Harbor Freight Tools 67032 User's Manual
Contents
1. symbology vents under the charger Symbolo Place the charger on a stable solid Double Insulated nonflammable surface such as a Canadian Standards Association stable metal workbench or concrete floor at least 1 foot away from all SP flammable objects such as drapes or walls Keep a fire extinguisher and a Underwriters Laboratories Inc smoke detector in the area Fre quently monitor the charger and Volts Alternating Current battery while charging 5 This product is not a toy Keep it out OA ampere of reach of children No Load Revolutions per Minute No xxxx min RPM 6 People with pacemakers should consult their physician s before use Electromagnetic fields in close prox imity to heart pacemaker could cause pacemaker interference or pacemak er failure In addition people with pacemakers should e Avoid operating alone e Properly maintain and inspect to avoid electrical shock 7 The warnings precautions and in structions discussed in this instruction manual cannot cover all possible con ditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator SAVE THESE INSTRUCTIONS Extension Cords Note Extension cords must not be used with this item s charger SKU 67032 For technical questions please call 1 800 444 3353 Page 4 SPECIFICATIONS Battery2. Bulb 12 Figure 2 3 To change the bulb a Unthread the Lens Retainer 15 counterclockwise and carefully re move the Lens 14 Reflector 13 and spent Bulb 12 noting which side of the lens faces the Reflector b Slide the spare bulb 12 included out of its slot in the Lamp Head Housing 7 and place it in the Spring 11 in the center of the Lamp Head Housing c Replace the Reflector the Lens and the Lens Reflector Note Purchase a new spare bulb to store inside the Lamp Head Housing for future use Page 6 PARTS amp ASSEMBLY DIAGRAM Part Description Qty Part Description Qty 6 Rotation Limiting Plate 1 8 ClampPlate 1 9 Wiring Board 1 Record Product s Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are listed and shown for illustration purposes only and are not avail able individually as replacement parts SKU 67032 For technical questions please call 1 800 444 3353 Page 7 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE
3. Operating Instructions Attach the fully charged Battery Pack sold separately to the base of the Flashlight 2 Slide the Power Switch 2 to ON by sliding it towards the Lamp Head Housing 7 3 Adjust the direction of the light by pivoting the Lamp Head Housing 7 of the light clockwise up to 90 4 Turn off the Flashlight and disconnect its power supply after use Clean then store the tool indoors out of chil dren s reach Page 5 MAINTENANCE AND SERVICING Procedures not specifically explained in this manual must be performed only by a qualified technician TO PREVENT AWARNING serious INJURY FROM ACCIDENTAL OPERATION Turn the Power Switch of the tool to its OFF position and disconnect the tool from its battery pack before performing any inspection maintenance or cleaning procedures TO PREVENT SERIOUS INJURY FROM TOOL FAILURE Do not use damaged equipment Cleaning amp Maintenance 1 BEFORE EACH USE inspect the general condition of the tool Check for loose hardware misalignment or binding of moving parts cracked or broken parts damaged electrical wir ing and any other condition that may affect its safe operation 2 AFTER USE wipe external surfaces of the tool with clean cloth SKU 67032 For technical questions please call 1 800 444 3353 Lamp Head Housing 7 Spare Bulb 12 Reflector 13 Lens 14 Lens Retainer 15 i Spring 11
4. another Shorting the battery terminals to gether may cause burns or a fire 67032 For technical questions please call 1 800 444 3353 d Under abusive conditions liquid may be ejected from the battery avoid contact If contact acciden tally occurs flush with water If liquid contacts eyes additionally seek medical help Liquid ejected from the battery may cause irritation or burns Service a Have your Flashlight serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the Flashlight is maintained Flashlight Safety Warnings Maintain labels and nameplates on the tool These carry important safety information If unreadable or miss ing contact Harbor Freight Tools for a replacement Avoid unintentional starting Prepare to begin work before turning on the tool Do not leave the tool unattended when it is attached to a battery pack Turn off the tool and disconnect it from its battery pack before leaving The battery charger gets hot during use The charger s heat can build up to unsafe levels and create a fire hazard if it does not receive adequate ventilation due to an electrical fault or if it is used in a hot environment Do not place the charger on a flam mable surface Do not obstruct any vents on the charger Especially avoid placing the charger on car pets and rugs they are not only Page 3 flammable but they also obstruct
5. be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the com plaint must accompany the merchandise If our inspection verifies the defect we will ei ther repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return re paired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353 SKU 67032 For technical questions please call 1 800 444 3353 Page 8
6. symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death DANGER indicates 4 DANGER a hazardous situation which if not avoided will result in death or serious injury AWARNING WARNING indicates a hazardous situation which if not avoided could result in death or serious injury ACAUTION CAUTION used with the safety alert symbol indicates a hazardous situation which if not avoided could result in minor or moderate injury SKU 67032 For technical questions please call 1 800 444 3353 NOTICE is used to NOTICE address practices not related to personal injury CAUTION without CAUTION the safety alert symbol is used to address practices not related to personal injury General Flashlight Safety Warnings WARNING Read all safety warnings and instructions Failure to follow the warnings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference Work area safety a Keep work area clean and well lit Cluttered or dark areas invite acci dents b Keep children and bystanders away while operating any tool Distractions can cause you to lose control 2 Electrical safety Do not expose tools to rain or wet conditions Water entering the Flashlight will increase the risk of electric shock 3 Personal safety a Stay
7. DRILL L MASTER 18V CORDLESS WORKLIGHT KeX 1167032 SET UP AND OPERATING INSTRUCTIONS NOTE BATTERY PACK 67029 SOLD SEPARATELY Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our website at http www harborfreight com Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL Copyright 2009 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included For technical questions or replacement parts please call 1 800 444 3353 SAVE THIS MANUAL Keep this manual for the safety warn ings and precautions assembly operat ing inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference IMPORTANT SAFETY INFORMATION In this manual on the labeling and all other information provid ed with this product This is the safety alert
8. PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO LIMITED 90 DAY WARRANTY Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this prod uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESS LY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must
9. Type 18V NiCd SKU 67029 10W incandescent XPR 18 Spare Bulb in Lamp Head Housing UNPACKING When unpacking make sure that the item is intact and undamaged If any parts are missing or broken please call Harbor Freight Tools at 1 800 444 3353 as soon as possible INSTRUCTIONS FOR PUTTING INTO USE Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product Note For additional information regarding the parts listed in the following pages refer to the Parts List and Assembly Diagram near the end of this manual Functions Lamp Head Housing 7 Me ower Switch 2 Lens Retainer 15 Battery Pack SKU 67029 gt Sold Separately Figure 1 SKU 67032 For technical questions please call 1 800 444 3353 OPERATING INSTRUCTIONS Tool Set Up TO PREVENT AWARNING SERIOUS INJURY FROM ACCIDENTAL OPERATION Turn the Power Switch of the tool to its OFF position and disconnect the tool from its Battery Pack before performing any inspection maintenance or cleaning procedures Charge the Battery The Charger SKU 67031 and Rechargeable Battery Pack SKU 67029 are sold separately Please refer to the 67031 Charger manual for important safety warnings and proper instructions on charging tool WARNING Do NOT use a different Charger or Battery Pack to power this tool General
10. alert watch what you are do ing and use common sense when operating any tool Do not use a tool while you are tired or under the influence of drugs alcohol or medication Page 2 b a a O SKU Prevent unintentional starting Ensure the switch is in the off position before connecting to bat tery pack picking up or carrying the tool Flashlight use and care Do not use the Flashlight if the switch does not turn it on and off Disconnect the battery pack from the Flashlight before making any adjustments changing acces sories or storing the Flashlight Such preventive safety measures reduce the risk of starting the Flash light accidentally Maintain the Flashlight Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the Flashlight s operation If damaged have the Flashlight repaired before use Battery tool use and care Recharge only with the charger specified by the manufacturer A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack Use tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire When battery pack is not in use keep it away from other metal ob jects like paper clips coins keys nails screws or other small metal objects that can make a connec tion from one terminal to
Download Pdf Manuals
Related Search