takeMS MiniSD 2GB
Contents
1. J the best reason for saving Technical Datasheet Mini Secure Digital Card ADAPTER ow SD SPI Mode Mode 10 type Pin Name 1 Description Name 1O Type Description 1 CD DAT3 1 O PP Card Detect Data Line Bit 3 CS Chip Select Active Low 2 CMD PP Command Response DI Data In 3 VSS 5 Supply Voltage Ground VSS 5 Supply Voltage Ground 4 Vdd S Supply Voltage Vdd S Supply Voltage 5 CLK Clock SCLK Clock 6 VSS S Supply Voltage Ground VSS S Supply Voltage Ground 7 DATO I O PP Data Line Bit 0 DO O PP Data Out 8 DAT1 I O PP Data Line Bit 1 RSV 9 DAT2 I O PP Data Line Bit 2 RSV 10 NC I O PP For Future Use NC For Future Use 11 NC I O PP For Future Use NC For Future Use 1 S Power supply input O Output using push pull drivers PP using push pull drivers 2 The extended DAT Lines Datl Dat3 are input on power up They start to operate as Dat lines after SET BUS WIDTH commana The Host shall keep its own Datl Dat3 lines in input mode as well while they are not used It is defined so in order to keep compatibility to MultiMedia Cards 3 After power up this line is input with 50Kohm pull up can be used for card detection or SPd mode selection The pull up should be diconnected by user during regular data transfer with SET _CLR_CARD_Detect ACMD42 command 4 NC Storage Capacities Item Description Physical Dimension Specifications Type Measurement Length 21 5mm 0 1 mm Widt2. h 20 0mm 0 08mm Thickness 1 4mm 0 1mm Weight 1 0g max Units in mm Power Consumption Read lt 30mA Write lt 30mA Standby lt 100uA Performance MTBF 1 000 000 h Data Transfer Rate up to 160x Sustained Read up to 40x Sustained Write up to 30x Depending on system config Temperature Operating 10 C to 55 C Humidity Operating 8 to 95 non condensing Vibration Operating 15G peak to peak Max Operating 40G 1l1ms Env Specs Order No MSXXXSDC SD1 Web www takems com E Mail info takems com Tel 49 7667 9414 0 Flash Cards Fax 49 7667 9414 444 USB Flash
Download Pdf Manuals
Related Search