Display CE-VT288 / CE-VT588 CE-VT568 / CE-VT768 CE
Contents
1. Display CE VT288 CE VT588 CE VT568 CE VT768 CE VT988 CE VT968 User Manual Included Items e Monitor e Stand Instruction Sheet e Power Supply e VGA Cable Using the Buttons Pressing the MENU SELECT or 1 button on the unit will enter the menu Pressing it again will enter the current selection Also used to toggle between available settings for certain menu selections MENU SELECT Press the AUTO EXIT or 2 button C to back out to the previous screen or to exit the menu AUTO EXIT item by pressing the down or up A buttons These buttons will also 4 adjust settings Ex raise or lower contrast y Navigate to items in each menu O AUDIO Pressing the Down button when not in the menu will mute unmute the audio This may have no effect on your display as audio functions may be unsupported on your device Pressing the Up button when not in the menu will open the volume menu and raise the volume SOURCE Pressing the AUTO EXIT or 2 button when not in the menu will change the input source RGB VGA input AV1 BNC input 1 AV2 BNC input 2 select models only POWER The power button will toggle the co display on or off e Power button light not illuminated Unit is off e Power button light illuminated green Unit is on e Power button light illuminated orange Unit is in standby mode Will remain in standby until source is changed to an active input If2. VIDEO MODE Change to preset display modes Vivid Normal Nature Cinema or Sport RESET This can be used to return the Video settings back to the default settings Pressing the MENU SELECT or 1 button will return all video settings back to the factory defaults To tilt the display grab the sides and rotate backwards of forwards CE VT 568 768 968 BNC 2 BNC 2 BNC 1 BNC 1 N OUT IN OUT BNC 1 Out Connect an external display to display BNC 1 Input BNC 2 Out Connect an external display to display BNC 2 Input Audio Menu VOLUME Raise or lower the volume on device that is connected to RCA audio inputs Available on supported models only Feature Controls Menu SLEEP TIMER Adjustable from 0 to 90min in 10 minute increments After which time the display will power off The sleep timer is a one time only setting After the display is powered off the sleep timer will reset to OFF LANGUAGE Select from one of the following English French German Spanish Italian Dutch Greek Swedish OSD CONTROL Here you can set the horizontal and vertical position of the OSD menu rotate or mirror the menu and control the duration the menu is on screen 2 16 seconds adjustable in 2 second increments PARENTAL CONTROLS Function not supported on units that do not include a remote control CLOSE CAPTION Activate close caption and change settings for mode and channel Source must have close capti
3. on capabilities to function FACTORY RECALL Pressing the MENU SELECT or 1 button will return all settings back to factory defaults Doing so will void all of your custom settings Ensure this is your intention before proceeding CLINTON Electronics 6701 Clinton Road Loves Park IL 61111 1 800 447 3306 Sales 1 800 549 6393 Support 1 800 633 8712 Fax www clintonelectronics com CLINTON Electronics v 04 06 11
4. you press the power button while in standby mode the unit will turn off When powered back on the display will return on the last input used If no source is connected you will see a No Signal message followed by Source Enter Sleeping Mode Back Panel Inputs vary by model CE VT 288 588 988 i TPT P A PO awe DC IN LAUDIOR BNG en VGA IN BNC Out Connect an external display to display BNC Input BNC input must selected in order to display on external monitor The display should be pre set for most installations however if some adjustment is necessary you may adjust by pressing the MENU SELECT or 1 button on the display Video Menu BRIGHTNESS Set the black level so that the images are at their brightest while the black images are still black Do not adjust too high where the black portions of the image become gray or the image will have a washed out appearance CONTRAST Set the white level so that the images are at their brightest without losing definition in the white portions of the image COLOR Adjust to achieve a realistic image of the items within the viewing area TINT Adjust if the image has bluish or reddish tint to the white portions of the image SHARPNESS Lower the sharpness if the image appears too grainy or pixelated Increase the sharpness if the image appears too soft Note Adjust only after adjusting the camera lens for optimum focus
Download Pdf Manuals
Related Search