Chief Manufacturing Doll SSM-295 User's Manual
Contents
1. INSTALLATION INSTRUCTIONS SSM 295 Interface Bracket SSM 295 Interface Brackets are designed for use with the MSP EIK130 and MSP EIK230 short throw wall mounts See the specific installation instructions provided with the mount for additional installation information Unpack carton and verify kit contents If any listed parts are missing immediately contact a Chief Customer Service representative WARNING IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT substitute hardware Use only hardware supplied by manufacturer 1 Interface Bracket 4 Screw Phillips Flat Head Machine M4 x 20mm 4 Spacer 500 x 316 x 500 4 Screw Phillips Flat Head Machine M5 x 25mm SF O M4 screw locations Pag M5 screw locations Va Towards front of projector SSM 295 Figure 1 NOTE All appropriate screws See Figure 1 come pre installed DO NOT attempt to substitute and USE ONLY this pre installed hardware for interface bracket installation Installation Instructions WARNING OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT over tighten screws when installing interface brackets 1 Turn projector upside down on a flat surface Place spacers over appropriate threaded inserts on bottom of projector Place the interface bracket onto the spacers aligning the mounting holes in the bracket with2. the spacers and threaded inserts in the bottom of the projector and ensuring that triangle in bracket points towards front of projector 4 Determine proper size screws to use with projector IMPORTANT Using screws of improper size may damage the projector Properly sized screws will easily and completely thread into projector threaded inserts See Figure 1 for proper placement of M4 and M5 screws 5 Position mounting screws through bracket spacers and into appropriate threaded inserts in the projector Tighten all fasteners at this time securing the bracket to the projector Chief is a registered trademark of Milestone AV Technologies All rights reserved res o o ST Consument Milestone AV Technologies and its affiliated corporations and subsidiaries collectively Milestone intend to make this manual accurate and complete However Milestone makes no claim that the information contained herein covers all details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind Milestone makes no representation of warranty expressed or implied regarding the information contained herein Milestone assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document A o Chief Manufacturing a products di
3. vision of Milestone AV Technologies 8800 002108 Rev01 ICJ ll E 8401 Eagle Creek Parkway Savage MN 55378 2011 Milestone AV Technologies e P 800 582 6480 952 894 6280 F 877 894 6918 952 894 6918 a Duchossois Group Company Our Mounts Your Vision 08 11
Download Pdf Manuals
Related Search