PYLE Audio PQ1000 User's Manual
Contents
1. IFCATIONS Frequency response 0 0 2dB 20K Hz power each channel 2 x 250Watts 2 x 500Watts 750Watts 1000 Watts Total Power PQ 3000 INPUT SPECIFIATIONS Input characteristics Input impedance balance 20k ohms Non balance 10k ohms Input level Power Input Input Voltage Frequency 115 230v AC 50 60Hz OUTPUT SPECIFCATIONS Frequency response 0 0 2dB 20K Hz power each channel 2 x 750Watts 2 x 1500Watts 2250Watts PQ 2000 1 INPUT SPECIFIATIONS input characteristics Input impedance balance 20k ohms Non balance 10k ohms Input level Power Input Input Voltage Frequency 115 230v AC 2 OUTPUT SPECIFCATIONS Frequency response 0 0 2 dB 20K Hz power each channel 2 x 500Watts 2x 1000Watts 1500Watts 2000 Watts Total Power2. STEREO POWER AMPLIFIER OPERATING GUIDE PQ1000 x PQ2000 x PQ 3000 9 Unplug the amplifier during lightning storms or when unused for long periods of time 10 Refer all servicing to qualified service personnel Servicing isrequired when the amplifier has been damaged in any way Some examples when the power cord or plug is damaged liquid has been spilled objects have fallen into the amplifier the amplifier has been exposed to rain or moistture it does not operate normally or has been dropped 11 Never break off the ground pin and connect only to a proper power supply type indicaed on the unit For more information write for our free booklet Shock Hazard and grounding 12 If this productis to be mounted on an equipment rack rear support should be provided 13 Exposure to extreme high noise levels may cause permanent hearing loss Individuals vary considerably in regards to noise induced hearing loss but nearly everyone will experience some damage if exposed to intense noise for an extended period of of time The US Government Occupational and Health Administration OSHA has specified the following permissible noise level exposures SOUND LEVEL dBA SLOW RESPONSE DURATION PER DAY IN HOURS 90 92 95 97 100 2 102 105 1 2 110 1 4 ORLESS 115 11 _N who 09 According to OSHA any exposure inexcess of the above permissible limits could result in some hearing loss Ear plugs or protecors to the ear canal
3. egister stove or other apparatus including amplifiers 5 Do not alter a polarized plug two blades with one wider than the other or grounding type plug two blades with a third prong as they provide protection If the provided plug does not fitinto your outlet consult an electrician for replacement of the obsolete outlet 6 Protect the power cord from being damaged particularly near the plugs convenience recep tacles and the point where they connect to the amplifier 7 Only use attachments accessories provided by the manufacturer 8 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the amplifier When a cart is used caution when moving to avoid injury from tipping over wa NN OPERATION A 1 LOGO Logo display 2 INPUT GAIN dB These controls are used to adjust the input gain of each channel They determine how loud each channel of the power amplifier will sound for a given input signal level The maximum input gain is achieved by turning the control completely clockwise this setting yields the maximum mixer system headroom Turning the control back counter clockwise will yield lower system noise at the expense of the mixer system headroom Turning the control fully counter clockwise turns this setting off It is always a good idea to power up any new installation at this setting to protect the system speakers 3 LEVEL INDICATOR Channel 1 and channel 2 level LED ind
4. icator 4 POWER SWITCH This heavy duty rocker type switch turns on the powerto the amplifier When the unit is turned on there is a three second delay which reduces eliminates the turn on ransients associated with the system equipment connected to the amplifier and protects the spekaers OPERATION 5 FAN GRILL 2 2 speed DC fans supply cool air to the amplifier The fans switch to high speed automatically when the unit requires additional cooling 6 INPUT Cannon and input jack connector provide balance or unbalance input mode 7 MODE SWITCH This switch is used to select STEREO or BRIDGE mode operation 8 GROUND LIFT SWITCH 9 BINDING POST OUTPUTS shockproof binding posts are provided For each channel the outputs are in parallel and the speaker connection cables can be terminated with banana plugs or stripped wires 10 SPEAKER OUTPUT The amplifier provides 3 four conductor speaker connectors one for each channel and one for bridge mode 11 POWER SELECT Switch to choose 110 120V or 220 240V power supply 12 POWER INPUT This is a standard IEC power connector An AC main cord which has the appropriate AC plug and rating for the intended operating voltage is included in the carton eK GQ SPECIFCATIONS A PQ 1000 INPUT SPECIFIATIONS Input characteristics Input impedance balance 20k ohms Non balance Input level Power Input Input Voltage Frequency 115 230v AC 50 60Hz OUTPUT SPEC
5. s must be worn when operating this amplification system in order to prevent permanent hearing loss if exposure is in excess of the limits as set forth above To ensure against potentially dangerous exposure to high sound pressure levels it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation Of SAFETY INSTRUCTIONS Intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be strong enough to create a risk of electric shock to a person maintenance servicing instructions in the literature accompanying Intended to alert the user to the presence of important operating and the product CAUTION To reduce the risk of electric shock DO NOTATTEMPT TO OPEN THE AMPLIFIER OR REMOVE THE COVER There are not user serviceable parts inside please use a qualified technician for all servicing WARNING To prevent electrical shock or fire hazard this amplifier should not be exposed to rain or moisture Do not place objects filled with liquid such as vases on amplifier 1 Do not use this apparatus near water 2 Clean only with a dry cloth 3 Do not black any of the ventilation openings Install the amplifier in accordance with all manufacturer s instructions 4 Do not install near any heat source such as a radiator heat r
Download Pdf Manuals
Related Search