Altronix AL400ULACM power extension
Contents
1. O 0 0 0 0 0 0 19 25 exe 000 13 53 O ae ARS as 000000 MOMO MMS D 000000 LY yy DN NU AN WY Altronix Corp 140 58th Street Brooklyn NY 11220 718 567 8181 888 258 7669 altronix com2. MN Altronix AL400ULACM AL400ULACMCB Power Supply Chargers w Multi Output Access Power Controllers Rev DSAL400ULACM A25F Overview e The AL400ULACM AL400ULACMCB converts an 115VAC 60Hz input into eight 8 independently controlled 12VDC or 24VDC Fail Safe and or Fail Secure outputs with a total of 4 amp 12VDC or 3 amp 24VDC continuous supply current Outputs are activated by an open collector sink or normally open NO dry trigger input from an Access Control System Card Reader Keypad Push Button PIR etc These units will route power to a variety of access control hardware devices including Mag Locks Electric Strikes Magnetic Door Holders etc The outputs will operate in both Fail Safe and or Fail Secure modes The units are designed to be powered by one common power source factory installed which will provide power for both the board operation and locking devices or two 2 totally independent power sources one 1 providing power for board operation and the other for lock accessory power The FACP Interface enables Emergency Egress Alarm Monitoring or may be used to trigger other auxiliary devices The fire alarm disconnect feature is individually selectable for any or all of the eight 8 outputs AL400ULACM e Eight 8 independently controlled fuse protected outputs Specifications AL400ULACMCB e Eight 8 independently controlled PTC protected outputs 12VDC or 24VDC outputs 12VDC 4
3. Polarity reversal input from FACP signaling circuit Alarm output relay indicates that FACP input is triggered form C contact rated 1 amp 28VDC not evaluated by UL Green LED indicates when FACP disconnect is triggered Built in charger for sealed lead acid or gel type batteries AL400ULXB Power Supply Board maximum charge current 7 amp Automatic switch over to stand by battery when AC fails AC input and DC output LED indicators Zero voltage drop when unit switches over to battery backup AC failure condition Short circuit and thermal overload protection AC fail supervision form C contact Battery fail and battery presence supervision form C contact Enclosure accommodates up to two 2 12AH batteries Product weight AL400ULACM 11 1 lbs AL400ULACMCB 10 1 lbs Shipping weight AL400ULACM 9 8 lbs AL400ULACMCB 11 4 lbs Agency Approvals UL Listed for Access Control Systems Units MEA MEA NYC Department of UL 294 Approved Buildings Approved CUL Listed CSA Standard C22 2 CSFM California State Fire h No 205 M1983 Signal Equipment Marshal Approved Enclosure Dimensions 15 5 H x 12 W x 4 5 D 12 2 25 3 68 4 56 LE AN D ANA 7 YZ y 4 5 1 22 875 9 97 1 3 1 22 1 1 OROORO ORON o olo 0 0 0 a N OOO E Ob 0000 E o olo ooo y OOOO ovolo ooo oel oC P0000 o p o o oo V
4. amp supply current or 24VDC 3 amp supply current Class 2 Rated power limited outputs Power supply input options a One 1 common power input for ACM8 ACMS8CB and lock power factory installed Two 2 isolated power inputs One 1 to power the ACM8 ACMS8CB and one 1 for lock accessory power external power supply is required Current is determined by the power supply connected not to exceed a maximum of 10 amp total Eight 8 Access Control System trigger inputs Input options a Eight 8 normally open NO inputs b Eight 8 open collector inputs c Any combination of the above Eight 8 independently controlled outputs Output options b a Eight 8 Fail Safe and or Fail Secure power outputs b Eight 8 form C 5 amp rated relay outputs AL400ULACM only c Any combination of the above AL400ULACM only Eight 8 auxiliary power outputs unswitched Output ratings Fuses are rated 3 5 amp AL400ULACM PTCs are rated 2 5 amp AL400ULACMCB ACMS8 board main fuse is rated at 10 amp Input 115VAC 60Hz rated 1 9 amp Filtered and electronically regulated outputs built in power supply Red LEDs indicate outputs are triggered relays energized Fire Alarm disconnect latching or non latching is individually selectable for any or all of the eight 8 outputs Fire Alarm disconnect input options a Normally open NO or normally closed NC dry contact input b
Download Pdf Manuals
Related Search