Philips AZB500B
Contents
1. You can program a maximum of 20 DAB radio stations Check with local retailer or go to www WorldDAB org for applicable DAB radio frequencies in your area AUDIO IN CD RADIO OFF For the first time use 1 Switch the source selector to RADIO and switch the band selector to DAB L gt Full scan menu is displayed 2 Press OK to activate the automatic search L gt This product automatically stores radio stations with sufficient signal strength EN 11 L gt After the search is complete the first stored radio station is broadcast automatically 3 Press M4 PPI to select a station and then start listening Program radio stations 1 Tune to a DAB radio station 2 Press PROG to activate the programming 3 Press 4 bhlto select a preset sequence number 4 Press PROG to confirm L gt The radio station is stored with the selected sequence number 5 Repeat steps 1 4 to program more radio stations Note e Ifyou store a radio station with the sequence number of another one the earlier one is overwritten Display DAB information On the display of DAB broadcasting the first line shows station name and the second line shows the service information for the current station Press DISPLAY repeatedly to cycle through the following information if available Dynamic label segment DLS Signal strength e Program type PTY e Ensemble name e Frequency Signal er2. audio CDs e CD Recordables CD R CD Rewritables CD RW 1 Switch the source selector to CD L gt CD displays on the screen 2 Open the CD compartment 3 Insert a CD with the printed side facing up and close the CD lid gently L gt Your CD sound machine starts to play automatically e To select a track press I44 PPL To pause CD play press H L gt P gt and track number flash To resume CD play press I again e To stop CD play press ll Play options Control play In CD mode you can control play through the following operations 44 dh Press skip to the previous next track Hold search within play then release to resume play Pil Start or pause play E Stop play PROG Program tracks VOLUME Adjust volume MODE Select a play mode eo Play the current track repeatedly eau Play all tracks repeatedly 2 Repeat all tracks randomly To return to normal play press MODE repeatedly until the repeat icons disappear Tip Only 9 and CHALL can be selected when you play the programmed tracks Program tracks In CD mode you can program a maximum of 20 tracks 1 Press lll to stop playback 2 Press PROG to activate the program mode 3 Press M4 PPI to select a track number then press PROG to confirm 4 Repeat steps 3 to program more tracks 5 Press PII to play the programmed tracks L gt D
3. list but have no service in your area 1 Press OK to access the PRUNE menu 2 Press 44 PPI to select an option N Return to the previous menu Y Remove invalid stations from the station list 3 Press OK to confirm the selection System menus 1 Press OK to access system menu 2 Press 4 W to to select a sub menus e For details refer to the section Use system menus 7 Use system menus With the system menus you can RESET Reset the product to factory default status UPGRADE Upgrade the software SWVER Check the version of current software of this product Reset the product 1 Press OK to display the options 2 Press 44 PPI to select an option NJ Return to the previous menu Y Reset the product to factory default status 3 Press OK to confirm the option Check the current software version Press OK to display the version of current software EN 13 8 Product information Note Product information is subject to change without prior notice Specifications Amplifier Rated Output Power 2x1 W RMS Frequency Response 125 16000 Hz 3dB Signal to Noise Ratio gt 55 dBA Total Harmonic Distortion lt 1 Audio in Input 650 mV RMS Disc Laser Type Semiconductor Disc Diameter 12cm 8cm Support Disc CD DA CD R CD RW Audio DAC 24Bits 44 1kHz Total Harmonic lt 1 D
4. Always there to help you Register your product and get support at www philips com support a S Question Contact AZB500B AZB500W Philips User manual PHILIPS Contents 1 Important 2 Product information 14 Safety 2 Specifications 14 Notice 2 Maintenance 15 2 Your CD Soundmachine 4 Troubleshooting 15 Introduction 4 What s in the box 4 Overview of the main unit 4 3 Get started 6 Connect power 6 Turn on 7 Turn off 7 4 Play 8 Play a CD 8 Play options 8 Play from an external device 9 5 Listen to FM radio stations 10 Tune to FM radio stations 10 Program FM radio stations automatically 10 Program FM radio stations manually 10 Select a preset radio station 10 Adjust FM settings 11 6 Listen to DAB radio stations 11 Listen to DAB radio stations 11 For the first time use 11 Program radio stations 12 Display DAB information 12 Use DAB menus 12 7 Use system menus 13 Reset the product 13 Check the current software version 13 EN 1 Important Safety e Read these instructions e Follow all instructions Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat e Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the poin
5. air the system yourself If you encounter problems when using this device check the following points before requesting service If the problem remains unsolved go to the Philips Web page www philips com support When you contact Philips make sure that the device is nearby and the model number and serial number are available No power e Ensure that the Mains cord is connected securely e Ensure that there is power at the AC Mains e Ensure that the batteries are inserted correctly No sound or poor sound e Adjust the volume No response from the unit Disconnect and reconnect the AC power plug then turn on the system again As a power saving feature the unit switches off automatically 15 minutes after track play reaches the end and no control is operated No disc detected e Insert a disc e Check if the disc is inserted upside down e Wait until the moisture condensation at the lens has cleared e Replace or clean the disc Use a finalized CD or correct format disc Poor radio reception Increase the distance between the unit and your TV or VCR e Fully extend the FM antenna EN 15 EN EN 17 PHILIPS Specifications are subject to change without notice 2014 WOOX Innovations Limited All rights reserved Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used by WOOX Innovations Limited under license from Koninkli
6. at the power supply voltage corresponds to the voltage printed on the back or the underside of the unit e Risk of electric shock When you disconnect the AC power always pull the plug from the socket Never pull the cord Connect the AC power cord to the wall socket Tip To save energy turn the unit off after use Ed n N AC MAINS oD Option 2 Battery power Caution e Batteries contain chemical substances so they should be disposed of properly Note e Batteries are not supplied with the accessories 1 Open the battery compartment Insert 6 batteries type 1 5V R14 UM2 C CELL with correct polarity as indicated 3 Close the battery compartment Turn on Switch the source selector on the product to RADIO CD Switch to standby mode e The product switches to standby mode automatically when there is no audio detected for over 15 minutes e Press PHI to wake up the product from standby mode Turn off Switch the source selector on the main unit to OFF EN 4 Play Play a CD Note You cannot play CDs encoded with copyright protection technologies When an audio in cable is plugged CD playback stops and the unit switches to audio in mode automatically e Make sure that no external device is connected with the CD sound machine through AUDIO IN socket before you play a CD You can play commercially available
7. e the disconnect device shall remain readily operable Warning e Never remove the casing of this apparatus e Never place this apparatus on other electrical equipment Never look into the laser beam inside this apparatus Caution e Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation Notice CE This product complies with the radio interference requirements of the European Community Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user s authority to operate the equipment Disposal of your old product amp Your product is designed and manufactured with high quality materials and components which can be recycled and reused ps This symbol on a product means that the product is covered by European Directive 2012 19 EU Inform yourself about the local separate collection system for electrical and electronic products Follow local rules and never dispose of the product with normal household waste Correct disposal of old products helps prevent negative consequences for the environment and human health Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box paper pulp buffer and polyethylene bags protective f
8. istortion Frequency Response 125 16000 Hz 3dB S N Ratio gt 55 dBA 14 EN Tuner Tuning Range FM 87 5 108MHz DAB 174 928 239 200 MHz Sensitivity Mono 26dB S N Ratio lt 22 dBf Stereo 46dB S N Ratio lt 43 dBf Search Selectivity 50 KHz FM Total Harmonic Distortion lt 3 Signal to Noise Ratio gt 50 dBA General Power supply 220 240V AC Power 50 60 Hz DC 9V 6x 1 5V Battery type R14 UM2 C CELL Operation Power 10W Consumption Standby Power lt 0 5 W Consumption Dimensions Main Unit WxHxD 300x 134 x 240 mm Weight Main Unit 1 4 kg Maintenance Clean the cabinet e Use a soft cloth slightly moistened with a mild detergent solution Do not use a solution containing alcohol spirits ammonia or abrasives Clean discs When a disc becomes dirty clean it with a cleaning cloth Wipe the disc from the centre out e Do not use solvents such as benzene thinner commercially available cleaners or antistatic spray intended for analogue records Clean the disc lens e After prolonged use dirt or dust may accumulate at the disc lens lo ensure good play quality clean the disc lens with Philips CD lens cleaner or any commercially available cleaner Follow the instructions supplied with cleaner 9 Troubleshooting Warning e Never remove the casing of this device To keep the warranty valid never try to rep
9. jke Philips N V AZB500B_AZB500W_12_UM_V2 0
10. oam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment This apparatus includes these labels CLASS 1 LASER PRODUCT Class Il equipment symbol This symbol indicates that the apparatus has a double insulation system The making of unauthorized copies of copy protected material including computer programs files broadcasts and sound recordings may be an infringement of copyrights and constitute a criminal offence This equipment should not be used for such purposes Note The type plate is located on the bottom of the apparatus EN 2 Your CD Soundmachine Introduction With this CD Sound machine you can Listen to FM radio Listen to DAB radio e Enjoy audio from discs and other external audio devices e Program the play sequence of tracks The CD sound machine offers you Dynamic Bass Boost DBB to enrich sound What s in the box Check and identify the contents of the package e Main unit e Power cord Short User Manual Safety sheet Overview of the main unit O EDS O TA N zw a I_ 8 e i CS VOLUME i le il cS E EE Bei care call O D DBB e Turn dynamic bass boost on off MH MENU e St
11. op playing e Access FM DAB menu Qa v e Select a preset radio station 4 MODE DISPLAY e Select a play mode Display the RDS information e Display the DAB information 5 OPEN CLOSE Open or close the disc compartment PI OK e Start or pause play e Press to wake up the CD sound machine from standby mode Confirm a selection 0 44 gt gt e Skip to the previous or next track Search within a track e In radio mode tune to a FM DAB radio station PROG e Program the play sequence of tracks Display panel e Display current status FM antenna e Improve FM reception FM DAB Select FM DAB band Source selector Select a source VOLUME e Adjust volume AUDIO IN Connect an external audio device AC MAINS EN 3 Get started Caution e Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation Always follow the instructions in this chapter in sequence If you contact Philips you will be asked for the model and serial number of your apparatus The model number and serial number are on the bottom of your apparatus Write the numbers here Model No Serial No Connect power The unit can be powered by either AC power or batteries Option 1 AC power Warning e Risk of product damage Make sure th
12. ror rate e Bitrate codec Time Date Use DAB menus 1 In DAB mode press MENU to access the DAB menus 2 Press A Wto toggle through the menus FULL SCAN Scan for the DAB stations e MANUAL Tune to a station manually DRC Enable or disable DRC PRUNE Remove invalid stations SYSTEM Access system setting menu 3 Press OK to enter the menu Re scan for stations Full scan is used to perform a wide range search for DAB radio stations e Press OK to activate the automatic search L gt This product automatically stores radio stations with sufficient signal strength Tune to a station manually With this feature you can tune to a specific channel frequency manually In addition to antenna orientation for better radio reception the optimal reception can also be obtained with this feature 1 Press OK to access the station list 2 Press 44 PPI to select a station 3 Press OK to confirm the option DRC Dynamic Range Control DRC adds or removes a degree of compensation for the differences in the dynamic range between radio stations 1 Press OK access the sub menus 2 Press A V to select an option e DRC OFF No compensation applied e DRC LOW Medium compensation applied e DRC HIGH Maximum compensation applied 3 Press OK to confirm the selection Remove invalid stations This option lists active stations and removes any stations that are in the
13. t where they exit from the unit Only use attachments accessories specified by the manufacturer Unplug this unit during lightning storms or when unused for long periods of time e Recording is permissible insofar as copyright or other rights of third parties are not infringed upon e Refer all servicing to qualified service personnel Servicing is required when the unit has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the unit has been exposed to rain or moisture does not operate normally or has been dropped e Battery usage CAUTION To prevent battery leakage which may result in bodily injury property damage or damage to the unit e Install all batteries correctly and as marked on the unit Do not mix batteries old and new or carbon and alkaline etc Remove batteries when the unit is not used for a long time 2 EN e Batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like e CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type e The unit shall not be exposed to dripping or splashing Do not place any sources of danger on the unit e g liquid filled objects lighted candles e Where the MAINS plug or an appliance coupler is used as the disconnect devic
14. tically then the first stored radio station is broadcast gt FULL is displayed when 20 preset radio stations are stored Program FM radio stations manually Note e To overwrite a programmed radio station store another station in its place 1 Tune to a radio station 2 Press PROG to activate programming 3 Press 44 PP to allocate a number to this radio station and then press PROG to confirm L gt STORED and the frequency of this radio station are displayed 4 Repeat steps 1 3 to program more stations Select a preset radio station In tuner mode press W to select a preset station Adjust FM settings 1 In M mode press MENU to access FM menus 2 Press amp Wto toggle through the menus SCAN SET Access the scan settings SYSTEM Access system settings Scan setting 1 Press OK to access the SCAN SET menu ress to select an option 2 Press A Wto sel pti STRONG Search for strong stations only ALL Search for all stations no matter whether the signal strength of a station is strong or weak 3 Press OK to confirm the selection System menus 1 Press OK to access system menu 2 Press amp W to to select a sub menus e For details refer to the section Use system menus 6 Listen to DAB radio stations Listen to DAB radio stations Note e For optimal reception fully extend the antenna and adjust its position
15. uring play PROG program is displayed e To erase the program press M twice Adjust sound During play you can adjust volume and select the sound effects Key Function VOLUME Increase or decrease volume DBB Turn dynamic bass enhancement on or off Play from an external device You can also listen to an external audio device through this product 1 Switch the source selector to CD L gt AUX IN displays on the screen 2 Connect an audio cable 3 5mm not supplied to the AUDIO IN socket on the unit e the headphone socket on an external device 3 Play the external device see the device s user manual Note The AUDIO IN socket is not for headphones EN 5 Listen to FM radio stations Tune to FM radio stations Note For optimal reception fully extend and adjust the position of the FM antenna 1 Switch the source selector to RADIO and switch the band selector to FM 2 Press 44 PPI to tune to a radio station epeat ste o tune to more stations 3 Repeat step 3 to tune t stat e To store the current radio station press PROG twice AUDIO IN CD RADIO OFF A Program FM radio stations automatically Note You can program a maximum of 20 preset radio stations In FM tuner mode press and hold PROG for 2 seconds to activate automatic programming L gt All available radio stations are stored automa
Download Pdf Manuals
Related Search