Sanyo VCC-4374 User's Manual
Contents
1. Internal sync Line lock manually switchable 470 TV lines horizontally 350 TV lines vertically 1 0 Vp p 75 ohms composite More than 48 dB Approx 0 07 lux with a F 1 2 lens B W mode Approx 1 4 lux with a F 1 2 lens color mode anual color black and white setting anual ON OFF switching Multi zone light measuring system Active when using an auto iris lens Manual ON OFF switching 1 4 lux to 70 000 lux F 1 2 lens color mode 2 0 lux to 100 000 lux F 1 4 lens color mode 12 5mm 0 5 mm ATW Manual switching CS mount or C mount with the supplied adaptor Power supply Power consumption Weight Temperature 10 C 50 C Humidity less than 90 no condensation 24V AC 60 Hz 3 8 W with auto iris lens 3 0 W without auto iris lens Approx 450 g without lens 16 English SPECIFICATIONS HE Dimensions mm 136 2 x _ 67 1 126 5 2 fe D 411 15 4 1 4 20 UNC 25 2 Features and specifications are subject to change without prior notice or obligations English 172. WARRANTIES EXPRESS OR IMPLIED WITH REGARD TO THIS PRODUCT INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS IN NO EVENT SHALL SFC BE LIABLE FOR ANY SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE OWNERSHIP OR USE OF THIS PRODUCT OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL SFC S LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER ARISING OUT OF OR IN CONNECTION WITH THE SALE USE OR OWNERSHIP OF THIS PRODUCT INCLUDING WARRANTOR S NEGLIGENCE ALLEGED DAMAGED OR DEFECTIIVE GOODS WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT ATTENTION For your protection in the event of theft or loss of this product please fill in the information below for you own personal records Model No Serial No Located on back or bottom side of unit Date of Purchase Purchase Price Where Purchased Depending on the conditions of use installation and environment please be sure to make the appropriate settings and adjustments If F EAT U R E S you need help with installation and or settings please consult your dealer oo Aa SS e The optical filter is switched automatically to color image or black and white image according to the subject brightness CO NTE NTS e Built in interline transfer method 1 3 CCD approx 410 000 picture elements e Low smear anti bloom
3. for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by Sanyo may void the user s authority to operate this camera 2 English PRECAUTIONS E Incase of problem Do not use the camera if smoke or a strange odour comes from the unit or if it seems not to function correctly Disconnect the power cord immediately and consult your dealer or a Sanyo Authorized Service Centre E Do not open or modify Do not open the cabinet as it may be dangerous and cause damage o the unit For internal settings and repairs consult your dealer or a Sanyo Authorized Service Centre E Do not put objects inside the unit ake sure that no metal objects or flammable substance get inside he camera If used with a foreign object inside it could cause a fire short circuits or damages f water or a liquid gets inside the camera disconnect the power cord immediately and consult your dealer or a Sanyo Authorized Service Centre Be careful to protect the camera from rain sea water etc W Be careful when handling the unit To prevent damages do not drop the camera or subject it to strong shock or vibration W Install away from electric or magnetic fields If ins
4. h if I lt 1 Video signal connections p gt gt VIDEO IN SS gt VIDEO OUT Basic connection for monitoring or recording The peripheral devices VCR monitor lens etc and cables are sold separately 1 Make the video signal connection between the camera and the monitor or time lapse VCR 2 Connect to 24 V AC UL listed class 2 power supply CAUTION To prevent camera and or power supply failure pay close attention to polarity when making the connections e To prevent fire hazard any UL listed wire rated VW 1 should be used for the 24 V AC cable input terminal 3 Insert the plug of this power cord into a wall outlet The POWER indicator A will light Adjust the picture on the monitor using the Brightness and Contrast controls HB Coaxial cable type and maximum length e Cable type RG 59U 3C 2V 250 m maximum e Cable type RG 6U 5C 2V 500 m maximum e Cable type RG 11U 7C 2V 600 m maximum CAUTION e The RG 59U type cable should not be run through electrical conduits or through the air e Using CCTV Video grade coaxial cable 10 English SETTINGS Camera setup section E Line phase adjustment Set the SYNC switch to the L L position When using a camera switcher to connect 2 LL cameras or more to one monitor there may be a vertical roll of the images when switched In t such a case set as described below Switch the display o
5. is on Video output connector VIDEO OUT BNC type wie Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector gog gesce Manual color black and white setting terminal CONTROL GCB au ek e G ground terminal e C color terminal e B black and white terminal Line phase adjustment volume LINE PHASE When using two cameras or more the image on the monitor may roll vertically when switching sources This rolling can be minimized by turning this volume 24 V AC input terminal 24 V AC GND Camera setup section under the cover These settings are for when using a 1 3 inch CS mount DC without EE internal amplifier type lens However if due to installation conditions or environment the settings may need to be modified for best results see SETTINGS To access the controls loosen the cover fixing screw then remove the cover Lens iris output connector LENS This 4 pin connector is used to send the DC control signal and power supply to an auto iris type lens 4 English PARTS NAMES 3 Flange back lock screw Lens mount cap The cap is installed to protect the lens mount section Remove the lens mount cap before installing a lens sold separately Flange back adjustment lever See page 7 Camera installation bracket The bracket can be fixed at the top or bottom of the camera When fixing the bracket be sure to use the longer
6. screws and install the shorter screws on the opposite side to seal the openings Shorter screws M3 x 4 Longer screws M3 x 6 Camera mounting screw hole 1 4 20 UNC CAUTION When installing the camera support select a location that can support the total weight of the camera and accessories English 5 CONCERNING AUTO IRIS LENSES DC VIDEO A I LENS E DC type auto iris lens A lens without amplifier circuit that operates only on a DC power source In general this type of lens is referred to as DC type coil lens or DC type non amplifier lens Set the A I LENS switch to the DC position E VIDEO type auto iris lens A lens with amplifier circuit that operates on video signal and DC power source In general this type of lens is referred to as EE amplifier type lens ALC and LEVEL volume level controls are available on the lens for iris adjustments Set the A I LENS switch to the VIDEO position Hi Compatible auto iris lenses 1 3 inch Sanyo DC type lens VIDEO type lens VCL CS8LY Standard angle f 8 mm Standard angle f 9 mm VCL CS4LY Wide angle f 4 mm Telephoto angle f 12 mm VCL CS2LY Ultra wide angle f 2 8 mm More telephoto angle f 16 mm W If using a VIDEO type auto iris lens e Set the ALC and LEVEL controls on the lens to adjust the iris Normally the ALC volume should be turned all the way to Av Average e Depending on the type of lens us
7. the periods specified below SFC will repair or replace at its option the product and any of its parts which fail to conform to this warranty The warranty period commences on the date the product was first purchased or rented at retail LABOR PARTS IMAGE DEVICE 3 YEARS 3 YEARS 3 YEARS EXCLUSIONS This warranty does not cover A the adjustment of customer operated controls as explained in the appropriate model s instruction manual or B the repair of any product whose serial number has been altered defaced or removed This warranty shall not apply to the cabinet or cosmetic parts batteries or routine maintenance This warranty does not apply to uncrating setup installation removal of the product for repair or reinstallation of the product after repair This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including but not limited to any malfunction defect or failure caused by or resulting from unauthorized service or parts improper maintenance operation contrary to furnished instructions shipping or transit accidents modification or repair by the user abuse misuse neglect accident incorrect power line voltage fire flood or other Acts of God or normal wear and tear The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to assume for it any other obligation or liability SFC DISCLAIMS ALL OTHER
8. K OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE For the customers in Canada This Class B digital apparatus complies with Canadian ICES 003 Pour la client le canadienne Cet appareil numerique de la Classe B est conforme a la norme NMB 003 du Canada This installation should be made by a qualified service person and should conform to all local codes This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician
9. SANYO INSTRUCTION MANUAL VCC 4374 COLOR CCD CAMERA DAY NIGHT About this manual Before installing and using the camera please read this manual carefully Be sure to keep it handy for later reference SANYO INDUSTRIAL VIDEO COLOR VIDEO CAMERA LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user s expense unless specifically stated otherwise in this warranty The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll free number listed below For product operation authorized service center referral service assistance or problem resolution call CUSTOMER INFORMATION 1 800 421 5013 Weekdays 8 30 AM 5 00 PM Pacific Time For accessories and or parts call PARTS ORDER INFORMATION 1 800 726 9662 Weekdays 8 30 AM 5 00 PM Pacific Time THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR RENTED IN THE UNITED STATES OF AMERICA EXCLUDING ALL U S TERRITORIES AND PROTECTORATES THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER OR END USER THE ORIGINAL DATED BILL OF SALE SALES SLIP OR RENTAL AGREEMENT MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED Subject to the OBLIGATIONS above and EXCLUSIONS below SANYO Fisher Company warrants this SANYO product against defects in materials and workmanship for
10. ase change to incandescent lighting or set the El BLC switch to the OFF position and use an auto iris lens e When shooting bright subjects pay attention to the light angle in order to avoid or minimize the smear phenomenon effect English 13 When using an auto iris lens for indoor outdoor use Set the El BLC switch to the OFF position CAUTION If conditions are outside the electronic iris operation range or more than the maximum illumination it will cause saturation of the CCD In that case use a manual iris lens SETTINGS E C B W color black and white switch setting This switch lets you select the timing of the automatic switching of the optical filter to color image or black and white image according to the subj according H for a brighter setting than L L Standard setting Notes ect brightness The default setting is L Set the switch to the brightness C BW tal Tl L Fig 2 e After the power has been turned off switching will restart from color when the power is restored e A sound may be heard when the color image or black and white image is switched Also the image will be distorted as shown in Fig 2 this is normal and does not indicate a problem e When using infrared lighting if there is a strong reflection on the subject the optical filter may switch from black and white to color mode Use only enough infrared lighting so that the mo
11. de is not switched e The focus setting may be different in black and white mode and color mode Please check the focus setting in both modes WE Manual color black and white setting Connect each pin of t he CONTROL terminal as indicated below to set the image to black and white or color as desired Color image sett Connect the C co e Black and white ing or and the G ground pins setting Connect the B black and white and the G ground pins CONTROL terminal Cc B Image Auto Black and white color Notes Auto e The maximum length of cable for CONTROL terminal is 600 m AWG 24 e During optical filter switching even if the manual switching operation is done white or color Ma you cannot determine if the image is black and nual switching will have to be done one more time 14 English TROUBLESHOOTING Before taking the camera for repairs please check below to make sure that the camera is used correctly If it still does not perform correctly please consult your dealer or a Sanyo Authorized Service Centre E No picture on the monitor screen e Is the power turned on to all connected devices Is the voltage correct e Are all the signal connecting cables correctly connected e ls the lighting sufficient e Has the lens cap been removed e Is the lens type DC or VIDEO correctly selected Depending on the type of lens the A I LENS switch must be set acco
12. ed the lens may not perform properly In such a case adjust the LEVEL volume on the lens casing to correct 6 English FLANGE BACK ADJUSTMENT Flange back lock screw Fig 1 English 7 If the pick up surface is not correctly positioned with relation to the lens focal point the picture will be out of focus in particular when using auto iris power zoom lenses sold separately If that is the case adjust the flange back position as described below 1 Using a screwdriver loosen the flange back lock screw M2 2 Set the zoom lens to the maximum telephoto position set the focus using the focus ring on the lens 3 Set the zoom lens to the maximum wide angle position set the focus using the flange back adjustment lever 4 Repeat steps 2 and 3 until the image stays in focus when changing from a telephoto shot to a wide angle shot When the setting is complete tighten the flange back lock screw Note When flange back lock screw is completely tighten it will protrude slightly as shown in the illustration Fig 1 Do not tighten the screw further MOUNTING THE LENS C mount type lens 2 CS mount type lens Please use a DC type auto iris lens sold separately Checking the lens mount Do not use a lens if length L is more than 5 mm If not that may damage the camera and prevent proper installation Remove the lens mount ca
13. et the LEVEL VR301 volume when shooting in the conditions described below L counterclockwise To decrease the contrast H clockwise To increase the contrast e If shooting simultaneously in a dark room and through a bright window e If the subject background is extremely bright or dark e If the brightness of the picture on the monitor is not correct E Backlight compensation setting Use an auto iris lens and set the El BLC switch to the BLC ON position to engage the El backlight compensation function If using a VIDEO type auto iris lens e The ALC volume on the lens should be turned all the way to Av Average BLC e If the backlight compensation function does not compensate properly for the conditions set using the LEVEL volume on the lens CAUTION The electronic iris function and the backlight compensation function cannot operate simultaneously 12 English SETTINGS E Electronic iris function setting Use a manual or fixed iris lens and set the lens aperture to the shortest F stop Set the EI BLC switch to the EI ON position EI ON OFF t ON BLC Note Please refer to the specifications for dynamic range of the electronic iris CAUTION e The electronic iris is suitable for normal indoor use When the EI BLC switch is set to the EI ON position do not use an auto iris lens e If used under fluorescent light the image may flicker In such a c
14. ing low lag no burning and no geometric INFORMATION TO USER ssssssssssssssesscssesssssssessessersesersesssssersessereseerees 2 distortion using the CCD solid state image device PRECAUTIONS ccc ee ae en Spas eg nae Pc 3 e 100 solid state components giving excellent immunity to shock PARTS NAMES 4 and vibration e Not subject to interference from magnetic or electrostatic fields e High sensitivity minimum required illumination is 0 07 lux F1 2 CONCERNING AUTO IRIS LENSES c sssssssssssssessssessessssssessssiess 6 FLANGE BACK ADJUSTMENT B W mode MOUNTING THE LENS cssssssssssssssssssssssssssssssesserssessssesssesserserecsesees e Horizontal resolution more than 470 TV lines CONNECTIONS cssssssssssssssscsscsesssssssesesseressesseserssessesserestersesersssessenseress e Power supply 24 V AC operation SETTINGS inaianei inanakan anarai TROUBLESHOOTING assssscscssecssonessccsacssustcechssssuessccrsscssnosssecesenustoreecia 15 ACCESSORI ES SPECIFICATIONS D C mount adaptor 5 MM ccccccccccscccsecseseesecsesetssteeseessseeeees 1 pe The C mount adaptor must be used to be able to install a C mount lens on the camera Lens iris plug 4 PIN ec ese eee eeteeeseteeeteeeeeeeeesed PC English 1 INFORMATION TO USER Safety Guard THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT WARNING TO PREVENT THE RIS
15. n the monitor from camera INT 1 to camera 2 SYNC Adjust the LINE PHASE volume on camera 2 until the vertical roll of the image stops If more than two cameras are used please repeat this procedure for all the cameras Control name Position Color and Black White level switch L C BW SYNC switch SYNC INT Y gt Red and Blue color adjustment volume about centre Z ia CAUTION White balance switch WB A a es If the vertical roll cannot be corrected by setting the LINE PHASE Electronic iris El Backlight OFF volume on camera 2 try setting the LINE PHASE volume on camera compensation BLC switch 1 If it still cannot be corrected please check that the polarity of the Auto iris lens switch A I LENS DC power cords of all connected devices is correct Lens iris level volume LEVEL about centre English 11 SETTINGS E White balance adjustment Normally the WB white balance switch is set to the A automatic position and the white balance is adjusted automatically If a manual E white balance adjustment is necessary follow the steps below Set the WB switch to the M manual position then adjust the color M e Turn R VR303 to set the red ratio and or K B VR302 to set the blue ratio VR303 VR302 E Lens iris adjustment a E N VR301 If using a DC type auto iris lens you will need LEVEL to s
16. p from the camera Install the auto iris lens CS mount type lens Carefully align the lens mount with the camera opening then turn the lens slowly to install it C mount type lens To allow for flange back adjustment install the supplied C mount adaptor on the lens mount then carefully align the lens mount with the camera opening and turn the lens slowly to install it Connect the lens plug to the lens iris output connector LENS on the side of the camera When using lenses from other makers the plug shape may not correspond to the terminal on the camera In such a case remove the original plug and using a soldering iron connect the supplied lens iris plug according to the diagram Refer to page 9 8 English MOUNTING THE LENS E Rewiring the lens cable in the lens iris plug 1 Prepare the lens cable Cut the cable at the plug then remove approx 8 mm of the cable sheath and strip about 2 mm from each wire 2 Install the lens iris plug Solder the cable to the pins following the correct pin layout refer to the table and illustrations then close the plug cover Pin layout DC type lenses VIDEO type lenses Brake coil 12 V DC 50 mA max 2f a Brake coil Not used ots Drive coil Video output 1 0 Vp p high impedance 4 Drive coil Ground for video signal and DC power English 9 CONNECTIONS on SA
17. rdingly e ls the iris control correctly set A When using a DC type lens the LEVEL volume inside the camera casing should be adjusted B When using a VIDEO type lens the LEVEL volume on the lens should be adjusted E The picture is not clear e Is the monitor correctly adjusted e Is the flange back position correctly set e Is the lens focus correctly adjusted e Are the lens surfaces clean If there is dust or finger prints on the lens the image quality will deteriorate To clean the lens use a soft cloth or a commercially available lens cleaning set SERVICE This camera is a precision instruments and if treated with care will provide years of satisfactory performance However in the event of a problem the owner is advised not to attempt to make repairs or open the cabinet Servicing should always be referred to your dealer or Sanyo Authorized Service Centre English 15 SPECIFICATIONS E Camera Scanning system Interlace Image device Picture elements Effective picture elements Synchronizing system Resolution Video output level Video S N ratio Minimum required illumination incandescent lighting Control terminal Backlight compensation Iris function Electronic iris range Flange back White balance Lens mount NTSC standard TV system 525 TV Environmental conditions lines 30 frames sec PLL 2 1 interlace 1 3 inch solid state image device CCD 811 H x 508 V 768 H x 494 V
18. talled close to a TV radio transmitter magnet electric motor transformer audio speakers the magnetic field they generate will distort the image English 3 E Protect from humidity and dust To prevent damages to the camera do not install it where there is greasy smoke or steam where the dampness may get too high or where there is a lot of dust E Protect from high temperatures Do not install close to stoves or other heat generating devices such as spotlights etc or where it could be subject to direct sunlight as hat could cause deformation discoloration or other damages Be careful when installing close to the ceiling in a kitchen or boiler room as the temperature may raise to high levels nstall where the temperature range will stay between 10 C and 50 C no condensation E Cleaning e Dirt can be removed from the cabinet by wiping it with a soft cloth To remove stains wipe with a soft cloth moistened with a soft detergent solution and wrung dry then wipe dry with dry soft cloth Do not use benzine thinner or other chemical product on the cabinet as that may cause deformation and paint peeling Before using a chemical cloth make sure to read all accompanying instructions Make sure that no plastic or rubber material comes in contact with the cabinet for a long period of time as that may cause damage or paint peeling PARTS NAMES Power indicator POWER a Comes on when the power to the camera
Download Pdf Manuals
Related Search