Samsung BD-E5400
Contents
1. 20 This SAMSUNG brand product as supplied and distributed by SAMSUNG and delivered new in the original carton to the original consumer purchaser is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of One 1 Year Parts and Labor 90 Days Parts and Labor for Commercial Use This limited warranty begins on the original date of purchase and is valid only on products purchased and used in the United States To receive warranty service the purchaser must contact SAMSUNG for problem determination and service procedures Warranty service can only be performed by a SAMSUNG authorized service center The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG s authorized service center Transportation of the product to and from the service center is the responsibility of the purchaser SAMSUNG will repair or replace this product at our option and at no charge as stipulated herein with new or reconditioned parts or products if found to be defective during the limited warranty period specified above All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG Replacement parts and products assume the remaining original warranty or ninety 90 days whichever is longer SAMSUNG s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth2. of the batteries e Check if the batteries are drained e Check if the remote sensor is blocked by obstacles e Check if there is any fluorescent lighting nearby CAUTION Dispose of batteries according to local environmental regulations Do not put them in the household trash Connections A Connecting to a TV Connecting to a TV with an HDMI Cable 1 Using an HDMI cable connect the HDMI OUT terminal on the rear of the player to the HDMI IN terminal of your TV See page 8 2 Turn onthe player and TV 3 Press the input selector on your TV remote control until the HDMI signal from the player appears on your TV screen 4 If this is the first time you have turned on the Blu ray player the Initial Settings screen appears See page 8 amp NOTE An HDMI cable outputs digital video audio so you don t need to connect an audio cable f the player is connected to your TV in the HDMI 720p 1080i or 1080p output mode you must use a High speed category 2 HDMI cable HDMI outputs only a pure digital signal to the TV If your TV does not support HDCP High bandwidth Digital Content Protection random noise appears on the screen Depending on your TV certain HDMI output resolutions may not work Please refer to the user manual of your TV When you connect the player to the TV using the HDMI cable for the first time or to a new TV the HDMI output resolution will be automatically set to the highest suppor
3. press the RETURN button to exit the Network Setting screen amp NOTE To comply with the revised Wi Fi standard specifications WEP encryption of the wireless router does not support WPS connections 11 Network Test Use this menu item to check whether your network connection is working or not Network Status Use to check whether a connection to a network and the Internet have been established BD Live Internet Connection Set to allow or prohibit an Internet connection when you use the BD LIVE service e Allow All The Internet connection is allowed for all BD LIVE contents e Allow Valid Only The Internet connection is allowed only for BD LIVE contents containing a valid certificate e Prohibit No Internet connection is allowed for any BD LIVE content amp NOTE What is a valid certificate When the player uses BD LIVE to send the disc data and a request to the server to certify the disc the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player The Internet connection may be restricted while you are using BD LIVE contents Using the BD LIVE Once the player is connected to the network you can enjoy various movie related service contents using a BD LIVE compliant disc 1 Attach a USB memory stick to the USB jack on the back of the player and then check its remaining memory The memory device must have at least 1GB of free sp
4. some discs bearing the BD ROM BD RE R DVD VIDEO DVD RW R DVD RW R and CD RW R logos may still be non standardized discs some discs may not be played depending on their physical state or recording conditions problems and errors can occur during the creation of Blu ray Disc or DVD software and or the manufacture of discs this player operates differently than a standard DVD player or other AV equipment and or for reasons noted throughout this user manual and for other reason s discovered and posted by SAMSUNG customer care center e f you encounter disc compatibility or player operation problems please contact SAMSUNG customer care center You may also contact SAMSUNG customer care center for possible updates on this player e For additional information on playback restrictions and disc compatibility refer to the Precautions Before Reading the user manual Disc Types and Characteristics and Before Playing sections of this user manual e For Blu ray Disc Player progressive scan output CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE IN CASE OF PROGRESSIVE SCAN PICTURE PROBLEMS IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product PLEASE CONTACT OUR CUSTOMER SERVICE CENTER Copy Protection e
5. uninterrupted or error free operation of the product THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS OR ANY OTHER SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE MISUSE OR INABILITY TO USE THIS PRODUCT REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE WITHOUT LIMITING THE FOREGOING PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS DAMAGE OR INJURY TO PURCHASER AND PURCHASER S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY
6. 21 CFR CAUTION e CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO THE BEAM IEC 60825 1 e THIS product UTILIZES A LASER USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL CLASS 1 KLASSE 1 LUOKAN 1 LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT L SER CLASE 1 KLASS 1 PRODUCTO NOTE fthe Region number of a Blu ray Disc DVDs does not correspond to the Region number of this player the player cannot play the disc Precautions Important Safety Instructions Read these operating instructions carefully before using the unit Follow all the safety instructions listed below Keep these operating instructions handy for future reference Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth ee eS S SY E Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including AV receivers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the oth
7. CD automatically Controlling Video Playback You can control the playback of video content located on a DVD CD or USB storage device Depending on the disc some of the functions described in this manual may not be available Buttons on the Remote Control used for Video Playback Playback related buttons The player does not play sound in Search Slow or Step mode e To return to normal speed playback press the 8 button C3 button button ED button Fast Motion Play Slow Motion Play Step Motion Play Skip Motion Play Starts playback Stops playback Pauses playback During playback press the QJ or ES button Each time you press the B or 3 button the playback speed will change In pause mode press the Ey button Each time you press the 9 button the playback speed will change In pause mode press the J button Each time you press the Jj button a new frame appears During playback press the or 3 button Each time you press or 9 button the disc moves to the previous or next chapter or file Using the disc menu title menu popup menu and title list DISC MENU button TITLE MENU button POPUP MENU button During playback press this button to start the disc menu function During playback press this button to start the title menu function During playback press this button to start the popup menu function You can control the playback of m
8. When you play a BD J title loading may take longer than a normal title or some functions may perform slowly Disc types your player cannot play e HD DVD e DVD RAM e DVD RW VR mode 3 9 GB DVD R for e DVD ROM PD e Super Audio CD e CVD CD ROM Authoring MV etc except CD layer CDV CD G CD I LD CD Gs play audio only not graphics 4 Region Code Both players and discs are coded by region These regional codes must match for a disc to play If the codes do not match the disc will not play The Region Code for this player is displayed on the rear panel of the player Disc Type Area North America Central Blu ray America South America Disc Korea Japan Taiwan Hong Kong and South East Asia DVD The U S U S territories and VIDEO Canada Logos of Discs the player can play gt GL VE Blu ray Disc BD LIVE NTSC broadcast system in U S A Canada Korea Japan Supported File Formats Notes on the USB connection e Your player supports USB storage media MP3 players digital cameras and USB card readers e The player does not support folder or file names longer than 128 characters Some USB External HDD digital camera devices may not be compatible with the player Your player supports the FAT16 FAT32 and NTFS file systems Connect USB devices directly to the player s USB port Connecting through a USB cable may cause compatibility problems Inserting more than one memory device into a multi ca
9. and videos and their soundtracks When a prohibitet use of an unauthorized copy is detected a message will be displayed and playback or copying will be interrupted More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http www cinavia com To request additional information about Cinavia by email send a postcard with your mailing address to Cinavia Consumer Information Center PO Box 86851 San Diego CA 92138 USA This product incorporates proprietary technology under licence from Verance Corporation and is protected by U S Patent 7 369 677 and other U S and worldwide patens issued and pending as well as copyright and trade secret protection for certain aspects of such technology Cinavia is a trademark of Verance Corporation Copyright 2004 2010 Verance Corporation All right reserved by Verance Reverse engineering or disassembly is prohibited Network Service Disclaimer All content and services accessible through this device belong to third parties and are protected by copyright patent trademark and or other intellectual property laws Such content and services are provided solely for your personal noncommercial use You may not use any content or services in a manner that has not been authorized by the content owner or service provider Without limiting the foregoing unless expressly authorized by the applicable content owner or service provider you may not modify copy republish
10. flash drive You can check the device s information including the storage size delete the BD data or change the Flash memory device amp NOTE n the external memory mode disc playback may be stopped if you disconnect the USB device in the middle of playback Your player supports the FAT16 FAT32 and NTFS file systems We recommend you use USB devices that support USB 2 0 protocol with 4 MB sec or faster read write speed The Resume Play function may not work after you format the storage device The total memory available to BD Data Management may differ depending on the conditions Language Settings You can select the language you prefer for the Home menu disc menu etc 9 NOTE The selected language will only appear if it is supported on the disc Security Settings When you access this function for the first time the PIN screen appears Enter the default PIN 0000 using the number buttons To change the PIN use the Change PIN function page 13 Each time you access the Security Settings hereafter you must enter that four digit PIN If you don t change the PIN continue using the default PIN BD Parental Rating Prevent playback of Blu ray Discs with specific age ratings unless the 4 digit PIN is entered DVD Parental Rating This function works in conjunction with DVDs that have been assigned an age rating or numeric rating that indicates the maturity level of the content These
11. in the applicable end user license agreement Non SAMSUNG hardware and software products if provided are on an AS IS basis Non SAMSUNG manufacturers suppliers publishers and service providers may provide their own warranties This limited warranty covers manufacturing defects in materials and workmanship encountered in normal and except to the extent otherwise expressly provided for in this statement noncommercial use of this product and shall not apply to the following including but not limited to damage which occurs in shipment delivery and installation applications and uses for which this product was not intended altered product or serial numbers cosmetic damage or exterior finish accidents abuse neglect fire water lightning or other acts of nature use of products equipment systems utilities services parts supplies accessories applications installations repairs external wiring or connectors not supplied and authorized by SAMSUNG or which damage this product or result in service problems incorrect electrical line voltage fluctuations and surges customer adjustments and failure to follow operating instructions cleaning maintenance and environmental instructions that are covered and prescribed in the instruction book product removal or reinstallation reception problems and distortion related to noise echo interference or other signal transmission and delivery problems SAMSUNG does not warrant
12. upgrades when it is connected to a network We recommend using a Broadband modem with integrated router or an IP router for the connection For more information on router connections refer to the user manual of the router or contact the router manufacturer for technical assistance Wireless Network 1 You can connect this unit to a network via a wireless connection See page 8 2 Set the network options See pages 10 12 amp NOTE f your wireless router supports DHCP this player can use a DHCP or static IP address to connect to the wireless network Set your wireless router to Infrastructure mode Adhoc mode is not supported The player supports only the following wireless security key protocols WEP OPEN SHARED WPA PSK TKIP AES WPA2 PSK TKIP AES Select a channel on the wireless router that is not currently being used If the channel set for the wireless router is currently being used by another device nearby it will result in interference and communication failure f you select the Pure High throughput Greenfield 802 11n mode and set the Encryption type on your router to WEP TKIP or TKIP AES WPS2Mixed the player will not support a connection in compliance with new Wi Fi certification specifications Wireless LAN by its nature may cause interference depending on the operating conditions router performance distance obstacles interference by other radio devices etc A Connecting to a TV
13. upload post transmit translate sell create derivative works exploit or distribute in any manner or medium any content or services displayed through this device THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS SAMSUNG DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED EITHER EXPRESSLY OR IMPLIEDLY FOR ANY PURPOSE SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SAMSUNG DOES NOT GUARANTEE THE ACCURACY VALIDITY TIMELINESS LEGALITY OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL SAMSUNG BE LIABLE WHETHER IN CONTRACT OR TORT FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION CONTAINED IN OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Third party services may be terminated or interrupted at any time and Samsung makes no representation or warranty that any content or service will remain available for any period of time Content and services are transmitted by third parties by means of networks and transmission facilities over which Samsung has no control Without limiting the generality of this disclaimer Samsung expressly disclaims any responsib
14. 0 Subnet Mask 255 25 25 0 Gateway SE 0 0 0 DNS al DNS Server l 0 1 0 0 jo nual E WPS PBC Move Select Return Press the Y button to go to the first entry field IP Address Use the number buttons to enter numbers When done with each field use the gt button to move successively to the next field You can also use the other arrow buttons to move up down and back 6 Enter the IP Address Subnet Mask and Gateway values 7 Press the to go to DNS 8 Press the Y button to go to the first DNS entry field Enter the numbers as above 9 When done press the A button to return to Access Point Selection Select the network and then press the fE button WPS PBC function The easiest way to set up the wireless network connection is using the WPS PBC function If your wireless router has a WPS PBC button follow these steps 1 In the Network Settings menu press the AY buttons to select Network Setting and then press the EJ button The Internet Protocol Setup screen appears 2 Press the RED A button on the remote control 3 Press the WPS PBC button on your router within two minutes Your player displays the Network Selection Screen and automatically acquires all the network setting values it needs and connects to your network When it is done it displays an OK button Press the EJ button on your remote 4 After the network connection is set up
15. 0p 480p 480p 9 NOTE f the TV you connected to the player does not support Movie Frame or the resolution you selected the message If no pictures are shown after selecting Yes please wait for 15 seconds to return to the previous resolution Do you want to change the resolution appears If you select Yes the TV s screen will go blank for 15 seconds and then the resolution will revert to the previous resolution automatically f the screen stays blank after you have changed the resolution remove all discs and then press and hold the mi button on the front of the player for more than 5 seconds All settings are restored to the factory default Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support When the factory default settings are restored all stored user BD data is deleted The Blu ray Disc must have the 24 frame feature for the player to use the Movie Frame 24Fs mode Movie Frame 24Fs Setting the Movie Frame 24Fs feature to Auto allows you to adjust the player s HDMI output to 24 frames per second for improved picture quality You can enjoy the Movie Frame 24Fs feature only on a TV supporting this frame rate You can select Movie Frame only when the player is in the HDMI 1080i or 1080p output resolution modes HDMI Color Format Lets you set the color space format for HDMI output to match the capabilities of the connected de
16. BD E5400 Slu ray Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register ENGLISH safety Information TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER OR BACK NO USER SERVICEABLE PARTS ARE INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within the CAUTION TO REDUCE THE RISK OF The explanation point within the triangle triangle is a warning sign alerting you of ELECTRIC SHOCK DO NOT REMOVE is a warning sign alerting you of important dangerous voltage inside the product COVER OR BACK NO USER SERVICEABLE instructions accompanying the product PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect this equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This class B digital product meets all requirements of the Canadian Interference Causing Equipment Regulations e To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture FCC NOTE for U S A This eq
17. Because AACS Advanced Access Content System is approved as the content protection system for the Blu ray Disc format similar to use of CSS Content Scramble System for the DVD format certain restrictions are imposed on playback analog signal output etc of AACS protected contents The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and or changed by AACS after the production of this product Furthermore BD ROM Mark and BD are additionally used as content protection systems for the Blu ray Disc format which imposes certain restrictions including playback restrictions for BD ROM Mark and or BD protected contents To obtain additional information on AACS BD ROM Mark BD or this product please contact SAMSUNG customer care center e Many Blu ray Disc DVDs are encoded with copy protection Because of this you should only connect your Player directly to your TV not to a VCR Connecting to a VCR results in a distorted picture from copy protected Blu ray Disc DVDs e Under the U S Copyright laws and Copyright laws of other countries unauthorized recording use display distribution or revision of television programs videotapes Blu ray Discs DVDs and other materials may subject you to civil and or criminal liability e Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially produced film
18. D Master Audio DTS re encoded PCM 2ch Dolby Digital PCM 2ch DTS If the Source Stream is 2ch Re encoded Dolby D Setting is not applied Output will be PCM 2ch Blu ray Discs may include three audio streams Main Feature Audio The audio soundtrack of the main feature BONUSVIEW audio An additional soundtrack such as the director or actor s commentary Navigation Sound Effects When you choose a menu navigation selection a Navigation Sound Effect may sound Navigation Sound Effects are different on each Blu ray Disc amp NOTE Be sure to select the correct Digital Output or you will hear no sound or just loud noise f the HDMI device AV receiver TV is not compatible with compressed formats Dolby Digital DTS the audio signal outputs as PCM Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects Some Blu ray Discs do not have BONUSVIEW audio and Navigation Sound Effects f you play MPEG audio soundtracks the audio signal outputs as PCM regardless of your Digital Output selections PCM or Bitstream PCM Downsampling Lets you set 48kHz and 96kHz PCM down sampling on or off HDMI e If your TV is not compatible with compressed multi channel formats Dolby Digital DTS the player may output PCM 2ch downmixed audio even though you selected Bitstream either Re encoded or Unprocessed in the setup menu e f your TV is not compatible with PCM sam
19. Deviee auuaannannn 14 Controlling Video Playback n s 15 Controlling Music Playback cccccceeceee 15 Playing Photo Contents 16 APPENDIX TROUDISSOOTING ee 16 Specifications nie 18 Getting Started Disc Types and Contents your player can play Media Disc Type Details Blu ray Disc BD ROM or BD RE R recorded in the BD RE format DVD VIDEO VIDEO DVD RW DVD VIDEO recorded DVD RW DVD RW V DVD R R that have DVD R been recorded and finalized or a USB storage media containing MKV DVD RW or MP4 contents DVD R es Music recorded on CD RW R DVD RW R BD RE R or a USB MUSIC ONE storage media containing MP3 or WMA contents BD RE R 9 9 aa Photos recorded on CD RW R DVD RW R BD RE R or a USB PRUD DMO h storage media containing JPEG contents BD RE R 9 9 amp NOTE The player may not play certain CD RW R and DVD R because of the disc type or recording conditions f a DVD RW R has not been recorded properly in DVD video format it will not be playable Your player will not play content that has been recorded on a DVD R at a bit rate that exceeds 10 Mbps Your player will not play content that has been recorded on a BD R or USB device at a bitrate that exceeds 25 Mbps Playback may not work for some types of discs or when you use specific functions such as angle change and aspect ratio adjustment Information about the discs is written in detail on the disc box Please refer to this if necessary
20. Samsung TVs only BD Wise is Samsung s latest inter connectivity feature When you connect a Samsung player and a Samsung TV with BD Wise to each other via HDMI and BD Wise is on in both the player and TV the player outputs video at the video resolution and frame rate of the Blu ray Disc DVDs 9 NOTE When BD Wise is on the Resolution setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu f the player is connected to a device that does not support BD Wise you can not use the BD Wise function For proper operation of BD Wise set the BD Wise menu of both the player and the TV to On Resolution Lets you set the output resolution of the HDMI video signal to Auto 1080p 1080i 720p or 480p The number indicates the number of lines of video per frame The i and p indicate interlaced and progressive scan respectively The more lines the higher the quality Resolution according to the output mode e Blu ray Disc E contents Digital Contents playback HDMI connected HDMI Mode E contents t ar Blu ray Disc Digital contents Resolution of a Blu ray Disc 1080p Auto Max Resolution Max Resolution of TV input of TV input 1080p 60F Movie Frame Off 1080 60F 1080 60F Movie Frame Auto 24Fs 1080p 2Ar 1080i 1080i 720p 720p 480p 480p e DVD playback Setup ae HDMI connected HDMI Mode BD Wise 480i Auto Max Resolution of TV input 1080p 1080p 1080i 1080i 720p 72
21. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state To obtain warranty service please contact SAMSUNG customer care center QUESTIONS OR COMMENTS COUNTRY CALL OR VISIT US ONLINE AT WRITE Samsung Electronics America Inc IN THE US EBORE al www samsung com 85 Challenger Road Ridgefield Park 726 7864 NJ 07660 2112 ENERGY STAR AK68 02273A 01
22. TRACK 0 J o en S AKo lt 2 0238 0238 sy mxo TRACK O01 lt lt 02 38 JA 0238 my mxo TRACK 001 lt lt 02 38 0288 cp Select Jump Page Return Press the A V lt gt buttons to move to a desired track and then press the YELLOW C button A check appears on the track Repeat this procedure to select additional tracks To remove a track from the list move to the track and then press the YELLOW C button again The check on the track is cancelled When done press the amp button To go to the Music List press the RETURN button 9 NOTE You can create a playlist with up to 99 tracks on Audio CDs CD DA 16 Appendix You can play photo contents located on a DVD CD or a USB storage device Using the Tools Menu During playback press the TOOLS button Slide Show Select to start the slide show Background Select to listen to music while Music viewing a slide show Zoom Select to enlarge the current picture Enlarge up to 4 times Select to rotate the picture This Rotate will rotate the picture either clockwise or counter clockwise Information Shows the picture information amp NOTE Depending on the disc or storage device the Tools menu may differ To enable the background music function the photo file must be in the same storage media as the music file However the sound quality can be affected by the bit rate of the MP3 fi
23. TV Pirie gt menr f HDMI cable not included B Connecting to an Audio System HDMI cable a not included HDMI cable not included C Network Wireless Router L gt Broadband service amp NOTE You can only connect this unit to a network via a wireless connection 8 settings e The Home screen will not appear if you do not configure the initial settings e The OSD On Screen Display may change in this player after you upgrade the software version e The access steps may differ depending on the menu you selected e After the loading process of this product is finished the panel buttons and remote control can be operated The Initial Settings Procedure lets you set the OSD and menu languages configure the connection to your home network and choose the aspect ratio output Screen size and format that is correct for your TV NOTE The Home menu will not appear if you do not configure the initial settings except as noted below f you press the BLUE D button during network setup you can access the Home menu even if the network setup is not completed yet When you return to the Home menu the full screen mode is cancelled automatically f you want to display the Initial Setting screen again to make changes press the mi button on the front panel of the player for more than 5 seconds with no disc inserted This resets the player to its defau
24. ace to accommodate the BD LIVE services 12 2 Insert a Blu ray Disc that supports BD LIVE 3 Select an item from various BD LIVE service contents provided by the disc manufacturer amp NOTE The way you use BD LIVE and the provided contents may differ depending on the disc manufacturer Using the AllShare Function AllShare lets you play music video and photo files located in your PC or NAS on the player To use AllShare with your player you must connect the player to your network See pages 10 12 To use AllShare with your PC you must install AllShare software on your PC If you have NAS you can use AllShare without any additional software To download AllShare software Go to Samsung com 2 Click Support enter your player s product number in the field that appears and then click Product 3 On the next screen click Get downloads under Downloads Click Software on the next page 5 Click the icon in the AllShare line under File to start the download Playing content located in your PC on the Blu ray Disc Player You can view shared files from your computer on your Blu ray Disc Player You can get detailed instructions for using AllShare from the Samsung com web site Blu ray Disc Player Play back PC s files AllShare Connection System Settings Initial Settings By using the Initial Settings function you can set the language Network Settings etc For more inf
25. all the user stored BD data will be deleted General Settings Time Zone You can specify the time zone that is applicable to your area Support Settings Software Upgrade The Software Upgrade menu allows you to upgrade the player s software for performance improvements or additional services By Online To upgrade By Online follow these steps 1 Select By Online and then press the button The Connecting to Server message appears 2 A popup message will appear if an update is available 3 Ifyou select Yes the player will turn off automatically before restarting Never turn the player on during an upgrade 4 The update progress popup will appear When the update is completed the player will turn off automatically 5 Press the POWER button to turn on the player amp NOTE The Update is complete when the player turns off after restarting Press the POWER button to turn on the updated player for your use Never turn the player off or back on manually during the update process Samsung Electronics takes no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade f you want to cancel the upgrade while the upgrade software is downloading press the button By USB To upgrade by USB follow these steps 1 Visit www samsung com bluraysupport Download the latest USB software upgrade zip archive to your compu
26. ble e Subject to the restrictions described below and those noted throughout this Manual including the Disc Type and Characteristics section of this user manual disc types that can be played are pre recorded commercial BD ROM DVD VIDEO and Audio CD CD DA discs BD RE R DVD RW R discs and CD RW R discs e Discs other than those listed above cannot be and are not intended to be played by this player Some of the discs listed above may not play due to one or more reasons provided below e Samsung cannot assure that this player will play every disc bearing the BD ROM BD RE R DVD VIDEO DVD RW R DVD RW R and CD RW R logos and this player may not respond to all operating commands or operate all features of every disc These and other disc compatibility and player operation issues with new and existing format discs are possible because Blu ray is anew and evolving format and this player may not operate all features of Blu ray Discs because some features may be optional additional features may have been added to the Blu ray Disc format after the production of this player and certain available features may be subject to delayed availability not all new and existing disc format versions are supported by this player new and existing disc formats may be revised changed updated improved and or supplemented some discs are produced in a manner that allows specific or limited operation or restricts features during playback
27. ct the nearest customer service center for technical assistance Do not use the product Using the product as it is may cause a fire or an electric shock Copyright 2012 Samsung Electronics Co Ltd All rights reserved No part or whole of this user s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co Ltd Contents SAFETY INFORMATION Warning ereneaaesnanetinetaincaigs RER NV NERESEERTUNEHEENEERNN 2 FOC ICING anne 2 Disc Storage amp Management 3 Handling Cautions nen 3 Copyright ssssssssnisssseesrnrrisrnsrnnrrrrrnrenrrrrrrnene 3 GETTING STARTED Before using the User Manual 4 Logos of Discs the player can play 4 PCCESSONES einer 5 PPC IRIE te aereis deae aeaaea aea 6 Rear PAIN 6 Remote Control ee 6 CONNECTIONS A Connecting to a TV na 7 B Connecting to an Audio System 7 C Connecting to a Network seses 7 SETTINGS The Initial Settings Procedure 8 Menu Navigation 8 Accessing the Settings Menu 9 Display SOUUINGS cesususesuinuincnts siitndds Geaiwndnaaiatickawiens 9 Audio SEND 10 Network Settings cccsccssccsssessssseeeseen 10 System Settings iadistarsde namie bnwennesiandantnnteasexa 12 Language SSUINOS cai uni 13 Security SEUINGSiaciceinistieanscmrcradninceevoens 13 General Settings 13 Support Settings nun en 13 MEDIA PLAY WSOP a ISG ee 14 Insert a USB
28. dio Codec MP3 Dolby Digital MP4v3 avi ea 264 ea VC 1 AP mkv MKV H 264 BP MP HP wmv WMV wmv9 a LER OO VAM mp4 MP4 mp4v H 264BP MP HP 264 H 264BP MP HP MPEG un ee mpeg H 264 H 264BP MP HP e Limitations Even when a the file is encoded by a supported codec mentioned above the file might not be played if its content has a problem Normal playback is not guaranteed if the file s container information is wrong or the file itself is corrupted Files having higher Bit rate frame rate than standard may stutter during sound video playback The Seek skip function is not available if the file s index table is damaged e Video decoder Supports up to H 264 Level 4 1 and AVCHD DIS WMA PCM Dolby Digital DTS MP1 2 Dolby Digital DTS Does not support H 264 FMO ASO RS and VC1 SP MP AP L4 MPEG4 SP ASP Below 1280 x 720 60 frames max Above 1280 x 720 30 frames max Does not support GMC 2 or higher Resolution 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 e Audio decoder Supports WMA 7 8 9 and STD Does not support WMA sampling rate of 22050Hz mono Music File Support File Extension Audio Codec Support Range mp3 2 Sampling rates in KHz 8 11 16 22 32 44 1 48 wma Bit rates All bit rates from 5kbps to 384kbps AVCHD Advanced Video C
29. e 2 The update progress popup appears 3 When the update is complete the player turns off again automatically 4 Press the POWER button to turn on the player 14 amp NOTE The update is complete when the player turns off after restarting Press the POWER button to turn on the updated player for your use Never turn the player off or on manually during the update process Samsung Electronics takes no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during software upgrade Contact Samsung Provides contact information for assistance with your player Terms of Service Agreement View the general disclaimer regarding third party contents and services Reset All settings will revert to the factory default except for the network settings Media Play 1 N 9 gt Press the button to open the disc tray Push a disc gently into the disc tray with the disc s label facing up Press the button to close the disc tray Playback starts automatically If playback does not start automatically select the Videos option on the Main screen and then press the amp button Insert a USB Device You can play multimedia files located on a USB storage device 1 2 o gt Move to the Home menu In Stop mode connect the USB storage device to the USB port on the back panel of the player The message Do you want
30. e you have selected the correct Digital Output in the Audio Options Menu If the HDMI output is set to a resolution your TV cannot support for example 1080p you may not see a picture on your TV Press the ll button on front panel for more than 5 seconds with no disc inside All settings will revert to the factory settings When the factory default settings are restored all stored user BD data is deleted PROBLEM Forgot password If you experience other problems The picture is noisy or distorted No HDMI output Abnormal HDMI output screen AllShare function can see folders shared through AllShare but cannot see the files Video is played intermittently AllShare connection between Player and PC is unstable SOLUTION Press the W button on front panel for more than 5 seconds with no disc inside All settings including the password will revert to the factory settings Don t use this unless absolutely necessary When the factory default settings are restored all stored user BD data is deleted Go to the contents and find the section of the user manual that contains the explanations regarding the current problem and follow the procedure once again If the problem still cannot be solved please contact your nearest Samsung authorized service center Make sure that the disc is not dirty or scratched Clean the disc Check the connection between the TV and the HDMI jack of the player Check
31. er A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where it exits the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over A 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as when the power supply cord or plug is damaged liquid has been spilled or objects have fallen into exposed to rain or moisture does not operate normally or has been dropped Disc Storage amp Management Fingerprints or scratches on a disc may reduce sound and picture quality Avoid touching the surface of a disc where data has been recorded Hold the disc by the edges so that Do not stick paper or tape on the disc e Cleaning Discs If you get fingerprints or dirt detergent diluted in water and wi
32. er button once e To delete the last letter number or symbol you entered move to the Delete button and then press the button e To see and use additional symbols press the I or gt gt I button when the Security Key screen is displaying symbols e To clear all entered letters numbers and symbols move to the Clear All button and then press the button You can also just press the RED A button on your remote When done press the YELLOW C button on your remote or move to the Done button and then press the button The Network Connecting screen appears 10 11 Wait until the connection confirmation message is displayed and then press the EJ button The Network Settings screen reappears To test the connection press the Y button to select Network Test and then press the button Manual Network Setup If the Auto Setting does not work you need to enter the Network settng values manually Before you start manual network setup you need the network setting values To get the Network setting values contact your ISP or your network administrator To Enter the Network settings into your player follow these steps 1 2 On the Internet Protocol Setup screen press the amp J button Press the A V buttons to select Manual and then press the J button 6 Settings Network Setting i Access Point Selection Not Selected q Internet Protocol Setup Manual IP Address 0_ 0 0
33. if your TV supports 480p 720p 1080i or 1080p HDMI input resolutions If random noise appears on the screen it means that TV does not support HDCP High bandwidth Digital Content Protection AllShares shows only files corresponding to the Image Music and Movie categories Files that do not correspond to these categories are not displayed Check if the network is stable Check if the network cable is properly connected and if the network is not overloaded The IP address under the same subnetwork should be unique If they are not IP interference can cause this phenomenon Check if you have a firewall enabled If so disable the firewall function PROBLEM SOLUTION BD LIVE cannot connect to the BD LIVE server Check whether the network connection is working or not by using the Network Status menu e Check whether the USB memory device is connected to the player e The memory device must have at least 1GB of free space to accommodate the BD LIVE service You can check the available size in BD Data Management e Check whether the BD LIVE Internet Connection menu is set to Allow All e ifall above fails contact the contents provider or update the player to the latest firmware When using the BD LIVE service an error occurs The memory device must have at least 1GB of free space to accommodate the BD LIVE service You can check the available size in BD Data Management amp NOTE When the fact
34. ility or liability for any interruption or suspension of any content or service made available through this device Samsung is neither responsible nor liable for customer service related to the content and services Any question or request for service relating to the content or services should be made directly to the respective content and service providers 19 License Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Q DOLBY TRUEIL DIGITAL PLUS Manufactured under license under U S Patent Nos 5 956 674 5 974 380 GS dts 6 487 535 amp other U S and worldwide patents issued amp pending DTS the 2 0 Digital Out Symbol amp DTS and the Symbol together are registered trademarks amp DTS 2 0 Digital Out is a trademark of DTS Inc Product includes software DTS Inc All Rights Reserved The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Homi Oracle and Java are registered trademarks of Oracle and or its affiliates Other names may be trademarks of their respective owners _ Java POWERED Open Source License Notice Inthe case of using open source software Open Source Licenses are available on the product menu Blu ray Disc Blu ray and the logos are trademarks of the Blu ray Disc Association
35. ire a working Internet connection Accessing the Settings Menu To access the Settings menu and sub menus follow these steps 1 Press the POWER button The Home Menu appears 2 Press the lt P buttons to select Settings and then press the button 3 Press the A Y buttons to select the desired submenu and then press the button 4 Press the A Y buttons to select the desired item and then press the fE button 5 Press the EXIT button to exit the menu amp NOTE The access steps may differ depending on the menu you selected The OSD On Screen Display may change in this player after you upgrade the software version Display Settings You can configure various display options such as the TV Aspect Ratio Resolution etc TV Aspect Ratio Depending on the type of television you have you may want to adjust the screen size setting 9 NOTE Depending on the disc type some aspect ratios may not be available f you select an aspect ratio and option which is different than the aspect ratio of your TV screen the picture might appear to be distorted f you select the 4 3 Pan Scan or 4 3 Letter Box pressing the FULL SCREEN button on the remote will not bring up a full screen picture f you select the 16 9 Original your TV may display 4 3 Pillarbox black bars on sides of picture If this occurs pressing the FULL SCREEN button on the remote will not bring up a full screen picture BD Wise
36. le the size of the photo and the encoding method You can t enlarge the subtitle and PG graphic in the full screen mode PROBLEM No operation can be performed with the remote control Disc does not play Disc Menu does not appear The prohibition message appears on the screen Play mode differs from the Setup Menu selection The screen ratio cannot be changed No audio The screen is blank Troubleshooting Before requesting service please try the following solutions SOLUTION Check the batteries in the remote control They may need replacing Operate the remote control at a distance of no more than 20 feet Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it Reinstall batteries and try to operate the remote control again Ensure that the disc is installed with the label side facing up Check the region number of the Blu ray Disc DVD Ensure that the disc has disc menus This message appears when an invalid button is pressed The Blu ray Disc DVD s software doesn t support the feature e g angles You ve requested a title or chapter number or search time that is out of range Some of the functions selected in the Setup Menu may not work properly if the disc is not encoded with the corresponding function The Screen Ratio is fixed on your Blu ray Disc DVD This is not a problem with the player Make sur
37. lection and then press the EJ button The Network function searches for available wireless networks When done it displays a list of the available networks In the list of networks press the AV buttons to select a network and then press the EJ button If the Security Key screen appears go to Step 7 If the Network Connecting Screen appears go to Step 10 On the Security Key screen enter your network s Pass Phrase amp NOTE You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem 46 Settings Security Key 0 abc 1 1 2 abo 3 def 4 ghi 5 jkl 6 mo Cursor Select Return m To enter the Pass Phrase follow these general directions e Use the arrow keys on your remote to move from button to button on the Security Key screen e To change the kind of characters you are entering move to the button labeled a A 1 and then press the button Each time you press the button you change the kind of characters you can enter a A 1 e You can also change the kind of character by pressing the DISC MENU button on the remote e To enter a letter press the number button that corresponds to the letter Pressing the button repeatedly changes the letter e To enter a number or symbol when the Security Key screen is displaying numbers or symbols press the corresponding numb
38. lt settings After the loading process of this product is finished you can operate the HDMI CEC function f you want to use an Anynet HDMI CEC function please follow the instructions below 1 Connect the player to an Anynet HDMI CEC compliant Samsung TV using HDMI Cable 2 Set the Anynet HDMI CEC feature to On in both the TV and the player 3 Set the TV to the Initial Settings Procedure f you leave the player in the stop mode for more than 5 minutes without using it a screen saver will appear on your TV If the player is left in the screen saver mode for more than 25 minutes the power will automatically turn off Menu Navigation HOME Button Press to move to the Home menu RETURN Button Return to the previous menu Enter DIRECTION Button Move the cursor or select an item Activate the currently selected item Confirm a setting EXIT Button Press to exit the current menu Selects Videos Selects Netflix Selects VUDU HD Movies Selects CinemaNow Selects Pandora Internet Radio Selects YouTube Selects Photos Selects Music Selects Settings 809080660 06 Displays the buttons you can use on the remote to access functions NOTE The Videos Photos and Music options require that you have an appropriate disc inserted into the player or a USB flash device attached to the player The Netflix VUDU Cinema Now Pandora and YouTube options requ
39. numbers help you control the types of DVDs that your family can watch Select the rating level you want to set For example if you select Level 6 discs rated above 6 Level 7 and 8 will not play A larger number indicates more mature content CinemaNow Lock Restrict the use of the CinemaNow service unless the 4 digit PIN is entered Netflix Lock Restrict the use of the Netflix service unless the 4 digit PIN is entered VUDU Lock Restrict the use of the VUDU service unless the 4 digit PIN is entered Pandora Lock Restrict the use of the Pandora service unless the 4 digit PIN is entered YouTube Lock Restrict the use of the YouTube service unless the 4 digit PIN is entered Change PIN Change the 4 digit password used to access security functions To change the PIN follow these steps Select Change PIN and then press the button The Enter old PIN screen appears 2 Enter the old PIN If you never changed the PIN enter the default PIN OOOO The Enter new PIN screen appears 3 Enter the new PIN in the Enter new PIN fields 4 Re enter the new PIN in the Confirm new PIN fields The PIN is changed successfully message appears Press the E button If you forgot your password 1 Remove any discs 2 Press and hold the MI button on the front panel for 5 seconds or more All settings will revert to the factory settings NOTE When the factory default settings are restored
40. odec High Definition e This player can play back AVCHD format discs These discs are normally recorded and used in camcorders e The AVCHD format is a high definition digital video camera format e The MPEG 4 AVC H 264 format compresses images with greater efficiency than the conventional image compressing format e Some AVCHD discs use the x v Color format This player can play back AVCHD discs that use x v Color format e x v Color is a trademark of Sony Corporation e AVCHD and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co Ltd and Sony Corporation amp NOTE Some AVCHD format discs may not play depending on the recording condition AVCHD format discs need to be finalized y v Color offers a wider color range than normal DVD camcorder discs Some MKV and MP4 format discs may not play depending on the video resolution and frame rate condition Accessories Check for the supplied accessories shown below Remote Control AK59 00146A User Manual AK68 02273A Batteries for Remote Control AAA Size BN43 00004A Front Panel PLAY PAUSE BUTTON STOP BUTTON 7 OPEN CLOSE BUTTON POWER BUTTON REMOTE CONTROL SENSOR DISC TRAY amp NOTE When the player displays the Blu ray Disc menu you cannot start the movie by pressing the Play button on the player or the remote To play the movie you must select Play Movie or Start in
41. ormation about the Initial Settings function refer to the Initial Settings section of this user manual page 8 Anynet HDMI CEC Anynet is a convenient function that offers linked operations with other Samsung players that have the Anynet feature To operate this function connect this player to an Anynet Samsung TV with an HDMI cable With Anynet on you can operate this player using a Samsung TV remote control and start disc playback simply by pressing the PLAY C gt button on the TV s remote control For more information please see the TV user manual NOTE This function is not available if the HDMI cable does not support CEC f your Samsung TV has an Anynet logo then it supports the Anynet function Depending on your TV certain HDMI output resolutions may not work Please refer to the user manual of your TV After the product was turned off disconnecting and connecting the power cable turns it on automatically At the moment it automatically turns off in about 15 seconds for re establishing Anynet connection For some TV products if connected to this product with Anynet function turning the TV on may display a warning popup message saying no connection was found Still Anynet connection is properly established and available to use BD Data Management Enables you to manage the downloaded contents you accessed through a Blu ray disc that supports the BD LIVE service and stored on a
42. ory default settings are restored all stored user BD data is deleted Repairs If you contact us to repair your player an administration fee may be charged if either 1 An engineer is called out to your home at your request and there is no defect in the product 2 You bring the unit to a repair center and there is no defect in the product We will provide you with the amount of the administration fee before we make a home visit or begin any work on your player We recommend you read this manually thoroughly search for a solution on line at www samsung com or contact Samsung Customer Care at 1 800 SAMSUNG 726 7864 before seeking to repair your player 17 Specifications Compliance and Compatibility Notice Power Requirements AC 120V 60Hz Power Consumption 10 5W Weight 2 2 Ibs General Dimensions 10 6 W X 7 6 D X 1 6 H inches Operating Temperature Range 41 F to 95 F Operating Humidity Range 10 to 75 Type A USB 2 0 USB re a DC output 5V 500mA Max Video 1080p 10801 720p 480p HDMI Audio PCM Bitstream Network Wireless LAN Bulit in Network speeds equal to or below 10Mbps are not supported Design and specifications are subject to change without prior notice Weight and dimensions are approximate Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or call 877 278 0799 18 NOT ALL discs are compati
43. pe with a soft cloth When cleaning wipe gently the apparatus the apparatus has been e Holding Discs or cause skipping fingerprints will not get on the surface on a disc clean it with a mild from the inside to the outside of the disc e Disc Storage Do not keep in direct sunlight Keep in a cool ventilated area Keep in a clean protection jacket and store vertically Handling Cautions e Do not expose this apparatus to dripping or splashing Do not put objects filled with liquids such as vases on the apparatus e To turn this apparatus off completely you must pull the power plug out of the wall socket Consequently the power plug must be easily and readily accessible at all times e Do not plug multiple electric devices into the same wall socket Overloading a socket can cause it to overheat resulting in a fire e Maintenance of Cabinet Before connecting other components to this player be sure to turn them off If you move your player suddenly from a cold place to a warm place condensation may occur on the operating parts and lens and cause abnormal disc playback If this occurs unplug the player wait for two hours and then connect the plug to the power outlet Then insert the disc and try to play back again e fthe product makes an abnormal noise or produces a burning smell or smoke turn off the power switch immediately and disconnect the power plug from the wall outlet Then conta
44. pling rates over 48kHz the player may output 48kHz downsampled PCM audio even though you set PCM Downsampling to Off Dynamic Range Control You can listen at low volumes but still hear dialog clearly This is only active if your player detects a Dolby Digital signal Downmixing Mode Select the Downmix method for stereo output Network Settings Please contact your ISP to find out if your IP address is static or dynamic If it is dynamic and most are we recommend using the Auto procedure for network setup This is easiest and will work in the majority of cases If it is static you must use the manual set up procedure See page 11 Network setup directions start below NOTE This unit can only be connected to a Network via a wireless connection Automatic Network Setup 1 Inthe Home menu press the lt gt buttons to select Settings and then press the J button 2 Press the 4V buttons to select Network and then press the E button 3 Press the A Y buttons to select Network Setting and then press the button The Network Setting screen appears 46 Settings Network Setting Not Selected nternet Protocol Setup Auto IP Address 0 0 0 Subnet Mask SER 0 0 Gateway 0 0 0 DNS Auto DNS Server _0 0 0 E WPS PBC Move Select D Access Point Selection JBE k eturn Select Access Point Se
45. rd reader may cause the reader to operate improperly The player does not support the PTP protocol Do not disconnect a USB device during a loading process The bigger the image resolution the longer the image takes to display This player cannot play MP3 files with DRM Digital Rights Management downloaded from commercial sites Your player only supports video with a frame rate under 30fps frames per second Your player only supports USB Mass Storage Class MSC devices such as thumb drives and USB HDD HUB is not supported Certain USB HDD Devices multi card readers and thumb drives may not be compatible with this player If some USB devices require excessive power they may be limited by the circuit safety device If playback from a USB HDD is unstable provide additional power by plugging the HDD into a wall socket If the problem continues contact the USB HDD manufacturer You must remove the USB storage device safely by performing the Safely Remove USB function to prevent possible damage to the USB memory Press the HOME button to move to the home screen press the YELLOW C button and then press the 9 button e SAMSUNG is not responsible for any data file damage or data loss e Your player does not support NTFS compressed files sparse files or encrypted files e You can repair or format a USB device on your Desktop PC MS Windows OS only Video File Support File Extension Video Codec Au
46. ted by the TV A long HDMI cable may cause screen noise If this occurs set Deep Color to Off in the menu f you use an HDMI to DVI cable to connect to your display device you must also connect the Digital Audio Out to an audio sytem to hear audio B Connecting to an Audio System e Please turn the volume down when you turn on the AV receiver A sudden loud sound may cause damage to the speakers and your ears e Please set the audio format according to the capabilities of your AV receiver e The position of HDMI input terminals may vary depending on your AV receiver Please refer to the user manual of your AV receiver Connecting to an Audio System HDMI supported AV receiver 1 Using an HDMI cable connect the HDMI OUT terminal on the rear of the player to the HDMI IN terminal of your AV receiver See page 8 2 Using an HDMI cable connect the HDMI OUT terminal of the AV receiver to the HDMI IN terminal of your TV 3 Turn on the player TV and AV receiver 4 Using the input select button of the AV receiver and TV select the correct HDMI input or source on each to hear sound and see video from the player Refer to your AV receiver s user manual to set the AV receiver s audio input 5 Ifthis is the first time you have turned on the Blu ray player the Initial Settings screen appears See page 8 C Connecting to a Network This player lets you use network based services such as BD LIVE and download software
47. ter 3 Unzip the zip archive to your computer You should have a single RUF file with the same name as the zip file 4 Copy the RUF file to a USB flash drive 5 Make sure there is no disc in the player and then insert the USB flash drive into the USB port of the player 6 In the players menu go to Settings gt Support gt Software Upgrade 7 Select By USB 13 NOTE No disc should be in the product when you upgrade the software using the USB Host jack When the software upgrade is done check the software details in the software Upgrade menu Do not turn off the player during the software upgrade It may cause the player to malfunction Software upgrades using the USB Host jack must be performed with a USB flash memory stick only Auto Upgrade Notification If you have connected the player to your network and then set Auto Upgrade Notification on the player automatically notifies you when a new software version is available for the player To set Auto Upgrade Notification on follow these steps 1 Select Auto Upgrade Notification and then press the J button 2 Use the AY buttons to select On and then press the EJ button If there is a new software version available the player notifies you with a popup message 1 To upgrade the firmware select Yes in the Pop up The player turns off automatically then restarts and begins the download Never turn on the player manually her
48. the disc menu and then press the E button Rear Panel o lee USB HDMI OUT HDMI OUT USB HOST amp NOTE 6 You can perform software upgrades using the USB Host jack with a USB flash memory stick only Remote Control Tour of the Remote Control Turn the player on and off Press to eject a disc Press numeric buttons to operate options Use to enter the disc menu Press to skip backwards or forwards Press to stop a disc Press to play a disc Press to move to the home menu Press to use Tools menu Use to select menu items and change menu values Return to the previous menu These buttons are used both for menus on the player and also several Blu ray Disc functions Allows you to repeat a title chapter track or disc Use to access various audio functions on a disc Blu ray Disc DVD Installing batteries Turn the TV on and off After setup allows you to set the input source on your TV TV volume adjustment Use to enter the popup menu title menu Press to search a disc backwards or forwards Press to pause a disc Press to use Netflix Press to use Pandora Use to display the playback information when playing a Blu ray Disc DVDs Press to exit the menu Press to see the full screen on a TV Press to switch the Blu ray Disc DVD s subtitle language SAMSUNG 9 NOTE f the remote does not operate properly e Check the polarity
49. to access the device will be displayed Press the lt gt button to select Yes then press the J button If you have a disc in the Blu ray player press the RED A or BLUE D button If you do not go to Step 6 If you pressed the RED A button go to Step 5 If you pressed the BLUE D button go to Step 4 PANDORA You Tube Press the A V buttons to select USB then press the amp J button Press the lt gt buttons to select Videos Music or Photos then press the button Go to Step 7 If you pressed the BLUE D button the screen below appears Go to 5 Press the gt buttons to select USB then press the J button Press the AY buttons to select Videos Music or Photos then press the button The controls and tools you use to play videos music and pictures located on a USB device are identical to those you use to play videos music and pictures on a disc See pages 15 16 9 NOTE You must remove the USB storage device Safely by performing the Safely Remove USB function in order to prevent possible damage to the USB memory Press the MENU bution to move to the Home menu select the YELLOW C button and then press the J button When Audio CD CD DA MP3 or JPEG files are in stop mode pressing the FULL SCREEN button on the remote will not bring up a full screen picture f you insert a disc when playing a USB storage device the device mode changes to DVD or
50. uipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception which can be determined by turning the equipment off and on The user is encouraged to try to correct the interference by one or more of the following measures Note to CATV system installer This reminder is provided to call CATV system installer s attention to Article 820 40 of the National Electrical Code Section 54 of Canadian Electrical Code Part that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical 2 CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Complies with 21CFR 1040 10 except for deviations pursuant to Laser Notice No 50 dated June 24 2007 DANGER e VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM FDA
51. usic content located on a DVD USB or PC Buttons on the Remote Control used for Music Playback NUMBER buttons Audio CD CD DA only o During Playlist playback press the desired track number The selected track is played Skip During playback press the or GJ button to move to the previous or next file of the playlist button Stops a track Fast Play Audio CD CD DA only During playback press the QJ or ES button Each time you press the E9 or O3 button the playback speed will change Pause Pauses a track O button Plays the currently selected track MP3 1 During Playlist playback press the TOOLS button gt Diaulint 1 6 nxn Le Ja Repeat Mode 4 Off gt iz so 7 Information TRACK 004 gt Owes N z 03 17 TRACK 006 03 35 Pause Tools gt Return 2 Press the lt gt buttons to select Repeat Mode 3 Press the EJ button songs are played in the order ou in which they were recorded CH One Song CD All The current song is repeated All songs are repeated The random option plays m 3G Shuffle Mode songs in random order 15 Playlist 1 To move to the Music List press the J or RETURN button The Music List screen appears _ Music TRACK 001 1 2 Page TRACK OUI TRACK O01 JZ 02 38 0238 mo
52. vice TV monitor etc HDMI Deep Color Lets you output video from the HDMI OUT jack with Deep Color Deep Color provides more accurate color reproduction with greater color depth Progressive Mode Lets you improve picture quality when viewing DVDs Audio Settings Digital Output Set the Digital Output to match the capabilities of the AV receiver you ve connected to the player For more details please refer to the Digital Output Selection table below Digital Output Selection Bitstream AUSUER PCM Unprocessed Re encoded p DTS Up to PCM 7 1ch PCM DTS re encoded DTS re encoded Dolby Digital PCM 2ch Dolby Digital Dolby Digital Plus PCM 2ch Dolby Digital Plus DTS re encoded Audio Stream on Blu ray Dolby TrueHD PCM 2ch Dolby TrueHD Disc N PCM 2ch PCM 2ch on DVD Dolby Digital PCM 2ch Dolby Digital Definition for Blu ray Disc Decodes the main Outputs only the main feature Kan Un an BONUSVIEW audio Decodes the main feature audio stream so that your en audio and BONUSVIEW AV receiver can decode the 9 i oO PCM audio and adds Any audio stream together audio bitstream NEON Sound into PCM audio and adds You will not hear BONUSVIEW I BR ner Effects then re Navigation Sound Effects audio or Navigation Sound Effects encodes the PCM l audio into DTS bitstream 10 DTS re encoded PCM 2ch DTS DTS re encoded en Hi PCM 2ch DTS HD Hi Resolution Audio DTS re encoded Resolution Audio g H PCM 2ch DTS H
Download Pdf Manuals
Related Search