Havis-Shields LED Gooseneck Map Light User's Manual
Contents
1. Havis Shields EQUIPMENT CORPORATION LED Gooseneck Map Light Installation Instructions Warning Please read all instructions and warnings prior to installation of the LED Gooseneck Map Light TOOLS REQUIRED Phillips Screw Driver Wire Cutter Stripper HARDWARE Supplied in Kit Qty Description Qty Description 2 6 Machine Screw 2 6 Split Lock Washer 2 6 Thread Forming Screw 2 6 Flat Washer INSTALLATION 1 Mounting e A drill template is provided on the back of this instruction sheet Detach the template position it on the desired location for installation and mark drill locations Caution Before drilling holes ensure that the mounting surfaces are clear and that the screws will not damage the internal parts of the console or vehicle Caution Ensure that the Gooseneck Map Light is installed in areas recommended by the vehicle manufacturer outside of the airbag zone e Drill the mounting holes e Remove the template prior to installing the fixture Secure the base of the fixture in position using the supplied machine screws and washers e The supplied super clip may be used to secure the gooseneck in position if desired Caution Thread forming screws are supplied for alternate installations requiring the fixture to be mounted from above lf the fixture needs to be disassembled for such installation please note that this will void your warranty 2 Wiring e Connect the black lead to negative ground e2. Light Inst 8 08 doc
3. Connect the red lead to hot power Note It is recommended to install an in line fuse holder and 1 Amp fuse on the red hot lead e Test the light for proper operation Consolidator Kwik Raze Collins Dynamics Kwik Kit PrisonerTransports K 9Transports 75 Jacksonville Rd P O Box 2099 Warminster PA 18974 800 524 9900 215 957 0720 P 215 957 0729 F www Havis com 3 Operation e Power is supplied through a three position switch The center position is off and the up and down positions provide red or white light 4 Troubleshooting e Use a voltmeter to ensure that the fixture is receiving adequate power The light requires nominally 12 VDC for correct operation Correct any faults found e A bad ground connection can cause improper operation Use a negative wire instead of connecting power to the vehicle chassis to avoid any ground issues e The light will not be able to turn on 1f polarity is reversed 12 VDC P ee 1A Fuse Recommended E HOT RED To Switch Circuit and COMMON BLACK LEDs _User Supplied a ae Ground Connector use tuse nolder an connector are not supplied by Havis Shields Optional EEE A O EN E ee ee Se ee ee ee ee ee ee Clip Here ne TEMPLATE EN 0 16 5 32 Drill 0 50 1 2 Drill AIS l Na ch wT Mounting Holes 2132 1 23 32 H Cons Misc LED Map
Download Pdf Manuals
Related Search