Echo HC-225 User's Manual
Contents
1. Moving parts can amputate fingers or cause severe injuries Keep hands clothing and loose objects away from all openings e ALWAYS stop engine disconnect spark plug and make sure all moving parts have come to a complete stop before removing obstructions clearing debris or servicing unit e DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit e NEVER reach into any opening while the engine is running Moving parts may not be visible through openings WARNING Check fuel system for leaks due to fuel tank damage especially if the unit is dropped If damage or leaks are found do not use unit otherwise serious personal injury or property damage may occur Have unit repaired by an autho rized servicing dealer before using EMISSION CONTROL EXHAUST amp EVAPORATIVE EPA 2010 and Later The emission control system for the engine is EM TWC Engine Modification and 3 way Catalyst and for the fuel tank the Control System is EVAP Evaporative Emissions or N for nylon tank Evaporative emission may be applicable to California models only EMISSION CONTROL INFORMATION ENGINE FAMILY GREHXS 0454KA DISPLACEMENT 45 0cc EMISSION COMPLIANCE PERIOD 300 HOURS THIS ENGINE MEETS U S EPA EXH EVP REGS FOR MODEL YEAR amp REFER TO OWNER S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS Emission Control Label located on Engine EXAMPLE ONLY information on label varies by FA2. MECHO Hedge Clipper Operator s Manual MODEL HC 225 WARNING DANGER WARNING A The muffler or catalytic muffler The engine exhaust from this and surrounding cover may become product contains chemicals known sniliinhlin extremely hot to the State of California to cause cancer birth defects or other Always keep clear of exhaust and muffler area otherwise serious personal injury may occur reproductive harm A WARNING Read rules for safe operation and all instructions carefully ECHO provides this Operator s Manual and a Safety Manual Both must be read and under stood for proper and safe operation X750011532 X7502256602 03 10 2 MECHO INTRODUCTION Welcome to the ECHO family This ECHO product was designed and manufactured to provide long life and on the job dependability Read and understand this manual You will find it easy to use and full of helpful operating tips and SAFETY messages THE OPERATOR S MANUAL Read and understand this manual before operation Keep it in a safe place for future reference It contains specifications and information for operation starting stopping maintenance storage and assembly specific to this product THE SAFETY MANUAL Read and understand this manual before operation Keep it in a safe place for future reference It explains possible hazards involved with HECHO the use of this product and what measures you should take to make
3. their use safer TABLE OF CONTENTS Introduction The Operator s Manual The Safety Manual Manual Safety Symbols and Important Information3 International Symbols Personal Conditions and Safety Equipment Equipment Emissions Control Description Contents Assembly Operation Starting Cold Engine Starting Warm Engine Stopping Engine Hedge Trimming Copyright 2010 By Echo Incorporated All Rights Reserved Maintenance Skill Levels Maintenance Intervals Air Filter Fuel Filter Spark Plug Cooling System Exhaust System Carburetor Adjustment High Altitude Operation Lubrication Sharpening Blades Blade Adjustment Troubleshooting Storage Specifications Warranty Statements Servicing Information Parts Serial Number Service ECHO Consumer Product Support Warranty Card Additional or Replacement Manuals Specifications descriptions and illustrative material in this literature are as accurate as known at the time of publication but are subject to change without notice Illustrations may include optional equipment and accesso ries and may not include all standard equipment SAFETY HEDGE CLIPPER OPERATOR S MANUAL MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION Throughout this manual and on the product itself you will find safety alerts and helpful informational messages pre ceded by symbols or key words The following is an explanation of those symbols and key words and what they mean
4. 20W Engine Oil lubrication 50 50 mixture of kerosene and 20W oil cleaning A WARNING Hedge Clipper blades are very sharp Touching them may lead to severe personal injury Avoid touching blades whenever possible and always wear gloves to protect hands 1 Move stop switch to stop position 2 Disconnect spark plug wire from spark plug ih Ar RN YO RAER ARO VN DUU 3 Brush loose debris from blade and coat both sides of blade with the 50 50 cleaning mixture Ah RITE 4 Allow cleaning mixture to soften the remaining gummy residue then wipe it from the blade 5 Apply clean oil to the entire length of the blade Be certain the blade bolts are lubricated 6 Wipe excess oil from the blade before putting the unit back in ser vice 22 MECHO Gear Box Assembly Level 1 Tools required Grease Gun P N 91016 Clean rag Parts required POWER BLENDX 8 oz P N 91014 or Lithium Base Grease 1 Clean all loose debris from gear box 2 Remove plug A and check level of grease 3 Add grease if necessary DO NOT over fill SHARPENING BLADES Level 3 Tools required Flat file Screwdriver Parts required None A WARNING Hedge Clipper blades are very sharp Touching them may lead to severe personal injury Avoid touching blades whenever possible and always wear gloves to protect hands 1 Disconnect spark plug wire 2 Slide blades to allow file clearance using slots on bottom of
5. 96 0 kPa To maintain proper engine operation and emis sion compliance above 1 100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer IMPORTANT If the engine is adjusted for operation above 1 100 feet ASL the carburetor must be re adjusted when operating the engine below 1 100 feet ASL otherwise severe engine damage may result Level 2 Tools required Screwdriver Tachometer ECHO P N 99051130017 Parts required None NOTE Every unit is run at the factory and the carburetor is set in compli ance with emission regulations Carburetor adjustments other than idle speed must be performed by an authorized ECHO dealer 1 Before adjusting the carburetor clean or replace the air filter and spark arrestor screen 2 Start engine and run for several minutes to reach operating tem perature 3 Check idle speed and reset if necessary If a tachometer is avail able idle speed screw A should be set to the specification found on page 26 Specifications of this manual Turn idle screw A clockwise to increase idle speed counter clockwise to decrease idle speed A WARNING When carburetor adjustment is completed the cutting attachment should not move at idle otherwise serious personal injury may result HEDGE CLIPPER 2 1 OPERATOR S MANUAL LUBRICATION Blades Level 1 Tools required Clean rag 25 or 50 mm 1 or 2 in cleaning brush Parts required
6. serious injury or death Read the Manuals e Provide all users of this equipment with the Operator s Manual and Safety Manual for instructions on Safe Operation Clear the Work Area e Spectators and fellow workers must be warned and children and animals prevented from coming nearer than 15 m 50 ft while the unit is in use Keep a Firm Grip e Always hold the throttle handle and support handle with thumbs and fingers encircling the handles Keep a Solid Stance e Maintain footing and balance at all times Do not stand on slippery uneven or unstable surfaces Do not work in odd positions or on lad ders Do not over reach Avoid Hot Surfaces e Keep exhaust area clear of flammable debris Avoid contact during and immediately after operation A WARNING Never perform blade maintenance procedures while engine is run ning 9 6 MECHO EQUIPMENT CHECK WARNING Use only ECHO approved attachments Serious injury may result from the use of a non approved attachment combi nation ECHO INC will not be responsible for the failure of cutting devices attachments or accessories which have not been tested and approved by ECHO Read and comply with all safety instructions listed in this manual and safety manual e Check unit for loose missing nuts bolts and screws Tighten and or replace as needed e Check that the cutting attachment is firmly attached and in safe operating condition WARNING
7. to you DANGER The safety alert symbol accompanied by the word DANGER calls attention to an act or condition which WILL lead to serious personal injury or death if not avoided WARNING The safety alert symbol accompanied by the word WARNING calls attention to an act or condi tion which CAN lead to serious personal injury or death if not avoided CAUTION The safety alert symbol accompanied by the word CAUTION calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided INTERNATIONAL SYMBOLS Symbol Symbol Symbol form shape description application Symbol form shape description application Read and understand Fuel and oil mixture owners manual Wear eyes ears and head protection _ Finger Severing DO NOT SMOKE NEAR FUEL o Wear hand protection Use two handed Choke Control omen Ignition Cold Start ON OFF Position Choke Closed Choke Control Run Position Choke Open out guards in place Do not operate with CIRCLE AND SLASH SYMBOL This symbol means the specific action shown is prohibited Ignoring these prohi bitions can result in serious or fatal injury NOTE This enclosed message provides tips for use care and maintenance of the unit IMPORTANT The enclosed message provides information neces sary for the protection of the unit Symbol Symbol Symbol form shape description application Symbol form shape de
8. and your experience will determine the frequency of required maintenance MAINTENANCE PROCEDURE NOTES 1 Apply POWER BLENDX Grease every 25 hours of use 2 Inspect blade and clean and sharpen as needed Lubricate blades periodically during use 3 Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity All recommendations to replace are based on the finding of damage or wear during inspection 16 ECHO AIR FILTER Level 1 Tools required 25 or 50 mm 1 or 2 in cleaning brush Parts required REPOWER AIR amp FUEL FILTER KIT 1 Close choke Cold Start Position tL This prevents dirt from entering the carburetor throat when the air filter is removed Brush accumulated dirt from air cleaner area 2 Remove air filter cover Brush dirt from inside cover 3 Remove air filter and lightly brush debris from filter Replace filter if it is damaged fuel soaked very dirty or the rubber sealing edges are deformed 4 If filter can be reused be certain it e Fits tightly in the air filter cavity e Is installed with the original side out 5 Install air filter cover NOTE Carburetor adjustment may be needed after air filter cleaning re placement FUEL FILTER Level 1 Tools required 200 250 mm 8 10 in length of wire with one end bent into a hook clean rag funnel and an approved fuel container Parts required REPOWER AIR amp FUEL FILTER K
9. blades Do not pry against cutting edges 3 Follow the original shape and file each cutting edge carefully to avoid damage to adjacent teeth Maintain 6 mm 25 in radius at base of each tooth IMPORTANT If a power grinder is used DO NOT allow blade to over heat 4 Lubricate blades See Lubrication 6 mm A 25 in 456 5 Connect spark plug wire Radius BLADE ADJUSTMENT Level 2 Tools required 2 10mm Sockets and Extensions Parts required None A WARNING Hedge clipper blades are very sharp Touching them may lead to severe personal injury Use a socket and extension when adjust ing blade bolts or blade locknuts in order to keep hands at a safe distance from sharp blades IMPORTANT Blades should only be removed and reinstalled by an Authorized ECHO Servicing Dealer otherwise premature wear or internal damage may occur 1 Tighten blade bolts until snug then loosen blade bolts 1 2 turn 2 Hold blade bolts from turning using 10 mm socket and tighten blade lock nuts with other 10 mm socket NOTE Locking ability of Hedge Clipper blade lock nuts will diminish each time they are removed Replace if turning resistance 1s not felt when installing locknuts HEDGE CLIPPER OPERATOR S MANUAL 23 24 UUECHE TROUBLESHOOTING ENGINE PROBLEM TROUBLESHOOTING CHART rrome cmo sme cme O memey Fuel at carburetor No fuel at carburetor Fuel strainer clogged Clean or replac
10. center Remove muffler A and heat shield B 3 Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port IMPORTANT Never use a metal tool to scrape carbon from the exhaust port Do not scratch the cylinder or piston when cleaning the exhaust port Do not allow carbon particles to enter the cylinder 4 Inspect heat shield and replace if damaged 5 Install heat shield and muffler 6 Tighten muffler mounting bolts or nuts to 80 95 inelbf 90 110 kgf cm 7 Install engine cover and attach spark plug lead 8 Start engine and warm to operating temperature 9 Stop engine and re tighten mounting bolts or nuts to specifica tions CARBURETOR ADJUSTMENT WARNING The blades must not move at idle otherwise serious personal injury may result Periodic carburetor adjustment may be necessary to as sure blades do not move at idle If blades move readjust carburetor according to these instructions or see your ECHO Dealer Engine Break In New engines must be operated a minimum duration of two tanks of fuel break in before carburetor adjustments can be made During the break in period your engine performance will increase and exhaust emissions will stabilize Idle speed can be adjusted as required 20 MECHO High Altitude Operation This engine has been factory adjusted to maintain satisfactory starting emission and durability performance up to 1 100 feet above sea level ASL
11. cooled engine oil Use 89 Octane unleaded Do not use fuel containing methyl alcohol more than 10 ethyl alcohol or 15 MTBE Do not use alternative fuels such as E 15 or E 85 Power Blend X Premium Universal 2 Stroke Oil 0 5 lit 16 9 fl oz Automatic Recoil Starter Single Edge 725 mm 28 5 in 35 mm 1 4 in 23 mm 0 91 in 25 4 mm 1 in 13 mm 1 2 in 3 000 3 600 This spark ignition system complies with the Canadian standard ICES 002 HEDGE CLIPPER 27 OPERATOR S MANUAL WARRANTY STATEMENTS ECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01 01 2010 ECHO S RESPONSIBILITY ECHO Incorporated s Limited Warranty provides to the original purchaser that this ECHO product is free from defects in material and workmanship Under normal use and maintenance from date of purchase ECHO agrees to repair or replace at ECHO s discretion any defective product free of charge at any authorized ECHO servicing dealer within listed below application time periods limitations and exclusions THIS LIMITED WARRANTY IS ONLY APPLICABLE TO ECHO PRODUCTS SOLD BY AUTHORIZED ECHO DEALERS IT IS EXTENDED TO THE ORIGINAL PURCHASER ONLY AND IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS EXCEPT FOR EMISSION RELATED PARTS Repair parts and accessories replaced under this warranty are warranted only for the balance of the original unit or accessory warranty period Any damage caused by improper installation or impr
12. performance problems loss of power overheating fuel vapor lock and unintended machine operation including but not limited to improper clutch engagement Alternative fuels may also cause premature deterioration of fuel lines gaskets carburetors and other engine components Fuel Requirements Gasoline Use 89 Octane R M 2 mid grade or higher gasoline known to be good quality Gasoline may contain up to 10 Ethanol grain alcohol or 15 MTBE methyl tertiary butyl ether Gasoline containing methanol wood alco hol is NOT approved Two Stroke Oil A two stroke engine oil meeting ISO L EGD ISO CD 13738 and J A S O FC FD Standards must be used Echo brand premium Power Blend X Universal 2 Stroke Oil meets these standards Engine problems due to inadequate lubrication caused by failure to use an ISO L EGD ISO CD 13738 and J A S O FC FD certified oil such as Echo premium Power Blend X will void the two stroke engine warranty IMPORTANT Echo premium Power Blend X Universal 2 Stroke Oil may be mixed at 50 1 ratio for application in all Echo en gines sold in the past regardless of ratio specified in those manuals HEDGE CLIPPER 1 1 OPERATOR S MANUAL Handling Fuel A DANGER Fuel is VERY flammable Use extreme care when mixing storing or handling or serious personal injury may result e Use an approved fuel container e DO NOT smoke near fuel e DO NOT allow flames or sparks near fuel e Fuel tank
13. to distribute the oil inside the engine 6 Install blade cover on blades C Observe the piston location through the spark plug hole Pull the recoil handle slowly until the 7 Tighten all the screws and nuts piston reaches the top of its travel and leave it there 10 Install the spark plug do not connect ignition cable IMPORTANT Always store and transport hedge clippers in a stable horizontal position Support gear case and cutting blades to prevent excessive flexing which may cause damage to these components Always install blade cover when transport ing or storing unit 26 MECHO SPECIFICATIONS Exhaust System Carburetor Maximum Diameter Cut Soft Material Woody Material Idle Speed RPM Clutch Engagement Speed RPM Wide Open Throttle RPM IMPORTANT 1 086 mm 42 8 in 251 mm 9 9 in 205 mm 8 07 in 5 54 kg 12 2 Ib Air cooled two stroke single cylinder gasoline engine 21 2 cc 1 29 cu in 32 2 mm 1 96 in 26 0 mm 1 02 in Spark arrestor muffler or spark arrestor muffler with catalyst Zama diaphragm model w purge pump Flywheel Magneto Capacitor discharge ignition NGK BPMR 8Y Gap 0 65 mm 0 026 in Mixed Fuel gasoline and oil 50 1 Power Blend X ISO L EGD ISO CD 13738 and J A S O M345 FC FD two stroke air
14. ACEMENT MANUALS Replacement Operator Safety Manuals and Parts Catalogs are available from your ECHO dealer or at www echo usa com or by contacting ECHO Inc 400 Oakwood Road Lake Zurich IL 60047 800 673 1558 Always check the ECHO Web Site for updated information Safety Videos are available from your Echo dealer A 5 00 shipping charge will be required for each video MWMECHO ECHO INCORPORATED 400 Oakwoop RoaDpD LAKE ZURICH IL 60047 www echo usa com S85213001001 S85213999999
15. ARNING During operation the muffler or catalytic muffler and surrounding cover become hot Always keep exhaust area clear of flammable debris during transportation or when storing otherwise serious personal injury may result Long Term Storage over 30 days Do not store your unit for a prolonged period of time 30 days or longer without performing protective storage mainte nance which includes the following 1 Store unit in a dry dust free place out of the reach of children A WARNING Hedge Clipper blades are very sharp Touching them may lead to severe personal injury Avoid touching blades whenever possible and always wear gloves to protect hands A DANGER Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark otherwise serious personal injury may result 2 Place the stop switch in the OFF position 8 Drain the fuel tank completely and pull the recoil starter handle several times to remove fuel from the 3 Remove accumulation of grease oil dirt and debris carburetor from exterior of unit 9 Remove the spark plug and pour 7cc 1 4 oz of fresh 4 Perform all periodic lubrication and services that are clean two stroke engine oil into the cylinder through required the spark plug hole 5 Apply clean oil to the entire length of the blade Be A Place a clean cloth over the spark plug hole certain the blade bolts are lubricated B Pullthe recoil starter handle 2 3 times
16. IT DANGER Fuel is VERY flammable Use extreme care when mixing storing or handling 1 Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank 2 Use the fuel line hook to pull the fuel line and filter from the tank 3 Remove the filter from the line and install the new filter HEDGE CLIPPER 1 7 OPERATOR S MANUAL SPARK PLUG Level 2 Tools required T wrench Feeler gauge Soft metal brush Parts required REPOWER Tune Up Kit IMPORTANT Use only NGK BPM 8Y spark plug BPMR 8Y in Canada other wise severe engine damage may occur 1 Remove spark plug and check for fouling worn and rounded center electrode 2 Clean the plug or replace with a new one DO NOT sand blast to clean Remaining sand will damage engine 3 Adjust spark plug gap by bending outer electrode 0 026 in 4 Tighten spark plug to 150 170 kgf cm 130 150 in lbf COOLING SYSTEM Level 2 Tools required 3 amp 4mm Hex wrench 25 or 50 mm 1 or 2 in cleaning brush Parts required None if you are careful IMPORTANT To maintain proper engine operating temperatures cooling air must pass freely through the cylinder fin area This flow of air car ries combustion heat away from the engine Overheating and engine seizure can occur when e Air intakes in the crankcase are blocked preventing cooling air from reaching the cylinder e Dust and grass build up on the outside o
17. MILY PRODUCT EMISSION DURABILITY EMISSION COMPLIANCE PERIOD The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emis sions output meets applicable emissions regulations provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual HEDGE CLIPPER 7 OPERATOR S MANUAL DESCRIPTION Locate the safety decals on your unit Make sure the decals are legible and that you understand and follow the instruc tions on them If a decal cannot be read a new one can be ordered from your ECHO dealer See PARTS ORDERING instructions for specific information Hot Decal near muffler P N X505000270 P N X505002310 P N X505000280 8 10 11 12 13 14 15 MECHO BLADES Double reciprocating single side blades mounted to a blade support bar SUPPORT HANDLE WITH GUARD FOR RIGHT HAND Rubber non slip grip guard protects hand from the blades Warning decals are located on guard SPARK PLUG Provides spark to ignite fuel mixture PURGE BULB Pumping purge bulb before starting engine draws fresh fuel from the fuel tank purging air from the carburetor Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line Pump bulb an additional 4 or 5 times CHOKE The choke control lever is located on the front of the air cleaner case Move choke lever to COLD START tt to close t
18. ator s Manual ECHO Inc recommends that you retain all receipts covering maintenance on your equipment SORE however ECHO Inc cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance As the equipment SORE owner you should be aware that ECHO Inc may deny you warranty coverage if your equipment SORE or a part has failed due to abuse neglect improper maintenance or unapproved modifications You are responsible for presenting your equipment SORE to an ECHO Inc authorized service representative as soon as a problem exists The warranty repairs should be completed in a reasonable amount of time not to exceed 30 days If a warrantable condition exists and there is no Authorized Dealer within 100 miles ECHO Inc will pay to ship the unit to the nearest authorized dealer If you have questions regarding your warranty coverage you should contact ECHO Inc at 1 800 673 1558 web site WWW ECHO USA COM or contact Shindaiwa at 1 877 986 7783 web site WWW SHINDAIWA COM WHAT DOES THIS WARRANTY COVER ECHO Inc warrants that your equipment SORE was designed built and equipped to conform with applicable EPA and C A R B emissions standards and that your equipment SORE is free from defects in material and workmanship that would cause it to fail to conform with applicable requirements for 2 years or the length of the ECHO Inc warranty whichever is longer The warranty period begins on the da
19. e Fuel line clogged Clean or replace Carburetor See your Echo dealer Fuel at cylinder No fuel at cylinder See your Echo dealer Muffler wet with fuel Fuel Mixture too rich Open choke Engine Clean replace air filter cranks Adjust carburetor starts hard See your Echo dealer doesnt start Spark at end No spark Stop switch off Turn switch to ON of plug wire Electrical problem See your Echo dealer Interlock switch See your Echo dealer Spark at plug No spark Spark gap incorrect Adjust to 65mm 0 026 in Covered with carbon Clean or replace Fouled with fuel Clean or replace Plug defective Replace plug Air filter Air filter dirty Clean or replace Fuel filter Fuel filter dirty Contaminants residues in Replace fuel Fuel vent Fuel vent plugged Contaminants residues in Clean or replace Engine runs a but dies or does not SparkPlug Plug Plug Plug dirtyfworn Normalwear 0 wear Clean and ae or replace accelerate Cooling System Cooling system Extended operation in dirty plugged dirty dusty locations Spark Arrestor Spark arrestor Normal wear Replace Screen screen plugged Engine does N A N A Internal engine problem See your Echo dealer not crank A WARNING Fuel vapors are extremely flammable and may cause fire and or explosion Never test for ignition spark by ground ing spark plug near cylinder plug hole otherwise serious personal injury may result HEDGE CLIPPER 2 5 OPERATOR S MANUAL STORAGE W
20. ed under the PRODUCT WARRANTY PERIOD section of this warranty statement for Life free of charge for a period of ten 10 years after the date of the complete unit s final production 28 MECHO PURCHASED REPAIR PARTS SHORT BLOCKS AND ACCESSORIES e 90 day residential or non income producing warranty e 30 day commercial institutional agricultural industrial income producing or rental application warranty ATTENTION TWO STROKE ENGINE POWER PRODUCT OWNERS This ECHO two stroke engine power product is a quality engineered unit which has been manufactured to exact tolerances to provide superior performance To help ensure the performance of the unit it is required to use two stroke oil which meets the ISO L EGD Standard per ISO CD 13738 and JASO M345 FC FD Standards ECHO Power Blend Two Stroke Oil is a premium two stroke oil specifically formulated to meet ISO L EGD ISO CD 13738 and JASO M345 FC FD Standards The use of two stroke oils designed for other applications such as for outboard motors or lawnmowers can result in severe engine damage and will void your two stroke engine limited warranty THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY e Lack of lubrication or engine failure due to the use of two stroke oils that do not meet the ISO L EGD ISO CD 13738 and JASO M345 FC FD Standards Engine problems due to inadequate lubrication caused by failure to use an ISO L EGD compliant and JASO M345 FC ED registered oil will void
21. f the cylinder This build up insulates the engine and prevents the heat from leaving Removal of crankcase cooling passage blockages or cleaning of cooling fins is considered Normal Maintenance Any failure attributed to lack of maintenance is not warranted 18 MWECHO 1 Remove muffler cover A 2 Remove starter cover B and clean dirt and dust from fins IMPORTANT DO NOT use a metal scraper to remove dirt from the cylinder fins 3 Assemble components in reverse order EXHAUST SYSTEM Spark Arrestor Screen Level 2 Tools required 4mm Hex wrench Cross Head Screwdriver Soft metal brush Parts Required Screen Gaskets 1 Disconnect spark plug lead 2 Remove muffler cover 3 Place piston at Top Dead Center TDC to prevent carbon dirt from entering cylinder 4 Remove spark arrestor screen cover A gasket B and screen C from muffler body 5 Clean carbon deposits from muffler components NOTE When cleaning carbon deposits be careful not to damage the cata lytic element inside muffler 6 Replace screen if it is cracked plugged or has holes burned through 7 Assemble components in reverse order HEDGE CLIPPER 1 Q OPERATOR S MANUAL Exhaust Port Cleaning Level 2 Tools required 4 mm Hex wrench Wood or plastic scraper Parts Required As needed Heat Shield 1 Remove spark plug lead from spark plug and remove engine cover 2 screws 2 Place piston at top dead
22. h you You can find these numbers on the engine housing For future reference write them in the space provided below Model No Type SN SERVICE Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer For the name and address of the Authorized ECHO Service Dealer nearest you ask your retailer or call 1 800 432 ECHO 3246 Dealer information is also available on our Web Site When presenting your unit for Warranty service repairs proof of purchase is required kO YAMARIEO CORP ASSEMBLED IN UEA DEALER Call 1 800 432 ECHO 1 800 432 3246 or www echo usa com ECHO CONSUMER PRODUCT SUPPORT If you require assistance or have questions concerning the applica tion operation or maintenance of this product you may call the ECHO Consumer Product Support Department at 1 800 673 1558 from 8 30 am to 4 30 pm Central Standard Time Monday through Friday Before calling please know the model and serial number of your unit WARRANTY REGISTRATION To ensure trouble free warranty coverage it is important that you regis ter your ECHO equipment on line at www echo usa com or by filling out the warranty registration card supplied with your unit Registering your product confirms your warranty coverage and provides a direct link between you and ECHO if we find it necessary to contact you CONSUMER PRODUCT SUPPORT 1 800 673 1558 8 30 4 30 Mon Fri C S T ADDITIONAL OR REPL
23. he choke for Cold Starting Move choke lever to RUN d t h position to open choke AIR CLEANER Contains replaceable filter element FUEL TANK CAP Covers and seals fuel tank opening FUEL TANK Contains fuel and fuel filter THROTTLE HANDLE FOR LEFT HAND Contains the Stop Switch Throttle Lockout and Throttle Trigger THROTTLE TRIGGER Spring loaded to return to idle when released Trigger Lockout must be depressed fully before Throttle Trigger will move During acceleration depress gradually for best operating technique STOP SWITCH SLIDE SWITCH mounted on top of the rear handle Move switch FORWARD to RUN BACK to STOP THROTTLE TRIGGER LOCKOUT This lever must be depressed before Throttle Trigger can be activated SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER WITH CATALYST The muffler or catalytic muffler controls exhaust noise and emission The spark arrestor screen prevents hot glowing particles of carbon from leaving the muffler Keep exhaust area clear of flammable debris RECOIL STARTER HANDLE Pull handle slowly until recoil starter engages then quickly and firmly DO NOT pull rope all the way out or allow the handle to snap back damage to the starter will occur BLADE COVER Used to cover blades during transportation or storage Remove blade cover before using unit HEDGE CLIPPER OPERATOR S MANUAL CONTENTS The ECHO product you purchased has been factory pre assembled for your convenience After o
24. ip the support handle securely with right hand and pull the recoil starter handle D with left hand until engine fires Throttle Release throttle and allow engine to return to idle before shutting off engine Stop Switch Move stop switch A to STOP position A WARNING 13 14 MECHO HEDGE TRIMMING WARNING Engine exhaust IS HOT and contains Carbon Monoxide CO a poison gas Breathing CO can cause unconsciousness serious in jury or death Exhaust can cause serious burns ALWAYS position unit so that exhaust is directed away from your face and body WARNING Hedge Clipper blades are very sharp Touching them may lead to severe personal injury Avoid touching blades whenever possible and always wear gloves to protect hands 1 Always grip support handle with right hand and throttle handle with left hand 2 Hold trimmer firmly and squeeze throttle trigger to accelerate en gine 3 Tilt trimmer so cutting teeth are angled slightly toward the hedge or shrub and proceed to cut A WARNING Never remove hands from unit when blades are moving A WARNING The engine continues running even when the blades have stopped due to an obstruction If this occurs stop the engine disconnect ignition cable and remove the obstruction MAINTENANCE WARNING Moving parts can amputate fingers or cause severe injuries Keep hands clothing and loose objects away from all openings Always stop engine di
25. l Protection Agency EPA and the California Air Resources Board C A R B and ECHO Incorporated ECHO Inc are pleased to explain the emission control system warranty on your 2010 and later equipment small off road engine SORE New equipment SORE must be designed built and equipped to meet stringent EPA and C A R B anti smog standards ECHO Inc must warrant the emission control system on your equipment SORE for the periods of time listed below provided there has been no abuse neglect or improper maintenance of your equipment SORE Your emission control system may include parts such as carburetor fuel injection system ignition system catalytic converter muffler fuel tank fuel feed lines fuel cap assembly spark plug air filters and other associated components Where a warrantable condition exists ECHO Inc will repair your equipment SORE at no cost to you including diagnosis parts and labor The Emission Control System warranty is extended to the original owner including all subsequent owners MANUFACTURER S WARRANTY COVERAGE The emission control system is warranted for 2 years or the length of the ECHO Inc warranty whichever is longer If any emission related part on your equipment is defective the part will be repaired or replaced by ECHO Inc or its Authorized Service Representative OWNER S WARRANTY RESPONSIBILITIES As the equipment SORE owner you are responsible for the performance of the required maintenance listed in your Oper
26. may be necessary to assure blades do not move at idle If blades move readjust carburetor according to Carburetor Ad justment instructions in this manual or see your ECHO Dealer 6 Throttle Trigger After engine warm up grip the throttle handle with left hand and support handle with right hand Depress the throttle trigger lockout and gradually depress throttle trigger E to increase engine RPM to operating speed STARTING WARM ENGINE The starting procedure is the same as Cold Start except DO NOT close the choke NOTE If engine does not start after 5 pulls use Cold Start Procedure STOPPING ENGINE l The blades must not move at idle otherwise serious personal injury may result Periodic carburetor adjustment may be necessary to as sure blades do not move at idle If blades move readjust carburetor according to Carburetor Ad justment instructions in this manual or see your ECHO Dealer If engine does not stop when stop switch is moved to STOP posi tion close choke COLD START position to stall engine Have your ECHO dealer repair stop switch before using hedge clipper again HEDGE CLIPPER OPERATOR S MANUAL A WARNING Stop Switch Move stop switch A away from the STOP position Purge Bulb Pump purge bulb C until fuel is visible and flows freely in the clear fuel tank return line Pump bulb an additional 4 or 5 times Recoil Starter Place the unit on a flat clear area Gr
27. oper maintenance is not covered by this warranty All parts or products replaced under warranty become the property of ECHO Inc This warranty is separate from the Emission control warranty statement supplied with your new product Please consult the Emission Control Warranty Statement for details regarding emission related parts For a list of Authorized ECHO Dealers refer to WWW ECHO USA COM or call 1 800 432 ECHO OWNER S RESPONSIBILITY To ensure trouble free warranty coverage it is important that you register your ECHO equipment on line at WWW ECHO USA COM or by fill ing out the warranty registration card supplied with your unit Registering your product confirms your warranty coverage and provides a direct link if we find it necessary to contact you The owner shall demonstrate reasonable care and use and follow preventative maintenance storage fuel and oil usage as prescribed in the operator s manual Should a product difficulty occur you must at your expense deliver or ship your ECHO unit to an authorized ECHO servicing dealer for warranty repairs within the applicable warranty period and arrange for pick up or return of your unit after the repairs have been made For your nearest authorized ECHO servicing dealer call ECHO s Dealer Referral Center at 1 800 432 ECHO or you can locate an ECHO servicing dealer at WWW ECHO USA COM Should you require assistance or have questions concerning ECHO s Warranty Statement you can contact ou
28. pening the carton check for damage Immediately notify your retailer or ECHO Dealer of damaged or missing parts Use the contents list to check for missing parts MEGHD Hedge Clipper Assembly Operators Manual Safety Manual Warranty Registration Card Blade Cover ASSEMBLY This model is factory assembled 9 10 MECHO OPERATION WARNING Moving parts can amputate fingers or cause severe injuries Keep hands clothing and loose objects away from all openings Always stop engine disconnect spark plug and make sure all moving parts have come to a complete stop before removing obstructions clearing debris or servicing unit A WARNING Operation of this equipment may create sparks that can start fires around dry vegetation This unit is equipped with a spark arrestor and a spark arrestor may be required The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements FUEL NOTICE Use of unmixed improperly mixed or fuel older than 90 days stale fuel may cause hard starting poor performance or severe engine damage and void the product warranty Read and follow instructions in the Storage section of this manual WARNING Alternative fuels such as E 15 15 ethanol E 85 85 ethanol or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2 stroke gasoline engines Use of alternative fuels may cause
29. r Consumer Product Support Department at 1 800 673 1558 or contact us through the web at WWW ECHO USA COM PRODUCT WARRANTY PERIOD RESIDENTIAL APPLICATION e 5 YEAR WARRANTY All units for residential or non income producing use will be covered by this limited warranty for five 5 years from date of purchase EXCEPTIONS e For two stroke engine powered products the electronic ignition module flexible drive cables SRM solid drive shafts and TC tines are warranted for the life of the product on parts only e Cutting attachments such as but not limited to bars chains sprockets blades and nylon trimmer heads for residential or non income producing use will be covered for failures due to defects in material or workmanship for a period of 60 days from original product purchase date Any misuse from contact with concrete rocks or other structures is not covered by this warranty e ECHO s Rapid Loader String Head carries a lifetime warranty on the line locking system parts only no labor Refer to your operator s manual for string head installation and maintenance instructions e All SB Series and PRO ATTACHMENT SERIES Split Shaft attachments carry the same warranty duration as the units they are designed to fit COMMERCIAL APPLICATION 1 YEAR WARRANTY All Chain Saws QuikVent Saws and Cut Off Saws for commercial institutional agricultural industrial or income producing use will be covered by this limited warranty for one 1
30. rform required maintenance services as prescribed in the operator s manual Preventative maintenance as outlined in the operators manual is the customer s responsibility Failures due to improper set up pre delivery service or repair service by anyone other than authorized ECHO servicing dealer during the warranty period e Certain parts and other items are not warranted including but not limited to lubricants starter cords and engine tune ups Use of spark plugs other than those meeting performance and durability requirements of the OEM spark plug listed in the Operator s Manuals e Overheating or carbon scoring failures due to restricted clogged exhaust port or combustion chamber including damage to spark arrester screen Adjustments after the first 30 thirty days and beyond such as carburetor adjustment and throttle cable adjustment e Damage to gears or gear cases caused by contaminated grease or oil use of incorrect type or viscosity of lubricants and or failure to comply with recommended grease or oil change intervals Damage caused by loading SHRED N VAC beyond recommended capacity e Damage caused by pump or sprayer running dry pumping or spraying caustic or flammable materials or lack of or broken strainers Additional damage to parts or components due to continued use after operational problem or failure occurs Should operational problem or failure occur the product should not be used but delivered as is
31. s cans may be under pressure Always loosen fuel caps slowly allowing pressure to equalize e NEVER refuel a unit when the engine is HOT or RUNNING e DO NOT fill fuel tanks indoors ALWAYS fill fuel tanks outdoors over bare ground e DO NOT overfill fuel tank Wipe up spills immediately e Securely tighten fuel tank cap and close fuel container after refueling e Inspect for fuel leakage If fuel leakage is found do not start or operate unit until leakage is repaired e Move at least 3m 10 ft from refueling location before starting the engine Mixing Instructions Fuel to Oil Mix 50 1 Rati 1 Fill an approved fuel container with half of the required amount of UE tO OII BUX 99 auo 2 Add the proper amount of 2 stroke oil to gasoline OIL GAS Ol 4 Add remaining gasoline close fuel container and remix 13 3 Close container and shake to mix oil with gasoline IMPORTANT Spilled fuel is a leading cause of hydrocarbon emissions Some states may require the use of automatic fuel shut off containers to reduce fuel spillage After use DO NOT store a unit with fuel in its tank Leaks can occur Return unused fuel to an approved fuel storage container Storage Fuel storage laws vary by locality Contact your local gov ernment for the laws affecting your area As a precaution store fuel in an approved airtight container Store in a well ventilated unoccupied building away from sparks and flames IMPORTANT S
32. sconnect spark plug and make sure all moving parts have come to a complete stop before removing obstructions clearing debris or servicing unit Allow unit to cool before performing service Wear gloves to protect hands from sharp edges and hot surfaces Your ECHO unit is designed to provide many hours of trouble free service Regular scheduled maintenance will help your unit achieve that goal If you are unsure or are not equipped with the necessary tools you may want to take your unit to an ECHO Service Dealer for maintenance To help you decide whether you want to DO IT YOURSELF or have the ECHO Dealer do it each maintenance task has been graded If task is not listed see your ECHO Dealer for repairs HEDGE CLIPPER 1 5 OPERATOR S MANUAL SKILL LEVELS Levell Easy to do Common tools may be required Level2 Moderate difficulty Some specialized tools may be required ECHO offers REPOWER Maintenance Kits and Parts to make your maintenance job easier MAINTENANCE INTERVALS DAILY OR MAINTENANCE YEARLY 600 COMPONENT SYSTEM PROCEDURE BEFORE Inspect Clean Inspect Clean Inspect Replace Inspect Replace Fuel System Spark Plug Cooling System Muffler Spark Arrestor Cylinder Exhaust Port Gear Housing Blades Recoil Starter Rope Sscrews Nuts Bolts Inspect Tighten Replace ee ee ae ee ae MAINTENANCE PROCEDURE LETTER CODES INSPECT R REPLACE C CLEAN IMPORTANT NOTE Time intervals shown are maximum Actual use
33. scription application Carburetor adjustment High speed mixture Carburetor adjustment Low speed mixture Carburetor adjustment Idle speed Safety Alert Avoid all power lines This unit is not insulated against electrical current Plan retreat path from falling objects Do not operate closer than 15 M 50 ft from electrical hazards Primer bulb DO NOT ALLOW Wear slip resistant FLAMES OR foot wear SPARKS NEAR FUEL Keep bystanders at least 4 5 meters 15 feet away 3 4 MECHO PERSONAL CONDITION AND SAFETY EQUIPMENT WARNING Users of this product risk injury to themselves and others 1f the unit is used improperly and or safety precautions are not followed Proper clothing and safety gear must be worn when operating unit Physical Condition Proper Clothing Your judgment and physical dexterity may not be good Wear snug fitting durable clothing e if you are tired or sick e Pants should have long legs shirts with long sleeves e if you are taking medication e DO NOT WEAR SHORTS e if you have taken alcohol or drugs e DO NOT WEAR TIES SCAREFS JEWELRY Operate unit only if you are physically and mentally well Wear sturdy work shoes with nonskid soles e DO NOT WEAR OPEN TOED SHOES Eye Protection e DO NOT OPERATE UNIT BAREFOOTED Keep long hair away from engine and air intake Retain Wear eye protection that meets ANSI Z87 1 or CE re hair with cap or net quirements whenever yo
34. te the product is purchased by an end user HOW WILL A COVERED PART BE CORRECTED If there is a defect in a part covered by this warranty any ECHO Inc Authorized Service Dealer will correct the defect You will not have to pay anything to have the part adjusted repaired or replaced This includes any labor and diagnosis for warranted repairs performed by the dealer In addition engine parts not expressly covered under this warranty but whose failure is a result of a failure of a covered part will be warranted WHAT PARTS ARE COVERED Any applicable emission related part not scheduled for required maintenance will be repaired or replaced within the warranty period The repaired or replaced part will be warranted for the remaining ECHO Inc warranty period Any warranted part that is scheduled only for regular inspection in the written instructions supplied is warranted for the warranty period stated above Any such part repaired or replaced under warranty will be warranted for the remaining ECHO Inc warranty period Any emission related part scheduled for replacement during required maintenance is warranted for the period of time prior to the first scheduled replacement point for that part Any such part repaired or replaced under warranty shall be warranted for the remainder of the period prior to the first scheduled replacement point for that part Any manufacturer approved replacement part may be used in the performance of any warranty main
35. tenance or repairs on emission related parts and must be provided without charge if the part is still under warranty Any replacement part that is equivalent in performance and durability may be used in non warranty maintenance or repairs and shall not reduce the warranty obligations of the manufacturer Throughout the equipment SORE warranty period ECHO Inc will maintain a supply of warranted parts sufficient to meet the expected demand for such parts SPECIFIC EMISSION RELATED WARRANTED PARTS e Electronic Ignition System e Spark Plug e Catalytic Converter Muffler Assembly e Carburetor complete assembly or replaceable components e Choke e Fuel Injection Assembly or replaceable components e Fuel Tank e Fuel Cap Assembly e Air Filter e Fuel Feed Line and associated clamps connectors as applicable WHAT IS NOT COVERED Any failure caused by abuse neglect improper maintenance unapproved modifications use of unapproved add on parts modified parts or unapproved accessories This Emission Control Warranty is valid only for the U S A it s Territories and Canada 99922201033 01 2010 29 NOTES HEDGE CLIPPER 3 1 OPERATOR S MANUAL NOTES SERVICING INFORMATION PARTS SERIAL NUMBER Genuine ECHO Parts and ECHO REPOWER Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer When you do need to buy parts always have the Model Num ber Type and Serial Number of the unit wit
36. the two stroke engine limited warranty ECHO Power Blend Two Stroke Oil meets the ISO L EGD and JASO M345 EC FD_ Standard Emission related parts are covered for 5 years residential use or 2 years commercial use regardless of two stroke oil used per the statement listed in the EPA or California Emission Defect Warranty Explanation e Damage caused by use of gasohol containing methanol wood alcohol or gasoline containing less than 89 octane Only use gasoline which contains 89 octane or higher Gasohol which contains a maximum 10 ethanol grain alcohol or 15 MTBE methyl tertiary butyl ether is also approved The prescribed mixing ratio of gasoline to oil is listed on the ECHO oil label and covered in your operator s manual e Engine damage caused by use of ether or any starting fluids Damage caused by tampering with engine speed governor or emission components or running engines above specified and recommended engine speeds as listed in your operator s manual Operation of the unit with improperly maintained removed cutting shield or removed damaged air filter Damage caused by dirt pressure or steam cleaning the unit salt water corrosion rust varnish abrasives and moisture Defects malfunctions or failures resulting from abuse misuse neglect modifications alterations normal wear improper servicing or use of unauthorized attachments Incorrect storage procedures stale fuel including failure to provide or pe
37. to an authorized ECHO servicing dealer Itis a dealer s and or customer s responsibility to complete and return the warranty registration card supplied with your ECHO product or by visiting WWW ECHO USA COM Your receipt of purchase including date model and serial number must be maintained and presented to an authorized ECHO servicing dealer for warranty service Proof of purchase rests solely with the customer Some states do not allow limitations on how long an implied warranty lasts so the above limitations may not apply to you Some states do not allow the exclusion or limitation of incidental or consequential damages so you may also have other specific legal rights which vary from state to state This limited warranty is given by ECHO Incorporated 400 Oakwood Rd Lake Zurich IL 60047 DISCLAIMER OF IMPLIED WARRANTIES This limited warranty is in lieu of all other expressed or implied warranties including any warranty of FITNESS FOR A PARTICULAR PURPOSE OR USE and any implied warranty of MERCHANTABILITY otherwise applicable to this product ECHO and its affiliated companies shall not be liable for any special incidental or consequential damage including lost profits There are no warranties extended other than as provided herein This limited warranty may be modified only by ECHO 99922201032 12 03 09 HEDGE CLIPPER OPERATOR S MANUAL ECHO INCORPORATED EMISSION CONTROL WARRANTY STATEMENT FOR ECHO AND SHINDAIWA BRANDS The Environmenta
38. tored fuel ages Do not mix more fuel than you expect to use in thirty 30 days ninety 90 days when a fuel stabilizer is added IMPORTANT Stored two stroke fuel may separate ALWAYS shake fuel con tainer thoroughly before each use 12 MECHO STARTING COLD ENGINE A WARNING Hedge Clipper blades are very sharp Touching them may lead to severe personal injury Avoid touching blades whenever possible and always wear gloves to protect hands NOTE The blade cover is used for transportation and storage Remove blade cover before using the unit 1 Stop Switch Move stop switch A away from the STOP position 2 Choke Move choke B to the Cold Start tH CLOSED position 3 Purge Bulb Pump purge bulb C until fuel is visible and flows freely in the clear fuel tank return line Pump bulb an additional 4 or 5 times 4 Recoil Starter Lay the unit on a flat clear area Grip the support handle securely with right hand and pull the recoil starter handle D with left hand until engine fires or 5 pulls maximum 5 Choke After engine fires or 5 pulls move choke B to the RUN d t h OPEN position Restart engine if necessary and allow unit to warm up at idle for several minutes NOTE If engine does not start with choke in Run position after 5 pulls repeat instructions 2 5 WARNING The blades must not move at idle otherwise serious personal injury may result Periodic carburetor adjustment
39. u operate the unit Hand Protection Hot Humid Weather Wear no slip heavy duty work gloves to improve your Heavy protective clothing can increase operator fatigue grip on the handle Gloves also reduce the transmission which may lead to heat stroke Schedule heavy work for of machine vibration to your hands early morning or late afternoon hours when temperatures are cooler Hearing Protection ECHO recommends wearing hearing protection whenever unit 1s used Extended Operation Extreme Conditions It is believed that a condition called Raynaud s Phenomenon which affects the fingers of certain individuals may be brought about by exposure to vibration and cold Exposure to vibration and cold may cause tingling and burning sensa tions followed by loss of color and numbness in the fingers The following precautions are strongly recommended because the minimum exposure which might trigger the ailment is unknown e Keep your body warm especially the head neck feet ankles hands and wrists e Maintain good blood circulation by performing vigorous arm exer cises during frequent work breaks and also by not smoking e Limit the hours of operation Try to fill each day with jobs where op erating the unit or other hand held power equipment is not required e If you experience discomfort redness and swelling of the fingers fol lowed by whitening and loss of feeling consult your physician before further exposing yourself to cold and
40. vibration HEDGE CLIPPER OPERATOR S MANUAL Repetitive Stress Injuries It is believed that overusing the muscles and tendons of the fingers hands arms and shoulders may cause soreness swelling numbness weakness and extreme pain in those areas Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury RSI An extreme RSI condition is Carpal Tunnel Syndrome CTS which could occur when your wrist swells and squeezes a vital nerve that runs through the area Some believe that prolonged exposure to vibration may contribute to CTS CTS can cause severe pain for months or even years To reduce the risk of RSI CTS do the following Avoid using your wrist in a bent extended or twisted position Instead try to maintain a straight wrist position Also when grasping use your whole hand not just the thumb and index finger Take periodic breaks to minimize repetition and rest your hands Reduce the speed and force with which you do the repetitive move ment Do exercise to strengthen the hand and arm muscles Immediately stop using all power equipment and consult a doctor if you feel tingling numbness or pain in the fingers hands wrists or arms The sooner RSI CTS is diagnosed the more likely permanent nerve and muscle damage can be prevented DANGER Do not operate this product indoors or in inadequately ventilated areas Engine exhaust contains poisonous emissions and can cause
41. year from the date of purchase 2 YEAR WARRANTY All other units for commercial institutional agricultural industrial or income producing use will be covered by this limited warranty for two 2 years from the date of purchase EXCEPTIONS e For two stroke engine powered products the electronic ignition module flexible drive cables SRM solid drive shafts and TC tines are warranted for the life of the product on parts only e Cutting attachments such as but not limited to bars chains sprockets blades and nylon trimmer heads for commercial institutional agricultural industrial rental or income producing will be covered for failures due to defects in material or workmanship for a period of 30 days from original product purchase date Any misuse from contact with concrete rocks or other structures is not covered by this warranty e ECHO s Rapid Loader String Head carries a lifetime warranty on the line locking system parts only no labor Refer to your operator s manual for string head installation and maintenance instructions e All SB Series and PRO ATTACHMENT SERIES Split Shaft attachments carry the same warranty duration as the units they are designed to fit RENTAL APPLICATION 90 DAYS WARRANTY e Units for rental use will be covered against defects in material and workmanship for a period of 90 days from the date of purchase ECHO s liability under the Lifetime coverage is limited to furnishing parts specifi
Download Pdf Manuals
Related Search