Avaya 4600 Series IP Telephones Application Note
Contents
1. These Application Notes describe the steps for configuring the ProCurve 2626 PWR to provide inline Power over Ethernet to the Avaya PDs Avaya 9600 Series IP Telephones Avaya 4600 Series IP Telephones Avaya 5600 Series IP Telephones Avaya one X Quick Edition G10 PSTN Gateway and Avaya AP 8 Access Point Features and functionality were successfully validated TMA Reviewed Solution amp Interoperability Test Lab Application Notes 12 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc 11 Additional References This section references the Avaya and HP product documentation that are relevant to these Application Notes The Avaya product documentation can be found at http support avaya com The HP product documentation can be found at http www hp com rnd support manuals TMA Reviewed Solution amp Interoperability Test Lab Application Notes 13 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc Appendix A Description of fields for show power management brief e Port Lists all PoE capable ports on the switch Power Enable Shows Yes for ports enabled to support PoE the default and No for ports on which PoE is disabled e Priority Lists the power priority Low High and Critical configured on ports enabled for PoE e Configured Type Lists the type of PD connected to each port For example Telephone Webcam Wireless Other e Detection Status2. Voltage The total voltage in dV being delivered to PDs Power The total power in mW being delivered to PDs Configured Type Shows the type of PD detected on the port Power Class Shows the power class of the PD detected on the indicated port Classes include 0 0 44w to 12 95W 1 0 44w to 3 84W 2 3 84w to 6 49W 3 6 49w to 12 95W 4 reserved MPS Absent Cnt This value shows the number of times a detected PD has no longer requested power from the port Each occurrence generates an Event Log message MPS refers to the Maintenance Power Signature Short Cnt Shows the number of times the switch provided insufficient current to a connected PD Current The total current in mA being delivered to PDs TMA Reviewed Solution amp Interoperability Test Lab Application Notes 15 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc 2006 Avaya Inc All Rights Reserved Avaya and the Avaya Logo are trademarks of Avaya Inc All trademarks identified by and are registered trademarks or trademarks respectively of Avaya Inc All other trademarks are the property of their respective owners The information provided in these Application Notes is subject to change without notice The configurations technical data and recommendations provided in these Application Notes are believed to be accurate and dependable but are presented without express or implied warranty Users are responsible for
3. IEEE 802 3af standard defines the mechanisms for Power Sourcing Equipment PSE such as PoE enabled Ethernet switches to detect classify and supply power to Powered Devices PDs such as PoE enabled IP telephones In the compliance tested configuration described in these Application Notes the ProCurve 2626 PWR Switch is configured to supply inline PoE to Avaya PDs There is no need for ProCurve specific configuration on Avaya Communication Manager Avaya IP Office or Avaya one X Quick Edition G10 PSTN Gateway to support this solution Refer to http support avaya com for station administration As illustrated in Figure 1 the Avaya PDs covered in these Application Notes include the following Avaya one X Quick Edition G10 PSTN Gateway Avaya 9630 one X Deskphone Edition IP Telephone with and without 24 Button Expansion Module Avaya 9620 one X Deskphone Edition IP Telephone Avaya 4601SW IP Telephone Avaya 4602SW IP Telephone Avaya 4610SW IP Telephone Avaya 4620 IP Telephone Avaya 4620SW IP Telephone Avaya 4621SW IP Telephone Avaya 4622SW IP Telephone Avaya 4625SW IP Telephone Avaya 5602SW IP Telephone Avaya 5610SW IP Telephone Avaya 5620SW IP Telephone Avaya 4610 one X Quick Edition IP Telephone Avaya 4621 one X Quick Edition IP Telephone Avaya AP 8 Wireless Access Point TMA Reviewed Solution amp Interoperability Test Lab Application Notes 2 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE do
4. Searching The port is trying to detect a PD connection Delivering The port is delivering power to a PD Disabled PoE support is disabled on the port Fault The switch detects a problem with the connected PD e Power Class Shows the 802 3af power class of the PD detected on the indicated port Classes include 0 0 44w to 12 95W 1 0 44w to 3 84W 2 3 84w to 6 49W 3 6 49w to 12 95W 4 reserve TMA Reviewed Solution amp Interoperability Test Lab Application Notes 14 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc Appendix B Description of fields for show power management lt portlist gt Power Enable Shows Yes for ports enabled to support PoE the default and No for ports on which PoE is disabled Priority Lists the power priority Low High and Critical configured on ports enabled for PoE Detection Status Searching The port is available to support a PD connection Delivering The port is delivering power to a PD Disabled PoE support is disabled on the port Fault The switch detects a problem with the connected PD Over Current Cnt Shows the number of times a connected PD has attempted to draw more than 15 4 watts Each occurrence generates an Event Log message Power Denied Cnt Shows the number of times PDs requesting power on the port have been denied due to insufficient power available Each occurrence generates an Event Log message
5. an overview of PoE status on all ports enter the command show power management brief Verify that PoE support is enabled and view power class information A detailed explanation of each field is in Appendix A ProCurve Switch 2626 PWR show power management brief Status and Counters Port Power Status Power Configured Detection Power Port Enable Priority Type Status Class www www SS 1 Yes Low searching 0 2 Yes Low searching 0 3 es Low Searching a 4 Yes Low searching Oo 5 Yes Low Delivering 2 6 Yes Low Delivering 2 F Yes Low Delivering 2 3 Tes Low Delivering 3 3 Yes Low Delivering 2 10 Yes Low Delivering 2 ii Yes Low Delivering z 12 Yes Low Delivering 2 13 Yes Low Delivering 2 14 Yes Low Delivering 2 15 Yes Low Delivering 2 16 Yes Low Delivering 2 17 TES Law Delivering 0 16 Yes Low Delivering 2 19 Yes Low Delivering 2 20 Yes Low Delivering 0 21 Yes Low searching 0 22 Tes Low Searching Oo 23 Yes Low Searching o 24 Yes Low searching 0 Display the PoE Status on a specific port A detailed explanation of each field is in Appendix B ProCurve Switch 2626 PWR show power management lt portlist gt Status and Counters Port Power Status for port 5 Power Enable Yes Priority Low Configured Type Detection Status Delivering Power Class 2 Over Current Cnt O HPS Abs
6. their application of any products specified in these Application Notes Please e mail any questions or comments pertaining to these Application Notes along with the full title name and filename located in the lower right corner directly to the Avaya DeveloperConnection Program at devconnect avaya com TMA Reviewed Solution amp Interoperability Test Lab Application Notes 16 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc
7. AVAYA Avaya Solution amp Interoperability Test Lab Application Notes for the ProCurve 2626 PWR Switch by HP Supporting Power over Ethernet with Avaya Communication Manager Avaya IP Office Avaya one X Quick Edition G10 PSTN Gateway Avaya AP 8 Access Point and Avaya IP Telephones Issue 1 0 Abstract These Application Notes describe the procedures for configuring the ProCurve 2626 PWR Switch by HP to provide inline Power over Ethernet PoE to Avaya 4600 5600 9600 Series IP Telephones registered to Avaya Communication Manager Avaya IP Office and the Avaya one X Quick Edition G10 PSTN Gateway During compliance testing Avaya IP Telephones successfully obtained power and transferred data over standard Ethernet cables from the ProCurve Switch Information in these Application Notes has been obtained through compliance testing and additional technical discussions Testing was conducted via the DeveloperConnection Program at the Avaya Solution and Interoperability Test Lab TMA Reviewed Solution amp Interoperability Test Lab Application Notes 1 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc 1 Introduction Power over Ethernet PoE allows both power and data to be simultaneously carried over standard Ethernet cables PoE enabled Ethernet switches can supply power directly to Ethernet devices thereby simplifying installation and removing the need for separate power supplies for those devices The
8. Curve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 150 name vlanPSTN Assign an IP address to vlanPSTN on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 150 ProCurve Switch 2626 PWR vlan 150 ip address 10 1 150 254 24 Assign ports to vlanPSTN on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 150 ProCurve Switch 2626 PWR vlan 150 untagged 17 19 Configure vlan2 on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 2 name vlan2 Assign an IP address to vlan2 on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 2 ProCurve Switch 2626 PWR vlan 2 ip address 10 1 2 1 24 Assign ports to vlan2 on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 2 ProCurve Switch 2626 PWR vlan 2 untagged 3 4 Interoperability Compliance Testing The interoperability testing focused on verifying PoE interoperability between the ProCurve 2626 PWR Switch Avaya IP Tel
9. c Avaya IP Office Manager DHCP Server 10 1 2 250 N Vlan2 RS N Avaya 58300 Media Server SS IA with G700 Media Gateway Proc 10 1 1 1 24 PT 3 e 2 es mean NUN Avaya IP Office IP406V2 1 Controller IP 192 168 42 1 24 VLAN 90 20 Windows XP with Avaya AP 8 2 Avaya IP Softphone 5 ProCurve 2626 PWR Avaya one X G10 by HP PSTN Gateway Err Avaya 5602SW IP Telephone As Avaya 5620SW 13 Be E IP Telephone E N Avaya 4610SW Avaya 4621SW x one X Quick one X Quick vianIPO pesca Avaya 9630 Edition Edition one X Deskphone IP Telephone IP Telephone Edition IP Telephone vlanPSTN 9 with and without 24 button Expansion module CE Avaya 4622SW IP Telephone 14 vlan vianCM tag 10 10 1 1 0 24 Ping vlan vianIPO tag 42 192 168 42 0 24 40 F vlan vianPSTN tag 150 10 1 150 0 24 Vian vian2 tag 2 10 1 2 0 24 Avaya 9620 Vian vian90 tag 90 10 1 90 0 24 Avaya 4621SW one X Deskphone IP Telepho Edition SORRIA IP Telephone la 11 15 LJ 4 Avaya 4620SW Avaya 4610SW IP Telephone IP Telephone 12 16 Avaya 4601SW Avaya 4602SW IP Telephone vlanCM IP Telephone Figure 1 PoE Interoperability between ProCurve 2626 PWR Avaya IP Telephones and Avaya one X Ouick Edition G10 PSTN Gateway 3of 16 ProCurve2626PoE doc Solution amp Interoperability Test Lab Application Notes 2006 Avaya Inc All Rights Reserved TMA Reviewed SPOC 11 30 2006 2 Equipment and Software Validated The following e
10. ent Cnt oO Power Denied Cnt O Short Cnt 0 Voltage 493 dV Current 54 m Power 4141 my TMA Reviewed Solution amp Interoperability Test Lab Application Notes 11 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc Disable PoE on a specific port ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config no interface 1 power Enable PoE on a specific port ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config interface 1 power Disable PoE on all ports ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config no interface 1 24 power Enable PoE on all ports ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config interface 1 24 power 8 Troubleshooting e Ifthe PD does not power up check the inline power settings Enter show power management brief e Ifthe PD does not power up check the inline power configuration Enter show power management 1 24 Check to see if there is a limit or priority setting on the port If the output shows that the Detection Status is at Fault there may be a priority setting or insufficient available power to power the PD The ProCurve 2626 PWR provides up to 15 4 W per port For more information refer to http www hp com rnd support manuals 9 Support For technical support on HP products consult the support pages at http www hp com rnd 10 Conclusion
11. ephones and the Avaya one X Quick Edition G10 PSTN Gateway TMA Reviewed Solution amp Interoperability Test Lab Application Notes 7 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc The power tests included verification of the following after the powered device was connected to the switch e Successful boot operation e For Avaya IP Telephones successful registration with Avaya Communication Manager or Avaya IP Office the Avaya 5600 Series IP Telephones are only supported on IP Office e Completion of a test call and raising speakerphone volume to maximum value e Connecting a mix of Avaya IP Telephones to the switch power cycling the switch and verifying successful boot operation and registration of the devices 5 General Test Approach The general test approach was to e Connect the Avaya IP Telephones and Avaya one X Quick Edition G10 PSTN Gateway to ports on the ProCurve Switch and verify that the PDs successfully booted e Make calls with background data to verify that power and data can be simultaneously carried on the PoE connections 6 Test Results All Power over Ethernet test cases completed successfully The ProCurve 2626 PWR Switch successfully provided inline power to all of the Avaya IP telephones and one X Quick Edition G10 PSTN Gateway TMA Reviewed Solution amp Interoperability Test Lab Application Notes 8 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProC
12. quipment and software firmware were used for the sample configuration provided Equipment Software Firmware Avaya IP Office IP406V2 3 217 Avaya S8300 Media Server with a G700 Media Gateway Avaya Communication Manager 3 1 2 Avaya G700 Media Gateway 25 28 0 Avaya IP Office Manager 3 207 Avaya AP 8 Wireless Access Point 3 1 0 Avaya IP Softphone 5 2 spl Avaya one X Quick Edition G10 PSTN Gateway 2 0 Avaya 9630 one X Deskphone Edition IP Telephone with and 1 1 without 24 button module Avaya 9620 one X Deskphone Edition IP Telephone 1 1 Avaya 4601SW IP Telephone 23 Avaya 4602SW IP Telephone 23 Avaya 4610SW IP Telephone 2 6 Avaya 4620SW IP Telephone 2 6 Avaya 4621SW IP Telephone 2 6 Avaya 4622SW IP Telephone 2 6 Avaya 4625SW IP Telephone 2 6 Avaya 5610SW Telephone 2 3 Avaya 5620SW Telephone 23 Avaya 5602SW Telephone 23 Avaya 4610SW one X Ouick Edition IP Telephone 2 0 Avaya 4621SW one X Quick Edition IP Telephone 2 0 ProCurve 2626 PWR by HP model number J8164A H 08 98 TMA Reviewed SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved Solution amp Interoperability Test Lab Application Notes 4 of 16 ProCurve2626PoE doc 3 Configuration of the ProCurve 2626 PWR switch Inline Power over Ethernet PoE is supported on the ProCurve 2626 PWR Switch By default PoE support is enabled on the system and on all ports Log into the ProC
13. urve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 42 ProCurve Switch 2626 PWR vlan 42 ip address 192 168 42 254 24 ProCurve Switch 2626 PWR vlan 42 ip helper address 10 1 2 250 Assign ports to vlanIPO on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 42 ProCurve Switch 2626 PWR vlan 42 untagged 1 5 7 Configure vlan90 on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 90 name vlan90 Assign an IP address and DHCP helper address to vlan90 on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 90 ProCurve Switch 2626 PWR vlan 90 ip address 10 1 90 254 24 ProCurve Switch 2626 PWR vlan 90 ip helper address 10 1 2 250 Assign ports to vlan90 on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 90 ProCurve Switch 2626 PWR vlan 90 untagged 20 TMA Reviewed Solution amp Interoperability Test Lab Application Notes 6 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc Configure vlanPSTN on the Pro
14. urve 2626 PWR Switch Connect to the ProCurve 2626 PWR Switch Log in using the appropriate Login ID and Password Login Password ProCurve Switch 2626 PWR Enable Routing ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ip routing Configure vlanCM on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 10 name vlanCM Assign an IP address and DHCP helper address to vlanCM on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 10 ProCurve Switch 2626 PWR vlan 10 ip address 10 1 1 254 24 ProCurve Switch 2626 PWR vlan 10 ip helper address 10 1 2 250 Assign ports to vlanCM on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 10 ProCurve Switch 2626 PWR vlan 10 untagged 2 8 16 TMA Reviewed Solution amp Interoperability Test Lab Application Notes 5 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc Configure vlanIPO on the ProCurve 2626 PWR Switch ProCurve Switch 2626 PWR configure ProCurve Switch 2626 PWR config ProCurve Switch 2626 PWR config vlan 42 name vlanIPO Assign an IP address and DHCP helper address to vlanIPO on the ProC
15. urve2626PoE doc Table 1 lists the IEEE 802 3af class allocated power and measured power of the Avaya IP Telephones and Avaya one X Quick Edition G10 PSTN Gateway when connected to the ProCurve 2626 PWR switch The power listed as measured by the ProCurve PoE switch is for PDs under idle conditions Cable length and impedance affects power usage so the measurements listed here may vary based on the cable used Avaya Powered Device 802 3af Volts Measured Power Watts Class Idle 3 1 4602SW 98 3 4610SW 9 3 1 46208W 9 2 494 4 0 4621SW a2 494 4 7 462SW T2498 5 0 46255W 8 8 0 5602SW 9 3 0 5610SW 9S 3 1 5620SW 9 4 0 Beo 2 493 4 7 9630 S AR S i 4 8 9630 with 24 button module 2 492 5 1 4610 one X Quick Edition 2 494 31 4610 one X Quick Edition 2 493 5 0 one X Quick Edition G10 49 5 4 1 Psm AP 8 Wireless Access Point 0 493 3 5 Table 1 rPIRIRIP I IRIR rP SIRIHR IrPIrMI b Note To tell the difference between a 4620SW Class 3 IP Phone that was made before November At 2004 and a 4620SW Class 2 IP Phone made after November gh 2004 look at the bottom right corner of the phone at the mic input The Class 2 phones have one hole and the Class 3 phones have two holes for the mic input TMA Reviewed Solution amp Interoperability Test Lab Application Notes 9 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc Table 2 summarizes the po
16. wer at the PSE for the IEEE 802 3af classes PSE Output Max Power W 0 isa 1 Reserved Treat as Class 0 Table 2 7 Verification Steps Inline Power over Ethernet PoE is supported on the ProCurve 2626 PWR Switch By default PoE support is enabled on the system and on all ports The following steps may be used to verify the configuration for Power over Ethernet e Ensure that PoE has not been disabled on the system or the ports that serve the PDs by entering show power management brief e Connect the Avaya PD to a PoE enabled port on the ProCurve 2626 PWR Switch and verify that the PD powers on successfully If the PD does not power on enter the command show inline power info detail ports lt portlist gt e For the Avaya 4600 5600 9600 Series IP Telephones verify successful registration and complete phone calls to other phones assumes the IP telephone has been configured with the correct IP and call control information To view the inline power information for the ProCurve 2626 PWR switch enter the command show power management Verify POE is enabled ProCurve Switch 2626 PWR show power management Status and Counters System Power Status Maximum Power 406 W Operational Status On Power In Use 61 W 6W Usage Threshold 80 TMA Reviewed Solution amp Interoperability Test Lab Application Notes 10 of 16 SPOC 11 30 2006 2006 Avaya Inc All Rights Reserved ProCurve2626PoE doc To display
Download Pdf Manuals
Related Search