Remington MC R-830 User's Manual
Contents
1. 28879 _R800_revised series vegies 4 02 PM Page 1 REMINGTON MICROFLEX 200 Use and Care Guide R 830 R 835 28879_R800_revised series 11 4 05 4 02 PM Page 2 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance basic precautions should always be observed including the following Read all instructions before using this appliance DANGER To reduce the risk of electric shock Do not reach for an appliance that has fallen into water Unplug it immediately Do not use while bathing or in the shower Do not place or drop into water or other liquid Do not place or store this appliance where it can fall or be pulled into a tub or sink Except when charging always unplug this appliance from the electrical outlet immediately after using Unplug this appliance before Cleaning it WARNING To reduce the risk of burns fire electric shock or injury to persons This appliance is for household use only An appliance should never be left unattended when it s plugged in except when charging a rechargeable appliance Close supervision is necessary when this appliance is used by on or near children or invalids Use this appliance only for its intended use as described in this manual Do not use attachments not recommended by Spectrum Brands Inc Keep the cord away from heated surfaces Never operate this appliance if it has a damaged cord or pl2. ages your whiskers to stand out making it easier for them to enter the cutting chamber It is not necessary to apply pressure while shaving just let the shaver glide lightly on your skin Never press hard Pressing only flattens your whiskers which makes it harder for them to enter the cutting chamber It will also wear out the cutting surface more quickly A gentle touch makes shaving easier and helps avoid possible skin irritation To Trim Trim mustache E Use the shaver heads to trim the lower edge of your mustache Hold shaver at desired trim line for a quick easy professional trim Use the pop up trimmer for the upper edge of your mustache Extend the trimmer and touch the edge of it to the desired line Trim sideburns Extend the trimmer and touch the edge of it to the desired trim line 28879_R800_revised series 11 4 05 4 02 PM Page 8 Cleaning and Maintenance To assure smooth efficient performance it is important to clean your shaver Daily Brush inside the head assembly after each use 1 Turn the shaver off 2 Grip the head assembly by the three ridges and pull it off the shaver 3 Use the cleaning brush to sweep out the internal part of the head assembly and the hair pocket area where 3 shaver spindles are located 4 Replace head assembly Weekly Clean under the cutter assembly at least once a week 1 Turn the shaver off 2 Open the head as
3. e of consumer purchase This warranty does not include damage to the product resulting from accident or misuse If the product should become defective within the warranty period we will repair it or elect to replace it free of charge Return your product and sales receipt with your name address and day time phone number to Spectrum Brands Attention Consumer Services 601 Rayovac Drive Madison WI 53711 For more information call 800 736 4648 Warranty excludes Screens and cutters KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES This warranty does not cover products damaged by the following Accident misuse abuse or alteration of the product Servicing by unauthorized persons Use with unauthorized accessories H Connecting it to incorrect current and voltage Wrapping cord around appliance causing premature wear amp breakage other conditions beyond our control SPECTRUM BRANDS INC SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT ALL IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY ARE LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province Some states do not allow the exclusion or limitation
4. er coatings Do not clean or remove the head assem bly while the shaver is running or plugged in as it may cause damage to the unit s heads or cutters Replace worn or damaged parts with Remington replacement parts only When is it Time to Replace Your Heads and Cutters It is very important to replace your heads and cutters when necessary to ensure a close comfortable shave with out irritation We recommend they be replaced every 12 months Here are some signs of head and cutter wear indicating that replacement is needed Irritation As the heads get excessively worn you may experience some skin irritation This would be especially noticeable when you apply after shave lotion Pulling When the cutters wear you may feel a sense of pulling and a loss of closeness when you shave This is an indication that it is time to replace your heads and cutters The replacement parts for your shaver is model SP 16 U S residents To order contact us at 800 736 4648 visit us at www remington products com or visit your local retailer Canadian residents For any shaver accessory requirements please call 800 268 0425 or visit us at www remington products com 28879_R800_revised series 11 4 05 4 02 PM Page 10 Performance Guarantee Full Two Year Warranty Spectrum Brands Inc warrants this product against any defects that are due to faulty material or workmanship for a two year period from the original dat
5. mer button E Head guard F Cleaning brush G Storage pouch Model R 835 G _ Easy View Trimmer 28879_R800_revised series 11 4 05 4 02 PM Page 6 Please refer to your Safety Instructions before operating your shaver Removing the Headguard Before operating your shaver remove the headguard which protects the screen and cutter assembly It is important to remove the headguard correctly to avoid damaging the clips that hold it to the shaver 1 Press lightly on the top of the headguard 2 Lift the lower rear edge 3 Pull the headguard away from the shaver Always keep the protective head guard on the shaver head and keep the trimmer in the OFF position when the shaver is not in use ON OFF Switch To activate the shaver press in the locking bar while pushing the power button up Power System Corded shavers can only be used while they are plugged into an electrical outlet Corded Operation of the R 830 and R 835 E Slide the power button down to the OFF position Connect the supplied AC power to the shaver s power port and then to an electrical outlet Operating the Easy View Trimmer The Easy View pop up trimmer extends to trim mustache sideburns etc E Trimmer is turned off until it is extended for use E Push the trimmer button up to pop up the trimmer E Hold the shaver with the trimmer toward you when
6. of incidental special or consequential damages Performace Guarantee Spectrum Brands Inc Money back Offer If within 30 days after you have purchased your Remington branded product you are not satisfied and would like a refund return it with the sales slip indicating purchase price and date of purchase to the retailer from whom it was purchased Spectrum Brands Inc will reimburse all retailers who accept the product within 30 days from the date of purchase If you have any questions concerning the money back guarantee please call 800 736 4648 120 VAC 60 Hz U S Patents D486 942 5 390 416 5 408 749 Canadian Patents 0100892 2 091 039 2 114 923 2 111 626 REMINGTON amp MICROFLEX are trademarks of ROVCAL INC Questions or comments Call 800 736 4648 in U S or 800 268 0425 in Canada Or visit www remington products com Dist by Spectrum Brands Inc Madison WI 53711 Dist by Rayovac Canada Inc Mississauga L4W 217 2005 ROVCAL INC 09 05 Job S28879 P N15486 MADE IN CHINA UL 28879_R800_revised series 05 4 02 PM Page 36 REMINGTON
7. sembly as above 3 Unscrew the center screw knob to remove the cutter retainer assembly 4 Use the cleaning brush to sweep the dust and hairs from under the cutters 5 Replace head assembly Lubricate Remington Shaver Saver Lubricant SP 4 lubricates and cleans your shaver s cutters and head assembly The lubricant helps remove hair clippings while reducing wear A quick spray after each shave keeps your shaver operating at peak performance Important Make sure to align the two locating holes in the Cutter Retainer assembly with the pins in the Head Frame Assembly See illustration below Then tighten center screw knob to lock the cutters into place Replace head assembly on the shaver simply by pushing it onto the shaver Cover shaver head with plastic headguard between uses When removing the head guard or placing it back onto the shaver do not apply pressure to floating cutter surfaces as you may damage them Cutter retainer assembl 2 fe Center screw knob Locating holes Head frame assembly Floating cutter Locating pins heads Cleaning Cautions The construction of this shaver is for dry operation only It is not water proof Never put the shaver in part or completely into water Never clean the shaver or replace the cutters while it is plugged into an electrical outlet Do not use an aggressive cleansing agent as this may destroy the shav
8. trimming E After trimming pull the trimmer button downward into the OFF position Leave it in the down position when not in use Usage Tips Getting a close comfortable shave Remington shavers need no adjustments to their heads or cutters before you shave The heads will automatically adjust to the con tours of your face Adjusting to your new shaver As with every shaver your shave will improve over time So allow about three weeks to develop an effective shaving style and for your beard to adjust to the new shaver The adaptation period may take a little longer if your skin is sensitive or if you alternate between shaving methods Before you begin Wait at least 15 minutes after getting up before shaving to ensure the face is free of puffiness that may be present from sleeping Make sure your face is clean and dry before starting E Always use a clean dry shaver Make sure the cutter head assembly is in the locked position To Shave E Push the ON OFF button to activate the shaver for shaving Hold the shaver so all the heads touch your face together This allows the shaver to work the way it was designed for the Closest shave and minimum weal AN a Avoid holding the shaver at an angle so only one head touches the skin This could cause skin irritation Use short circular strokes Use your free hand to stretch your skin This encour
9. ug if it is not working properly if it has been dropped or damaged or if it has been dropped into water If Never drop or insert any object into any of the appliance s openings Do not use outdoors or operate where aerosol spray products are being used or where oxygen is being administered Always store this appliance and cord in a moisture free area Do not store it in temperatures exceeding 140 F 60 C Do not plug or unplug this appli ance when your hands are wet Do not use an extension cord or a voltage converter with this appliance Do not wrap the cord around the appliance Never use while sleeping Always attach the plug to the appliance then to the outlet To disconnect turn all controls to OFF then remove plug from outlet Detach removable power cords from appliances for storage Do not use this appliance with a damaged or broken screen or cutters as injury may occur Shavers are for use on facial hair only Should not be used for shaving the hair on your head SAVE THESE INSTRUCTIONS any of these things happen return the appliance to an authorized service center for examination English 1 and repair 5 5 13 25 a 28879_R800_revised series 11 4 05 4 02 PM Page 4 Product Features Shaver Parts A Head amp cutter assembly B ON OFF button Power port D Trim
Download Pdf Manuals
Related Search