Kodak DIRECTVIEW DV3MC User's Manual
Contents
1. 18 Cleaning Cleaning the Cabinet and the Color LCD Monitor eWhen cleaning remove the AC adapter from the color LCD monitor and outlet for safety eLightly wipe off dirt on the cabinet and LCD panel surface with a hard wrung soft cloth soaked in a neutral cleaning solution Follow its instruction when using a disposable cloth eDo not use thinner benzine alcohol or such on the cabinet that is made of plastic These can damage the cabinet alter its quality and cause the paint to peel off eDo not apply insecticides and other volatile items to the cabinet Also do not leave rubber and vinyl products or such in contact with it for long hours This can cause the quality to alter and the paint to peel off eCleaners usable for the color LCD panel are isopropyl alcohol without abrasive non ammonic glass cleaner and watered down neutral cleaning solution Do not use organic solvent such as acetone and toluene eWhen the display has dust on the color LCD panel surface wipe it off with soft moist cloth eTreat the color LCD panel with care Do not rub the LCD panel surface with a rough item or hit it on the surface Also do not strongly press the LCD panel surface This can lead to unevenness in the screen and also to failure of the product An optional protection filter MF 002 is available 19 Specifications Product name Color LCD Monitor Model DV3MC Items Specifications LCD display device 52. Connection Section Portrait shorter side at the top Left side view USB upstream port Connect this port to the upstream connector from the computer For the connection use a USB cable 2 meters or shorter in length USB downstream port x 2 Connect the ports to USB devices a MOUSE etc with a maximum current consumption of no greater than 100mA per port Connect the color sensor when you operate color calibration DC power connector DC IN 12V Connect the attached AC power adapter to the 12VDC power source connector VIDEO input connector SIGNAL Connect a signal cable to the graphics board s digital video signal DVI connector REMOTE IN connector REMOTE OUT connector Used to control serial communication for such as brightness calibration Photo sensor connector This connector is not used The and USB hubs are bus powered types These do not require external power supply and are for connecting to equipments with little dissipation power like a mouse 10 2 Adjusting the Display Angle The screen angle can be arranged by up to 70 degrees either to the right or left bent down by up to 3 degrees and bent up by up to 17 degrees As indicated in the drawing below the adjustment is con ducted by holding the color LCD display in both hands and slowly moving it 17 degrees 70 degrees 70 degrees 3 degrees A GED Be careful not to catch your fingers when adjust
3. Data reading from the color LCD monitor is done through a video signal cable which needs to be connected when Windows 95 98 Me 2000 or Windows XP is on f Note J DDC Display Data channel Power Management What is power management This is the function that truns off the screen by detecting input signal change to reduce consumption current for power saving Setting Refer to the user s manuals of your computer and display drivers for power management settings and time settings for mode change Using Digital Input When using DVI digital input signal under the process of closing connected system or changing resolution noise will be seen This is not a color LCD monitor failure Pulling out or plugging into the DVI cable during DVI digital input use may lead to failure of the display driver on the system Pull out or plug into the DVI cable when the system is off Adjustments of Luminance and Chromaticity DV3MC does not have an OSD adjustment button If you need to make adjustments on luminance and shades of color connect DV3MC and your computer with the attached serial communication cable RS 232C and install DirectColorCal For details refer to the user s manual in the DirectColorCal CD ROM If you wish to make adjustments on color temperature gamma and luminance please purchase an optional calibration kit 16 Assignment of Connector Pins 24 pin DVI D Connector female DIGITAL Si
4. E Kodak DirectView 3MP Color Display Model DV3MC Thank you for purchasing our Color LCD Monitor Carefully read this User s Manual and use the product properly Before using it also read Safety Precautions Keep the User s Manual as close to you as possible and in safe custody if you have lost the manual contact your dealer We will reissue a manual CAT 802 6635 Contents 1 Safety Precautions iscissi 3 2 AUKINATOS inneir 7 J FOALUNOS iscvtecsiceeccccenstere ua NA 8 4 How to Operate pieniin 9 5 Connection Method s src 13 6 RefGreNnCe atanena 16 7 Assignment of Connector Pins 17 8 Failure Diagnosis 18 Q Clean cAstaei tha wsdia See 19 TO Specifications e sccs csiciceccanserccnevacenczes 20 11 Technical SUpPOFt is iinitan 22 Safety Precautions A Attention Consult accompanying documents A Dangerous Voltage Risk of electric shock To reduce the risk of electric shock Do not remove the back cover No user serviceable parts inside Refer to qualified service Personnel CE FCC Information FCC U S Federal Communications Commission This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not
5. 240 V single phase circuit Please consult with the dealer from whom you purchased it about waste disposal This equipment shall not to be used around the patient vicinity which is the space with surfaces likely to be contacted by the patient or an attendant who can touch the patient This encloses a space within the room 1 83 m 6 feet beyond the perimeter of the bed in its intended location and extending vertically 2 29 m 7 1 2 feet above the floor Equipment Classification Type of protection against electric shock Class Il equipment Protection against harmful ingress of water Ordinary Equipment IPX0 No protection Not suitable for use in the presence of a flammable anesthetics or oxygen Mode of operation Continuous operation Follow the instructions below for safety use of the color LCD monitor Read this user s manual and properly use the unit You must agree that Kodak is not liable for any damage caused by any third party s or your negligence of following the instructions of this user s manual and misuse except those specified responsibilities for compensation accepted by law eSymbols This user s manual contains various symbols to guide users to properly use the product The contents in each box below express the events that will occur following neglects of signs and misuse Confirm the contents shown here and then read this manual carefully eMeaning of symbols S expresses DO NO
6. installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause unacceptable inter ference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult your dealer or an experienced radio TV technician for help FCC Warning To assure continued FCC compliance the user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores Also any unauthorized changes or modifications to this monitor would void the user s authority to operate this device The Responsible Party located within United States U S ELECTRONICS INC Tel 1 888 926 2605 CE Certification This device complies with the requirements of the MDD directive 93 42 EEC Medical Device Directive Warning This apparatus must be earthed because of Class equipment This apparatus is no patient contact equipment When using at 240 V in United States supply must be from center tapped
7. 3 cm 20 8 inch Color TFT Normally Black Pixel pitch Horizontal 0 207 mm x Vertical 0 207 mm Display area Horizontal 318 0 mm x Vertical 423 9 mm Pixel 1536 x 2048 pixels Display gradation 16 77million 8 bit each Backlight 12 cold cathode fluorescent lamps CCFL Optical characteristics of the LCD Horizontal 85 deg contrast ratio 10 1 Vertical 85 deg contrast ratio 10 1 Contrast ratio 300 1 viewing angle vertical lateral 0 Factory setting brightness Maximum brightness 120 cd m 20 cd m 160 cd m over Input sync signal Compliant with DVI 1 0 Available resolution 640 x 480 800 x 600 1024 x 768 1536 x 2048 Fv 30Hz 2048x 1536 Fv 30Hz Input terminal 24 pin DVI D connector 4 pin DC power input terminal 8 pin serial connector for communication 8 pin serial connector for sensor connection USB hub function Compliant with USB standard Rev 1 1 Bus powered hub USB UPstream connector x 1 USB DOWN stream connector x 2 Temperature On Off Temperature 5 35 C 20 60 C Humidity non condensation 30 80 10 85 Air pressure 701 1013 hPa 266 1013 hPa Power AC adapter Input AC 100 240 V 50 60 Hz 2 0 1 0A Model MW116 Output DC 12 V 6 67 A Connector 3P AC inlet MME schscussctavveeseh DC 12 V 6 6A Model DV3MC Power consumption Normal operation approx 80 W when the exclusive AC adapter used Power management state Less than 10 W wh
8. T Cautions when setting up A Warning A Caution Person could be at risk of severe injury or death of injury or damage Q expresses MUST DO eDo not put the unit on unstable places on a wonky table and inclined place which might cause injuries arising from its dropping or falling 7 A Caution Q 2 a eDo not place the unit where it is subject to direct sunlight or near any heating device The cabinet and or components may be damaged which may cause generation of fever and ignition Cautions when using eDo not put the unit in such place where it has bad air circulation dust humidity oily smoke and steam A eDo not put any metal materials or flammable foreign objects into the unit from vent holes It may lead to electric shock and or fire In case that any object mentioned above is placed inside mmediately 3 turn off the power disconnect the ff plug from outlet and contact hops Warning may lead to fire N mou GA fa Ne fi eScratching or hitting with hard objects may break the unit eDo not use the unit turned over on its A back pushed on its side or D upside down eDo not place any container filled with water or any chemicals near the unit In case of containers falling down liquid may permeate inside and insulation failure may occur which Caution These may lead the fever that may lead to electric shock the unit g
9. ay be some imperfect displaying pixels lacking constant lighting eWhen placing LCD panel near windows or outside for a long period of time give caution to it sunlight may cause damage on the panel eDo not give LCD panel a strong push scratch it or place any object on it It may cause LCD panel failure eWhen using the unit in a cold place you will see images leave traces or a dark screen but it is not a failure It will go back to the normal state as temperature rises eDo not display still pictures for a long period of time which may cause afterimages eThe minimum state of the brightness adjustment may make images difficult to see eThe quality of computer signals may have an effect on the unit s quality We recommend you to select computers with high quality video signal output elnstantaneous voltage change This unit may have defects upon momentary voltage drops of power supply caused by incidents such as lightning strikes For the countermeasure for it we recommend you to use devices such as uninterruptive power supply Disposal of the unit Do not dispose of the unit with general wastes Do not dispose of the unit together with general wastes The unit contains mercury in its CCFT Cold cathode fluorescence tube Follow your local regulations or rules upon disposal of the unit Limitation of Liability eKodak is not liable for damages arising from fire earthquake actions taken by any third party any other a
10. ccident any intended action negligence or misuse by user or use under such abnormal circumstances eKodak is not liable for incidental damages including but not limited to loss of business profits disruption of buisiness change or loss of saved data arising from use of this product or inability to use this product eKodak is not liable for damages arising from use not described in the user s manual eKodak is not liable for damages arising from malfunctions caused by combination of connecting devices eKodak is not liable for damages concerning time limit or buisiness reduction or delay of profits information and other economic hardship arising from use of software provided by Kodak for use of this product even if Kodak has been advised of the possibility of such damages Windows and MS DOS are registered trademarks or brands of Microsoft Corporation within the United States and in other countries VESA is a brand of Video Electronics Standard Association DirectColorCal is a registered brand of Eastman Kodak Company The names of companies and products are registered brand names or brand names Auxiliaries Confirm the auxiliaries listed below are included O AC adapter 1 O USB cable 1 CO Power supply cord 3P wall type 1 O User s Manual this manual 1 O DVI DVI cable 1 O Communication cable 1 x We recommend you to keep the packing box for transportation and the like In ca
11. en the exclusive AC adapter used External dimensions and Mass including tilt stand Unit only 367 x 523 x 220 mm W x H x D when horizontal approx 11 kg When packed 470 x 685 x 345 mm W x H x D approx 17 kg Calibration system option Color sensor made by MINOLTA DirectColorCal software Color sensor attachment International standards UL2601 1 cUL2601 1 CSA C22 2 N601 1 TUV GM EN60601 1 BSMI Class A MIC FCC Class A VCCI Class A MDD CE EN60601 1 EN60601 1 2 2001 EN55011 eThe specifications and appearance will be changed for improvement without notice 20 External Dimensions Portrait Shorter side at the top 367 lt m Front Left side view Landscape longer side at the top 476 175 m aiH 468 220 ml M Front Left side view 21 Technical Support Read Failure Diagnosis Pg 18 carefully and check them yourself In case of having abnormalities on your driver stop operating unplug the AC cable from the outlet and consult dealer Do not repair by yourself It is very dangerous Consult your dealer for repair Use the product s packing and packing materials to send the product Carefully place the unit in the packing and keep the face from touching any packing materials The panel surface touching the materials during transportation will cause damage on the panel surface we will not cover the damage Contact Tec
12. enerates to pile up X In case of any liquid entering inside the unit which may inside immediately turn off the lead to generation of fever Re power disconnect the plug from and ignition Also falling may outlet and contact shops cause injuries W Person or properties could be at risk Caution damaged which may cause adapter to this unit generation of fever and ignition eDuring a long hour use take a break 10 to 15 minutes every one hour for your eyes Otherwise it may cause eyestrain rt Ne A eDo not put the unit in such place where it is subject to direct sunlight or n any heating device f SO The cabinet and or components may be eDo not use the attached AC adapter to other devices models with attached AC adapter It may lead to generation of fever and or fire Also do not use any other AC Abnormal circumstances A A Warning ein case of any abnormality such as odor sound and overheat taking place immediately turn off the power and disconnect the plug from Q e outlet fo Continuance of using the unit under such condition may lead to electric shock and or fire Immediately turn off the power disconnect the plug from outlet and contact shops eln the event of thunder immediately turn off the power and disconnect the plug from outlet Lightning strikes may cause Q e electric shock and or fire F w Va A ein the event of broken panel and leaking li
13. gnal Connector Pin Signal 1 T M D S Data2 2 T M D S Data2 3 T M D S Data2 4 Shield 4 T M D S Data4 5 T M D S Data4 6 DDC Clock 7 DDC Data 8 NC 9 T M D S Data1 10 T M D S Data1 11 T M D S Data1 3 Shield 12 T M D S Data3 13 T M D S Data3 14 5V Power 15 Ground 16 Hot Plug Detect 17 T M D S Data0 18 T M D S Data0 19 T M D S Data0 5 Shield 20 T M D S Data5 21 T M D S Data5 22 T M D S Clock Shield 23 T M D S Clock 24 T M D S Clock 17 Failure Diagnosis Check the followings before requesting repair Power doesn t turn on Is the power cord POWER indicator doesn t connected light Is the power switch ON a Connect the power cord see Pg 12 b Turn the power switch on The screen is not a Is the signal cable properly a Properly connect the displayed connected appropriate signal cable see b Is the POWER indicator Pg 12 orange b Disengage the power saving c Is the computer on mode c Turn the computer on Screen doesn t properly Is the Graphics card a Properly install according to CIETIE properly installed onto the the Graphics card computer per the operating Operating Manual manual The entire screen is not Is the Graphics card a Properly set it up according displayed properly set up to the Exclusive Graphics card Operating Manual
14. hnical Support Consult your dealer for technical support Notes for User s Manual Copying any part or all of this manual without authorization is prohibited The content of this manual will be subject to change without notice Although this was made carefully please contact us if any unclear points mistakes or parts left out 22 Printed in Japan Recycled Paper KS EASTMAN KODAK COMPANY Rochester NY 14650 U S A www kodak com PZZ11 885 MDL2106A 1A 031225
15. ing the angle holding the bottom of the LCD panel and turning the panel 11 3 Rotating the LCD Panel When setting the color LCD monitor to horizontal display landscape orientation lift the LCD panel to the top of the tilt stand as shown in the figure below and rotate it by 90 degrees Procedure Tilt the LCD panel upward Perform this procedure before sliding the panel upward Lift the LCD panel to the top The tilt stand will slide about 60mm Rotate the LCD panel by 90 degrees Replace the LCD panel to the bottom while in the horizontal position landscape orientation 12 Connection Method 1 Confirm that the computer is turned off 2 Connect the computer s DVI digital video output connector and the LCD monitor s SIGNAL with the provided cable When connecting the cable do not forget to tighten the screw of the cable 3 Connect the DC output connector of the attached AC adapter to the LCD monitor s DC IN 12V and the power plug to an inlet 4 Turn on the LCD monitor and computer Confirm that the monitor displays images Example of Connection Computer Back of monitor E Q I A Graphics card OO 68 comme eGo 15r 4a C ee ee ome e fall SIGNAL DC IN 12V DVI cable AC adapter Power cable J To the power outlet A moD Make sure you use the auxiliary AC adapter 13 Handling the cable cover 1 Removi
16. ng the cable cover Lifting the hook at the top of the cover slowly remove the cable cover and expose the cable holders Hook Cable cover 2 Installing the cable cover Secure cables to the cable holders on the back of the stand Refer to the figure on the right Install the cable cover It is free to arrange cable settings according to environment A Caution eDo not give signal cables or the power cord a strong pull Signal cable eA strong pull may cause damage on the connection part inside the USB cable monitor where high definition processing technology is applied It also may result in felling the monitor AC Adapter and damaging on the LCD panel In the worst case scenario the LCD panel will be broken 14 Antitheft security device slot This product has loaded an antitheft security device slot compliant with MicroSaver Security System of Kensington on the back of the color LCD monitor MicroSaver security System can be purchased at PC supply shops Antitheft security device slot Kensington is a registered brand of Kensington 15 Reference DDC This unit has loaded a function compliant with DDC 2B a VESA standard This function reads into the set data written in the color LCD monitor internal device in advance on startup of Windows 95 98 Me 2000 or Windows XP and sets the detailed information of the color LCD monitor in the system file in order to achieve Plug amp Play
17. olor LCD monitor can automatically be calibrated ePortrait landscape orientation The LCD panel can be rotated by 90 degrees from portrait to landscape orientation The display switch between portrait and landscape is made by internal hardware rotation function ePower management This unit has loaded the power management system The power management mode functions when either horizontal or vertical signals or both disappears and it reduces power consumption to less than 10W eVESA standard wall arm mountings The units is compliant with VESA s 100mm pitch hanging tools The tilt stand is detachable the unit can be set according to users environment such as arm mounting Portrait display is available only when a graphics card can display 1536 x 2048 When the monitor is used as a suspention type please use a hanging arm able to support a monitor weighing 10kg or more eObtaining standards The product observes worldwide medical standards such as UL2601 1 How to Operate 1 Names and Functions of Each Part Operating Section Power switch This turns the power of the color LCD monitor ON and OFF Power indicator LED Status OFF Power Status Color LCD Monitor Status Power is OFF The brightness stabilizing circuit is ON and the brightness is stable Green lamp is lit The brightness stabilizing circuit is ON and the brightness is being adjusted Orange lamp is lit Power saving mode
18. quid crystal do not inhale swallow or touch the liquid crystal It may cause you getting poisoned and or having a skin irritation If you put it in your mouth immediately gargle with water and go to see a doctor to Warning get a checkup In case of taking it on your skin and or cloth wipe it off with alcohol and rinse them SS Maintenance Vs XX A Warning eDo not remove the cabinet There are high voltage parts inside that may lead to electric shock X Ask shops for adjustments a and inspection G eDo not remodel or repair It may lead to fire electric shock or injuries a Ne A Caution eClean inside the monitor once a year The dust inside the unit may lead to fire X Ask shops for adjustments and a inspection eDisconnect the plug from outlet when not using the unit for a prolonged period Disconnect the plug from outlet when not using for a prolonged period for such as trip eEven if the unit is properly used it may have an effect on radio and or TV reception upon the condition of electric wave If it is the case give caution to the followings 1 Ensure enough space between the unit and radio and or TV 2 Connect the unit and radio and or TV to separate outlets eColor LCD monitor may have tiny spots and unevenness according to the displaying conditions but they are not any sign of failure eLCD panel is produced with high definition technology but there m
19. se of transporting and packing the unit in the packing box carefully place it keeping its panel from touching any objects Features eUse of a 20 8 inch 53cm QXGA ultra high definition color LCD panel A large screen size and clear image is obtained by using a 20 8 inch diagonal 53cm QXGA 2048 x 1536 ultra high definition color LCD panel To display the maximum resolution on DV3MC a graphics card that can display 2048 x 1536 or 1536 x 2048 is necessary eHigh intensity high contrast The 3 million pixels for displaying various medical images can be displayed at high resolution 300 1 high contrast and wide viewing angle Maximum brightness 160cd m 120cd m when the brightness stabilizing circuit is operating Viewing angle 85 degrees both vertically and horizontally eDVI digital visual interface Employing DVI digital visual interface has achieved less deterioration of video signal and high definition image display compared to conventional analog interfaces eBrightness stability In order to restrain the brightness drift arising from the LCD backlight the unit is installed with our unique automatic brightness stabilizing circuit A Sentinel As a result the brightness drift is held down following introduction of power Thus stable brightness is observed over a long period of time eCalibration function With the optional color sensor and DirectColorCal software luminance and gradation gamma curve of the c
Download Pdf Manuals
Related Search