LSI LSI00058 MegaRAID SAS 8344ELP SAS RAID Adapter - 128MB
Contents
1. MegaRAID LSIiBBU01 Connec tion to a MegaRAID Controller via alle y gt LSI Cable Installation Instructions The MegaRAID LSIiBBUO1 is an intelligent battery backup module that protects the integrity of the cached data on a MegaRAID controller for up to 72 hours in the event of a complete AC power failure The LSIIBBUO1 is used with the following RAID controllers e MegaRAID SAS 8308ELP e MegaRAID SAS 8344ELP e MegaRAID SAS 84016E e MegaRAID SATA 300 8ELP e MegaRAID SATA 300 8XLP The LSIiIBBU0O1 does not connect directly to these MegaRAID controllers Instead it uses the supplied 20 pin 10 inch cable to connect to a controller There are black dots on the connectors to help you install them properly Insert the cable connectors into the controller connector and the iBBU connector so that the black dots are aligned as shown in the example in Figure 1 The battery backup unit must be mounted inside the chassis within 10 inches of the RAID controller Because server and workstation chassis vary from vendor to vendor there is no standard mounting option that is compatible with the various system configurations Therefore the LSIiBBUO1 battery kit contains only the battery and the cable allowing VAR s and chassis manufacturers to customize the location of the remote battery to provide the most flexibility within various environments Important For more information about the LSIiBBUO1 battery backup unit refer to the M2. anies Copyright 2006 2008 by LSI Corporation All rights reserved LSI Corporation reserves the right to make changes to any products and services herein at any time without notice LSI does not assume any responsibility or liability arising out of the application or use of any product or service described herein except as expressly agreed to in writing by LSI nor does the purchase lease or use of a product or service from LSI convey a license under any patent rights copyrights trademark rights or any other of the intellectual property rights of LSI or of third parties
3. egaRAID Battery Backup Unit User s Guide on the MegaRAID Universal Software Suite CD The LSIiBBU01 is compliant with the Smart Battery Data Specification which relieves the host system from the responsibility of communicating battery information and charging the battery You can view information about the LSIiBBU0O1 such as battery temperature and voltage in the BIOS Configuration Utility and the WebBIOS Configuration Utility A AU EAE N 80 00123 01B Figure 1 LSIiBBU01 Connected to the MegaRAID SATA 300 8XLP RAID Controller 85001 02 SSS gt p Edge of Mother Board Kar bit Figure 2 shows the mechanical drawing of the LSIIBBUO1 Figure 2 Mechanical Drawing of LSIiBBUO1 NOTES I ALL PLATED HOLES 83 AND alia HOLES ARE 802 i TOLERANCE 2 OVERALL PWG THICKNESS TO BE 352 007 3 ALL DIMENSIONS ARE IN INCHES 4 MANUFACTURE TO IPC A 600 F UNLESS OTHERWISE STATED IN LSI LOGIC SPECIFICATION a Laimai B GONORE jo OOLeS a HANNES i A ao Iga 2 0 575 2PL 3 290 3 146 3 88 X DATUM 4 850 4 9185 Naw Lsis Find a list of LSI Corporation s U S distributors international distributors sales offices and design resource centers on the LSI web site at http www si com LSI the LSI logo design and MyStorage are trademarks or registered trademarks of LSI Corporation All other brand and product names may be trademarks of their respective comp
Download Pdf Manuals
Related Search