear wall of it does not to
Download Pdf Manuals
Related Search