KRAM Xpress Mute Cable FWD Opel
Contents
1. Xpress mutecables Diagram Xpress mutecable 85xxx The diagram shows the connector from the cable entry side FWD Block Pin Description Colour Warning No CHECK the configuration Grey Black of the constant 12v and Grey Black the ignition wire as the in some models can be switch If the wires is switch it can be correc ted using the two bullit o foes for connctors Cr ravpermanent fea o em fa Xpress mutecables Instruction for Xpress mutecable 85xxx Made in Denmark by Kram Telecom A S Carkitbox Xpress mutecables Product description Xpress cable 85xxx Xpress mutecables are designed to interface between the car radio and vehicle harness It enables the use of one of the car speakers when answering making calls from your cell phone It also provides power supply for the handsfree kit and mutes the radio in order to let the conversation be heard Normally no vehicle cables needs to be cut Speaker function This is achieved by connecting the carkit di rectly to one of the car speakers By using the carkits built in relays the telephone conversation is send through the car speaker while the radio is muted This way you will achieve a perfect hand free sound without interference from the car ra dio Power supply of the carkit All Xpress mutecables are deliv ered with a power connector for the carkit that way you avoid cutting the cars wiring loom Note 1 This cablese2. t is designed to plug directly into the FWD Audio Profi and Audio 2000 carkits Use of this Xpress mute cable with other carkits require a Carkit specifik Xpress adap tor cable Note 2 The cableset is only to be used for cars without sepa rate amplifiers or active loudspeakers See our complete Xpress program on www kram dk Xpress mutecables Installation description Xpress cable 85xxx Ist Remove the radio radio unit from the car following the manufacturers guide 2nd Disconnect the radio connector from the radio 3rd Connect the female end of the Xpress mutecable to the cars wiring loom and connect the male end to the connector at the back of the radio Ard Check the configuration of the permanent plus and the ignition power supply wires as they in some vehicles can be switched The Ignition wire is the blue wire in the 8 way FWD connector And the permanent is the red wire 5rd Check the mute position The mute position can varies according to each model and year of the vehicle but it is usually found at a prefitted position chosen by Kram Tele com The mute wire is the yellow wire in the 8 way FWD connector 6rd Connect the telephone to the carkit and check if the carkit functions correctly 7rd Refit the radio
Download Pdf Manuals
Related Search