Home

Sanyo #NC-MQN09W User's Manual

1. storage condition typically eneloop does not need to be recharged for the first time if used within 2 years from the manufactured date However there may be a time when some digital cameras may display the low battery indicator In these cases please recharge a All statements concerning capacity mAh or the life of the battery cycle life are based on IEC61951 2 Statements concerning long term storage is based on simulations at room temperature Output PUL AAA 2 4 x 1 2V 150mA Temp range 5 C 35 C Battery Type Ni MH oaae mo AA 1000mAh approx 4hrs AA AA 2000mAh approx 7 5hrs AA 2700mAh approx 10hrs AAA 600mAh approx 5hrs AAA AAA 800mAh approx 6hrs AAA 1000mAh approx 7hrs Charge time is the time it takes to charge a fully discharged battery The charge time will depend on the remaining charge in the battery and the ambient temperature Charging time for AAA batteries take slightly longer time due to charging current and to prevent overheating Indication light Appearance Status Handling Indicator lights are on T Normal z a Finish Indicator lights are off charging Battery ready for use a No battery put inside charger Indicator lights Default b Battery connected incorrectly flashing mode c The charger has internal failure d Power off How to charge 1 This charger is designed to charge 2 or 4 pcs of AA or AAA Ni M
2. H rechargeable batteries AA and AAA batteries can be charged at the same time 2 If you want to charge 4 pcs of AA or AAA put batteries into the charger compartments taking care to observe polarity as indicated inside the charger 3 If only charging 2 batteries at a time place the batteries in the eft or right side compartments of the charger 4 Insert AC Cord into the inlet and plug into AC100 240V outlet 5 Confirm that the indicator lights are on Do not plug in upside down If plugged in upside down it will finish charging before it is fully charged 6 When charging is complete the indicator lights will turn off Refer to charging chart for typical charge time 7 After charging is done remove the charger from AC100 240V outlet and keep aside
3. SANYO Notes on Safety Please read for proper use Severity of symbol Danger Very close to causing death or heavy damage to human body Charger Model NC MQNO9W Regarding Ni MH batteries Please follow the instructions below to avoid damage or injury Warning May cause death or heavy damage to human body Caution May cause heavy damage to human body or property damage Example of the symbols This symbol is to inform that the action written inside of the symbol is prohibited Left symbol is to prohibit you from dismantling Safety issues of charger Z Danger Use under the specified voltage S Please use under AC100V to 240V Otherwise may cause high heat fire breakout electric shock or harm to human body A Warning Do not allow metal objects come into contact with charger May cause electric shock excessive heat or fire This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance Do not charge non rechargeable batteries AN Caution May deform charger causing high heat leakage or explosion Do not place heavy object
4. immediately Do not connect 10 batteries or more in series Z N Caution Operating temperature range for Ni MH battery Discharge 5 C to 50 C Recharge 5 C to 35 C Store 20 C to 30 C Outside of the indicated range battery s performance and life cycle may decrease Do not use these batteries together with dry cells other types of batteries new or old batteries together or batteries with different charge levels With this charger you can charge up to 4 AA or 4AAA Ni MH batteries AAA contact surface AA contact surface Charge indicator light Lights are on when charging Lights are off when charging is complete How to insert Match the and terminal of the battery with the charger s and contact surface For AA battery insert from the terminal and push on the terminal i For AAA battery insert from terminal as in the picture then place terminal into contact surface F How to insert a AA battery T ow to remove For AA battery take out from terminal For AAA battery if pushed on he side side will pop out or easy removal How to insert a AAA battery Input AC100 240V 50 60Hz 8W Size 118 x 72 x 32 5 mm AA 2 4 x 1 2V 300mA Weight 98g Correct use of eneloop Ni MH battery About Charging Depending upon
5. s on top of the charger Avoid S unstable locations like areas with strong magnetic fields or dust May cause excessive heat or fire temperature is higher charger may cause the battery to leak or rupture Charging Safety Do not charge near hot temperatures like an electric blanket stove near direct sunlight inside of a car or under hot sun etc In addition please do not cover the charger with a blanket In such cases battery would not be fully charged because the temperature inside of the charger will become hot and the safety protective function will be activated and stop charging Q Charger should be used between 5 C to 35 C If ambient Please charge at temperature between 5 C to 35 C SANYO Electric Co Ltd Z N Danger Donot dispose of in fire Do not heat deform solder disassemble or modify Do not insert batteries with the and ends reversed f leaked liquid gets in the eyes wash them with clean water and consult a doctor immediately Batteries should not be used in underwater lighting or in sealed electronic devices Z Warning Do not connect the and ends with metal objects When carrying or storing batteries avoid direct contact with metal objects Children should be supervised while handling the batteries Do not peel off or damage the outer tube f leaked liquid gets on the skin or clothing wash off with clean water

Sanyo #NC-MQN09W User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents