Clarion DB348RMP User's Manual
Contents
1. e Owner s manual Mode d C la f IO N Bedienungsanleitung Is Gebruiksaanwijzing M Bruksanvisning Manu DB348RMP AM FM MP3 CD PLAYER e RADIO AM FM LECTEUR CD MP3 AM UKW MP3 CD SPIELER SINTOLETTORE CD MP3 AM FM e AM FM MP3 CD SPELER e REPRODUCTOR DE AM FM CD MP3 AM FM RADIO OCH CD MP3 SPELARE e E pAnin AM EM IEITAR NE JE RADIO AM FIV LI OR DE H lt ice 44 73 Pros DIGITAL AUDIO ID3 TAG ec Thank you for purchasing this Clarion product Please read this owner s manual in its entirety before operating this equipment After reading this manual be sure to keep it in a handy place e g glove compartment Check the contents of the enclosed warranty card and keep it carefully with this manual CAUTIONS This appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT To use this model properly read this Owner s Manual carefully and keep this manual for your future reference In case of any trouble with this player please contact your nearest AUTHORIZED service station To prevent direct exposure to the laser beam do not try to open the enclosure USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER S MANUAL MAY RESULT IN HAZARDOUS RADIA2. DEMORNP mea clarion F enjoy the use of the Remote Control function Remote control unit Signal transmitter ALL FUNC E z ce s ecco al _ VS U n1 E BAND MAI Tauei murelle aag Sn PS AS 822 PH AF Sc L TIN a6 IL Clarion WIRELESS REMOTE CONTROLLER Inserting the Batteries 1 Turn the remote control unit over then slide the rear cover in the direction of the arrow 2 Insert the AA SUM 3 IECR 6 1 5V batteries that came with the remote control unit facing in the directions shown in the figure then close the rear cover Notes Using batteries improperly can cause them to ex plode Take note of the following points When replacing batteries replace both batteries with new ones Do not short circuit disassemble or heat batteries Do not dispose of batteries into fire or flames Dispose of spent batteries properly AA SUM 3 IECR 6 1 5V Batteries Rear cover Rear side 8 DB348RMP Functions of Remote Control Unit Buttons Radio RDS FUNC Switches between radio and CD MP3 BAND Switches reception band Plays the first track Plays the first track of the Top play current folder A V Increases and decreases volume in all modes lt q gt Moves preset channels Moves tracks up and down up and down When pressed and held for 1 sec
3. 128 144 160 192 224 256 320 VBR CD ROM Format ISO9660 Level 1 2 Romeo and Joliet Folder Level Limit No limitation Folder Support 128 File Support 254 Folder Name Maximum 16 characters File Name Maximum 28 characters 26 DB348RMP 9 SPECIFICATIONS Audio Maximum Power Output 204 W 51 W X 4 ch Continuous Average Power Output 25 W X 4 into 4 Q 20 Hz to 20 kHz 1 THD Bass Control Action 30 Hz 14 dB Treble Control Action 10 kHz 14 dB Line Output with A C 1 kHz 10 KQ 1 7 V General Power Supply Voltage 14 4 V DC 10 8 V to 15 6 V allowable negative ground Current Consumption Less than 15 A Speaker Impedance 4 Q 4 Qto 8 Qallowable Weight 2 42 Ib 1 1 kg Dimensions 178 mm Width X 50 mm Height X 152 mm Depth 178 mm 50 mm D ae 52mm 1 Lo 188 mm 58 mm Notes Specifications comply with JEITA Standards Specifications and design are subject to change without notice for further improvement Please make sure when connecting external power amplifier that you properly to the car chas sis ground the amplifier If this is not done severe damage to the source unit way happen
4. careful not to press and hold the PS AS but ton for 2 seconds or longer otherwise the auto store function is engaged and the unit starts stor ing stations RDS Operations RDS Radio Data System This unit has a built in RDS decoder system that supports broadcast stations transmitting RDS data This system can display the name of the broad cast station being received PS and can auto matically switch to the broadcast station with the best reception as you move long distances AF switching Also if a traffic announcement or programme type is broadcast from an RDS station no matter what mode you are in this broadcast is received Additionally if EON information is received this information enables automatic switching of other preset stations on the same network and inter ruption of the station being received with traffic information from other stations TP This func tion is not available in some areas When using the RDS function always set the radio to FM mode AF Alternative Frequency PS Programme Service Name PTY Programme Type EON Enhanced Other Network TP Traffic Programme RDS interrupt does not function during AM radio reception AF function The AF function switches to a different fre quency on the same network in order to main tain optimum reception The factory default setting is ON Switching OFF the AF function Press the AF button AF in the display goes
5. is on the LCD will display SCH 4 and the start character blinking is which is a blank character The character changes start from 0 to 9 for number display and A to Z for capital letter display and starts from again if you turn the ROTARY knob clockwise The character changes from Z to A and 9 to 0 and starts from again if you turn the ROTARY knob counterclockwise DB348RMP 19 MP3 Mode Operation 3 To search for a file you can select any char acters After selecting the first character press the ROTARY knob to select the sec ond character To start searching by pressing the gt button to erase the previous char acters by pressing the lt d button If you enter A the player will search for A If you enter fg A the player will search for A and the is a space characters If you enter BEES the player will be unable to find the file and show NOTFOUND on the LCD If the file or folder is found the MP3 CD player will display the found folder with the F gt sign or the filename without any sign If you press the ROTARY knob or P gt but ton on the folder result the first song of folder will be played If the file is not found NOTFOUND will be displayed The Special Function Menu will be released by pressing the ROTARY knob for 2 sec onds or longer or it will be released auto matically after 15 seconds Display Descrip
6. level 0 to 33 When the TA ALARM or PTY interrupt ends the volume returns to the level it had before the inter rupt DB348RMP 17 TETE CD Mode Operations Loading a CD Insert a CD into the center of the CD insertion slot with the labeled side facing up LOAD appears in the display the CD enters into the slot and start play ing CD SLOT Notes e Do not put your hand fingers or foreign objects into the CD insertion slot If a CD has already been loaded another CD cannot be inserted Do not insert another one forcefully ON e Discs not bearing the Inst mark cannot be played with the unit CD ROMs cannot be played Some CDs recorded in CD R CD RW mode may not be usable Listening to the Disc already Inserted Press the FNC button to select the CD mode the CD will start playing Stopping pausing Playback While the CD playing pressing the gt II button will stop the CD and PAUSE indicate Press the gt II button again to resume play back Ejecting the CD Press the 4 button then the CD will be ejected Note f the ejected CD is left as it is it will be reloaded after 15 seconds However single CDs will not be reloaded so make sure to remove them Top Function Press the BND button then the CD will start playing from the first song track number 1 For MP3 mode it will start playing from the first song of current folder 18 DB348RMP Selec
7. sen sitivity are selected When local seeking starts LO appears in the display DB348RMP 13 Radio Operations Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode the fre quency changes one step at a time In the quick tuning mode you can quickly tune the desired frequency 1 Press the BND button and select the de sired band FM or AM MW LW If MANU is not lit in the display press and hold the BND button for 2 seconds or longer MANU is lit in the display and manual tuning is now available 2 Tune into a station Quick tuning Press and hold the lt d or P gt button for 2 second or longer to tune in a station Step tuning Press the lt d or gt button to manually tune in a station Recalling a preset station A total of 24 preset positions 6 FM1 6 FM2 6 FM3 6 AM exists to store individual radio sta tions in memory Pressing the corresponding DIRECT button recalls the stored radio fre quency automatically 1 Press the BND button and select the de sired band FM or AM MW LW 2 Press the corresponding DIRECT button to recall the stored station Press and hold one of the DIRECT buttons for 2 seconds or longer to store that station into preset memory Manual memory 1 Select the desired station with seek tuning manual tuning or preset tuning 2 Press and hold one of the DIRECT but
8. 348RMP Storing the DCP in the DCP Case Hold the DCP in the orientation as shown in the figure below and put it into the supplied DCP case Ensure the DCP is in the correct orienta tion A CAUTION The DCP can easily be damaged by shocks After removing it be careful not to drop it or subject it to strong shocks When the Release button is pressed and the DCP is unlocked the car s vibrations may cause it to fall To prevent damage to the DCP always store it in its case after de taching it See figure above The connector connecting the main unit and the DCP is an extremely important part Be careful not to damage it by press ing on it with fingernails pens screwdriv ers etc DCP Rear Panel Main Unit Front DCP connector Main unit connector Note If the DCP is dirty wipe off the dirt with a soft dry cloth only 6 OPERATIONS Note Be sure to read this chapter referring to the front diagrams of chapter 2 CONTROLS on page 5 unfold Basic Operations ACAUTION Be sure to lower the volume before switch ing off the unit power or the ignition key The unit remembers its last volume setting If you switch the power off with the volume up when you switch the power back on the sudden loud volume may hurt your hearing and damage the unit Turning on off the power Note Be careful about using this unit for a long time without running the engine If you
9. DA type is selected display will show M S CD When MP3 type is selected display will show M S MP3 5 CD DA MP3 Selection function can only be performed in CD MP3 mode It will only acti vate after re insert CD For example current setting is CD DA type User has to eject CD and re insert it again as to play MP3 files 6 Types of recording that can be played are as follows Set to CD Set to MP3 Mixed with CD and Play CD Play MP3 MP3 type tracks CD type track only Play CD Play CD MP3 type track only Play MP3 Play MP3 7 When a mixed mode CD is loaded and CD is set the track to be played first is MP3 file data and no sound is heard 22 DB348RMP MP3 Mode Operation Figure 1 Display selection You can choose the display type for MP3 CD by pressing the DISP button To select the next type press the DISP button again The arrangement is shown below DISPLAY SELECT OPERATION TRACK No in current folder Play Time Note The track number is indicating the track order in current playing folder FOLDER No TRACK No in current Folder Note The track number is indicating the track order in current playing folder ncmo gor op Bie bina pris et ALBUM T_ V ARTISET W After 2sec After 2sec adt iba aa TV LICHE HICH REL E TITLE SCROLL PPP PPP eee ed AELELEETEE EESEEEEREEEEEREEREE
10. N Scan in SCN button less than 1 current folder ingicator second Press the SCN Scanfirst Folder amp button more than 1 track of SCN second each folder indicator Random access Function Display Press the RDM Random RDM button less than 1 track in current indicator seconds folder only Press the RDM Random track Folder amp button more than 1 in all folders RDM Seconds indicator 3 Each time the button is pressed scan play 3 Each time the button is pressed random turns on or off play turns on or off 4 When the scan play function is on the SCN 4 When the random play function is on the indicator will be displayed When the function RDM indicator will be displayed When the is off the indicator will not be displayed function is off the indicator will not be dis played Display Selection 1 You can choose the display type for MP3 CD by pressing the DISP button To select the next type press the DISP but ton again The arrangement is shown below Please refer to figure 1 Repeat MP3 CD 1 This function enables you to replay the track or folder you are listening to 2 There are 2 types of repeat play accessible for MP3 CD Repeat track and Repeat folder Repeat access Function Display Press the RPT Repeat RPT indicator Title Display Mode button less than 1 current 1 There are 5 types of display for the Title Dis seconds so
11. REREEREREERRERRERERRRERRRERRRERRREERRESRRRERRRRRRR RR pode The displayed item can be scrolled by pressing the CH6 button if the number of character is more than 8 DB348RMP 23 7 IN CASE OF DIFFICULTY Problem Power does not turn on No sound is produced Fuse is blown Solution Replace with a fuse of the same amperage lf the fuse blows again consult your store of purchase Incorrect wiring Consult your store of purchase Compact disc cannot be loaded Another compact disc is already loaded Eject the compact disc before loading the new one Sound skips or is noisy Compact disc is dirty Clean the compact disc with a soft cloth Compact disc is heavily scratched or warped Replace with a compact disc with no scratches Sound is bad directly after power is turned on Water droplets may form on the internal lens when the car is parked in a humid place Let dry for about 1 hour with the power on Nothing happens when button are pressed Display is not accurate 24 DB348RMP The microprocessor has malfunctioned due to noise etc Turn off the power then press the RELEASE button and remove the DCP Press the reset button for about 2 seconds with a thin rod Reset button DCP or main unit connectors are dirty Wipe the dirt off with a soft cloth moistened with cleaning alcohol 8 ERROR DISPLAYS H To protect the system this unit ha
12. S Today s events INFO Information SPORT Sports EDUCATE Education DRAMA Drama CULTURE Culture SCIENCE Science VARIED Variety POP M Pop music ROCK M Rock music EASY M Easy music LIGHT M Light music CLASSICS Classics OTHER M Other music WEATHER Weather FINANCE Finance CHILDREN For children SOCIAL Social RELIGION Religion PHONE IN Phone in TRAVEL Travel LEISURE Leisure JAZZ Jazz COUNTRY Country NATION M Nation music OLDIES Oldies FOLK M Folk music DOCUMENT Documentaries 3 If you press and hold any one of the DIRECT buttons for 2 seconds or longer the selected PTY is stored into that preset channel memory Emergency broadcast If an emergency broadcast is received all the function mode operations are stopped ALARM appears in the display and the emer gency broadcast can be heard e Cancelling an emergency broadcast If you press the AF button emergency broad cast reception is cancelled Volume setting of TA emergency broadcast ALARM and PTY The volume for TA ALARM and PTY interrupts can be set during TA ALARM or PTY interrupt The factory default setting is 15 During a TA ALARM or PTY interrupt turn the ROTARY knob clockwise or counterclockwise to set the volume to the desired
13. TION EXPOSURE ADVARSEL Denne meerking er anbragt udvendigt pa apparatet og indikerer at apparatet arbejder med laserstr ler af klasse 1 hvilket betyder at der anvendes laserstr ler af svageste klasse og at man ikke p apparatets yderside kan blive udsat for utilladelig kraftig str ling APPARATET BOR KUN ABNES AF FAGFOLK MED S ERLIGT KENDSKAB TIL APPARATER MED LASERSTRALER Indvendigt i apparatet er anbragt den her gengivne advarselsmeekning som advarer imod at foretage s danne indgreb i apparatet at man kan komme til at udsazette sig for laserstr ling 4 DB348RMP Apparaten innehaller laserkomponenten som avger laserstr lning verstigande gr nsen f r laserklass 1 Suojakoteloa si saa avata Laite sisaltaa laserdiodin joka lahettaa nakymatonta silmille vaarallista lasersateilya DB348RMP 12VOGROUND LW 153 279kH MW 531 1602kHz 13 022010 FM UKW 87 5 108MHz UTER AA This unit is designed for on road vehicle purpose CLASS 1 LASER PRODUCT PE 2641E Clarion Clarion Co Ltd MADE IN MALAYSIA Contents 1 2 3 9 PRECAUTIONS n t e c o eH ee ERE 3 Handling Compact Discs ia aaiaaiaiasaasassasassasassassasannasnnsansanansannannnnnnnnnnnnnsnnnnsnnnanannansanansnnsnnannaiia 4 ieiedio8c c 5 NOMENCLATURE 5 7 AST ee RE e tS BY i a ee 6 Names of the Buttons and
14. age No Do not expose compact discs to direct sunlight or any heat source wer Do not use commercially available CD protection sheets or discs equipped with stabilizers etc These may get caught in the internal mechanism and damage the disc Be sure to unfold and read the next page Bitte ausbreiten und die n chste Seite lesen Volgende pagina uitvouwen en doorlezen a u b C Gl m inte att vika ut och l sa n sta sida Nz 4 DB348RMP 9 CONTROLS LES COMMANDES REGLER CONTROLLI REGELAARS CONTROLES KONTROLLER CONTROLOS Main unit Appareil principal Hauptger t Apparecchio principale Hoofdtoestel Unidad principal Huvudenhet Unidade principal CD SLOT RELEASE FNC AF TA lt q D gt D 11 SS SCRL ROTARY Note Be sure to unfold this page and refer to the front diagrams as you read each chapter Remarque Veuillez d plier cette page et vous r f rer aux sch mas quand vous lisez chaque chapitre Hinweis Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten Nota Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo Opmerking Vouw dez
15. ations 1 Maximum number of files 254 2 Maximum number of folders 128 3 Some noise may occur depending on the type of encoder software used while recording MP3 Special Function Menu 1 When playing an MP3 CD press the ROTARY knob to display the MP3 Special Function Menu 2 There are 2 functions in the Special Function Menu 1 FLD UP DN 9 2 MP3 SRCH 3 To select the next function press the ROTARY knob again 4 When a function is selected turn the ROTARY knob clockwise or counterclockwise to activate it At this Special Function Menu PLAY PAUSE SCAN REPEAT RANDOM BND TOP DISP SS SCRL Track Up Down function are inoperable Note The Special Function Menu can be released by pressing the ROTARY knob for 2 seconds or longer or it will be released automatically after 7 seconds Folder Up Down Function FLD UP DN 1 This function enables you to search for a folder on the MP3 CD The LCD will show the target MP3 CD folder Turn clockwise Folder up Turn counterclockwise Folder down 2 When a desired folder is selected the MP3 CD player will play it Note The Special Function Menu can be released by pressing the ROTARY knob for 2 seconds or longer or it will be released automatically after 7 Seconds Search File Function MP3 SRCH 1 This function enables you to search a de sired folder and track by selecting the char acters on the MP3 CD 2 When this function
16. ce name 2 Press the BND button and select the radio band Each time the button is pressed the ra dio reception band changes in the following order FM1 gt FM2 gt FM3 3 AM MW LW gt FM1 3 Press the lt d or gt button to tune in the desired station Tuning There are 3 types of tuning mode available seek tuning manual tuning and preset tuning Seek tuning There are 2 types of seek tuning DX SEEK and LOCAL SEEK DX SEEK can automatically tune in to receiv able broadcast stations LOCAL SEEK can tune in to only broadcast stations with a good recep tion sensitivity 1 Press the BND button and select the de sired band FM or AM MW LW 2 Tune into a station If MANU is lit in the display press and hold the BND button for 2 seconds or longer MANU in the display goes off and seek tun ing is now available f TA is lit in the display TP stations are auto matically sought e DX SEEK Press the lt d or gt button to automatically Seek a station When the P gt button is pressed the station is sought in the direction of higher frequencies if the lt d button is pressed the station is sought in the direction of lower frequencies When seek tuning starts DX appears in the dis play LOCAL SEEK If you press and hold the lt d or P gt button for 1 second or longer local seek tuning is carried out Broadcast stations with good reception
17. ct Audio Mode Adjustments Press the A M button to select the adjustment mode The mode switches as follows each time the A M button is pressed BASS gt TREB gt BAL gt FAD gt Previous mode The display returns to the previous mode 7 sec onds after the adjustment DB348RMP 11 Basic Operations Adjusting the bass 1 Press the A M button and select BASS 2 Turning the ROTARY knob clockwise em phasizes the bass turning it counterclock wise attenuates the bass The factory default setting is 0 Adjustment range 7 to 7 Sa the treble Press the A M button and select TREB 2 Turning the ROTARY knob clockwise em phasizes the treble turning it counterclock wise attenuates the treble The factory default setting is 0 Adjustment range 7 to 7 Adjusting the balance 1 Press the A M button and select BAL 2 Turning the ROTARY knob clockwise em phasizes the sound from the right speaker turning it counterclockwise emphasizes the sound from the left speaker The factory default setting is 0 Adjustment range L13 to R13 aa the fader Press the A M button and select FAD 2 Turning the ROTARY knob clockwise em phasizes the sound from the front speakers turning it counterclockwise emphasizes the sound from the rear speakers The factory default setting is 0 Adjustment range F12 to R12 Note Bass and Treble can o
18. display lights and the unit automati cally receives a TP station Note e f a TP station is not received the unit continues the search operation Pressing TA button again goes off TA in the display and stops TP station searching Auto store function for TP stations You can automatically store up to 6 TP stations into preset memory If the number of TP that can be re ceived is less than 6 broadcast stations already stored in memory are left without being overwritten With TA lit in the display press and hold the PS AS button for 2 seconds or longer The TP stations with the good reception sensitivity are stored into preset memory Even if you select FM1 or FM2 a TP station is stored into memory for FM3 PTY This function enables you to listen to a broad cast of the selected programme type when it starts even if the unit is on a function mode other than radio Some countries do not yet have PTY broadcast In the TA standby mode a TP station has priority over a PTY broadcast station OG Setting the PTY standby mode When you press the PTY button PTY lights in the display and the PTY standby mode is turned on When the selected PTY broadcast starts the PTY item name appears in the display Cancelling the PTY standby mode When you press and hold the PTY button for 1 second or longer PTY goes off in the display and PTY standby mode is cancelled e Cancelling a PTY interrupt broadcast Press
19. display lights on then the entire tracks on the disc will be played at random Press the RDM button again to disengage the unit from random play MP3 Mode Operation What is MP3 MP3 is an audio compression method and classified into audio layer 3 of MPEG stan dards This audio compression method has penetrated into PC users and become a stan dard format This MP3 features the original au dio data compression to about 10 percent of its initial size with a high quality sound This means that about 10 music CDs can be re corded on a CD R disc or CD RW disc to allow a long listening time without having to change CDs Precautions when creating MP3 disc File extensions Always add a file extension MP3 to MP3 file by using single byte letters If you add a file exten sion other than specified or forget to add the file extension the file cannot be played Logical format File system When writing MP3 file on a CD R disc or CD RW disc please select ISO9660 level 1 2 3 or JOLIET or Romeo as the writing software for mat normal play may not be possible if the disc is recorded on another format The folder name and file name can be displayed as the title during MP3 play but the title must be within 16 Folder Name or 28 File Name single byte alphabetical letters and numerals excluding an extension Number of files or folders The MP3 recording media reproducible on this unit has the following limit
20. drain the car s battery too far you may not be able to start the engine and this can reduce the service life of the battery Press the FNC button The illumination and display on the unit light up The unit automatically remembers its last operation mode and will automatically switch to display that mode Press and hold the FNC button for 1 sec ond or longer to turn off the power for the unit po e Selecting a mode 1 Press the FNC button to change the opera tion mode Each time you press the FNC button the operation mode changes in the following or der Radio mode gt CD mode Radio mode Note e f the CD mode is selected when no disc is in serted the display shows NO DISC m Adjusting the volume Turning the ROTARY knob clockwise in creases the volume turning it counterclockwise decreases the volume The volume level is from 0 minimum to 33 maximum Setting the Z Enhancer This unit are provided with 3 types of sound tone ef fects stored in memory Select the one you prefer The factory default setting is Z EHCR OFF Each time you press the Z ENCR button the tone effect changes in the following order Z ENHANCER 1 gt Z ENHANCER 2 gt Z ENHANCER 3 gt Z EHCR OFF gt Z ENHANCER 1 Z ENHANCER 1 bass emphasized Z ENHANCER 2 treble emphasized Z ENHANCER 3 bass and treble empha sized Z EHCR OFF no sound effe
21. e If moisture forms on the disc wipe it off with a soft cloth If moisture forms on the optical parts of the player do not use the player for about one hour The condensation will disappear natu rally allowing normal operation DB348RMP 3 Handling Compact Discs This unit has been designed specifically for playback of compact discs bearing the MSK mark No other discs can be played To remove the compact disc from its storage case press down on the center of the case and lift the disc out holding it carefully by the edges Removing the disc Proper way to hold the compact disc Always handle the compact disc by the edges Never touch the surface To remove fingermarks and dust use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference New discs may have some roughness around the edges The unit may not work or the sound may skip if such discs are used Use a ball point pen etc to remove roughness from the edge of the disc Ball point pen Roughness Note Note on Compact Discs Never stick labels on the surface of the com pact disc or mark the surface with a pencil or pen No Do not use any solvents such as commercially available cleaners anti static spray or thinner to clean compact discs Do not use compact discs that have large scratches are misshapen or cracked etc Use of such discs will cause misoperation or dam
22. e pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken Nota Cuando lea los cap tulos despliegue esta p gina y consulte los diagramas Observera Vik ut denna sida for att kunna se figurerna ver bilstereons framsida medan du l ser de olika kapitlen Nota Certifique se de abrir esta p gina e consulte os diagramas frontais conforme realiza a leitura de cada capitulo DB348RMP 5 3 NOMENCLATURE Note Be sure to read this chapter referring to the front diagrams of chapter 2 CONTROLS on page 5 unfold Names of the Buttons and their Functions FNC button Press the button to turn on the power Press and hold the button for 1second or longer to turn off the power Switches the operation mode among the ra dio and CD MP3 mode RELEASE button Press the RELEASE button to unlock the DCP Z ENCR button Use the button to select one of the three types of sound characteristics already stored in memory Z Enhancer CD SLOT CD insertion slot DIRECT button Stores a station into memory or recall it di rectly while in the radio mode SCN button Performs scan play for 10 seconds for each track while in the CD mode RPT button Plays repeatedly while in the CD mode 4 button Ejects a CD when it is loaded into the unit RDM button Performs random play while in the CD mode TA button Use the butto
23. ically when a cellular tele phone rings in the car This function is not compatible with all cellular telephones Contact your local authorized Clarion dealer for information on proper installation and compatibility The factory default setting is TEL OFF Press and hold the BND button and then press the gt II to select the TEL MUTE or TEL OFF Basic Operations TEL MUTE mutes the audio sound TEL OFF does not mute the audio sound TEL MUTE TEL OFF During telephone interrupt the display shows TEL Illumination dimmer function When the illumination line of this unit is con nected with the car side illumination signal line the display illumination of this unit dims in con nection with turning on the car side illumination Turning the screen saver function on or off This unit is provided with the screen saver func tion You can turn on or off this function If the button operation is performed with the Screen saver function on the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display The factory default setting is on Press the SCRL button while keeping the BND button pressed to turn the screen saver function on or off Radio Operations Listening to the radio 1 Press the FNC button and select the radio mode The frequency or PS appears in the display PS Programme servi
24. ion is bad press the DIRECT button of the same number The unit receives a local station on the same network TA Traffic Announcement In the TA standby mode when a traffic announce ment broadcast starts the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it Traffic programme TP automatic tuning is also possible This function can only be used when TP is lit in the display When TP is lit this means that the RDS broadcast station being received has traffic announcement programmes OG Setting the TA standby mode If you press the TA button when only TP is lit in the display TP and TA light in the display and the unit is set into the TA standby mode until a traffic an nouncement is broadcast When a traffic announce ment broadcast starts TRA INFO appears in the display If you press the TA button while a traffic an nouncement broadcast is being received the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode DB348RMP 15 OUE RDS Operations e Cancelling the TA standby mode With TP and TA lit in the display press the TA button The TA in the display goes off and the TA standby mode is cancelled If TP is not lit pressing the TA button searches for a TP station OG Searching for a TP station When TP is not lit if you press the TA button TA in the
25. longer to switches the fast forward fast backward BND button Switches the band or seek tuning or manual tuning while in the radio mode Plays a first track while in the CD mode Press and hold the button to select between CD DA playback and MP3 playback in Multisession CD A M button Press and hold the button for 2 seconds or longer to switch the MAGNA BASS EX on off Use the button to switch to the audio mode bass treble balance fader Display Items Operation status indication PS names PTYs CT clock etc are displays Z enhancer indication TD QD EI GID aie Ta TEIFI GEH SCN RPT RDMJ c H Imm3 MP3 indication CIND Manual indication Alternative frequency indication GI 9 Regional indication Traffic announcement indication Traffic programme indication d Programme type indication M B EX MAGNA BASS EX i dicis 4 813 Folder indication LCD Screen Preset channel indication 1 to 6 SCN J Scan indication RPT Repeat indication RDM Random indication In extreme cold the screen movement may slow down and the screen may darken but this is normal The screen will recover when it returns to normal temperature DB348RMP 7 4 REMOTE CONTROL Optional Item r Receiver for remote control unit If you buy the RCB 164 sold separately you can Hi pare
26. n to set the TA Traffic An nouncement standby mode SCRL button Press the SCRL button while keeping the BND button pressed to turn the screen saver function on or off MP3 Function Press the SCRL button to scroll display which is more than 8 characters at Title Display PTY button Use the button to set the PTY Programme Type standby mode or PTY items gt I1 button Plays or pauses a CD while in the CD mode 6 DB348RMP AF button Press the button to turn on or off the AF Al ternative Frequency function When the button is pressed and held Re gional function can select ON or OFF DISP button Press the DISP button while keeping the BND button pressed to switch the display indication Main display clock display MP3 FUNCTION DISPLAY SELECTION Press the DISP button MP3 mode Each time you press the DISP button the display changes in the following order Track No Play time gt Folder No Track No Title Display gt Track No Play time PS AS button Performs preset scan while in the radio mode When the button is pressed and held auto store is performed ROTARY knob Adjust the volume by turning the knob clock wise or counterclockwise Use the knob to perform various settings lt q D button Selects a station while in the radio mode or selects a track when listening to a CD Press and hold the button for 1 second or
27. ng play mode Press the RPT Repeat Folder amp RPT 2 To select the next type press the DISP but button more than 1 current indicator ton for 2 second or longer Seconds folder The arrangement is shown below After 2 seconds Folder Title TRACK Track Title Album Tag ARTIST T Artist Tag TITLE T Title Tag 3 Each time the button is pressed repeat play turns on or off 4 When the repeat play function is on the RPT indicator will be displayed When the function is off the indicator will not be displayed T MP3 Mode Operation 3 The displayed item can be scrolled by press ing the SCRL button if the number of char acters is more than 8 4 If a MP3 file does not support for ID3 TAG the display will show NO TAG Note The folder name will be displayed as ROOT which the file allocates in the root folder The MP3 player decodes each file ID3 TAG ver 2 by default if ID3 TAG ver 2 is unavailable ID3 TAG ver 1 will be decoded CD DA MP3 Selection On Multi Session CD 1 If a multi session CD which contains CD DA and MP3 files is being inserted user can se lect either CD DA or MP3 files to be played 2 Default setting for files to be played on multi session CD is CD DA files 3 Press the BND button for more than 1 sec ond will toggle between selection of CD DA and MP3 files to be played 4 When CD
28. nly be adjusted when the Z enhancer is off Turning on off MAGNA BASS EX To adjust the MAGNA BASS EX The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment function but emphasizes the deep bass sound area to provide you with a dynamic sound The factory default setting is off Press and hold the A M button for 2 second or longer to turn the MAGNA BASS EX and M B EX in the display lights on or off 12 DB348RMP Switching display Press and hold the BND button and then press the DISP button to select the desired display The display switches in the following order Main gt Clock CT gt Main If the display is changed by other button opera tion when the clock CT is displayed the clock display returns automatically after the operation The example shows the display in radio mode Main display Main display CT Clock Time function The CT function enables you to display clock time only when CT data is received Press and hold the BND button and then press the DISP button the display switches to CT Clock Time When no CT data is received CT appears in the display Note There are some countries and stations where clock time data are not transmitted In some ar eas the CT may not be displayed correctly Triggered audio mute for cellular telephones This unit requires special wiring to mute the au dio signal automat
29. off and the AF function turns off Switching ON the AF function Press the AF button AF in the display lights and the AF function turns on If the reception of the current broadcast station deteriorates SEARCH appears in the display and the radio searches for the same programme on another frequency REG Regional programme function When the REG function is ON the optimum re gional station can be received When this func tion is OFF if the regional station area switches as you drive a regional station for that region is received The factory default setting is OFF Notes This function is disabled when a national station such as BBC R2 is being received The REG function ON OFF setting is valid when the AF function is ON Switching the REG function ON Press and hold the AF button for 1 second or longer REG in the display lights and the REG function turns on Switching the REG function OFF Press and hold the AF button for 1 second or longer REG in the display goes off and the REG func tion turns off Manually tuning a regional station in the same network 1 This function is valid when the AF function is ON and the REG function is OFF Note This function can be used when a regional broad cast of the same network is received 2 Press any one of the DIRECT buttons to call out the regional station 3 If the reception condition of the called out stat
30. ond Fast forward fast backward gt WM Turns mute on and off Switches between playback and pause MUTE Turns mute on and off Switches between playback and pause TA TA on and off DISP Switches among main display clock display PS AS SCN Preset scan Scan play Scan play When pressed and held When pressed and held for 2 seconds Auto store for 1 seconds Folder scan AF RPT AF function on and off Repeat play Repeat play when pressed and held When pressed and held for 1 second REG for 1 seconds Folder function on and off repeat PTY RDM PTY stand by mode on Random play Random play and off When pressed and held for 1 seconds Folder random Some of the corresponding buttons on the main unit and remote control unit have different functions 2 ZONE button is not available DB348RMP 9 The control panel can be detached to prevent theft When detaching the control panel store it in the DCP DETACHABLE CONTROL PANEL case to prevent scratches We recommend taking the DCP with you when leaving the car Removing the DCP 1 Press the FNC button for 1 second or longer to switch off the power 2 Press in the RELEASE button RELEASE button The DCP is unlocked 3 Remove the DCP oo the DCP Insert the right side of the DCP into the main unit 2 Insert the left side of the DCP into the main unit 10 DB
31. s been equipped with self diagnostic functions If a fault arises a warning is issued by various error displays Follow the corrective measures and remove the fault Error Display Corrective Measure ERROR 2 This error display indicates that a fault has arisen in the mechanism of the source unit for example the disc cannot be ejected 2 Check the source unit ERROR 3 This error display indicates that the pickup focus is off because of a scratched disc or some other factor during source unit play gt Check the compact disc ERROR 6 This indicates that the CD s TOC table of contents cannot be read for example because the selected disc is upside down DB348RMP 25 FM Tuner Frequency Range 87 5 MHz to 108 MHz Usable Sensitivity 11 dBf 50 dB Quieting Sensitivity 17 dBf Alternate Channel Selectivity 75 dB Stereo Separation 1 kHz 35 dB Frequency Response 3 dB 30 Hz to 15 kHz AM Tuner Frequency Range MW 531 kHz to 1602 kHz LW 153 kHz to 279 kHz Usable Sensitivity 25 uV CD Player System Compact disc audio system Usable Discs Compact disc Frequency Response 10 Hz to 20 kHz 1 dB Signal to Noise Ratio 100 dB 1 kHz IHF A Dynamic Range 95 dB 1 kHz Harmonic Distortion 0 0196 MP3 Decode Format MPEG 1 2 and 2 5 Layer 3 Sampling rate kHz MPEG 1 32 44 1 48 MPEG 2 16 22 05 24 MPEG 2 5 8 11 025 12 Bit rate kbps 8 16 24 32 40 48 56 64 80 96 112
32. the PTY button during the PTY interrupt broadcast the PTY interrupt is cancelled and the unit returns to PTY standby mode 16 DB348RMP Selecting PTY 1 When you press the PTY button the unit goes into PTY select mode 2 Press any one of the DIRECT buttons Al ternatively turn the ROTARY knob clock wise or counterclockwise to select the de sired PTY Below are the factory default settings stored for the DIRECT buttons PTY item Contents News Information Preset number ENGLISH NEWS INFO POP M SPORT Pop Music Sport CLASSICS Serious Classical Music EASY M Easy Listening Music 3 The PTY select mode is cancelled automati cally 7 seconds after a PTY is selected PTY seek 1 When you press the PTY button the PTY select mode is turned on 2 Select PTY 3 Press the lt d or gt button If you press the gt button the unit seeks a PTY broad cast moving up the frequencies if you press the lt d button it seeks moving down the frequencies If no station with the selected PTY broadcast can be received the unit returns to the PTY select mode RDS Operations PTY preset memory 1 When you press the PTY button the PTY select mode is turned on 2 Turn the ROTARY knob clockwise or coun terclockwise to select the desired PTY The 29 types of PTY below can be selected PTY item ENGLISH NEWS Contents News AFFAIR
33. their Functions aaaanaaaaaaaaaansasaaaaaannsannaaanasaaannaaananananananaaanaaaaaai 6 BT FATTI EE MEE 7 DEB Screen ode sc n oue et rens RS T 7 REMOTE CONTROL Optional Item a iaianiasaniasansasssassassnsansasansanansansanansnnnansnnsania 8 Function of Remote Control Unit Buttons aaaaaaaaaaiaaaiaaaasaaaansaaaaanaasaaaanaaaaaaaaaaaaaanaaaaaaaaaaaaaaa 9 DOP EH MEM TAE eram P E E daa 10 OPERATIONS Basic Operations Radio Operations RDS Operations 15 CD Mode Operations 18 MP3 Mode Operations 19 IN CASE OF DIFFICULTY 24 ERROR DISPLAYS iic te e eet e etate ERR EE Pt ash C P eS 25 SPECIFICATIONS tete nct etd co el A N cn eoe veio 26 1 PRECAUTIONS 1 When the inside of the car is very cold and This unit is applicable for on road 4 wheel 3 Driving on extremely bumpy roads which vehicle purpose only Use for tractor fork cause severe vibration may cause the sound truck bulldozer off road vehicle 2 or 3 to skip wheel motor bicycle marine boat or other special purpose vehicle is not appropriate INFORMATION FOR USERS MO ee E eod Fearn CHANGES OR MODIFICATIONS TO THIS Player Is used soon alter switching on tne PRODUCT NOT APPROVED By THE MANU heater moisture may form on the disc or the FACTURER WILL VOID THE WARRANTY optical parts of the player and proper play back may not be possibl
34. ting Tracks songs Press the lt d or gt button gt Playback will start from the next track lt 4 Playback will start from the beginning of the track currently playing When this button is pressed again the CD will play from the previous track For MP3 mode track selection is only valid in current folder Fast Forward and Fast Backward Press and hold the lt d or P gt button b gt To fast forward lt 4 To fast backward For Audio CD mode pressing the lt d or gt button for 1 second or longer will move forward or backward 5 times faster than normal play and pressing it for 3 seconds or longer will do the operation 30 times faster For MP3 mode pressing the lt d or P gt button for 1 second or longer will move forward or backward 10 times faster than normal play Scan Play Intro Music Scan At Audio CD press the SCN button then the SCN in the display lights on then the CD will play the first 10 seconds of each track of the whole disc Press the SCN button again to dis engage the unit from scan play A scan play will start from the track following the one currently playing Repeat Play At Audio CD press the RPT button then the RPT in the display lights on then the track cur rently playing will be played repeatedly Press the RPT button again to disengage the unit from repeat play Random Play At Audio CD press the RDM button then the RDM in the
35. tion Pressing the ROTARY knob F gt Play current Indicates this folder is a folder File Name Play current file Indicates this is a file name 20 DB348RMP MP3 playing order When selected for play FLD UP DN and MP3 SRCH functions files and folders are accessed in the order in which they were written by the writer Because of this the order in which they are expected to be played may not match the order in which they are actually played You may be able to set the order in which MP3 are to be played by writing them onto a medium such as a CD R with their file names beginning with play sequence numbers such as 01 to 99 depending on your CD writer For example a medium with the following folder file hierarchy is shown below Example of a medium s folder file hierarchy l S 2e 2 e HE lia _ Ae A fo L___ FJ L Ao io Um Bw MP3 Mode Operation Random MP3 CD Scan MP3 CD 1 This function enables you to play all the 1 This function enables you to play the first 10 tracks in the MP3 folder or on the disc in ran seconds of each track in the MP3 folder or dom order the first track of each folder 2 There are 2 types of random play accessible 2 There are 2 types of scan play accessible for for MP3 CDs Random track and Random MP3 CD Scan track and Scan folder folder Scan access Function Display Press the SC
36. tons for 2 seconds or longer to store the current station into preset memory 14 DB348RMP Auto store Auto store is a function for storing up to 6 sta tions that are automatically tuned in sequentially If 6 receivable stations cannot be received a previously stored station remains unoverwritten at the memory position Notes The only FM band that can store the stations will automatically be stored in FM3 When the auto store is performed the station pre viously stored in the memory at that position is overwritten If there are fewer than 6 stations with good recep tion the stations previously stored at the remain ing DIRECT buttons are not overwritten A station already stored in one of DIRECT but tons cannot be stored in another DIRECT but tons 1 Press the BND button and select the de sired band FM or AM MW LW 2 Press and hold the PS AS button for 2 sec onds or longer The stations with good recep tion are stored automatically to the preset channels If auto store is performed in the FM bands the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations Preset scan Preset scan receives the stations stored in pre set memory in order This function is useful when searching for a desired station in memory 1 Press the PS AS button 2 When a desired station is tuned in press the PS AS button again to continue receiving that station Note Be
Download Pdf Manuals
Related Search